Single-step electrochemical sensing of ppt-level lead in leaf vegetables based on peroxidase-mimicking metal-organic framework

Nitrogen functionalized biomass derived mesoporous carbon nanomaterials for electrochemical detection of lead (II) ions

This study has explored the sustainable solution after designing an economical metal-free biomass-derived nanocarbon for the selective sensing of lead. The nitrogen and sulfur-rich mesoporous nanocarbon is designed through a facile hydrothermal-assisted thermal annealing method. The high-temperature treatment gave nanocarbon unique carbon dot decorated layered morphology, while nitrogen and sulfur precursor thiourea and melamine strengthened the nanomaterial stability, sensitivity, and selectivity toward lead metal ions. The high specific surface area of mesoporous nanocarbon viz., 1671.93 m2/g with the pore width and pore volume of 2.02 nm and 0.476 cm3/g has enhanced the conductivity of as-synthesized sensor, which helps in increasing sensitivity toward lead. The high conductivity was also confirmed through cyclic voltammetry, where an 80 % increment in current was observed in the case of the modified electrode when compared with bare GCE. The differential pulse normal voltammetry and differential pulse anodic stripping voltammetry were performed to calculate the detection limit, where an excellent detection limit of 22 nM was obtained from the DPASV technique. Moreover, the nanomaterial was also tested for detecting lead in tap water. The as-synthesized nanocomposite is highly efficient and selective for the detection of lead. This study will motivate the researchers to engineer sustainable and efficient devices for sensing metal pollutants.

Applications of nanomaterials with enzyme-like activity for the detection of phytochemicals and hazardous substances in plant samples

Plants such as herbs, vegetables, fruits, and cereals are closely related to human life. Developing effective testing methods to ensure their safety and quantify their active components are of significant importance. Recently, nanomaterials with enzyme-like activity (known as nanozymes) have been widely developed in various assays, including colorimetric, fluorescence, chemiluminescence, and electrochemical analysis. This review presents the latest advances in analyzing phytochemicals and hazardous substances in plant samples based on nanozymes, including some active ingredients, organophosphorus pesticides, heavy metal ions, and mycotoxins. Additionally, the current shortcomings and challenges of the actual sample analysis were discussed.

Emerging insights into the application of metal-organic framework (MOF)-based materials for electrochemical heavy metal ion detection

Heavy metal ions are one of the main sources of water pollution, which has become a major global problem. Given the growing need for heavy metal ion detection, electrochemical sensor stands out for its high sensitivity and efficiency. Metal-organic frameworks (MOFs) have garnered much interest as electrode modifiers for electrochemical detection of heavy metal ions owing to their significant specific surface area, tailored pore size, and catalytic activity. This review summarizes the progress of MOF-based materials, including pristine MOFs and MOF composites, in the electrochemical detection of various heavy metal ions. The synthetic methods of pristine MOFs, the detection mechanisms of heavy metal ions and the modification strategies of MOFs are introduced. Besides, the diverse applications of MOF-based materials in detecting both single and multiple heavy metal ions are presented. Furthermore, we present the current challenges and prospects for MOF-based materials in electrochemical heavy metal ion detection.

Energy difference-driven ROS reduction for electrochemical tracking crop growth sensitized with electron-migration nanostructures

Aiming for sustainable crop productivity under changing climate conditions, it is essential to develop handy models for in-situ monitoring of reactive oxygen species (ROS). Herein, this work reports a simple electrochemical sensing toward hydrogen peroxide (H2O2) for tracking crop growth status sensitized with electron-migration nanostructure. To be specific, Cu-based metal-organic frameworks (MOFs) with high HOMO energy level are designed for H2O2 reduction on account of Cu(I)/Cu(II) redox switchability. Importantly, the sensing performance is improved by electrochemically reduced graphene oxide (GO) with ready to use feature. To overcome the shortcomings of traditional liquid electrolytes, conductive hydrogel as semi-solid electrolyte exhibits the adhesive property to the cut plant petiole surface. Benefitting from the preferred composite models and conductive hydrogel, the electrochemical sensing toward H2O2 with high sensitivity and good anti-interference against the coexistent molecules, well qualified for acquiring plant growth status.

