Elevating performance of electrochemical immunosensor via photo-induced microscale hyperthermia in situ

Application of Fenton chemistry in electrochemical determination of pyrophosphatase activity and fluoride

Fenton chemistry has aroused widespread concern due to its application in the green oxidation and mineralization of organic wastes. Inorganic pyrophosphatase (PPase) catalyzes the hydrolysis of pyrophosphate ions (PPi) and provides a thermodynamic driving force for many biosynthetic reactions. Fluoride (F-) is widely applied to fight against tooth decay and reduce cavities. The electrochemical determination of PPase activity and F- was realized based on Fenton chemistry in this work. Glassy carbon electrode modified with poly (azure A) and acetylene black (GCE/PAA-AB) was fabricated. Hydroxyl radicals (∙OH) that were generated from a Cu2+-catalyzed Fenton-type reaction could oxidize PAA in the near-neutral medium, leading to a great increase of the cathodic peak current (Ipc). A coordination reaction between PPi and Cu2+ exerted a negative effect on Fenton reaction and hindered the Ipc enhancement. Cu2+-PPi complex was decomposed due to the hydrolysis of PPi induced by PPase, which caused the reappearance of the notably increased current response. F- could effectively inhibit PPase activity. As a result, the stable Cu2+-PPi complex remained and the high Ipc suffered from the decline again. The Ipc difference was used for the highly sensitive determination of PPase activity in the content range of 0.001-20 mU mL-1 with a detection of limit (LOD) at 0.6 μU mL-1 and that of F- in the concentration range of 0.01-100 μM with a LOD at 7 nM. The proposed PPase and F- sensor displayed a good selectivity, stability and reproducibility, and a high accuracy.

Quantification of Glycated Hemoglobin in Total Hemoglobin by a Simultaneous Dual-Signal Acquisition Approach

The glycated hemoglobin (HbA1c) level, which is defined as the ratio of HbA1c to total hemoglobin (tHb, including glycated and unglycated hemoglobin), is considered one of the preferred indicators for diabetes monitoring. Generally, assessment of the HbA1c level requires separate determination of tHb and HbA1c concentrations after a complex separation step. This undoubtedly increases the cost of the assay, and the loss or degradation of HbA1c during the separation process results in a decrease in the accuracy of the assay. Therefore, this study explored a dual-signal acquisition method for the one-step simultaneous evaluation of tHb and HbA1c. Quantification of tHb: graphene adsorbed carbon quantum dots and methylene blue were utilized as the substrate material and linked to the antibody. tHb was captured on the substrate by the antibody. The unique heme group on tHb catalyzed the production of •OH from H2O2 to degrade methylene blue on the substrate, and a quantitative relationship between the tHb concentration and the methylene blue oxidation current signal was constructed. Quantification of HbA1c: complex labels with HbA1c recognition were made of ZIF-8-ferrocene-gold nanoparticles-mercaptophenylboronic acid. The specific recognition of the boronic acid bond with the unique cis-diol structure of HbA1c establishes a quantitative relationship between the oxidation current of the label-loaded ferrocene and the concentration of HbA1c. Thus, the HbA1c level can be assessed with only one signal readout. The sensor exhibited extensive detection ranges (0.200-600 ng/mL for tHb and 0.100-300 ng/mL for HbA1c) and low detection limits (4.00 × 10-3 ng/mL for tHb and 1.03 × 10-2 ng/mL for HbA1c).

Facile and portable multimodal sensing platform driven by photothermal-controlled release system for biomarker detection

