"Turn-on" ratiometric electrochemical detection of H2O2 in one drop of whole blood sample via a novel microelectrode sensor

Self-Immolative Electrochemical Redox Substrates: Emerging Artificial Receptors in Sensing and Biosensing

The development of artificial receptors has great significance in measurement science and technology. The need for a robust version of natural receptors is getting increased attention because the cost of natural receptors is still high along with storage difficulties. Aptamers, imprinted polymers, and nanozymes are some of the matured artificial receptors in analytical chemistry. Recently, a new direction has been discovered by organic chemists, who can synthesize robust, activity-based, self-immolative organic molecules that have artificial receptor properties for the targeted analytes. Specifically designed trigger moieties implant selectivity and sensitivity. These latent electrochemical redox substrates are highly stable, mass-producible, inexpensive, and eco-friendly. Combining redox substrates with the merits of electrochemical techniques is a good opportunity to establish a new direction in artificial receptors. This Review provides an overview of electrochemical redox substrate design, anatomy, benefits, and biosensing potential. A proper understanding of molecular design can lead to the development of a library of novel self-immolative redox molecules that would have huge implications for measurement science and technology.

Precise Differentiation of Wobble-Type Allele via Ratiometric Design of a Ligase Chain Reaction-Based Electrochemical Biosensor for CYP2C19*2 Genotyping of Clinical Samples

Due to the comparable stability between the perfect-base pair and the wobble-base pair, a precise differentiation of the wobble-type allele has remained a challenge, often leading to false results. Herein, we proposed a ligase chain reaction (LCR)-based ratiometric electrochemical DNA sensor, namely, R-eLCR, for a precise typing of the wobble-type allele, in which the traditionally recognized "negative" signal of wobble-base pair-mediated amplification was fully utilized as a "positive" one and a ratiometric readout mode was employed to ameliorated the underlying potential external influence and improved its detection accuracy in the typing of the wobble-type allele. The results showed that the ratio between current of methylene blue (IMB) and current of ferrocene (IFc) was partitioned in three regions and three types of wobble-type allele were thus precisely differentiated (AA homozygote: IMB/IFc > 2; GG homozygote: IMB/IFc < 1; GA heterozygote: 1 < IMB/IFc < 2); the proposed R-eLCR successfully discriminated the three types of CYP2C19*2 allele in nine cases of human whole blood samples, which was consistent with those of the sequencing method. These results evidence that the proposed R-eLCR can serve as an accurate and robust alternative for the identification of wobble-type allele, which lays a solid foundation and holds great potential for precision medicine.

An electrochemical microsensor based on a specific recognition element for the simultaneous detection of hydrogen peroxide and ascorbic acid in the live rat brain

A novel electrochemical microsensor was developed for the ratiometric and simultaneous determination of hydrogen peroxide (H2O2) and ascorbic acid (AA) based on the borate-phenol "switch" recognition mechanism and carbon nanotube (CNT) catalytic characteristics. First of all, a carbon fiber microelectrode (CFME) was coated with CNTs. Then, a specific probe, 9-anthraceneboronic acid pinacol ester (9-AP), was screened and decorated on CNTs through π-π stacking for the recognition of H2O2 based on the transformation of boric acid ester into electroactive phenols. CNTs not only served as the amplifiers of current signals, but also as catalysts facilitating AA oxidation. Meanwhile, ferrocenecarboxylic acid (Fc), inert to H2O2 and AA, was modified on another amino-functionalized CNT microelectrode via an amide bond as an internal reference channel for avoiding errors caused by environmental discrepancies. The two-channel ratiometric microsensor enabled the sensitive and accurate detection of H2O2 and AA simultaneously, and the detection limits were estimated to be 0.09 μM and 4.12 μM, respectively. The developed microsensor with remarkable analytical performance was finally applied for the simultaneous detection of H2O2 and AA in the live rat brain.