Efficient DNA walker guided by ordered cruciform-shaped DNA track for ultrasensitive and rapid electrochemical detection of lead ion

The rational design of DNA tracks is an effective pathway to guide the autonomous movement and high-efficiency recognition in DNA walkers, showing outstanding advantages for the cascade signal amplification of electrochemical biosensors. However, the uncontrolled distance between two adjacent tracks on the electrode could increase the risk of derailment and interruption of the reaction. Hence, a novel four-way balanced cruciform-shaped DNA track (C-DNT) was designed as a structured pathway to improve the effectiveness and stability of the reaction in DNA walkers. In this work, two kinds of cruciform-shaped DNA were interconnected as a robust structure that could avoid the invalid movement of the designed DNA walker on the electrode. When hairpin H2 was introduced onto the electrode, the strand displacement reaction (SDR) effectively triggered movements of the DNA walker along the cruciform-shaped track while leaving ferrocene (Fc) on the electrode, leading to a significant enhancement of the electrochemical signal. This design enabled the walker to move in an excellent organized and controllable manner, thus enhancing the reaction speed and walking efficiency. Compared to other walkers moving on random tracks, the reaction time of the C-DNT-based DNA walker could be reduced to 20 min. Lead ion (Pb2+) was used as a model target to evaluate the analytical performance of this biosensor, which exhibited a low detection limit of 0.033 pM along with a wide detection ranging from 0.1 pM to 500 nM. This strategy presented a novel concept for designing a high-performance DNA walker-based sensing platform for the detection of contaminants.

A SERS aptasensor based on a flexible substrate for interference-free detection of carbendazim in apple

Non-destructive and interference-free monitoring of pesticide residue on the surface of fruits is still a challenge. Herein, a SERS aptasensor based on a flexible substrate was established for effective carbendazim (CBZ) detection on apple peel. In this sensor, electrospun PVDF/CQDs film served as a flexible supporting substrate. AuNS@Ag was liquid-liquid self-assembled on the PVDF/CQDs film to form a uniform and highly active SERS substrate. During the detection process, aptamers specifically capture the CBZ molecules, while nitrile-mediated Raman tag (MMBN) linked to AuNPs provided optical anti-interference signals. The results showed that the developed sensor had high sensitivity, selectivity, reproducibility, and stability for CBZ detection. Importantly, the flexibility of the SERS substrate helped the sensor realize non-invasive CBZ detection at a concentration as low as 1.20 ng/cm2 on apple peel, which is much lower than the maximum residue limits of CBZ in apples.

Recent advances in metal-organic framework (MOF)-based agricultural sensors for metal ions: a review

Metal ions have great significance for agricultural development, food safety, and human health. In turn, there exists an imperative need for the development of novel, sensitive, and reliable sensing techniques for various metal ions. Agricultural sensors for the diagnosis of both agricultural safety and nutritional health can establish quality and safety traceability systems of both agro-products and food to guarantee human health, even life safety. Metal-organic frameworks (MOFs) are utilized widely for the design of diversified sensors due to their distinctive structural characteristics and extraordinary optical and electrical properties. To serve agricultural sensors better, this review is dedicated to providing a brief overview of the synthesis of MOFs, the modification of MOFs, the fabrication of MOF-based film electrodes, the applications of MOF-based agricultural sensors for metal ions, which are centered on electrochemical sensors and optical sensors, and current challenges of MOF-based agricultural sensors. In addition, this review also provides potential future opportunities for the development and practical application of agricultural sensors.

Tunable metal-organic frameworks assist in catalyzing DNAzymes with amplification platforms for biomedical applications

Various binding modes of tunable metal organic frameworks (MOFs) and functional DNAzymes (Dzs) synergistically catalyze the emergence of abundant functional nanoplatforms. Given their serial variability in formation, structural designability, and functional controllability, Dzs@MOFs tend to be excellent building blocks for the precise "intelligent" manufacture of functional materials. To present a clear outline of this new field, this review systematically summarizes the progress of Dz integration into MOFs (MOFs@Dzs) through different methods, including various surface infiltration, pore encapsulation, covalent binding, and biomimetic mineralization methods. Atomic-level and time-resolved catalytic mechanisms for biosensing and imaging are made possible by the complex interplay of the distinct molecular structure of Dzs@MOF, conformational flexibility, and dynamic regulation of metal ions. Exploiting the precision of DNAzymes, MOFs@Dzs constructed a combined nanotherapy platform to guide intracellular drug synthesis, photodynamic therapy, catalytic therapy, and immunotherapy to enhance gene therapy in different ways, solving the problems of intracellular delivery inefficiency and insufficient supply of cofactors. MOFs@Dzs nanostructures have become excellent candidates for biosensing, bioimaging, amplification delivery, and targeted cancer gene therapy while emphasizing major advancements and seminal endeavors in the fields of biosensing (nucleic acid, protein, enzyme activity, small molecules, and cancer cells), biological imaging, and targeted cancer gene delivery and gene therapy. Overall, based on the results demonstrated to date, we discuss the challenges that the emerging MOFs@Dzs might encounter in practical future applications and briefly look forward to their bright prospects in other fields.

