Etched multicore fiber sensor using copper oxide and gold nanoparticles decorated graphene oxide structure for cancer cells detection

ECL cytosensor for sensitive and label-free detection of circulating tumor cells based on hierarchical flower-like gold microstructures

The development of sensitive and efficient cell sensing strategies to detect circulating tumor cells (CTCs) in peripheral blood is crucial for the early diagnosis and prognostic assessment of cancer clinical treatment. Herein, an array of hierarchical flower-like gold microstructures (HFGMs) with anisotropic nanotips was synthesized by a simple electrodeposition method and used as a capture substrate to construct an ECL cytosensor based on the specific recognition of target cells by aptamers. The complex topography of the HFGMs array not only catalyzed the enhancement of ECL signals, but also induced the cells to generate more filopodia, improving the capture efficiency and shortening the capture time. The effect of topographic roughness on cell growth and adhesion propensity was also investigated, while the cell capture efficiency was proposed to be an important indicator affecting the accuracy of the ECL cytosensor. In addition, the capture of cells on the electrode surface increased the steric hindrance, which caused ECL signal changes in the Ru(bpy)32+ and TPrA system, realizing the quantitative detection of MCF-7 cells. The detection range of the sensor was from 102 to 106 cells mL-1 and the detection limit was 18 cells mL-1. The proposed detection method avoids the process of separation, labeling and counting, which has great potential for sensitive detection in clinical applications.

Development of a biophotonic fiber sensor using direct-taper and anti-taper techniques with seven-core and four-core fiber for the detection of doxorubicin in cancer treatment

Doxorubicin (DOX) is an important drug for cancer treatment, but its clinical application is limited due to its toxicity and side effects. Therefore, detecting the concentration of DOX during treatment is crucial for enhancing efficacy and reducing side effects. In this study, the authors developed a biophotonic fiber sensor based on localized surface plasmon resonance (LSPR) with the multimode fiber (MMF)-four core fiber (FCF)-seven core fiber (SCF)-MMF-based direct-taper and anti-taper structures for the specific detection of DOX. Compared to other detection methods, it has the advantages of high sensitivity, low cost, and strong anti-interference ability. In this experiment, multi-walled carbon nanotubes (MWCNTs), cerium-oxide nanorods (CeO2-NRs), and gold nanoparticles (AuNPs) were immobilized on the probe surface to enhance the sensor's biocompatibility. MWCNTs and CeO2-NRs provided more binding sites for the fixation of AuNPs. By immobilizing AuNPs on the surface, the LSPR was stimulated by the evanescent field to detect DOX. The sensor surface was functionalized with DOX aptamers for specific detection, enhancing its specificity. The experiments demonstrated that within a linear detection range of 0-10 µM, the sensitivity of the sensor is 0.77 nm/µM, and the limit of detection (LoD) is 0.42 µM. Additionally, the probe's repeatability, reproducibility, stability, and selectivity were evaluated, indicating that the probe has high potential for detecting DOX during cancer treatment.

An electrochemical biosensor based on phage-encoded protein RBP 41 for rapid and sensitive detection of Salmonella

Salmonellosis caused by Salmonella contaminated food poses a serious threat to human health. The rapid and accurate detection of Salmonella is critical for preventing foodborne illness outbreaks. In this study, an electrochemical biosensor was developed using a newly identified biorecognition element, RBP 41, which is capable of specifically recognizing and binding to Salmonella. The biosensor was constructed through a layer-by-layer assembly of graphene oxide (GO), gold nanoparticles (GNPs), and RBP 41 on a glassy carbon electrode (GCE), with the GNPs amplifying the detection signal. The established biosensor was able to detect Salmonella in concentrations ranging from 3 to 106 CFU/mL within approximately 30 min by using differential pulse voltammetry (DPV) signal, and the estimated detection limit was to be 0.2984 Log10 CFU/mL. The biosensor demonstrated excellent specificity and was effective in detecting Salmonella in food matrices, such as skim milk and lettuce. Overall, this study highlights the potential of phage tail receptor binding proteins in biosensing and the proposed biosensor as a promising alternative for rapid and sensitive Salmonella detection in various samples.

All-fiber label-free optical fiber biosensors: from modern technologies to current applications [Invited]

Biosensors are established as promising analytical tools for detecting various analytes important in biomedicine and environmental monitoring. Using fiber optic technology as a sensing element in biosensors offers low cost, high sensitivity, chemical inertness, and immunity to electromagnetic interference. Optical fiber sensors can be used in in vivo applications and multiplexed to detect several targets simultaneously. Certain configurations of optical fiber technology allow the detection of analytes in a label-free manner. This review aims to discuss recent advances in label-free optical fiber biosensors from a technological and application standpoint. First, modern technologies used to build label-free optical fiber-based sensors will be discussed. Then, current applications where these technologies are applied are elucidated. Namely, examples of detecting soluble cancer biomarkers, hormones, viruses, bacteria, and cells are presented.