Electrochemical Biosensors for Whole Blood Analysis: Recent Progress, Challenges, and Future Perspectives

Whole blood, as one of the most significant biological fluids, provides critical information for health management and disease monitoring. Over the past 10 years, advances in nanotechnology, microfluidics, and biomarker research have spurred the development of powerful miniaturized diagnostic systems for whole blood testing toward the goal of disease monitoring and treatment. Among the techniques employed for whole-blood diagnostics, electrochemical biosensors, as known to be rapid, sensitive, capable of miniaturization, reagentless and washing free, become a class of emerging technology to achieve the target detection specifically and directly in complex media, e.g., whole blood or even in the living body. Here we are aiming to provide a comprehensive review to summarize advances over the past decade in the development of electrochemical sensors for whole blood analysis. Further, we address the remaining challenges and opportunities to integrate electrochemical sensing platforms.

Iodide-Mediated Etching of Gold Nanostar for the Multicolor Visual Detection of Hydrogen Peroxide

A multicolor visual method for the detection of hydrogen peroxide (H₂O₂) was reported based on the iodide-mediated surface etching of gold nanostar (AuNS). First, AuNS was prepared by a seed-mediated method in a HEPES buffer. AuNS shows two different LSPR absorbance bands at 736 nm and 550 nm, respectively. Multicolor was generated by iodide-mediated surface etching of AuNS in the presence of H₂O₂. Under the optimized conditions, the absorption peak Δλ had a good linear relationship with the concentration of H₂O₂ with a linear range from 0.67~66.67 μmol L^-1, and the detection limit is 0.44 μmol L^-1. It can be used to detect residual H₂O₂ in tap water samples. This method offered a promising visual method for point-of-care testing of H₂O₂-related biomarkers.

Dual-Mode Ratiometric Electrochemical and Turn-On Fluorescent Detection of Butyrylcholinesterase Utilizing a Single Probe for the Diagnosis of Alzheimer's Disease

Biomarkers detection in blood with high accuracy is crucial for the diagnosis and treatment of many diseases. In this study, the proof-of-concept fabrication of a dual-mode sensor based on a single probe (Re-BChE) using a dual-signaling electrochemical ratiometric strategy and a "turn-on" fluorescent method is presented. The probe Re-BChE was synthesized in a single step and demonstrated dual mode response toward butyrylcholinesterase (BChE), a promising biomarker of Alzheimer's disease (AD). Due to the specific hydrolysis reaction, the probe Re-BChE demonstrated a turn-on current response for BChE at -0.28 V, followed by a turn-off current response at -0.18 V, while the fluorescence spectrum demonstrated a turn-on response with an emission wavelength of 600 nm. The developed ratiometric electrochemical sensor and fluorescence detection demonstrated high sensitivity with BChE concentrations with a low detection limit of 0.08 μg mL^-1 and 0.05 μg mL^-1, respectively. Importantly, the dual-mode sensor presents the following advantages: (1) dual-mode readout can correct the impact of systematic or background error, thereby achieving more accurate results; (2) the responses of dual-mode readout originate from two distinct mechanisms and relatively independent signal transduction, in which there is no interference between two signaling routes. Additionally, compared with the reported single-signal electrochemical assays for BChE, both redox potential signals were detected in the absence of biological interference within a negative potential window. Furthermore, it was discovered that the outcomes of direct dual-mode electrochemical and fluorescence quantifications of the level of BChE in serum were in agreement with those obtained from the use of commercially available assay kits for BChE sensing. This method has the potential to serve as a useful point-of-care tool for the early detection of AD.

