Assembly of black phosphorus quantum dots-doped MOF and silver nanoclusters as a versatile enzyme-catalyzed biosensor for solution, flexible substrate and latent fingerprint visual detection of baicalin

Zwitterionic polymers grafting of metal organic framework encapsulated boronic acid carbon dots as antibiofouling fluorescent probe for baicalin monitoring

The sensitivity and accuracy of fluorescence probes for biological samples are affected by not only interfering molecule compounds but also the nonspecific adsorption of proteins and other macromolecules. Herein, fluorescence probe based on zwitterionic sulfobetaine methacrylate polymer (PSBMA) as an antibiofouling layer and amino boric acid carbon dots encapsulated in the metal-organic framework UiO-66-NH2 (UiO-66-NH2/BN-CDs) as a target recognition site was designed for the detection of baicalin (BAI). Owing to the introduction of BN-CDs into UiO-66-NH2 with high specific surface area, the prepared UiO-66-NH2/BN-CDs@PSBMA probe exhibited a high adsorption capacity of 78.9 mg g-1, while presented fluorescence enhancing and superior fluorescence selectivity to BAI at excitation and emission wavelengths of 400 and 425 nm, respectively. Connecting PSBMA with good hydrophilicity to UiO-66-NH2, resulted in an anti-protein capacity of over 96.3 %, effectively inhibiting protein interference with the fluorescence signal. By virtue of its good antibiofouling and recognizing capacities, the fluorescence probe exhibited a satisfactory detection range of 10-80 nmol L-1, with a fairly low detection limit of 0.0064 μmol L-1. Using the method to detect BAI in Goji berry, Sophora and Yinhuang oral solution, demonstrating its potential for the accurate and quantitative detection of BAI in complex biological samples.

Instant in situ highlighting of latent fingerprints by a green fluorescent probe based on aggregation-induced emission

Fluorescence sensing of latent fingerprints (LFPs) has gained extensive attention due to its high sensitivity, non-destructive testing, low biotoxicity, ease of operation, and the potential for in situ visualization. However, the realization of in situ visualization of LFPs especially with green emission and rapid speed is still a challenge. Herein, we synthesized an amphibious green-emission AIE-gen TPE-NI-AOH (PLQY = 62%) for instant in situ LFP detecting, which integrates the excellent fluorescence properties of naphthalimide (NI) with a hydrophilic head and the AIE character as well as the donating property of tetraphenylethene (TPE). TPE-NI-AOH in ethanol/water binary solvent was used as an environmentally friendly LFP developer and achieved in situ green-fluorescence visualization of LFPs. The fluorescence signal achieves its 60% saturated intensity in 0.37 s and nearly 100% in 2.50 s, which is an instant process for the naked eye. Moreover, level 3 details and super-resolution images of LFPs could be observed clearly. Besides, the TPE-NI-AOH developer could be stored for at least 6 months, suitable for long-term storage. This instant in situ highlighting method does not require post-processing operations, providing a more convenient, rapid, and efficient detection method of LFPs. This work would inspire the further advancement of fluorescent sensors for fingerprint imaging.

Emerging Doped Metal-Organic Frameworks: Recent Progress in Synthesis, Applications, and First-Principles Calculations

Metal-organic frameworks (MOFs) are crystalline porous materials with a long-range ordered structure and excellent specific surface area and have found a wide range of applications in diverse fields, such as catalysis, energy storage, sensing, and biomedicine. However, their poor electrical conductivity and chemical stability, low capacity, and weak adhesion to substrates have greatly limited their performance. Doping has emerged as a unique strategy to mitigate the issues. In this review, the concept, classification, and characterization methods of doped MOFs are first introduced, and recent progress in the synthesis and applications of doped MOFs, as well as the rapid advancements and applications of first-principles calculations based on the density functional theory (DFT) in unraveling the mechanistic origin of the enhanced performance are summarized. Finally, a perspective is included to highlight the key challenges in doping MOF materials and an outlook is provided on future research directions.

Smartphone Imaging Device for Multimodal Detection of Hydrogen Sulfide Using Cu-Doped MOF Sensors

Multimodal sensing platforms may offer reliable, fast results, but it is still challenging to incorporate biosensors with high discriminating ability in complex biological samples. Herein, we established a highly sensitive dual colorimetric/electrochemical monitoring approach for the detection of hydrogen sulfide (H2S) utilizing Cu-doped In-based metal-organic frameworks (Cu/In-MOFs) combined with a versatile color selector software-based smartphone imaging device. H2S can result in the enhancement of the electrochemical signal because of the electroactive substance copper sulfide (CuxS), the decrease of the colorimetric signal of the characteristic absorption response caused by the strong coordination effect on Cu/In-MOFs, and the obvious changes of red-green-blue (RGB) values of images acquired via an intelligent smartphone. Attractively, the Cu/In-MOFs-based multimodal detection guarantees precise and sensitive detection of H2S with triple-signal detection limits of 0.096 μM (electrochemical signals), 0.098 μM (colorimetric signals), and 0.099 μM (smartphone signals) and an outstanding linear response. This analytical toolkit provides an idea for fabricating a robust, sensitive, tolerant matrix and reliable sensing platform for rapidly monitoring H2S in clinical disease diagnosis and visual supervision.