A novel self-enhanced electrochemiluminescent aptamer sensor based on ternary nanocomposite PEI/RuSi-MWCNTs for the detection of profenofos residues in vegetables

In this work, a novel ternary nanocomposite of PEI/RuSi-MWCNTs was designed and synthesized for the first time, which an ultrasensitive and self-enhanced electrochemiluminescent (ECL) aptasensor was developed for the detection of profenofos residues in vegetables. The self-enhanced complex PEI-Ru (II) enhanced the emission and stability of ECL, and the multi-walled carbon nanotubes (MWCNTs) acted as an excellent carrier and signal amplification. The PEI/RuSi-MWCNTs were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM) and energy dispersive spectrometer (EDS). The incorporation of gold nanoparticles (AuNPs) improved the performance of the sensor and provided a platform for the immobilization of the aptamer. The results of the experiment showed that the presence of profenofos significantly suppressed the electrochemiluminescence intensity of the sensor. The detection sensitivity of the aptamer sensor was in the range of 1 × 10-2 to 1 × 103 ng/mL. Under optimal conditions, the limit of detection (LOD) of the sensor for profenofos was 1.482 × 10-3 ng/mL. The sensor had excellent stability, reproducibility and specificity. The recoveries of the sensor ranged from 92.29 % to 106.47 % in real sample tests.

Cascaded plastic optical fiber based SPR sensor for simultaneous measurement of refractive index and temperature

A cascaded side-polish plastic optical fiber (POF) and FONTEX optical fiber based surface plasmon resonance (SPR) sensor is proposed for simultaneous measurement of refractive index (RI) and temperature. The side-polish POF and FONTEX optical fiber are connected by using the UV glue in a Teflon plastic tube. The SPR phenomenon can be excited at both of the side-polish region and the FONTEX fiber cladding. The polydimethylsiloxane (PDMS) is coated on the side-polish POF to get a temperature sensing channel. Due to the low RI sensitivity of the FONTEX optical fiber, the cascaded fiber sensor can obtain a broader RI measurement range with a low crosstalk. An RI sensitivity of 700 nm/RIU in the RI measurement range of 1.335-1.39 and a temperature sensitivity of -1.02 nm/°C measured in deionized water with a range of 20-60 °C are obtained. In addition, the cascaded POF based SPR sensor has potential application prospects in the field of biochemical sensing.

Rapid and noninvasive cell assay by microfluidic-integrated intracavity evanescent field absorption in a fiber ring laser

BACKGROUND

Highly sensitive and rapid detection of cell concentration and interfacial molecular events is of great value for biological, biomedical, and chemical research. Most traditional biosensors require large sample volumes and complicated functional modifications of the surface. It is of great significance to develop label-free biosensor platforms with minimal sample consumption for studying cell concentration changes and interfacial molecular events without labor-intensive procedures.

RESULTS

Here, a fiber-optic biosensor based on intracavity evanescent field absorption sensing is designed for sensitive and label-free cell assays for the first time. The interaction between the cells and the evanescent field is enhanced by introducing microfluidic-integrated intracavity absorption in a fiber ring laser. This strategy extends the range of targeted analytes to include quantification of a large number of targets on a surface and improves the detection sensitivity of the fiber-optic biosensor. The level of sensing resolution could be improved from 10-4 RIU to 10-7 RIU using this strategy. The stem cells were studied over a wide concentration range (from 500 to 1.2 × 105 cells/ml) and were measured sequentially. By measuring the output power of the intracavity absorption sensing system, the cell concentration can be directly determined in a label-free manner. The results show that dozens of stem cells can be sensitively detected with a sample consumption of 72 μL. The response was fast (15 s) with a low temperature cross-sensitivity of 0.031 cells·ml-1/°C.

SIGNIFICANCE

The proposed method suggests its capacity for true label-free and noninvasive cell assays with a low limit of detection and small sample consumption. This has the potential to be used as a universal tool for quantitative and qualitative characterization of various cells and other biochemical analytes.

