Three–dimensional donor–acceptor–type photoactive material/conducting polyaniline hydrogel complex for sensitive photocathodic enzymatic bioanalysis

Three-dimensional polymer phenylethnylcopper/nitrogen doped graphene aerogel electrode coupled with Fe3O4 NPs nanozyme: Toward sensitive and robust photoelectrochemical detection of glyphosate in agricultural matrix

BACKGROUND

Presently, glyphosate (Gly) is the most extensively used herbicide globally, Nevertheless, its excessive usage has increased its accumulation in off-target locations, and aroused concerns for food and environmental safety. Commonly used detection methods, such as high-performance liquid chromatography and gas chromatography, have limitations due to expensive instruments, complex pre-processing steps, and inadequate sensitivity. Therefore, a facile, sensitive, and reliable Gly detection method should be developed.

RESULTS

A photoelectrochemical (PEC) sensor consisting of a three-dimensional polymer phenylethnylcopper/nitrogen-doped graphene aerogel (PPhECu/3DNGA) electrode coupled with Fe3O4 NPs nanozyme was constructed for sensitive detection of Gly. The microscopic 3D network of electrodes offered fast transfer routes for photo-generated electrons and a large surface area for nanozyme loading, allowing high signal output and analytical sensitivity. Furthermore, the use of peroxidase-mimicking Fe3O4 NPs instead of natural enzyme improved the stability of the sensor against ambient temperature changes. Based on the inhibitory effect of Gly on the catalytic activity Fe3O4 NPs, the protocol achieved Gly detection in the range of 5 × 10-10 to 1 × 10-4 mol L-1. Additionally, feasibility of the detection was confirmed in real agricultural matrix including tea, maize seedlings, maize seeds and soil.

SIGNIFICANCE

This work achieved facile, sensitive and reliable analysis towards Gly, and it was expected to inspire the design and utilization of 3D architectures in monitoring agricultural chemicals in food and environmental matrix.

DNA intercalation makes possible superior-gain organic photoelectrochemical transistor detection

DNA intercalation has increasingly been studied for various scenario implementations due to the diverse functions of DNA/intercalators. Nascent organic photoelectrochemical transistor (OPECT) biosensing taking place in organic electronics and photoelectrochemical bioanalysis represents a promising technological frontier in the arena. In this work, we first devise DNA intercalation-enabled OPECT for miRNA detection with a superior gain up to 17100. Intercalation of [Ru(bpy)2dppz]2+ within the miRNA-initiated hybrid chain reaction (HCR)-derived duplex DNA is realized for producing anodic photocurrent upon light stimulation, causing the corresponding target-dependent alternation in gate voltage (VG) and hence the modulated channel current (IDS) of poly (3,4-ethylenedioxythiophene) doped with poly (styrene sulfonate) (PEDOT:PSS) under specific drain voltage (VDS) for quantitative miRNA-21 analysis, which shows a wide linear relationship and a low detection limit of 5.5 × 10-15 mol L-1. This study features the DNA intercalation-enabled organic electronics with superior gain and is envisaged to attract more attention to explore DNA adducts for innovative bioelectronics and biosensing, given the diverse DNA binders with multiple functions.

Recent Progress in Biomedical Sensors Based on Conducting Polymer Hydrogels

Biosensors are increasingly taking a more active role in health science. The current needs for the constant monitoring of biomedical signals, as well as the growing spending on public health, make it necessary to search for materials with a combination of properties such as biocompatibility, electroactivity, resorption, and high selectivity to certain bioanalytes. Conducting polymer hydrogels seem to be a very promising materials, since they present many of the necessary properties to be used as biosensors. Furthermore, their properties can be shaped and enhanced by designing conductive polymer hydrogel-based composites with more specific functionalities depending on the end application. This work will review the recent state of the art of different biological hydrogels for biosensor applications, discuss the properties of the different components alone and in combination, and reveal their high potential as candidate materials in the fabrication of all-organic diagnostic, wearable, and implantable sensor devices.