Nanocluster/metal-organic framework nanosheet-based confined ECL enhancement biosensor for the extracellular vesicle detection

Gastric cancer (GC) was one of the most common cancers with high mortality. The detection of GC peritoneal metastasis had important significance. In this work, we have developed the novel electrochemiluminescence (ECL) biosensor to detect microRNA in GC extracellular vesicle (EV). Firstly, in situ growth of Cu nanocluster (Cu NC) on the metal-organic frameworks (MOFs) nanosheet was achieved successfully. Due to the confinement effect, Cu NCs in the porous structure of Zn MOF possessed the high quantum yield and good stability. Meanwhile, Zn MOF provided good electrochemical activity for the ECL reaction. Furthermore, the nanosized MOFs did not only act as sensing platform to load Cu NCs and link biomolecules, but also reduce steric hindrance effect for biomolecular recognition. Additionally, Au NPs/MXene and phospholipid layer were prepared and modified on the electrode, which can regulate electron transfer and improve the target recognition efficiency. The Cu NCs/Zn MOF nanosheet-based ECL sensor was employed to detect miRNA-421 from 1 fM to 1 nM with a detection limit of 0.5 fM. Finally, extracellular vesicles form clinic GC patient ascites were extracted and analyzed. The results showed that the constructed biosensor can be used for the GC peritoneal metastasis diagnosis.

Development of dual-mode ELISA based on ALP-catalyzed APP hydrolysis for IL-6 detection

Sensitive and accurate detection of interleukin 6 (IL-6) is crucial for the early diagnosis of cerebral infarction to improve patient survival rates. However, the low-abundance of IL-6 in cerebral infarction presents a significant challenge in developing effective diagnosis method. Herein, we studied and analyzed the strong fluorescence property of 4-aminophenol phosphate (APP) and developed an enzyme-linked immunosorbent assay (ELISA) for IL-6 detection. The detection was based on the integration of optical signal change induced by alkaline phosphatase (ALP)-catalyzed APP hydrolysis and ALP-mediated ELISA. The generated colorimetric signal of 4-aminophenol, APP hydrolysis product, was used for ELISA of IL-6 with a detection limit of 0.1 ng/mL, and the visual detection of IL-6 was achieved. The changes in APP fluorescence have a good linear relationship with the logarithm of IL-6 concentration in the range of 0.005 ng/mL to 5.0 ng/mL, with a detection limit of 0.001 ng/mL, which was 100 times lower than that of conventional pNPP-based ELISA. Furthermore, the constructed ELISA effectively distinguished between samples from patients with cerebral infarction and volunteers with non-cerebral infarction, and the severity of symptoms was well distinguished based on IL-6 measurement. The dual-mode ELISA demonstrated high feasibility of low-abundance biomarker detection and displayed good potential for accurate in vitro diagnosis.

An optical sensing platform for the detection of anti-cancer drugs and their cytotoxicity screening using a highly selective phosphorene-based composite

Monitoring therapeutic drugs and their elimination is crucial because they may cause severe side effects on the human body. Methotrexate (MTX) is a widely used anti-cancer drug, which is highly expensive, and the detection of unwanted overdoses of MTX using traditional procedures is time-consuming and involves complex instrumentation. In this work, we have developed a nanocomposite material using phosphorene, cystine, and gold (Ph-Cys-Au) that shows excellent optical properties. This nanocomposite can be used as an optical sensing platform for the detection of MTX in the range 0-260 μM. The synthesized sensing platform is very sensitive, selective, and cost-effective for the detection of MTX. Ph-Cys-Au can effectively detect MTX in aqueous media with a limit of detection (LOD) of about 0.0266 nM (for a linear range of 0-140 μM) and 0.0077 nM (for a linear range of 160-260 μM). The nanocomposite is equally selective for real samples, such as human blood serum (HBS) and artificial urine (AU) with a LOD of 0.0914 nM and 0.0734 nM, respectively. We have also determined the limit of quantification (LOQ); the LOQ values for the aqueous media were 0.0807 nM (for a linear range of 0-140 μM) and 0.0234 nM (for a linear range of 160-260 μM), whereas, the values for HBS and AU were around 0.2771 nM and 0.2226 nM, respectively. Moreover, the nanocomposite also provides a feasible platform for cytotoxicity screening in cancerous cells (Caco-2 cell lines) and non-cancerous cells (L-929 cell lines).

High-definition and robust visualization of latent fingerprints utilizing ultrabright aggregation-induced emission of iridium developer

Creation of AIEgens with high brightness is compactly related to acquiring optimum AIE capabilities and still faces challenges. This study proposes an ingenious structurally regulative approach for preparing ultrabright AIEgens, taking iridium complexes as the model. The incremental rotational activity of substituents obtained by fine adjustment of the stereoscopic configuration efficaciously activates the AIE of iridium complexes and synchronously imparts high-brightness luminescence. Subsequently, benefitting from the ultrabright AIE, high-resolution visualization of latent fingerprints (LFPs) is achieved on diverse substrates by transient immersion in a solution of the AIE-active iridium complex (Ir3) for 60 s. The LFPs stained by Ir3 are integral and distinct enough to possess level 1-3 detail features, which allow precisely realizing personal identification. The LFP photograph emerges inconspicuous attenuation of contrast when aged under ambient light for 10 days and then being continuously irradiated with high-power ultraviolet light for 1 h, reflecting extraordinary aging resistance. Notably, the ultrabright AIE of Ir3 with room-temperature phosphorescence feature successfully achieves enhanced visualization of local fingerprint details with ultrahigh contrast. This LFP visualization protocol based on the ultrabright AIEgens is practical and provides a reliable solution for forensic investigations in actual scenarios.