Allosteric switch for electrochemical aptasensor toward heavy metals pollution of Lentinus edodes sensitized with porphyrinic metal-organic frameworks

BACKGROUND

Lentinan medicament from Lentinus edodes has been considered as natural medicinal products with minimal side effects for cancer therapy, but Lentinus edodes are easily polluted by nonbiodegradable heavy metals, especially silver ion (Ag+). Therefore, it is highly desirable to monitor Ag + pollution in Lentinus edodes considering their adverse impact on lentinan medicament. Electrochemical sensor isn't affected from the interference of matrix turbidity and color, and offers a powerful means for determination of variant analytes. As for electrochemical sensing toward Ag+, there is a great need to design efficient signal probes for specific recognition and signal generation.

RESULTS

We present an appropriate electrochemical aptasensor for Ag + assay based on biomimetic catalysis of porphyrin-encapsulated MOF (PorMOF) and allosteric switch of C-rich DNA. Thanks to the excellent biocompatibility, PorMOFs as nanozyme are used to design signal probes by loading duplex-like DNA scaffold. Owing to the specific recognition of Ag+ toward cytosine (C) base-rich DNA, PorMOF at the distal end was close to the underlying electrode via C-Ag+-C formation, leading to an enhanced current of catalytic hydroxylamine oxidation for signal generation. Using the positive correlation between current response and Ag+ level, the electrochemical system provides a promising means for on-line monitoring of Ag+ in Lentinus edodes with recoveries from 92.8% to 106.4% and relative standard deviation from 3.98% to 8.24%, verifying the applicability of the electrochemical aptasensor toward Ag+ in Lentinus edodes.

SIGNIFICANCE AND NOVELTY

With merits of portability, simple operation, and rapid response, the electrochemical pattern offers a useful solution for on-line monitoring of Ag+ in Lentinus edodes. By altering the DNA sequence, the proposed aptasensor provides a powerful way for monitoring other heavy metals, capable of protecting medicament production from heavy metal pollution.

Engineered DNA molecular machine for ultrasensitive detection of environmental lead pollution

Dynamic monitoring of environmental Pb2+ is of utmost importance for food safety and personal well-being. Herein, we report a novel, rapid, and practical fluorescence detection platform for Pb2+. The platform comprises two essential components: an engineered DNAzyme probe (EDP) and a responsive functionalized probe (RFP). The EDP demonstrates specific recognition of Pb2+ and the subsequent release of free DNA fragments. The released DNA fragments are then captured using the RFP to form DNA complexes, which undergo multiple cascade amplification reactions involving polymerases and nickases, resulting in the generation of a large number of fluorescence signals. These signals can detect Pb2+ at concentrations as low as 0.114 nmol/L, with a dynamic range spanning from 0.1 nmol/L to 50 nmol/L. Moreover, the platform exhibits excellent sensitivity and selectivity for Pb2+ detection. To further validate its effectiveness, we successfully quantitatively detected lead contamination in water from Chaohu Lake, and the results aligned closely with those obtained using inductively coupled plasma-mass spectrometry (ICP-MS). Moreover, this platform is suitable for detecting Pb2+ in seawater, soil, and fish samples. These findings confirm the suitability of the current detection platform for the dynamic assessment of Pb contamination in ecological environments, thereby contributing to environmental and food safety.