A self-powered photoelectrochemical biosensing platform for H-FABP monitoring mediated by CsPbBr3@COF-V

Advanced bioelectronic detection based on the integration of modern optical electronics and biological systems has a broad prospect. The strategy of cathode signal amplification in self-powered photoelectrochemical (PEC) immunosensors with excellent performance is rarely reported in the field of immune analysis. Herein, the work demonstrates a self-powered PEC biosensor formed with BiOI photocathode and WO3/SnS2/ZnS photoanode, and CsPbBr3@COF-V was used as the photocathode signal quenching source for the quantitative monitoring of heart fatty acid binding protein (H-FABP). The high efficiency and stable self-powered biosensor formed not only provides continuous and powerful photocurrent response for bioanalysis through reasonable stepped band structure, but also effectively eliminates the interference of reducing substances. The quenching source CsPbBr3@COF-V greatly affects the photocurrent response due to steric hindrance, weak conductivity, competition with the substrate for dissolved oxygen and excitation light source. And the intervention of this key factor achieves multiple signal amplification effect and opens up an innovative vision for self-powered PEC immunosensor. Taking H-FABP as a representative analyte, the proposed signal amplification self-powered photoelectrochemical presents a broad linear range from 0.0005 to 150 ng/mL with the detection limit of 0.19 pg/mL.

WaveFlex biosensor based on S-tapered and waist-expanded technique for detection of glycosylated hemoglobin

Glycosylated hemoglobin (HbA1c) is considered a new standard for the detection of diabetes mellitus because it is more accurate than regular blood sugar tests and there is no need to take blood on an empty stomach or at a specific time. In this work, we have developed a novel optical fiber biosensor, referred to as the "WaveFlex biosensor," which operates on the principles of localized surface plasmon resonance (LSPR) plasmonic wave. The sensor is fabricated using an innovative S-tapered and waist-expanded technique, enabling it to effectively detect HbA1c. Compared to the HbA1c sensors currently in use, HbA1c optical fiber sensors possess the characteristics of high sensitivity, low cost, and strong anti-interference ability. The gold nanoparticles (AuNPs), cerium oxide (CeO2) nanorods (NRs), and tungsten disulfide (WS2) nanosheets (NSs) are functionalized to improve the effectiveness of the fiber sensor on the probe surface. AuNPs are utilized to generate LSPR by the excitation of evanescent waves to amplify the sensing signal. The CeO2-NRs can have a strong metal-carrier interaction with AuNPs, enhancing the cascade of CeO2-NRs and AuNPs. The WS2-NSs with layered fold structure have a large specific surface area. Therefore, the combination of CeO2-NRs and WS2-NSs is conducive to the binding of antibodies and the addition of sites. The functionalized antibodies on the fiber make the sensor probe capable of specific selection. The developed probe is applied to test the HbA1c solution over concentrations of 0-1000 µg/mL, and the sensitivity and limits of detection of 1.195×10-5 a.u./(µg/mL) and 1.66 µg/mL are obtained, respectively. The sensor probe is also evaluated using assays for reproducibility, reusability, selectivity, and pH. According to the findings, a novel method for detecting blood glucose based on a plasmonic biosensor is proposed.

An ultrasensitive J-shaped optical fiber LSPR aptasensor for the detection of Helicobacter pylori

The development of label-free and sensitive detection of pathogenic bacteria is of great significance for disease prevention and public health protection. In this study, an originally bent structure, named as J-shaped optical fiber probe, was first designed to engineer a localized surface plasmon resonance (LSPR) aptamer biosensor for the rapid and ultrasensitive detection of Helicobacter pylori (H. pylori). The J-shaped optical fiber probe exhibited a significant improvement in refractive index sensitivity (RIS) and LSPR signal response. Meantime, the original sequence of aptamer was truncated in order to effectively capture H. pylori on the optical fiber surface. Besides, a spacer nucleic acid with short stem-loop structure was adopted to control the aptamer density on gold nanoparticles (AuNPs) on the surface of the J-shaped optical fiber probe, which displayed a further enhancement in LSPR signal response. Benefitting from these creative designs, the proposed LSPR biosensor can realize label-free and sensitive detection of H. pylori with a detection limit as low as 45 CFU/mL and a wide linear range from 1.0 × 102 CFU/mL to 1.0 × 108 CFU/mL. At the same time, the sensing strategy can detect the pathogenic bacteria from actual water samples in one step just in 30 min without any sample pretreatment. Due to the advantages of ease-to-preparation, high sensitivity, and rapid analysis, this proposed J-shaped optical fiber LSPR aptasensor can provide a potential strategy for point-of-caring detection of pathogenic bacteria in environmental monitoring and disease diagnosis.