Baicalin-Current Trends in Detection Methods and Health-Promoting Properties

Baicalin (7-D-glucuronic acid-5,6-dihydroxyflavone) belongs to natural flavonoids extracted from the roots of Scutellaria baicalensis, the plant used in traditional Chinese medicine. It has been proven that baicalin has various pharmacological activities, such as antioxidant, anti-inflammatory, anticancer, antibacterial, and anti-apoptotic ones. However, it is essential not only to determine the medical usefulness of baicalin, but also to find and develop the most effective methods for its extraction and detection. Therefore, the aim of this review was to summarize the current methods of detection and identification of baicalin and to present the medical applications of baicalin and the underlying mechanisms of its action. Based on the review of the latest literature, it can be concluded that liquid chromatography alone or together with mass spectrometry is the most commonly used method for the determination of baicalin. Recently, also new electrochemical methods have been established, e.g., biosensors with fluorescence, which have better detection limits, sensitivity, and selectivity.

Exosomes incorporated with black phosphorus quantum dots attenuate retinal angiogenesis via disrupting glucose metabolism

Black phosphorus quantum dots (BPQDs) have shown potential in tumor therapy, however, their anti-angiogenic functions have not been studied. Although BPQDs are easily degraded to non-toxic phosphrous, the reported toxicity, poor stability, and non-selectivity largely limit their further application in medicine. In this study, a vascular targeting, biocompatible, and cell metabolism-disrupting nanoplatform is engineered by incorporating BPQDs into exosomes modified with the Arg-Gly-Asp (RGD) peptide (BPQDs@RGD-EXO nanospheres, BREs). BREs inhibit endothelial cells (ECs) proliferation, migration, tube formation, and sprouting in vitro. The anti-angiogenic role of BREs in vivo is evaluated using mouse retinal vascular development model and oxygen-induced retinopathy model. Combined RNA-seq and metabolomic analysis reveal that BREs disrupt glucose metabolism, which is further confirmed by evaluating metabolites, ATP production and the c-MYC/Hexokinase 2 pathway. These BREs are promising anti-angiogenic platforms for the treatment of pathological retinal angiogenesis with minimal side effects.

Highly Sensitive Detection of Chymotrypsin Based on Metal Organic Frameworks with Peptides Sensors

In this study, peptides and composite nanomaterials based on copper nanoclusters (CuNCs) were used to detect chymotrypsin. The peptide was a chymotrypsin-specific cleavage peptide. The amino end of the peptide was covalently bound to CuNCs. The sulfhydryl group at the other end of the peptide can covalently combine with the composite nanomaterials. The fluorescence was quenched by fluorescence resonance energy transfer. The specific site of the peptide was cleaved by chymotrypsin. Therefore, the CuNCs were far away from the surface of the composite nanomaterials, and the intensity of fluorescence was restored. The limit of detection (LOD) using Porous Coordination Network (PCN)@graphene oxide (GO) @ gold nanoparticle (AuNP) sensor was lower than that of using PCN@AuNPs. The LOD based on PCN@GO@AuNPs was reduced from 9.57 pg mL^-1 to 3.91 pg mL^-1. This method was also used in a real sample. Therefore, it is a promising method in the biomedical field.

Ratiometric upconversion luminescence nanoprobes from construction to sensing, imaging, and phototherapeutics

In terms of the combined advantages of upconversion luminescence (UCL) properties and dual-signal ratiometric outputs toward specific targets, the ratiometric UCL nanoprobes exhibit significant applications. This review summarizes and discusses the recent advances in ratiometric UCL nanoprobes, mainly including the construction of nanoprobe systems for sensing, imaging, and phototherapeutics. First, the construction strategies are introduced, involving different types of nanoprobe systems, construction methods, and ratiometric dual-signal modes. Then, the sensing applications are summarized, involving types of targets, sensing mechanisms, sensing targets, and naked-eye visual detection of UCL colors. Afterward, the phototherapeutic applications are discussed, including bio-toxicity, bio-distribution, biosensing, and bioimaging at the level of living cells and small animals, and biomedicine therapy. Particularly, each section is commented on by discussing the state-of-the-art relevant studies on ratiometric UCL nanoprobe systems. Moreover, the current status, challenges, and perspectives in the forthcoming studies are discussed. This review facilitates the exploration of functionally luminescent nanoprobes for excellent sensing, imaging, biomedicine, and multiple applications in significant fields.

