Oxygen vacancies enhanced photoelectrochemical aptasensing of 2, 3', 5, 5'-tetrachlorobiphenyl amplified with Ag3VO4 nanoparticle-TiO2 nanotube array heterostructure

Effective photocatalytic inactivation of Microcystis aeruginosa by Ag3VO4/BiVO4 heterojunction under visible light

In recent years, photocatalytic technology has been increasingly used for the treatment of algal blooms in water bodies due to its high efficiency and environmental advantages. However, conventional semiconductor materials suffer from high electron-hole recombination rate, low carrier mobility and weak surface adsorption ability, which made their photocatalytic performance limited. Therefore, the photocatalytic performance of the composites can be improved by coupling another semiconductor material to form a heterojunction to accelerate electron transfer. In this study, a novel composite Ag3VO4/BiVO4 (ABV) photocatalyst was successfully prepared by in-situ deposition method for the photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. The photocatalyst showed excellent photocatalytic activity, and the degradation rate of M. aeruginosa chlorophyll a was up to 99.8% within 4 h under visible light. During the photocatalytic degradation, the morphology of algae cells, the permeability of cell membrane, the organic matter inside and outside the cells, the antioxidant system and the soluble protein were seriously damaged. Moreover, three cycle experiments showed that the prepared ABV photocatalyst had high reusability. Finally, a possible mechanism of M. aeruginosa inactivation was proposed. In general, the synthesized ABV photocatalyst can effectively inactivate cyanobacteria under visible light and provided a new method for M. aeruginosa removal in water.

Photoelectrochemical immunoassay of squamous cell carcinoma antigen based on CuO/nitrogen-doped porous carbon-ZnO biolabeling and a type-II In2O3/AgBiS2 heterojunction

AgBiS₂ was hydrothermally synthesized, In₂O₃ was synthesized by hydrothermal method and calcination, and the type-II In₂O₃/AgBiS₂ heterojunction material of an optimized composition ratio was cast-coated on a fluorine-doped tin oxide (FTO) slice to fabricate an In₂O₃/AgBiS₂/FTO photoanode. The signal-attenuated photoelectrochemistry sandwich immunoassay of squamous cell carcinoma antigen (SCCA) was realized on this photoanode, on the basis of a bovine serum albumin/secondary antibody/CuO nanoparticles/nitrogen-doped porous carbon-ZnO bionanocomposite that can competitively absorb light and deplete the electron donor ascorbic acid as well as show the steric hindrance and p-n quenching effects. Under the optimized conditions (e.g., at a bias of 0 V vs. SCE), the photocurrent was linear with the common logarithm of SCCA concentration from 2.00 pg mL^-1 to 50.0 ng mL^-1, with a limit of detection (LOD) of 0.62 pg mL^-1 (S/N = 3). The immunoassay of SCCA in human serum samples gave satisfactory recovery (92.0~103%) and relative standard deviation (5.1~7.8%) results.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

Design an efficient photoelectrochemical aptasensor for PCB72 based on CdTe@CdS core@shell quantum dots-decorated TiO2 nanotubes

In this work, an efficient and novel photoelectrochemical (PEC) aptasensor for 2,3',5,5'-tetrachlorobiphenyl (PCB72) was constructed based on CdTe@CdS core@shell quantum dots (CdTe@CdS QDs)-decorated TiO₂ nanotubes (TiO₂ NTs). CdTe@CdS QDs were prepared by the combination of CdTe and CdS with a proper lattice mismatch. Due to their large band offsets, core@shell QDs can reduce undesirable carrier recombination, significantly improving their charge separation efficiency. Then the synthesized CdTe@CdS QDs were modified on TiO₂ NTs (CdTe@CdS QDs/TiO₂ NTs) through electrostatic adsorption method. The as-prepared composites exhibit a wide visible light absorption range, good PEC activity and high photoelectric conversion efficiency. Also, the PEC aptasensor prepared via the immobilization of anti-PCB72 aptamer on the composites exhibits outstanding analytical performance with high sensitivity and specificity for PCB72 under visible-light irradiation, achieving a detection limit as low as 0.03 ng/L. It was also applied to detect PCB72 in four different real environmental samples with satisfactory results.

Insight into the enhanced photocatalytic activity mechanism of the Ag3VO4/CoWO4 p–n heterostructure under visible light

A novel Ag3VO4/CoWO4 p–n heterostructure was designed and prepared by an in situ growth method. The physicochemical properties were characterized by multiple techniques, and the photocatalytic performances in Cr(vi) reduction and TC degradation were also evaluated under visible-light irradiation.