Tumor cell membrane-coated continuous electrochemical sensor for GLUT1 inhibitor screening

Glucose transporter 1 (GLUT1) overexpression in tumor cells is a potential target for drug therapy, but few studies have reported screening GLUT1 inhibitors from natural or synthetic compounds. With current analysis techniques, it is difficult to accurately monitor the GLUT1 inhibitory effect of drug molecules in real-time. We developed a cell membrane-based glucose sensor (CMGS) that integrated a hydrogel electrode with tumor cell membranes to monitor GLUT1 transmembrane transport and screen for GLUT1 inhibitors in traditional Chinese medicines (TCMs). CMGS is compatible with cell membranes of various origins, including different types of tumors and cell lines with GLUT1 expression knocked down by small interfering RNA or small molecules. Based on CMGS continuous monitoring technique, we investigated the glucose transport kinetics of cell membranes with varying levels of GLUT1 expression. We used CMGS to determine the GLUT1-inhibitory effects of drug monomers with similar structures from Scutellaria baicalensis and catechins families. Results were consistent with those of the cellular glucose uptake test and molecular-docking simulation. CMGS could accurately screen drug molecules in TCMs that inhibit GLUT1, providing a new strategy for studying transmembrane protein-receptor interactions.

Alanine aminotransferase detection using TIT assisted four tapered fiber structure-based LSPR sensor: From healthcare to marine life

Alanine aminotransferase (ALT), a type of inactive enzyme largely present in fish liver cells, is essential for the tricarboxylic acid (TCA) cycle. Monitoring ALT activity in the blood/hepatocellular layer has been demonstrated to be a sensitive sign of liver dysfunction and an essential method for determining the health status of fish. This study details the development of a multi-layer material (hybrids of graphene oxide and multi-walled carbon nanotubes (GO/MWCNTs), gold nanoparticles (AuNPs), and glutamate oxidase (GluOx) enzyme) immobilized localized surface plasmon resonance based unique fiber structure biosensor for the quantitative determination of ALT biomolecules at concentrations ranging from 0 to 1000 U/L. For this kind of detection, a novel taper-in-taper with four tapered (TIT4T) structure based on single-mode fiber has been developed. In addition to AuNPs, GO/MWCNTs were immobilized in the probe's sensing region to increase its LSPR efficiency and sensitivity. Synthesis of AuNPs was carried out utilizing the Turkevich method. The selectivity of the sensor is ensured by the effective immobilization of GluOx on the surface treatment. The linearity of sensor is in the range of 0-1000 U/L, whereas the sensitivity, limit of detection, and detection time are individually found at 7.5 p.m./(U/L), 4.84 U/L and 20 min, respectively. After evaluating the prospective applications of the sensors, the sensors' reusability, reproducibility, stability, pH test, and selectivity have all been found to be satisfactory. Proposed fiber optic biosensors have high sensitivity, robustness, reliability, fast detection, no electromagnetic interference, low cost, real-time monitoring, and biocompatible.

Optical Detection of Cancer Cells Using Lab-on-a-Chip

The global need for accurate and efficient cancer cell detection in biomedicine and clinical diagnosis has driven extensive research and technological development in the field. Precision, high-throughput, non-invasive separation, detection, and classification of individual cells are critical requirements for successful technology. Lab-on-a-chip devices offer enormous potential for solving biological and medical problems and have become a priority research area for microanalysis and manipulating cells. This paper reviews recent developments in the detection of cancer cells using the microfluidics-based lab-on-a-chip method, focusing on describing and explaining techniques that use optical phenomena and a plethora of probes for sensing, amplification, and immobilization. The paper describes how optics are applied in each experimental method, highlighting their advantages and disadvantages. The discussion includes a summary of current challenges and prospects for cancer diagnosis.

An NIR light-responsive "on-off-on" photoelectrochemical aptasensor for carcinoembryonic antigen assay based on Y-shaped DNA

This work develops a novel photoelectrochemical sensor for the detection of carcinoembryonic antigen (CEA) based on the composite of UCNPs with semiconductors and conformational changes in the DNA structure. Firstly, SnS₂, ZnIn₂S₄ and UCNPs were assembled on the surface of the ITO electrode. Then Au NPs were dropped, which could facilitate the coupling of CdSe NPs modified DNA1 via Au-S bond, giving an ITO/SnS₂/ZnIn₂S₄/UCNPs/CdSe heterojunction structure. When irradiated with 980 nm near-infrared (NIR) light, the UV-visible light emitted by the UCNPs could excite the nanocomposite, producing an enhanced photoelectric reaction. Subsequently, CEA aptamer and DNA2-modified SiO₂ were added to form a Y-shaped DNA structure. At this time, the photocurrent was significantly reduced by the combination of the light-blocking effect of SiO₂ and the departure of CdSe NPs from the electrode surface. When the target CEA was added, the recognition between CEA and the aptamer led to the collapse of the Y-shaped DNA structure, the restoration of hairpin DNA and the proximity of CdSe to the electrode. Accordingly, the photocurrent signals enhanced again. Under optimal experimental conditions, the detection limit as low as 0.3 pg mL^-1 was obtained with good selectivity, achieving a sensitive "on-off-on" photoelectrochemical sensor for CEA detection.