Metal-Doped Boron Quantum Dots for Versatile Detection of Lactate and Fluorescence Bioimaging

To improve the stability and fluorescence (FL) of monoelemental boron nanomaterials, this work put forward a metal-coordination strategy to explore emerging metal-doped boron quantum dots, Co@BQDs. Through theoretical calculations, B-Co bonding as predicted can suppress the B-O reaction and protect the electronic structures of exfoliated two-dimensional (2D) boron from oxidation and decomposition upon exposure to oxygen. In experimental studies, Co²⁺ was added into a dispersion liquid of bulk boron and subjected to probe sonication to promote Co²⁺ adsorption on the surface of exfoliated 2D boron, followed by Co²⁺ coordination with exposed boron atoms. Solvothermal treatment of exfoliated 2D boron resulted in the generation of Co²⁺-doped 0D boron Co@BQDs. Experimental results confirm that Co@BQDs have higher colloidal and FL stability than BQDs as a reference. B-Co bonding formation to suppress the B-O reaction ensures the high stability of exfoliated boron structures. A dispersion liquid of Co@BQDs with stable and bright FL was used for visual FL imaging of solutions and solid substrates. Based on enzymatic and cascade oxidation-induced FL quenching of Co@BQDs, a novel FL bio-probe of lactate was explored. This bio-probe, with a broad detection range of 0.01-10 mM and a low detection limit of 3.1 μM, enables FL sensing of lactate in biosamples and shows high detection recoveries of 98.0-102.8%. Moreover, this bio-probe realized versatile FL imaging and visual detection of lactate in liquid/solid-phase systems. These results demonstrate great prospects of Co@BQDs as emerging and efficient imaging reagents for long-term tracking and bioimaging applications.

Black phosphorus quantum dots cause glucose metabolism disorder and insulin resistance in mice

Black phosphorus quantum dots (BPQDs) are considered to have wide application prospects due to their excellent properties. However, there is no study on the effect of BPQDs on glucose metabolism. In this study, blood glucose was significantly increased when mice were continuously intragastrically administered 0.1 and 1 mg/kg bw BPQDs. The blood glucose level of the mice was elevated from Day 7 to Day 28. BPQD exposure also decreased the area under the curve (AUC) of the oral glucose tolerance test (OGTT). After exposure, the pancreas somatic index was increased. Moreover, the serum insulin and glucagon levels were elevated and the relative area of islet β cells was increased in BPQD-exposed mice, while insulin signaling cascades were reduced in muscle tissues. In summary, our study demonstrated for the first time that BPQD exposure induces glucose disorder and insulin resistance in muscle, which is helpful to understand the biosafety of black phosphorus nanomaterials and promote the sustainable development of nanotechnology.

Obtaining Water from Air Using Porous Metal-Organic Frameworks (MOFs)

Water collection from moisture in air, i.e., atmospheric water harvesting, is an urgent future need for society. It can be used for water production everywhere and anytime as an alternative water source in remote areas. However, water harvesting and collection usually relies on desalination, fog, and dewing harvesting, which are energy intensive. In this respect, metal-organic frameworks (MOFs) have broad applicability for water harvesting in water-scarce areas; therefore, the current discussion focuses on this approach. Furthermore, recent progress on MOFs for moisture harvesters is critically discussed. In addition, the design, operation, and water harvesting mechanisms of MOFs are studied. Finally, we discuss critical points for future research for the design of new MOFs as moisture harvesters for use in practical applications. MOF adsorbents offer excellent operating capacity in various temperature and pressure ranges. Rational water harvesters can thus be developed by adjusting structural properties such as the porosity, functionalities, and metal centers, thereby enabling new devices to produce water even in remote areas.

A label-free dual-modal aptasensor for colorimetric and fluorescent detection of sulfadiazine

Sulfadiazine (SDZ) residues in food products and the environment pose a serious threat to human health and ecological balance, thereby warranting the development of new methods for simple, rapid and accurate detection of these compounds. To this end, we developed a novel label-free dual-modal aptasensor for SDZ detection based on distance-dependent color change of gold nanoparticles (AuNPs) and fluorescence resonance energy transfer between AuNPs and rhodamine B (RhoB). In this aptasensor, the binding of the aptamer to SDZ causes unprotected AuNPs to aggregate in NaCl solution, which alters the color of the solution and restores the fluorescence of RhoB. Under optimal conditions, the aptasensor exhibited a linear colorimetric response in the SDZ concentration range of 50-1000 ng mL^-1, and a linear fluorescence response in the SDZ concentration range of 4-256 ng mL^-1. The limits of detection for colorimetric and fluorescent readings were 28 ng mL^-1 and 2 ng mL^-1 respectively. The recoveries of SDZ in the spiked real samples were 88.28-108.44% by colorimetry and 90.27-106.04% by fluorometry. Furthermore, the results of this aptasensor showed excellent correlation (R² ≥ 0.9858) with HPLC findings. Taken together, these experimental results demonstrate that the proposed label-free dual-modal aptasensor can be employed to screen for SDZ contamination in food and environmental samples.

A facile imine-linked covalent organic framework doped with a carbon dot composite for the detection and removal of Hg2+ in surface water

Hg2+ is one of the most toxic chemical species in the water environment, and thus developing a new fluorescent covalent organic framework for both the detection and removal of Hg2+ is highly desirable. Herein, a fluorescent composite, termed TpPa-1 COF@CDs, was synthesized by inverse emulsion polymerization method using an imine covalent organic framework as the supporting material and carbon dots as the fluorescent sensor element. The crystallinity, porosity, rich functional receptors (hydroxyl and amino groups), thermal stability and fluorescent properties of TpPa-1 COF@CDs were characterized. The results showed that TpPa-1 COF@CDs exhibited a good detection and removal performance for Hg2+, which was evidenced by its high sensitivity (LOD = 0.75 μg L-1), superior selectivity, large adsorption capacity (235 mg g-1), fast adsorption rate (30 min equilibrium time) and good regeneration (at least five cycles). More importantly, the simple functional monomer, short reaction time and metal-free raw material made TpPa-1 COF@CDs reliable, cost effective and eco-friendly. This research demonstrated the facile construction of a functional covalent organic framework composite for water environmental remediation technologies of metal pollution.