Competitive electrochemical sensing for cancer cell evaluation based on thionine-interlinked signal probes

The development of effective methods for tracking cancer cells is of significant importance in the early diagnosis and treatment of tumor diseases. Compared with the developed techniques, the electrochemical assay has shown considerable potential for monitoring glycan expression on the cell surface using nondestructive means. However, the application expansion of the electrochemical strategy is strongly impeded owing to its dependence on electroactive species. In this study, a competitive electrochemical strategy was reported for monitoring cancer cells based on mannose (a typical glycan) as a clinical biomarker. Herein, functionalized carbon nanotubes were used to load the thiomannosyl dimer, and thionine-interlinking signal probes were designed for competitive recognition. After effective competition between cancer cells and the anchored mannose, a decreased current was obtained as the cell concentration increased. Under optimal conditions, the proposed biosensor exhibited attractive performance for cancer cell analysis with a detection limit as low as 20 cells per mL for QGY-7701 and 35 cells per mL for QGY-7703, facilitating great promise for the sensitive detection of cancer cells and thus showing potential applications in cancer diagnosis.

A novel electrochemical sensor for simultaneous detection of Cd2+ and Pb2+ by MXene aerogel-CuO/carbon cloth flexible electrode based on oxygen vacancy and bismuth film

Herein, a novel MXene aerogel-CuO/carbon cloth (MXA-CuO/CC) electrochemical sensor was constructed, and the synergistic adsorption of heavy metal ions by oxygen vacancies and Bi (III) was investigated with Cd²⁺ and Pb²⁺ as detection targets. The oxygen vacancies of CuO have a strong affinity for heavy metal ions, which promoted the adsorption of Cd²⁺ and Pb²⁺ on the electrode surface. In addition, the introduced Bi (III) can form alloys with heavy metal ions, which effectively enhanced the adsorption capacity of sensing electrodes for Cd²⁺ and Pb²⁺. Differential pulse anodic stripping voltammetry (DPASV) was used to study the performance of MXA-CuO/CC sensitive electrode for the detection of Cd²⁺ and Pb²⁺ separately and simultaneously. The constructed sensing electrode has excellent detection performance, and can detect Cd²⁺ (4 μg L^-1- 800 μg L^-1) and Pb²⁺ (4 μg L^-1- 1200 μg L^-1) simultaneously with detection limits of 0.3 μg L^-1 (Cd²⁺) and 0.2 μg L^-1 (Pb²⁺), respectively. The proposed sensor electrode also has good anti-interference performance, excellent stability and reproducibility. It is worth mentioning that the proposed method can accurately detect Cd²⁺ and Pb²⁺ in food and water samples, which is consistent with the detection results of inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectroscopy (AAS).

Two-Dimensional Non-Carbon Materials-Based Electrochemical Printed Sensors: An Updated Review

Recently, there has been increasing interest in electrochemical printed sensors for a wide range of applications such as biomedical, pharmaceutical, food safety, and environmental fields. A major challenge is to obtain selective, sensitive, and reliable sensing platforms that can meet the stringent performance requirements of these application areas. Two-dimensional (2D) nanomaterials advances have accelerated the performance of electrochemical sensors towards more practical approaches. This review discusses the recent development of electrochemical printed sensors, with emphasis on the integration of non-carbon 2D materials as sensing platforms. A brief introduction to printed electrochemical sensors and electrochemical technique analysis are presented in the first section of this review. Subsequently, sensor surface functionalization and modification techniques including drop-casting, electrodeposition, and printing of functional ink are discussed. In the next section, we review recent insights into novel fabrication methodologies, electrochemical techniques, and sensors' performances of the most used transition metal dichalcogenides materials (such as MoS₂, MoSe₂, and WS₂), MXenes, and hexagonal boron-nitride (hBN). Finally, the challenges that are faced by electrochemical printed sensors are highlighted in the conclusion. This review is not only useful to provide insights for researchers that are currently working in the related area, but also instructive to the ones new to this field.

Metal-porphyrinic framework nanotechnologies in modern agricultural management

Metal-porphyrinic frameworks are an important subclass of metal-organic frameworks (MOFs). These porous materials exhibit a large number of applications for sustainable development and related environmental considerations. Their attractive features include (1) as a free base or metalated with zinc(II) or iron(II or III), they are environmentally benign, and (2) they absorb visible light and are emissive and semi-conducting, making them convenient tools for sensing agrochemicals. But the key feature that makes these nano-sized pristine materials or their composites in many ways superior to most MOFs is their ability to photo-generate reactive oxygen species with visible light, including singlet oxygen. This review describes important issues related to agriculture, including controlled delivery of pesticides and agrochemicals, detection of pesticides and pathogenic metals, elimination of pesticides and toxic metals, and photodynamic antimicrobial activity, and has an important implication for food safety. This comprehensive review presents the progress of the rather rapid developments of these functional and increasingly nano-sized materials and composites in the area of sustainable agriculture.