Recent Advancements of LSPR Fiber-Optic Biosensing: Combination Methods, Structure, and Prospects

Fiber-optic biosensors based on localized surface plasmon resonance (LSPR) have the advantages of great biocompatibility, label-free, strong stability, and real-time monitoring of various analytes. LSPR fiber-optic biosensors have attracted extensive research attention in the fields of environmental science, clinical medicine, disease diagnosis, and food safety. The latest development of LSPR fiber-optic biosensors in recent years has focused on the detection of clinical disease markers and the detection of various toxic substances in the environment and the progress of new sensitization mechanisms in LSPR fiber-optic sensors. Therefore, this paper reviews the LSPR fiber-optic sensors from the aspects of working principle, structure, and application fields in biosensors. According to the structure, the sensor can be divided into three categories: traditional ordinary optical fiber, special shape optical fiber, and specialty optical fiber. The advantages and disadvantages of existing and future LSPR fiber-optic biosensors are discussed in detail. Additionally, the prospect of future development of fiber-optic biosensors based on LSPR is addressed.

Plasmonic sensor based on offset-splicing and waist-expanded taper using multicore fiber for detection of Aflatoxins B1 in critical sectors

In this work, authors have developed a portable, sensitive, and quick-response fiber optic sensor that is capable of detection of Aflatoxins B1 (AFB1) quantitatively and qualitatively. Using multi-mode fiber (MMF) and multi-core fiber (MCF), the MMF-MCF-MCF-MMF fiber structure based on symmetric transverse offset splicing and waist-expanded taper is fabricated. The evanescent waves are enhanced to form a strong evanescent field by etching the fiber surface with hydrofluoric acid. To successfully excite the localized surface plasmon resonance phenomenon, gold nanoparticles are deposited on the optical fiber probe's surface. Further, to modify the fiber optic probes, Niobium carbide (Nb₂CT_x) MXene and AFB1 antibodies are functionalized. Nb₂CT_x MXene is employed to strengthen the biocompatibility of the sensor and increase the specific surface area of the fiber probe, while AFB1 antibody is used to identify AFB1 micro-biomolecules in a specific manner. The reproducibility, reusability, stability, and selectivity of the proposed fiber probe are tested and validated using various concentration of AFB1 solutions. Finally, the linear range, sensitivity, and limit of detection of the sensing probe are determined as 0 - 1000 nM, 11.7 nm/µM, and 26.41 nM, respectively. The sensor offers an indispensable technique, low-cost solution and portability for AFB1-specific detection in agricultural products and their byproducts with its novel optical fiber structure and superior detecting capability. It is also useful for marine species like fish and consequently affecting health of human body.

Optically Active Nanomaterials and Its Biosensing Applications-A Review

This article discusses optically active nanomaterials and their optical biosensing applications. In addition to enhancing their sensitivity, these nanomaterials also increase their biocompatibility. For this reason, nanomaterials, particularly those based on their chemical compositions, such as carbon-based nanomaterials, inorganic-based nanomaterials, organic-based nanomaterials, and composite-based nanomaterials for biosensing applications are investigated thoroughly. These nanomaterials are used extensively in the field of fiber optic biosensing to improve response time, detection limit, and nature of specificity. Consequently, this article describes contemporary and application-based research that will be of great use to researchers in the nanomaterial-based optical sensing field. The difficulties encountered during the synthesis, characterization, and application of nanomaterials are also enumerated, and their future prospects are outlined for the reader's benefit.

Novel Optical Fiber-Based Structures for Plasmonics Sensors

Optical fiber sensors based on surface plasma technology have many unique advantages in specific applications such as extreme environmental monitoring, physical parameter determination, and biomedical indicators testing. In recent decades, various kinds of fiber probes with special structures were developed according to special processing such as tapering, splicing, etching, fiber balls, grating etc. In this paper, the fabrication technology, characteristics, development status and application scenarios of different special optical fiber structures are briefly reviewed, including common processing equipment. Furthermore, many special novel optical fiber structures reported in recent years are summarized, which have been used in various kinds of plasmonic sensing work. Then, the fiber-plasmonic sensors for practical applications are also introduced and examined in detail. The main aim of this review is to provide guidance and inspiration for researchers to design and fabricate special optical fiber structures, thus facilitating their further research.

Advances in Novel Nanomaterial-Based Optical Fiber Biosensors-A Review

This article presents a concise summary of current advancements in novel nanomaterial-based optical fiber biosensors. The beneficial optical and biological properties of nanomaterials, such as nanoparticle size-dependent signal amplification, plasmon resonance, and charge-transfer capabilities, are widely used in biosensing applications. Due to the biocompatibility and bioreceptor combination, the nanomaterials enhance the sensitivity, limit of detection, specificity, and response time of sensing probes, as well as the signal-to-noise ratio of fiber optic biosensing platforms. This has established a practical method for improving the performance of fiber optic biosensors. With the aforementioned outstanding nanomaterial properties, the development of fiber optic biosensors has been efficiently promoted. This paper reviews the application of numerous novel nanomaterials in the field of optical fiber biosensing and provides a brief explanation of the fiber sensing mechanism.