Amplified detection signal at a photoelectrochemical aptasensor with a poly(diphenylbutadiene)-BiOBr heterojunction and Au-modified CeO2 octahedrons

A major aspect of this work is the synergistic application of a poly(diphenylbutadiene)-BiOBr composite and a gold nanoparticle-linked CeO₂ octahedron to develop a photoelectrochemical aptasensor with an easily measurable detection signal change. Specifically, poly(diphenylbutadiene) nanofiber-immobilised BiOBr flower-like microspheres were developed as a hybrid material with a heterojunction that facilitates high visible light absorption and efficient photo-generated charge separation, which are essential features for sensitive photoelectrochemical sensors. The model analyte acetamiprid was attached via its specific aptamer on the aptasensor. Separately, a gold nanoparticle-linked CeO₂ octahedron was strategically used to significantly diminish the photocurrent by impeding electron transfer at the aptasensor surface. After acetamiprid binding, the CeO₂ octahedrons were displaced from the aptasensor. This caused a weakened quenching effect and restored the photocurrent to accomplish an "on-off-on" detection mechanism. This photoelectrochemical aptasensor exhibited a detection limit of 0.05 pM over a linear range of 0.1 pM-10 μM acetamiprid. The use of an aptamer has provided good specificity to acetamiprid and anti-interference. In addition, an ∼5.8% relative standard deviation was estimated as the reproducibility of the photoelectrochemical aptasensor. Furthermore, nearly 90% of the initial photocurrent was still measurable after storing these aptasensors at room temperature for 4 weeks, demonstrating their stability.

Rationally engineered high-performance BiVO4/Ag3VO4/SnS2 photoelectrodes for ultrasensitive immunosensing of CYFRA21-1 based on HRP-tyramine-triggered insoluble precipitates

A photoelectrochemical (PEC) biosensor capable of detecting cytokeratin 19 fragment 21-1 (CYFRA21-1) was optimized by taking advantage of the powerful conjugate repeats of horseradish peroxidase and tyramine (HRP-tyramine)-triggered enzymatic biocatalytic precipitation (BCP) on high-performance BiVO₄/Ag₃VO₄/SnS₂ photoelectrodes. Compared with the ubiquitous BCP strategy, we identified a design supporting conjugate repeats generated by HRP and tyramine-triggered immeasurable insoluble precipitates in the presence of hydrogen peroxide and 4-chloro-1-phenol (4-CN), and the steric hindrance improved sensitivity. Moreover, by virtue of BiVO₄, Ag₃VO₄, SnS₂ excellent level matching structure and chemical stability, a heterojunction (BiVO₄/Ag₃VO₄/SnS₂) with high light absorption efficiency has been successfully prepared. The novel heterostructure system of BiVO₄/Ag₃VO₄/SnS₂ with high detection current and low background signal exhibited high-performance PEC determination. Generally, the hitherto untapped biosensor resource realized the sensitive detection of CYFRA21-1 with a wide linear range from 50 fg/mL to 200 ng/mL, and a detection limit of 15 fg/mL, which illustrated the potential for biotechnological applications.

TiO2 nanotube arrays decorated with BiOBr nanosheets by the SILAR method for photoelectrochemical sensing of H2O2

The design and construction of a photoelectrochemical (PEC) sensor with excellent photoelectric properties and good photoelectrocatalysis activity is significant for the effective detection of analytes. In this paper, based on a two-step anodic oxidation method and successive ionic layer adsorption (SILAR) method, a TiO2 nanotube array (TNT) photoelectrochemical sensor modified with BiOBr nanosheets was constructed and applied for the detection of H2O2 for the first time. The photocurrent of the photoelectrochemical sensor increases with the increase of the H2O2 concentration under the irradiation of an 8 W UV lamp. Excellent linearity was obtained in the concentration range from 10 nM to 100 μM with a low detection limit of 5 nM (S/N = 3). This excellent photoelectrochemical performance is due to the formation of a p-n heterojunction between BiOBr and TiO2 nanotube arrays, which provides efficient separation of charge carriers and accelerates electron transport. Moreover, it is applied to detect H2O2 in milk samples and it showed a good recovery result ranging from 95.73% to 105.65%, which provides a promising new strategy for the detection of H2O2.

Photoelectrochemical detection of human epidermal growth factor receptor 2 (HER2) based on Co3O4-ascorbic acid oxidase as multiple signal amplifier

A sensitive photoelectrochemical (PEC) sensor based on hexagonal carbon nitride tubes (HCNT) as photoactive material was prepared for the detection of human epidermal growth factor receptor 2 (HER2). Magnetic Fe₃O₄ nanospheres (MNs) modified with anti-HER2 antibodies were employed for highly efficient capture of HER2 from serum sample, and Co₃O₄ nanoparticles (Co₃O₄ NPs) modified with ascorbic acid oxidase (AAO) as well as HER2 aptamer were used for signal amplification. When the aptamer-Co₃O₄-AAO probe was captured onto the electrode surface through the specific binding of the aptamer with HER2, the photocurrent intensity decreased. This was because Co₃O₄ NPs competed with HCNT for consumption of the excitation energy. As a consequence AAO catalyzed the oxidation of the electron donor (AA), and the aptamer-Co₃O₄-AAO probe increased the steric hindrance at the electrode surface, leading to significant photocurrent intensity decrease, thus realizing multiple signal amplification. Based on this signal amplification strategy, at 0 V (vs Ag/AgCl), the PEC sensor shows a wide linear response ranging from 1 pg mL^-1 to 1 ng mL^-1 with a low detection limit of 0.026 pg mL^-1 for HER2. Importantly, the prepared PEC sensor was applied for detection of HER2 in human serum samples with recoveries between 98.8 and 101%. Sensitive photoelectrochemical sensor based on Co₃O₄ nanoparticles modified with ascorbic acid oxidase for signal amplification is reported.