Affinity-based electrochemical sensors for biomolecular detection in whole blood

The detection and/or quantification of biomarkers in blood is important for the early detection, diagnosis, and treatment of a variety of diseases and medical conditions. Among the different types of sensors for detecting molecular biomarkers, such as proteins, nucleic acids, and small-molecule drugs, affinity-based electrochemical sensors offer the advantages of high analytical sensitivity and specificity, fast detection times, simple operation, and portability. However, biomolecular detection in whole blood is challenging due to its highly complex matrix, necessitating sample purification (i.e., centrifugation), which involves the use of bulky, expensive equipment and tedious sample-handling procedures. To address these challenges, various strategies have been employed, such as purifying the blood sample directly on the sensor, employing micro-/nanoparticles to enhance the detection signal, and coating the electrode surface with blocking agents to reduce nonspecific binding, to improve the analytical performance of affinity-based electrochemical sensors without requiring sample pre-processing steps or laboratory equipment. In this article, we present an overview of affinity-based electrochemical sensor technologies that employ these strategies for biomolecular detection in whole blood.

Gold Nanoclusters Dispersed on Gold Dendrite-Based Carbon Fibre Microelectrodes for the Sensitive Detection of Nitric Oxide in Human Serum

Herein, gold nanoclusters (Au NC) dispersed on gold dendrite (Au DS)-based flexible carbon fibre (AuNC@AuDS|CF) microelectrodes are developed using a one-step electrochemical approach. The as-fabricated AuNC@AuDS|CF microelectrodes work as the prospective electrode materials for the sensitive detection of nitric oxide (NO) in a 0.1 M phosphate buffer (PB) solution. Carbon microfibre acts as an efficient matrix for the direct growth of AuNC@AuDS without any binder/extra reductant. The AuNC@AuDS|CF microelectrodes exhibit outstanding electrocatalytic activity towards NO oxidation, which is ascribed to their large electrochemical active surface area (ECSA), high electrical conductivity, and high dispersion of Au nanoclusters. As a result, the AuNC@AuDS|CF microelectrodes attain a rapid response time (3 s), a low limit of detection (LOD) (0.11 nM), high sensitivity (66.32 µA µM cm^-2), a wide linear range (2 nM-7.7 µM), long-term stability, good reproducibility, and a strong anti-interference capability. Moreover, the present microsensor successfully tested for the discriminating detection of NO in real human serum samples, revealing its potential practicability.

Graphene frameworks-confined synthesis of 2D-layered NiCoP for the electrochemical sensing of H2O2 at lower overpotential

A new 2D-layered nickel cobalt phosphide nanosheet confined by 3D graphene frameworks (denoted as NiCoP/GFs) is in situ controllably synthesized as a highly efficient and durable electrocatalyst, which is obtained from the transformation of corresponding NiCo layer double hydroxides and GFs. Hydrogen peroxide (H₂O₂) is selected as a demonstration to study the electrochemical sensing performance of the NiCoP/GFs. Benefiting from 2D morphology of NiCoP and network structure of GFs, NiCoP/GFs exhibits remarkable electroactivity toward H₂O₂ at a relatively low overpotential of approximately - 0.3 V (vs sat. Ag/AgCl) in 0.01 M phosphate-buffered saline solution (PBS, pH = 7.4). The NiCoP/GFs-based H₂O₂ electrochemical sensor achieves a high sensitivity of ∼4398 μA mM^-1 cm^-2, a low detection limit of 0.028 ± 0.006 μM, and desirable selectivity. In addition, the sensor can sensitively detect H₂O₂ from living cancer cells. This study not merely broadens the synthesis methods of transition metal phosphide-based nanocrystals but the NiCoP/GFs also has broad prospects in diverse electrochemistry fields. We have reported a controllable synthesis of 2D nickel cobalt phosphide nanosheet confined by graphene frameworks (denoted as NiCoP/GFs) as a greatly efficient and durable electrocatalyst. The NiCoP/GFs exhibits remarkable electroactivity toward detection of H₂O₂ at a relatively low overpotential of approximately -0.3 V. Density functional theory (DFT) calculations further prove that regulation of the electronic structure of NiCoP by GFs lowers the adsorption free energy of *OOH intermediates, and thus contributes to the greatly improved the electrocatalytic performance of NiCoP/GFs toward H₂O₂ reduction. The developed NiCoP/GFs can be applied as excellent electrode materials for efficient electrochemical sensing of H₂O₂.