Redox-labelled electrochemical aptasensors with nanosupported cancer cells

The transfer of redox-labelled bioelectrochemical sensors from proteins to cells is not straightforward because of the cell downward force issue on the surface of the sensors. In this paper, 20-nm-thick nanopillars are introduced to overcome this issue, in a well-controlled manner. We show on both molecular dynamics simulations and experiments that suspending cells a few nanometers above an electrode surface enables redox-labelled tethered DNA aptamer probes to move freely, while remaining at an interaction distance from a target membrane protein, i. e. epithelial cell adhesion molecule (EpCAM), which is typically overexpressed in cancer cells. By this nanopillar configuration, the interaction of aptamer with cancer cells is clearly observable, with 13 cells as the lower limit of detection. Nanoconfinement induced by the gap between the electrode surface and the cell membrane appears to improve the limit of detection and to lower the melting temperature of DNA aptamer hairpins, offering an additional degree of freedom to optimize molecular recognition mechanisms. This novel nanosupported electrochemical DNA cell sensor scheme including Brownian-fluctuating redox species opens new opportunities for the design of all-electrical sensors using redox-labelled probes.

Simultaneous detection of cancerous exosomal miRNA-21 and PD-L1 with a sensitive dual-cycling nanoprobe

Simultaneous detection of specific exosomal surface proteins and inner microRNAs are hampered by their heterogeneity, low abundance and spatial segregation in nanovesicles. Here, we design a dual-cycling nanoprobe (DCNP) to enable single-step simultaneous quantitation of cancerous exosomal surface programmed death-ligand 1 (PD-L1) (ExoPD-L1) and miRNA-21 (ExomiR-21) directly in exosome lysates, without resorting to either RNA extraction or time-consuming transmembrane penetration. In this design, DNA molecular machine-based dual-recognition probes co-assemble onto gold nanoparticle surface for engineering 'silent' DCNPs, which enable signal-amplified synchronous response to dual-targets as activated by ExomiR-21 and ExoPD-L1 within 20 min. Benefiting from cycling amplification of the molecular machine, DCNPs sensor achieves detection limits of tumor exosomes, ExoPD-L1 and ExomiR-21 down to 10 particles/μL, 0.17 pg/mL and 66 fM, respectively. Such a sensitive dual-response strategy allows simultaneous tracking the dynamic changes of ExoPD-L1 and ExomiR-21 expression regulated by signaling molecules or therapeutics. This approach further detects circulating ExoPD-L1 and ExomiR-21 in human plasma to differentiate breast cancer patients from healthy individuals with high accuracy, showing great potential of DCNPs for simultaneous profiling exosomal surface and inside biomarkers, and for clinical precision diagnosis.

Label-Free Differentiation of Cancer and Non-Cancer Cells Based on Machine-Learning-Algorithm-Assisted Fast Raman Imaging

This paper proposes a rapid, label-free, and non-invasive approach for identifying murine cancer cells (B16F10 melanoma cancer cells) from non-cancer cells (C2C12 muscle cells) using machine-learning-assisted Raman spectroscopic imaging. Through quick Raman spectroscopic imaging, a hyperspectral data processing approach based on machine learning methods proved capable of presenting the cell structure and distinguishing cancer cells from non-cancer muscle cells without compromising full-spectrum information. This study discovered that biomolecular information–nucleic acids, proteins, and lipids—from cells could be retrieved efficiently from low-quality hyperspectral Raman datasets and then employed for cell line differentiation.

Convex fiber-tapered seven core fiber-convex fiber (CTC) structure-based biosensor for creatinine detection in aquaculture

The purpose of this article is to propose an optical fiber sensor probe based on the localized surface plasma resonance (LSPR) technique for the detection of creatinine in aquaculture. The sensing probe is functionalized through the use of gold nanoparticles (AuNPs), niobium carbide (Nb₂CTx) MXene, and creatinase (CA) enzyme. The intrinsic total internal reflection (TIR) mechanism is modified to increase the evanescent field intensity using a heterogeneous core mismatch and tapering probe structure (i.e., convex fiber-tapered seven core fiber-convex fiber (CTC) structure). Strong evanescent fields can stimulate AuNPs and induce the LSPR effect, thereby increasing probe sensitivity. The specific recognition is enhanced by Nb₂CTx MXene adsorbing more active CA enzymes. The developed sensor probe has a sensitivity and limit of detection of 3.1 pm/µM and 86.12 µM, respectively, in the linear range of 0-2000 µM. Additionally, the sensor probe's reusability, reproducibility, stability, and selectivity were evaluated, with satisfactory results obtained with impact for areas like food protein, marine life and healthcare.