Gold nanoclusters encapsulated into zinc-glutamate metal organic frameworks for efficient detection of H2O2

Gold nanoclusters (AuNCs) have large Stokes shifts and long fluorescence life, which make them have high application value in bioanalytical applications. However, the quantum yield (QY) of AuNCs was lower, which hinders their wide application. Herein, a facile, novel and one-pot approach was developed to synthesize AuNCs@zinc-glutamate metal organic frameworks (AuNCs@ZnGlu-MOFs (product)). The product was easily prepared via mixing the glutathione (GSH) protected AuNCs with ZnGlu-MOF precursors. Compared with GSH-AuNCs, the ultrahigh QY (33.18%) of the AuNCs@ZnGlu-MOF is nearly 6 times higher. In addition, the product possesses better water stability and longer luminescence life (9.86 μs) due to the protective and confinement effects of the ZnGlu-MOF. Particularly, the product has a unique spatial structure, which can effectively prevent the interaction between large-size biothiols (such as cysteine and homocysteine) and the product, thus significantly improving the selectivity of it. Based on the excellent optical advantages of this product, it was capable of being applied as a selectable and sensitive fluorescence probe to detect H₂O₂ and H₂O₂-related analytes. This method has also been further employed in the precise H₂O₂-monitoring in serum, which is promising in the application of clinical bioassay.

Silver nanoparticles combined with amino-functionalized UiO-66 for sensitive detection of glutathione

Herein, a fluorescent nanosensor has been constructed for detection of glutathione (GSH) based on NH₂-UiO-66 and AgNPs. The NH₂-UiO-66 was synthesized where 2-amino-terephthalic acid as the organic ligand and Zr⁴⁺ as the center metal ions. The AgNPs can enhance the fluorescence of NH₂-UiO-66 based on metal enhanced fluorescence (MEF) effect. Moreover, in the present of GSH, the fluorescence of NH₂-UiO-66@AgNPs was quenched via electrostatic interaction and Ag-S reaction. The present sensing strategy shows good linear relation with the concentration of GSH in the range of 0.2-1.0 μM and 1.0-30 μM, and the limit of detection is 79 nM. Furthermore, our fluorescent nanosensor was utilized to detect GSH in human serum with a recovery of 96.8-102.5%. The results indicated that NH₂-UiO-66@AgNPs is successfully applied for high sensitive and selective detection of GSH in human serum.

Black phosphorous quantum dots for signal-on cathodic photoelectrochemical aptasensor monoitoring amyloid β peptide

In this paper, a quantitative cathodic photoelectrochemical aptasensor is described by using black phosphorous quantum dots (BPQDs) as photoactive material and assisted by heme as electron acceptor for sensing of amyloid β peptide (Aβ). Specifically, BPQDs were synthesized by solvothermal method and characterized by various techniques. The as-prepared BPQDs were assembled on the transparent indium tin oxide electrode, and the positively charged poly-l-lysine (PLL) was then absorbed onto BPQDs via electronic interaction. Subsequently, the aptamer as the specific recognition element for Aβ oligomer was introduced on the BPQDs-PLL modified electrode. After bound with heme to form Aβ-heme complex, Aβ oligomer was simultaneously captured by the aptamer on the electrode, resulting in an enhanced photocurrent response. Under the optimized conditions, the present PEC sensor reveals a good linear response to Aβ peptide ranging from 1.0 fM to 100 nM with a detection limit of 0.87 fM. The present signal-on cathodic PEC bioassay possesses the potential to create a new paradigm in amplified PEC assays that could provide outstanding performance for bioanalysis.

Synthesis of bio-templated clickable quantum dots and dual-emitting organic/inorganic complex for ratiometric fluorescence visual assay of blood glucose

With the prevalence of diabetes, rapid and simple blood glucose monitoring becomes more and more important. Here, we reported the synthesis of the bio-templated N3-CdZnTeS quantum dots (QDs), which was...

Tandem Förster resonance energy transfer induced visual ratiometric fluorescence sensing of tetracyclines based on zeolitic imidazolate framework-8 incorporated with carbon dots and safranine T

With increasing TC concentration, tandem FRET1 from CDs to TC, then FRET2 from TC to safranine T were occurred. TC could be easily recognized by naked eye. Besides, we could perform on-site detection of TC with the help of a mobile phone.

Functionalized MOF PCN-222-loaded quantum dots as an electrochemiluminescence sensing platform for the sensitive detection of p-nitrophenol

The composite PCN-222@CdSe was used to detect PNP.