Specifically triggered dissociation based ratiometric electrochemical sensor for H2O2 measurement in food samples

A novel ratiometric strategy based electrochemical sensor was developed to quantitative assay of H₂O₂ in different food samples. 4-aminophenylboronic acid pinacol ester (ABAPE) dissociation was specifically triggered by H₂O₂ to generate electro-active 4-aminophenol (4-AP), which not only can be oxidized to indirectly indicate the concentration of H₂O₂, but also endowed the sensor with high selectivity. Meanwhile, a reference probe of poly(thionine) (TH) was modified with ketjen black (KB) and gold nanoparticles (AuNPs) on electrode surface. KB and AuNPs displayed high electrocatalytic activity to 4-AP. A current ratio between 4-AP and TH (i/i_TH) showed a good linear relationship with the concentration of H₂O₂ in a range of 3.0 × 10^-7 - 1.0 × 10^-4 mol/L (0.010 ppm - 3.40 ppm) with a limit of detection of 2.6 × 10^-7 mol/L (0.009 ppm) (S/N = 3). Moreover, the ratiometric strategy based sensor possessed good accuracy, reliability, and stability, and successfully determined H₂O₂ in food samples with satisfactory results.

Wearable Electrochemical Sensors in Parkinson's Disease

Parkinson’s disease (PD) is a neurodegenerative disorder associated with widespread aggregation of α-synuclein and dopaminergic neuronal loss in the substantia nigra pars compacta. As a result, striatal dopaminergic denervation leads to functional changes in the cortico-basal-ganglia-thalamo-cortical loop, which in turn cause most of the parkinsonian signs and symptoms. Despite tremendous advances in the field in the last two decades, the overall management (i.e., diagnosis and follow-up) of patients with PD remains largely based on clinical procedures. Accordingly, a relevant advance in the field would require the development of innovative biomarkers for PD. Recently, the development of miniaturized electrochemical sensors has opened new opportunities in the clinical management of PD thanks to wearable devices able to detect specific biological molecules from various body fluids. We here first summarize the main wearable electrochemical technologies currently available and their possible use as medical devices. Then, we critically discuss the possible strengths and weaknesses of wearable electrochemical devices in the management of chronic diseases including PD. Finally, we speculate about possible future applications of wearable electrochemical sensors in PD, such as the attractive opportunity for personalized closed-loop therapeutic approaches.

Technological advances in electrochemical biosensors for the detection of disease biomarkers

With an increasing focus on health in contemporary society, interest in the diagnosis, treatment, and prevention of diseases has grown rapidly. Accordingly, the demand for biosensors for the early diagnosis of disease is increasing. However, the measurement range of existing electrochemical sensors is relatively high, which is not suitable for early disease diagnosis, requiring the detection of small amounts of biocomponents. Various attempts have been made to overcome this and amplify the signal, including binding with various labeling molecules, such as DNA, enzymes, nanoparticles, and carbon materials. Efforts are also being made to increase the sensitivity of electrochemical sensors, and the combination of nanomaterials, materials, and biotechnology offers the potential to increase sensitivity in a variety of ways. Recent studies suggest that electrochemical sensors can be a powerful tool in providing comprehensive insights into the targeting and detection of disease-associated biomarkers. Significant advances in nanomaterial and biomolecule approaches for improved sensitivity have resulted in the development of electrochemical biosensors capable of detecting multiple biomarkers in real time in clinically relevant samples. In this review, we have discussed the recent studies on electrochemical sensors for detection of diseases such as diabetes, degenerative diseases, and cancer. Further, we have highlighted new technologies to improve sensitivity using various materials, including DNA, enzymes, nanoparticles, and carbon materials.