Label-free detection of breast cancer cells using a functionalized tilted fiber grating

The detection of circulating tumor cells (CTCs) still faces a huge challenge partially because of low abundance of CTCs (1-10 cells/mL). In this work, a plasmonic titled fiber Bragg grating biosensor is proposed for detection of breast cancer cells. The biosensor is made by an 18° TFBG with a 50 nm-thick gold nanofilm coating over the surface of the fiber, further immobilized with a specific antibody against GPR30, which is a membrane receptor expressed in many breast cancers, serving as bait. In vitro tests have confirmed that the proposed biosensor can detect breast cancer cells in concentration of 5 cells/mL within 20 minutes and has good linearity in the range of 5-1000 cells/mL, which has met the requirement of CTC detection in real conditions. Furthermore, theoretical analysis based on the experimental results shows that the limit of detection can even reach single-cell level. Our proposed biosensor has a simple structure, is easy to manufacture, is of small size, and has a good performance, making it a good choice for real-time, label-free, and milliliter-volume detection of cancer cells in future.

Efficient UV-visible emission enabled by 532 nm CW excitation in an Ho3+-doped ZBLAN fiber

Rare-earth-doped ZBLAN (ZrF₄-BaF₂-LaF₃-AlF₃-NaF) fibers have evolved to become promising candidates for efficient UV-visible emission because of their low phonon energy and low optical losses, as well as their well-defined absorption bands. We investigate the efficient emission of UV-visible light in a low-concentration (0.1 mol%) Ho³⁺-doped ZBLAN fiber excited by a 532 nm CW laser. In addition to the direct populating of the thermalized ⁵F₄+⁵S₂ levels by ground-state absorption, the upconversion processes responsible for UV-visible emission from the higher emitting levels, ³P₁+³D₃, ³K₇+⁵G₄, ⁵G₅, and ⁵F₃, of the Ho³⁺ ions are examined using excited-state absorption. The dependence of UV-visible fluorescence intensity on launched green pump power is experimentally determined, confirming the one-photon and two-photon characters of the observed processes. We theoretically investigate the excitation power dependence of the population density for nine Ho³⁺ levels based on a rate equation model. This qualitative model has shown a good agreement with the measured power dependence of UV-visible emission. Moreover, the emission cross-sections for blue, green, red, and deep-red light in the visible region are measured using the Füchtbauer-Ladenburg method and corroborated by McCumber theory, and the corresponding gain coefficients are derived. We propose an alternative approach to achieve efficient UV-visible emission in an Ho³⁺-doped ZBLAN fiber using a cost-effective, high-brightness 532 nm laser.

Optical fiber tip integrated photoelectrochemical sensors

In this work, we design and fabricate a compact photoelectrochemical (PEC) sensor by integrating a graphene-MoS₂ heterostructure on an optical fiber tip. The graphene serves as a transparent carrier transport layer, and the MoS₂ presents a photoelectrical transducer that generates photocarriers and interacts with ascorbic acid (AA) in solution. This device is used to demonstrate a self-powered detection of AA with a concentration range between 1 mM and 50 mM, and a time response of ∼ 6 ms. The device downsizes traditional PEC systems to the micrometer scale, benefiting the real-time monitoring of biochemical changes in small areas and opening the pathway for miniaturized PEC sensing applications.

Optical cytosensors for the detection of circulating tumour cells

Blood analysis is an established approach to monitor various diseases, ranging from heart defects and diabetes to cancer. Among various tumor markers in the blood, circulating tumor cells (CTCs) have received increasing attention due to the fact that they originate directly from the tumors. Capturing and detecting CTCs represents a promising approach in cancer diagnostics and clinical management of cancers. CTCs in blood progress to self-seeding a tumour or initiating a new lesion mass. Cytosensors are biosensors intended to identify CTCs in a blood sample of cancer patients and provide information about the cancer status. Herein, we firstly discuss different detection methods of state-of-the-art optical cytosensors, including colorimetry, fluorescence, surface plasmon resonance, photoelectrochemistry and electrochemiluminescence. Then we review the significant advances made in implementing biorecognition elements and nanomaterials for the detection of cancer cells. Despite great progress in optical cytosensors, and their integration with smartphones, they have still only been explored to prototype stages. Much more effort is needed to fulfil their potential in modern cancer diagnostics and in monitoring the state of disease for cancer patients.