Platform Formed from ZIF-8 and DNAzyme: "Turn-On" Fluorescence Assay for Simple, High-Sensitivity, and High-Selectivity Detection of Pb2

Lead contamination has posed a potential threat to the environment and food safety, arousing extensive concern. In this work, we fabricated a novel fluorescent sensing platform based on zeolitic imidazolate framework-8 (ZIF-8) and DNAzyme for monitoring Pb²⁺ in water and fish samples. ZIF-8 was proposed as a fluorescence quencher with the advantages of simple synthesis, low cost, and high quenching efficiency. The Pb²⁺-dependent GR5 DNAzyme containing the large ssDNA loop can be adsorbed onto ZIF-8 accompanied by fluorescence quenching. Upon binding with Pb²⁺, GR5 DNAzyme was activated and cleaved, leading to the release of FAM-labeled 5-base ssDNA, which restored the fluorescence. The "turn-on" assay can detect Pb²⁺ through the one-pot procedure in the range of 0.01-10.0 nM with a detection limit of 7.1 pM. The platform is promising for on-site monitoring of Pb²⁺ owing to the excellent performance of high sensitivity, low background, strong anti-interference ability, and simple operation.

Amplification of the Fluorescence Signal with Clustered Regularly Interspaced Short Palindromic Repeats-Cas12a Based on Au Nanoparticle-DNAzyme Probe and On-Site Detection of Pb2+ Via the Photonic Crystal Chip

Although great headway has been made in DNAzyme-based detection of Pb²⁺, its adaptability, sensitivity, and accessibility in complex media still need to be improved. For this, we introduce new ways to surmount these hurdles. First, a spherical nucleic acid (SNA) fluorescence probe (Au nanoparticles-DNAzyme probe) is utilized to specifically identify Pb²⁺ and its suitability for precise detection of Pb²⁺ in complex samples due to its excellent nuclease resistance. Second, the sensitivity of Pb²⁺ detection is greatly enhanced via the use of a clustered regularly interspaced short palindromic repeats-Cas12a with target recognition accuracy to amplify the fluorescent signal upon the trans cleavage of the SNA (signal probe), and the limit of detection reaches as low as 86 fM. Third, we boost the fluorescence on photonic crystal chips with a bionic periodic arrangement by employing a straightforward detection device (smartphone and portable UV lamp) to achieve on-site detection of Pb²⁺ with the limit of detection as low as 24 pM. Based on the abovementioned efforts, the modified Pb²⁺ fluorescence sensor has the advantages of higher sensitivity, better specificity, accessibility, less sample consumption, and so forth. Moreover, it can be applied to accurately detect Pb²⁺ in complex biological or environmental samples, which is of great promise for widespread applications.

DNAzyme-based cascade signal amplification strategy for highly sensitive detection of lead ions in the environment

Lead ions are one of many common environmental pollutants, that can cause posing a serious threat to people's health, thus, their efficient and sensitive detection is important. We propose a cascade signal amplification sensor using a DNAzyme-based strand displacement amplification (SDA) and hybridization chain reaction (HCR) for the high-sensitivity detection of Pb²⁺. In the demonstrated sensor system, the target metal ion can activate DNAzyme to cause a strand displacement reaction. Under the synergistic action of polymerase and nickase, large numbers of DNA strands are generated that can initiate HCR. The subsequent HCR can restore the fluorescence intensity of the FAM quenched for the fluorescence resonance energy transfer effect, which exhibits a strong fluorescence signal. The DNAzyme-based sensor allowed the detection of Pb²⁺ down to 16.8 pM and resulted in a good dynamic line relationship ranging from 50 pM to 500 nM, and the biosensor also showed good selectivity. Furthermore, we confirmed that the proposed sensor can still detect lead ions in complex environments such as lake water, milk, and serum. We believe these findings will provide new ideas for the detection of toxic elements ions in the environment and food.