Crumpled Graphene/Poly (azure I) Modified Electrode for Non-enzymatic Detection of Hydrogen Peroxide Secreted from Tumor Cells

Hydrogen peroxide (H₂O₂), an important representatives of reactive oxygen species, its aberrant expression is related to many diseases, including cancers. Therefore, it is very significant to design a reliable method for the real-time detection of endogenous H₂O₂. Herein, we describe preparing a poly (azure I)/crumpled graphene (cGN) modified electrode by an electro-polymerization method. The results showed that this electrode presented obvious electrocatalytic effect on the reduction of H₂O₂. Amperometric method was employed to monitor H₂O₂, and the amperometric response exhibited a good linear relationship with its concentration in the range of 8.0 × 10^-6 - 1.25 × 10^-3 mol/L; the detection limit reached to 6.7 × 10^-7 mol/L (S/N = 3). Furthermore, this modified also displayed good selectivity, long-term stability and a high anti-interference ability. Excitingly, the established method could be successfully used to detect H₂O₂ in human serum samples, and measured H₂O₂ secreted from living MCF-7 cells. It could have potential use in cancer diagnosis.

In Situ Monitoring of Hydrogen Peroxide Released from Living Cells Using a ZIF-8-Based Surface-Enhanced Raman Scattering Sensor

Hydrogen peroxide (H₂O₂) widely involves in intracellular and intercellular redox signaling pathways, playing a vital role in regulating various physiological events. Nevertheless, current analytical methods for the H₂O₂ assay are often hindered by relatively long response time, low sensitivity, or self-interference. Herein, a zeolitic imidazolate framework-8 (ZIF-8)-based surface-enhanced Raman scattering (SERS) sensor has been developed to detect H₂O₂ released from living cells by depositing ZIF-8 over SERS active gold nanoparticles (AuNPs) grafted with H₂O₂-responsive probe molecules, 2-mercaptohydroquinone. Combining the superior fingerprint identification of SERS and the highly efficient enrichment and selective response of H₂O₂ by ZIF, the ZIF-8-based SERS sensor exhibits a high anti-interference ability for H₂O₂ detection, with a limit of detection as low as 0.357 nM. Satisfyingly, owing to the enhanced catalytic activity derived from the successful integration of AuNPs and ZIF, the response time as short as 1 min can be obtained, demonstrating the effectiveness of the SERS sensor for rapid H₂O₂ detection. Furthermore, the developed SERS sensor enables real-time detection of H₂O₂ secreted from living cells under phorbol myristate acetate stimulation, as cells can be cultured on-chip. This study will pave the way toward the development of a metal-organic framework-based SERS platform for application in the fields of biosensing and early disease diagnosis associated with H₂O₂ secretion, thus exhibiting promising potential for future therapies.

Facile Electrochemical Microbiosensor Based on In Situ Self-Assembly of Ag Nanoparticles Coated on Ti3C2Tx for In Vivo Measurements of Chloride Ions in the PD Mouse Brain

Chloride ion (Cl^-), one of the most important anions in the brain, has been confirmed to participate in the pathological process of Parkinson's disease (PD). As such, the development of a reliable method for in vivo measurements of Cl^- is extremely appealing, especially for understanding the pathogenesis of PD. We herein designed a facile electrochemical microbiosensor (ECMB), based on in situ self-assembly of Ag nanoparticles (Ag NPs) coated on Ti₃C₂T_x. The uniform nanosized Ag NPs were reduced by Ti₃C₂T_x by a simple dipping process, endowing the ECMB with excellent specificity toward Cl^- detection and remarkably reproducible preparation process. Meanwhile, electro-oxidized graphene oxide was introduced as an inner reference, thus avoiding the environmental interference of the complicated brain systems to increase the determination accuracy. An extensive in vitro study revealed that the proposed ECMB would be a robust candidate for real-time monitoring of Cl^- in the PD mouse brain with high selectivity, accuracy, and reproducibility. Moreover, the availability and reliability toward in vivo Cl^- monitoring of the designed ECMB were well confirmed by comparing with the standard Volhard's method. Finally, by virtue of the successful employment of the developed detecting platform in the in vivo measurement of Cl^- in the PD mouse brain, systematic analysis and comparison of the average levels of Cl^- in the three regions including cortex, striatum, and hippocampus of brains from normal and PD model mice have been achieved.