An ultrasensitive high-performance baicalin sensor based on C3N4-SWCNTs/reduced graphene oxide/cyclodextrin metal-organic framework nanocomposite

Baicalin (Bn) obtained from natural plants has been found to exhibit significant antiviral activity against Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). Herein, a novel ultrasensitive Bn electrochemical sensor was proposed based on graphitized carbon-nitride - single-walled carbon nanotube nanocomposites (C₃N₄-SWCNTs), reduced graphene oxide (rGO) and electrodeposited cyclodextrin-metal organic framework (CD-MOF). The sensing nanomaterials were characterized by X-ray diffraction spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Under optimal conditions, the sensor exhibited sensitive detection of Bn in a wide linear range of 1 × 10^-9-5 × 10^-7 M with an LOD of 4.6 × 10^-10 M and a sensitivity of 220 A/M, and it showed satisfactory stability and accuracy for detecting Bn in real samples (human serum and bear bile scutellaria eye drops). In addition, the electrochemical reaction sites and redox mechanism of Bn were revealed through electrochemical behavior and density functional theory. This work provided an insightful solution for detecting Bn, and extensive potential applications could be further expected.

Sulfur-doped carbon dots@polydopamine-functionalized magnetic silver nanocubes for dual-modality detection of norovirus

Synergistic dual-mode optical platforms are up-and-coming detection tools in the diagnosis and management of infectious diseases. Here, novel dual-modality fluorescence (FL) and surface-enhanced Raman scattering (SERS) techniques have been integrated into a single probe for the rapid and ultrasensitive detection of norovirus (NoV). The developed FL-SER-based biosensor relies on the dual-signal enhancements of newly synthesized sulfur-doped agar-derived carbon dots (S-agCDs). The antigen-antibody immunoreaction results in forming a core-satellite immunocomplex between anti-NoV antibody-conjugated S-agCDs and polydopamine-functionalized magnetic silver nanocubes [poly (dop)-MNPs-Ag NCs]. By deploying an immunomagnetic enrichment protocol and performing the SERS modality on a single-layer graphene substrate, norovirus-like particles (NoV-LPs) were detected across a wide range of 1 fg mL^-1 - 10 ng mL^-1 with an excellent limit of detection of 0.1 fg mL^-1. The combined advantage of the dual-signaling properties of the biosensor was demonstrated using FL confocal imaging for "hotspots" tracking prior to SERS detection of clinical NoV in fecal specimen down to ⁓10 RNA copies mL^-1. The proposed dual-modality biosensor's performance increases the prospect of a rapid and low-cost sensitive NoV detection and surveillance option for public health.

A petal-shaped MOF assembled with a gold nanocage and urate oxidase used as an artificial enzyme nanohybrid for tandem catalysis and dual-channel biosensing

A facile one-pot precipitation method was employed to prepare a petal-shaped hybrid under mild conditions. The hybrid is composed of urate oxidase (UOx) encapsulated into a zeolite-like metal-organic framework (MOF) with the doping of a hollow gold nanocage (AuNC). As one of the MOF-enzyme composites, a UOx@MOF(AuNC) hybrid with the features of artificial nanoenzymes was developed as a novel dual-channel biosensing platform for fluorescence (FL) and electrochemical detection of uric acid (UA). As for FL biosensing, enzymatic catalysis of the hybrid in the presence of UA triggered tandem catalysis and oxidation reactions to cause FL quenching. UA was linearly detected in the 0.1-10 μM and 10-300 μM ranges, with the limit of detection (LOD) of 20 nM. As for electrochemical biosensing, the hybrid was dropped on a glassy carbon electrode (GCE) surface to construct a hybrid/GCE platform. Based on the redox reaction of UA on the platform surface, UA was linearly detected in the 0.05-55 μM range, with a LOD of 15 nM. Experimental results confirmed that the hybrid-based dual-channel biosensing platform enabled selective and sensitive responses to UA over potential interferents. The platform has an excellent detection capability in physiological samples. The dual-channel biosensing platform facilitates the exploration of new bioanalysis techniques for early clinical diagnosis of diseases.

Enzymatic recognition of hydrogen peroxide (H2 O2 ) in human plasma samples using HRP immobilized on the surface of poly(arginine-toluidine blue)- Fe3 O4 nanoparticles modified polydopamine; A novel biosensor

In this study, an innovative strategy was proposed for the electrocatalytical reduction and enzymatic biosensing of hydrogen peroxide (H₂ O₂ ) using chronoamperometry technique. For the first time, immobilization of horseradish peroxidase (HRP) in polydopamine-modified magnetic nanoparticles (PDA-MNPs) was successfully performed. Also, poly(l-arginine/toluidine blue) film-modified glassy carbon electrode was constructed through co-electropolymerization of l-arginine and toluidine blue on the surface of GCE using cyclic voltammetry technique. The engineered hybrid thin film provides strong functionalities for efficient grafting of PDA-MNPs which, in turn, enable the covalent immobilization of HRP. The proposed biosensor was used for the detection of H₂ O₂ in the range of 0.5-30 μM with a low limit of quantification 0.23 μM. It also was successfully applied for the investigation of hydrogen peroxide in human plasma samples.