Portable, maneuverable and reliable versatile-integrated analytical devices are urgently demanded but still extremely challenging to meet the requirements of point-of-care testing in resource-limited areas. Herein, a multifunctional sensing platform with excellent photothermal performance was implanted into the miniature zone of a paper-based electrochemiluminescent (ECL) biosensor for accurate detection of interleukin-6, which could flexibly interconnect the visualized distance and temperature readout with ultrasensitive ECL response. Concretely, the multipurpose MBene and TaSe₂ composites (MBene@TaSe₂) prepared via self-assembly approach as target-associated photothermal element was introduced in the paper-based analytical device (PAD) and served as multi-signals trigger. Under the laser irradiation, MBene@TaSe₂ probe not only generated heat for rapid temperature output, but also triggered the phase transition behavior of thermoresponsive poly (N-isopropylacrylamide) (pNIPAM) hydrogel to release loaded malachite green (MG) dye for distance-based visual readout. Simultaneously, the released MG was also utilized as effective quencher to decrease the ECL signal of luminol. Benefitting from this dexterous architecture, the speedy preliminary screening and precise quantitative analysis could be subsequently obtained in single-drop sample through one-step sandwich immunoreaction, which avoids additional separation operations and greatly simplifies the analysis procedure. Undeniably, this work provides ingenious insights for advancing the development of convenient and fast multifunction-integrated PAD in family surveillance and intelligent diagnosis.

A novel electrochemical sensor based on process-formed laccase-like catalyst to degrade polyhydroquinone for tumor marker

Methods to improve the sensitivity of electrochemical sensors based on catalytic reactions generally require adscititious or pre-modified catalysts, which make the sensitive detection of sensors extremely challenging. This is because the activity of the catalyst is susceptible to the storage and modification process, such as aggregation during storage or loss of active sites during multi-step modification, which impairs the performance of the sensor. To solve this thorny issue, a novel electrochemical sensor based on a process-formed laccase-like catalyst was constructed for sensitive detection of tumor markers. Cu²⁺-polydopamine (CuPDA) combined with antibody (Ab₂) were employed as copper-containing immunoprobe, which released Cu(Ⅱ) ions under acidic stimulation. Cu(Ⅱ) ions coordinate with the self-assembly cationic diphenylalanine-glutaraldehyde nanospheres (CDPGA) to form a laccase-like catalyst, which had stronger catalytic activity than laccase. The freshly formed catalyst was immediately used to degrade the polyhydroquinone-reduced graphene oxide (PHQ-rGO) composite, resulting in a significant reduction in the current signal. The PHQ-rGO composite plays dual roles of signal substance and substrate on the sensing interface. The proposed electrochemical sensor demonstrated wide linearity for the determination of a model analyte, human epididymis protein 4 (HE4), from 1 pg mL^-1 to 100 ng mL^-1, and the detection limit was as low as 0.302 pg mL^-1 (S/N = 3), which had good consistency with that of electrochemiluminescence method. This process-formed catalyst approach will have potential reference significance for the construction of other sensors.

Fenton reaction-mediated dual-attenuation of signal for ultrasensitive amperometric immunoassay

In order to alter the complexion of immunoprobe with large impedance as negative factor in sensitivity of amperometric immunosensor, a strategy of Fenton reaction-mediated dual-attenuation of signal was proposed. Herein, metal-polydopamine-Fe³⁺ composite with the ability of Fenton reaction was initially prepared as immunoprobe for an ultrasensitive immunoassay. The polymerization of dopamine occurred on the surface of ZIF-67 to gain the metal-polydopamine shell, which possessed rich functional groups, negative charge and high specific surface. Then the prepared functional shell was further used to absorb Fe³⁺ and immobilize labeling antibody as immunoprobe, which was used to construct a sandwich type immunosensor. With addition of H₂O₂ and aniline, Fenton reaction was triggered to produce hydroxyl radicals, which can not only decrease the current value by degrading methylene blue molecules, but also further initiate aniline to polymerize into non-conductive polyaniline for successive abatement of signal intensity. Therefore, the dual-attenuation of signal model rendered the immunoprobe into a favorable factor and synchronously enhance sensitivity. Expectedly, the detection performance with a linear range from 1.0 × 10^-4-100 ng mL^-1 and ultralow detection limit of 9.07 × 10^-5 ng mL^-1 toward neuron-specific enolase was obtained under optimal conditions. This work offered a novel tactic for enhancing sensitivity of immunosensor through the preparation of functional immunoprobe and its rational utilization as signal enhancer.

In situ amplified photothermal immunoassay for neuron-specific enolase with enhanced sensitivity using Prussian blue nanoparticle-loaded liposomes

Methods based on prussian blue nanoparticles (PBNPs) have been reported for photothermal immunoassays in analytical nanoscience fields but most suffer from low sensitivity and are not beneficial for routine use.