Metal Porphyrin Complex Combined with Polymerization and Isomerization Cyclic Amplification for a Sensitive Photoelectrochemical Assay

5,10,15,20-Tetrakis(4-aminophenyl)-21H,23H-porphine (TPAPP) possesses good light-harvesting ability and photoelectrochemical (PEC) cathode response signal; however, the disadvantages of easy stacking and weak hydrophilicity limit its application as a signal probe in PEC biosensors. Based on these, we prepared a Fe³⁺ and Cu²⁺ co-coordinating photoactive material (TPAPP-Fe/Cu) with horseradish peroxidase (HRP)-like activity. The metal ions in the porphyrin center not only enabled the directional flow of photogenerated electrons between electron-rich porphyrin and positive metal ions within inner-/intermolecular layers but also accelerated electron transfer through a synergistic redox reaction of Fe(III)/Fe(II) and Cu(II)/Cu(I) as well as rapid generation of superoxide anion radicals (O₂^-•) by mimicking catalytically produced and dissolved oxygen, thereby providing the desired cathode photoactive material with extremely high photoelectric conversion efficiency. Accordingly, by combining with toehold-mediated strand displacement (TSD)-induced single cycle and polymerization and isomerization cyclic amplification (PICA), an ultrasensitive PEC biosensor was constructed for the detection of colon cancer-related miRNA-182-5p. The ultratrace target could be converted to abundant output DNA by TSD possessing the desirable amplifying ability to trigger PICA for forming long ssDNA with repetitive sequences, thus decorating substantial TPAPP-Fe/Cu-labeled DNA signal probes for producing high PEC photocurrent. Meanwhile, the Mn(III) meso-tetraphenylporphine chloride (MnPP) was embedded in dsDNA to further exhibit a sensitization effect toward TPAPP-Fe/Cu and an acceleration effect analogous to that of metal ions in the porphyrin center above. As a result, the proposed biosensor displayed a detection limit as low as 0.2 fM, facilitating the development of high-performance biosensors and showing great potential in early clinical diagnosis.

Self-Supplied Electron Photoelectrochemical Biosensor with PTB7-Th as a Photoelectric Material and Biotin as an Efficient Quencher

In this work, a self-supplied electron photoelectrochemical (PEC) biosensor for sensitive determination of Pb²⁺ was established by utilizing donor-acceptor (D-A)-type PTB7-Th (poly{4,8-bis[5-(2-ethylhexyl) thiophen-2-yl]benzo[1,2-b,4,5-b']dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]-thiophene-4,6-diyl}) as a photoelectric material coupled with biotin as an efficient signal quencher. Impressively, compared with the traditional PEC signal quenchers, biotin was first applied as a PEC signal quencher in this work and it effectively avoided a cumbersome preparation process, complex DNA sequence design, and extra reagent assistance and greatly simplified experimental steps, which could achieve an efficient PEC signal quenching toward PTB7-Th. In addition, the execution of a DNAzyme-assisted Pb²⁺ recycling amplification reaction could release the quencher biotin, leading to the recovery of the PEC signal, thereby realizing the quantitative detection of Pb²⁺. Resultantly, the submitted self-supplied electron PEC biosensor presented an extensive coverage of assay Pb²⁺ (50 fM to 500 nM) along with a low determination limit (16.7 fM), which exhibited the advantages of high selectivity and excellent stability. Importantly, this work provided a powerful alternative to traditional heavy metal-ion assessment methods and possessed the potential for application in environment, biomedicine, and food-safety fields.

A label-free visual aptasensor for zearalenone detection based on target-responsive aptamer-cross-linked hydrogel and color change of gold nanoparticles

ZEN-responsive hydrogel was prepared using ZEN aptamer and a cationic conjugated skeleton which was formed by the electrostatic interaction between acrylamide and poly (diallyldimethylammonium chloride) (PDDA). In the presence of ZEN, the binding of aptamer and ZEN caused the hydrogel to dissociate, releasing the gold nanoparticles (AuNPs) encapsulated in the hydrogel into supernatant, whose color changes serving as response instructions were observed by eyes. To realize low dose visual detection, the TMB-H₂O₂ was used for quantitative readout by AuNPs released from the hydrogel which can efficiently catalyze the reaction to generate a obvious change.There was a good linear relationship between the changed absorbance and concentration of ZEN within 2.5-100 ng/mL, a detection limit of 0.98 ng/mL, recovery rates of 98.8%-101.3% and 99.8%-101.5% for corns and beer, respectively. This developed sensing strategy would provide a promising application for other mycotoxins by replacing the corresponding aptamer sequences.