MXene and black phosphorus based 2D nanomaterials in bioimaging and biosensing: progress and perspectives

Bioimaging and biosensing have garnered interest in early cancer diagnosis due to the ability of gaining in-depth insights into cellular functions and providing a wide range of diagnostic parameters. Emerging 2D materials of multielement MXenes and monoelement black phosphorous nanosheets (BPNSs) with unique intrinsic physicochemical properties such as a tunable bandgap and layer-dependent fluorescence, high carrier mobility and transport anisotropy, efficient fluorescence quenching capability, desirable light absorption and thermoelastic properties, and excellent biocompatibility and biosafety properties provide promising nano-platforms for bioimaging and biosensing applications. In view of the growing attention on the rising stars of the post-graphene age in the progress of bioimaging and biosensing, and their common feature characteristics as well as complementarity for constructing complexes, the main objective of this review is to reveal the recent advances in the design of MXene or BPNS based nanoplatforms in the field of bioimaging and biosensing. The preparation and surface functionalization methods, biosafety, and other important aspects of bioimaging and biosensing applications of MXenes and BPNSs have been assessed systematically, along with highlighting the main challenges in further biomedical application. The review not only focuses on the advancements in 2D materials for use in bioimaging and biosensing but also assesses the possibility of their future potential in bioapplications.

Recent advances in black phosphorus-based electrochemical sensors: A review

Since the discovery of liquid-phase-exfoliated black phosphorus (BP) as a field-effect transistor in 2014, BP, with its 2D layered structure, has attracted significant attention, owing to its anisotropic electroconductivity, tunable direct bandgap, extraordinary surface activity, moderate switching ratio, high hole mobility, good biocompatibility, and biodegradability. Several pioneering research efforts have explored the application of BP in different types of electrochemical sensors. This review summarizes the latest synthesis methods, protection strategies, and electrochemical sensing applications of BP and its derivatives. The typical synthesis methods for BP-based crystals, nanosheets, and quantum dots are discussed in detail; the degradation of BP under ambient conditions is introduced; and state-of-the-art protection methodologies for enhancing BP stability are explored. Various electrochemical sensing applications, including chemically modified electrodes, electrochemiluminescence sensors, enzyme electrodes, electrochemical aptasensors, electrochemical immunosensors, and ion-selective electrodes are discussed in detail, along with the mechanisms of BP functionalization, sensing strategies, and sensing properties. Finally, the major challenges in this field are outlined and future research avenues for BP-based electrochemical sensors are highlighted.

A ratiometric fluorescent sensor based on g-CNQDs@Zn-MOF for the sensitive detection of riboflavin via FRET

A novel ratiometric fluorescent sensor based on Förster resonance energy transfer (FRET) platform was designed for riboflavin (RF) detection. The graphitic carbon nitrides quantum dots - Zn-MOF composite (g-CNQDs@Zn-MOF) was used as the fluorescent probe. In the FRET system, g-CNQDs@Zn-MOF and RF acted as donor and acceptor, respectively. The probe exhibited high sensitivity and good selectivity to RF, and had been successfully used for the detection of RF in milk and vitamin B₂ tablets. The detection limit of the sensor was 15 nM. The strategy expanded the application of MOF in sensing filed and provided a new method for the detection of RF.

Metal–organic frameworks as photoluminescent biosensing platforms: mechanisms and applications

Recent progress of MOF-based photoluminescent platforms: a comprehensive overview of their applications in biosensing and underlying mechanisms.

A ratiometric fluorescent probe for the detection of β-galactosidase and its application

Herein, a coumarin fluorescent probe (Probe 1) was developed for the ratiometric detection of β-galactosidase (β-gal) activity. The detection range was 0–0.1 U mL⁻¹ and 0.2–0.8 U mL⁻¹, and the limit of detection (LOD) was 0.0054 U mL⁻¹. Moreover, the luminous intensity of Probe 1 increased gradually with increase in β-gal activity. It could be observed under 254 nm UV irradiation by the naked eye. Furthermore, this method only required a small amount of sample (20 μL) and a short analytical time (30 min) for the detection of β-gal activity with a low LOD. Probe 1 was successfully used to detect β-gal activity in real fruit samples, and can be applied to the quantitative and qualitative detection of β-gal activity.

A ratiometric fluorescent probe was successfully used as a tool to determine β-galactosidase activity in fruits.

Rapid Detection of Pseudomonas aeruginosa Biofilms via Enzymatic Liquefaction of Respiratory Samples

Respiratory infections caused by multi-drug-resistant Pseudomonas aeruginosa often yield poor outcomes if not detected right away. However, detecting this pathogen in respiratory samples with a rapid diagnostic test is challenging because the protective biofilms created by the pathogen are themselves surrounded by a high-viscosity sputum matrix. Here, we introduce a method for liquefying respiratory samples and disrupting bacterial biofilms on the spot within a minute. It relies on the generation of oxygen bubbles by bacterial catalase through the addition of hydrogen peroxide. When coupled with a mobile biosensor made of paper, the resulting diagnostic kit was able to detect P. aeruginosa infections in sputa from patients with excellent sensitivity and specificity within 8 min. The quick turnaround time along with few infrastructure requirements make this method ideal for the rapid screening of P. aeruginosa infections at the point of care.