Simple Design Concept for Dual-Channel Detection of Ochratoxin A Based on Bifunctional Metal-Organic Framework

A simple fluorescence and electrochemical dual-channel biosensor based on bifunctional Zr(IV)-based metal-organic framework (Zr-MOF) was proposed to detect Ochratoxin A (OTA). The bifunctional Zr-MOF, with photoluminescence properties and enormous electroactive ligands, was exploited to load OTA-specific aptamers for designing signal probes, greatly simplifying the probe-fabrication process and improving sensing reliability. Upon specific recognition of aptamer toward OTA, the anchored probe was released from the sensing interface into the reaction solution. In this circumstance, the increased amount of the signal probe in reaction solution led to an enhanced fluorescence response, while the decreased amount of the signal probe on the sensing interface resulted in a diminished electrochemical response. According to the dual-channel signal change with increasing OTA concentration, the visual fluorescence strategy was established for intuitive OTA detection, and meanwhile, sensitive electrochemical assay with a detection limit of 0.024 pg/mL was also achieved with the help of one-step electrodeposition as a sensing platform. Moreover, the proposed dual-channel assay has been successfully applied to determine OTA levels in corn samples with rapid response, superior accuracy, and high anti-interference capability, providing a promising method for food safety monitoring.

Three-dimensional Cd(ii) porphyrin metal–organic frameworks for the colorimetric sensing of Electron donors

Three MOFs with metalloporphyrin lined, large square 1D channels were used as colorimetric sensors for electron donors. Exposure to amine vapours caused a redshift of the Soret absorption bands of the metalloporphyrin.

Midas Touch: Engineering Activity of Metal-Organic Frameworks via Coordination for Biosensing

The ever-increasing attention on the highly sensitive biosensors pushes people to explore functional nanomaterials for signal amplification. To endow inert metal-organic frameworks (MOFs) with enzyme mimicking activity, a simple strategy of introducing Cu²⁺ via coordination with 2,2'-bipyridine ligands of Zr-MOF, just like "Midas touch," is proposed. More details on the coordination environment of Cu active sites in Zr-MOF-Cu are disclosed via electron paramagnetic resonance and synchrotron-radiation-based X-ray absorption fine structure analyses. The as-prepared Zr-MOF-Cu exhibits unparalleled catalytic ability, which can catalyze ascorbic acid (AA) to dehydroascorbic acid and further stimulate the reaction with o-phenylenediamine to produce fluorescent signal probes with 8-fold signal amplification. On the basis of catalyzing the dephosphorylation process of l-ascorbic acid-2-phosphate to yield AA via alkaline phosphatase (ALP) and AA-dependent signal responses, a universal fluorescent system has been successfully constructed for quantitative measurement of the activity of ALP and the ALP-related enzyme-linked immunosorbent assay with carcinoembryonic antigen as a model. Moreover, the stable loading of Cu active sites endows the sensing platform with anti-inference capacity and enables its reuse without loss of catalytic activity after 6 months.

The strength in Numbers! Porphyrin hybrid nanostructured materials for chemical sensing

The development of chemical sensors is an urgent need for both environmental and health issues. The breakthrough needed for the advancement of these devices is the development of efficient receptors. Porphyrins have been widely used as sensing layers in chemical sensors, but their integration with nanostructures can greatly boost the performance of these macrocycles, improving from one side the stability of the sensing layer, and from the other, offering additional interaction mechanisms with target analytes. We present here some recent examples of hybrid materials prepared by the integration of porphyrins with metal and metal oxide nanoparticles, porphyrin-based metal organic frameworks and their exploitation as sensing layers in chemical sensors.

Label-free DNAzyme assays for dually amplified and one-pot detection of lead pollution

Lead pollution in water and soil often transfers to food, advocating tools for on-site detection of lead pollution to ensure both environmental and food safety. We proposed a label-free, dually amplified and homogeneous DNAzyme assay for sensitive and one-pot detection of lead pollution. Instead of using chemically modified DNA substrate, a structure-response digestion process was introduced to monitor Pb²⁺ presence-induced cleavage process of unlabeled substrate, further amplifying the response signals and eliminating the use of labeled DNA probes. The DNAzyme assay allowed to detect Pb²⁺ as low as 0.12 nM and endued a dynamic range from 0.1 nM to 30 nM. In addition, it can specifically identify Pb²⁺ among other metal ions. We demonstrated that the DNAzyme assay can precisely detect Pb²⁺ in tap water, milk and fish. Thus, the DNAzyme assay is promising for on-site monitoring lead pollution risk and ensuring environmental and food safety.