Artificial photosynthesis systems for solar energy conversion and storage: platforms and their realities

In natural photosynthesis, photosynthetic organisms such as green plants realize efficient solar energy conversion and storage by integrating photosynthetic components on the thylakoid membrane of chloroplasts. Inspired by natural photosynthesis, researchers have developed many artificial photosynthesis systems (APS's) that integrate various photocatalysts and biocatalysts to convert and store solar energy in the fields of resource, environment, food, and energy. To improve the system efficiency and reduce the operation cost, reaction platforms are introduced in APS's since they allow for great stability and continuous processing. A systematic understanding of how a reaction platform affects the performance of artificial photosynthesis is conducive for designing an APS with superb solar energy utilization. In this review, we discuss the recent APS's researches, especially those confined on/in platforms. The importance of different platforms and their influences on APS's performance are emphasized. Generally, confined platforms can enhance the stability and repeatability of both photocatalysts and biocatalysts in APS's as well as improve the photosynthetic performance due to the proximity effect. For functional platforms that can participate in the artificial photosynthesis reactions as active parts, a high integration of APS's components on/in these platforms can lead to efficient electron transfer, enhanced light-harvesting, or synergistic catalysis, resulting in superior photosynthesis performance. Therefore, the integration of APS's components is beneficial for the transfer of substrates and photoexcited electrons in artificial photosynthesis. We finally summarize the current challenges of APS's development and further efforts on the improvement of APS's.

A short review on the synthesis and advance applications of polyaniline hydrogels

Conductive polymeric hydrogels (CPHs) exhibit remarkable properties such as high toughness, self-recoverability, electrical conductivity, transparency, freezing resistance, stimulus responsiveness, stretch ability, self-healing, and strain sensitivity. Due to their exceptional physicochemical and physio-mechanical properties, among the widely studied CPHs, polyaniline (PANI) has been the subject of immense interest due to its stability, tunable electrical conductivity, low cost, and good biocompatibility. The current state of research on PANI hydrogel is discussed in this short review, along with the properties, preparation methods, and common characterization techniques as well as their applications in a variety of fields such as sensor and actuator manufacturing, biomedicine, and soft electronics. Furthermore, the future development and applications of PANI hydrogels are also mentioned.

Conductive polymeric hydrogels (CPHs) exhibit remarkable properties for advance technological applications.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Donor-Acceptor Compensated ZnO Semiconductor for Photoelectrochemical Biosensors

Hindering the recombination of a photogenerated carrier is a crucial method to enhance the photoelectrochemical performance of ZnO due to its high exciton binding energy. Herein, the intramolecular donor-acceptor compensated semiconductor ZnO (I-D/A ZnO), introducing C dopants and oxygen vacancies, was prepared with the assistance of ascorbic acid (AA). According to the DFT calculations, the asymmetry DOS could lead to the longer carrier lifetime and the smaller electron transfer resistance. Then, the photoelectrochemical biosensor toward glucose was regarded as a model to discuss the application of ZnO in biosensors. As a result, the biosensor based on I-D/A ZnO showed good performance with high sensitivity, low limit of detection, and fine anti-interference, meaning that I-D/A ZnO is a promising semiconductor for photoelectrochemical biosensors.

Cellulose nanocrystal mediated fast self-healing and shape memory conductive hydrogel for wearable strain sensors

Electro-conductive hydrogel (ECH) with self-healing, shape memory and biocompatible properties is highly urgent for wearable strain sensors to prolonging their lifespan, endowing programmable shape control property, and improving affinity to skin during service. However, most of synthetic polymer-based ECH usually involve potential toxicity, long healing and shape drive time. Herein, a fast healable and shape memory ECH with excellent biocompatibility is reported for the first time by incorporating cellulose nanocrystals grafted phenylboronic acid (CNCs-ABA) and multiwalled carbon nanotubes (MWCNTs) into polyvinyl alcohol (PVA). CNCs-ABA is designed as dispersant and crosslinker in hydrogel. pH-induced dynamic borate bonds give hydrogel excellent shape recovery and fixity ratio of 82.1% and 78.2%, respectively. Meanwhile, 97.1% healing efficiency is obtained within 2 min depending on remarkable photothermal effect of MWCNTs and reversible microcrystallization. Double crosslinking networks endow excellent mechanical properties to hydrogel, whose tensile strength, strain and elastic modulus reach 227.0 kPa, 395.0% and 9.0 kPa, respectively. Furthermore, the synergistic effect of MWCNTs and NaOH enhance the conductivity of hydrogel with value of 3.8×10^-2 S/m. In addition, the hydrogel can act as strain sensor for detecting human motion with superior biocompatibility and fast resistance response to applied strain, which is suitable for human health management.