Multifunctional layered black phosphorene-based nanoplatform for disease diagnosis and treatment: a review

As an outstanding two-dimensional material, black phosphorene, has attracted significant attention in the biomedicine field due to its large surface area, strong optical absorption, distinct bioactivity, excellent biocompatibility, and high biodegradability. In this review, the preparation and properties of black phosphorene are summarized first. Thereafter, black phosphorene-based multifunctional platforms employed for the diagnosis and treatment of diseases, including cancer, bone injuries, brain diseases, progressive oxidative diseases, and kidney injury, are reviewed in detail. This review provides a better understanding of the exciting properties of black phosphorene, such as its high drug-loading efficiency, photothermal conversion capability, high ¹O₂ generation efficiency, and high electrical conductivity, as well as how these properties can be exploited in biomedicine. Finally, the research perspectives of black phosphorene are discussed.

Emerging metal ion-coordinated black phosphorus nanosheets and black phosphorus quantum dots with excellent stabilities

In this work, emerging metal ion-coordinated black phosphorus nanosheets (M@BPNSs) and quantum dots (M@BPQDs) were prepared via the sonication-assisted liquid-phase exfoliation of bulk black phosphorus (BP) crystals in the presence of a metal ion (M) and solvothermal reaction of the exfoliated few-layer M@BP nanosheets. Based on theoretical calculations, a bonding mode exists between M and BP. Consequently, the adsorption energies of M on BP via the bonding mode are lower than that of M on BP via the non-bonding mode. Under the bonding mode, the adsorption energy of Zn2+ (-2.04 eV) on BP is lower than other M. Zn2+, serves as the preferred M and can be easily adsorbed on the surface of BP. We experimentally prepared emerging M@BPNSs and M@BPQDs, characterized, and compared various morphologies, microstructures and spectra under different conditions. It is verified, that the surface coordination of M with BP protects BP from oxidization and degradation of its nanostructures upon exposure to O2 and H2O. In comparison to the bare BPNSs, Zn@BPNSs showed high microstructural stability. Moreover, in comparison to bare BPQDs, Zn@BPQDs exhibited high colloidal stability and excellent stabilities with fluorescence and photothermal conversion performances. The long-term stabilities are due to the M-coordination with BP through P-M bonding on BP nanostructures. Thus, the excellent long-term stabilities in microstructure, fluorescence and photothermal conversion levels endow the emerging two-dimensional M@BPNSs and zero-dimensional M@BPQDs with great prospects towards promising applications, especially in electronics, optoelectronics, optical and biomedical fields.

Mn-Doping-induced hierarchical petal growth of a flower-like 3D MOF assembled with black phosphorous nanosheets as an electrochemical aptasensor of human stress-induced phosphoprotein 1

Herein, we report the preparation of Mn-doped Ni-based metal-organic frameworks (Mn-MOF) with 3D hierarchical flower-like superstructures through solvothermal synthesis. The Mn-MOF was assembled with 2D black phosphorous nanosheets (BPNSs) to achieve novel 2D/3D BPNSs/Mn-MOF nanocomposites, followed by the direct coupling of methylene blue (MB)-labeled DNA aptamer on the interface of the nanocomposites-modified glassy carbon electrode (GCE). The aptamer/BPNSs/Mn-MOF/GCE platform was utilized for the capture and efficient detection of stress-induced phosphoprotein 1 (STIP1). Experimental results confirmed that Mn-doping-induced the hierarchical petal growth of the flower-like 3D MOF and its assembly with BPNSs. GCE surface modifications with various components were studied by measuring electrochemical curves. The morphologies, microstructures and spectra of products were characterized. The optimal conditions used for electrochemical measurements were assessed. A smart aptasensor was explored by the aptamer/BPNSs/Mn-MOF/GCE that had multiple attractive merits, including synergistic effects of components, porous superstructures of hierarchical flower-like 3D Mn-MOF and specific aptamer-target recognition. The merits endowed this aptasensor with selective and sensitive signal responses to STIP1 over interferences. This aptasensor enabled the efficient detection of STIP1 in a broad range of 2 × 10^-3-1 × 10⁴ ng mL^-1, accompanied by a low limit of detection of 1 pg mL^-1. This aptasensor realized the successful determination of STIP1 in practical samples, exhibiting high reliability and practicability.

Visual bio-detection and versatile bio-imaging of zinc-ion-coordinated black phosphorus quantum dots with improved stability and bright fluorescence

Zero-dimensional black phosphorus quantum dots (BPQDs) have unique structural characteristics and excellent properties for promising applications over other BP structures. With the decrease of BP stacked layers, BP becomes much unstable and is easy to be oxidized and degraded in air and water. To prevent BP oxidation and degradation is crucial during the preparation process of highly stable BPQDs with strong fluorescence (FL). Herein, we explored a zinc-ion-coordinated strategy to achieve the emerging Zn@BPQDs with improved colloidal and FL stabilities. Zn ions can be adsorbed on BP surface via cation-π interactions, which passivates lone pair electrons of phosphorus and makes BP much stable upon exposure to air and water. Zn@BPQDs were prepared through sonication-assisted liquid-phase exfoliation of bulk BP crystals in the presence of Zn ions and solvothermal reaction of exfoliated few-layer Zn@BP nanosheets. Experimental results confirm the preparation of Zn@BPQDs with improved stability and high FL. Zn@BPQDs were used for both FL spectral detection and naked-eye visual FL detection of glutathione in practical samples. As emerging FL reagents, biocompatible Zn@BPQDs were further used for efficient in-vitro cell imaging and in-vivo imaging in natural plants and living aquatic animals.