Recent advancements in optical biosensors for cancer detection

Optical biosensors are rapid, real-time, and portable, have a low detection limit and a high sensitivity, and have a great potential for diagnosing various types of cancer. Optical biosensors can detect cancer in a few million malignant cells, in comparison to conventional diagnosis techniques that use 1 billion cells in tumor tissue with a diameter of 7 nm-10 nm. Current cancer detection methods are also costly, inconvenient, complex, time consuming, and require technical specialists. This review focuses on recent advances in optical biosensors for early detection of cancer. It is primarily concerned with advancements in the design of various biosensors using resonance, scattering, chemiluminescence, luminescence, interference, fluorescence, absorbance or reflectance, and various fiber types. The development of various two-dimensional materials with optical properties such as biocompatibility, field enhancement, and a higher surface-to-volume ratio, as well as advancements in microfabrication technologies, have accelerated the development of optical sensors for early detection of cancer and other diseases. Surface enhanced Raman spectroscopy technology has the potential to detect a single molecule with high specificity, and terahertz waves are a recently explored technology for cancer detection. Due to the low electromagnetic interference, small size, multiplexing, and remote sensing capabilities of optical fiber-based platforms, they may be a driving force behind the rapid development of biosensors. The advantages and disadvantages of existing and future optical biosensor designs for cancer detection are discussed in detail. Additionally, a prospect for future advancements in the development of optical biosensors for point-of-care and clinical applications is highlighted.

Cell membrane-coated nanoparticles as peroxidase mimetics for cancer cell targeted detection and therapy

The development of novel and efficient recognition molecules that can be easily modified by nanomaterials to achieve ultra-sensitive and specific cancer cell analysis is of great significance for its early diagnosis and timely prognosis. Herin, a new nanostructured hybrid based on cell membrane-coated Au cores- ultrathin Pt skins composite nanoparticles (Au@Pt@CM NPs) were developed for in vitro detection and treatment of cancer cells. In this strategy, the Au@Pt NPs acted as the signal transducer, and the cell membrane were used as the cancer-cell recognition tool. The synthesized Au@Pt@CM NPs could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of the hydrogen peroxide and were demonstrated to have excellent peroxidase-like activity. Coated with the source cancer cell membrane, the nanoparticles achieved highly specific self-recognition to the source cell. Therefore, the colorimetric method based on Au@Pt@CM NPs could detect the cancer cells in the linear range from 50 to 100000 cells/mL with a limit of detection of 5 cells/mL, which is much lower than other colorimetric detection methods. Afterwards, the nanoparticles as a mimetic enzyme were used for therapeutics of cancer cells through the ROS-mediated oxidative damage. Due to the change of the redox state in the cells by the Au@Pt@CM NPs, the hybrid can achieve the growth inhibitory effect and the selective killing effect on cancer cells. It can be expected that this novel hybrid membrane coating method will bring new insight into developing targeted nanomaterials for tumor treatment and detection.

Hybridized nanolayer modified Ω-shaped fiber-optic synergistically enhances localized surface plasma resonance for ultrasensitive cytosensor and efficient photothermal therapy

Inadequate sensitivity and side-effect are the main challenges to develop cytosensors combining with therapeutic potential simultaneously for cancer diagnosis and treatment. Herein, localized surface plasma resonance (LSPR) based on hybridized nanolayer modified Ω-shaped fiber-optic (HN/Ω-FO) was developed to integrate cytosensor and plasmonic photothermal treatment (PPT). On one hand, hybridized nanolayers improve the coverage of nanoparticles and refractive index sensitivity (RIS). Moreover, the hybridized nanoploymers of gold nanorods/gold nanoparticles (AuNRs/AuNPs) also result in intense enhancement in electronic field intensity (I). On the other hand, Ω-shaped fiber-optic (Ω-FO) led to strong bending loss in its bending part. To be specific, a majority of light escaped from fiber will interact with HN. Thus, HN/Ω-FO synergistically enhances the plasmonic, which achieved the goal of ultrasensitive cytosensor and highly-efficient plasmonic photothermal treatment (PPT). The proposed cytosensor exhibits ultrasensitivity for detection of cancer cells with a low limit of detection down to 2.6 cells/mL was realized just in 30 min. HN/Ω-FO-based LSPR exhibits unique characteristics of highly efficient, localized, and geometry-dependent heat distribution, which makes it suitable for PPT to only kill the cancer cells specifically on the surface or surrounding fiber-optic (FO) surface. Thus, HN/Ω-FO provides a new approach to couple cytosensor with PPT, indicating its great potential in clinical diagnosis and treatment.

A novel electrochemiluminescence aptasensor based on copper-gold bimetallic nanoparticles and its applications

In this work, a novel electrochemiluminescence (ECL) aptasensor was structured for the detection of four organophosphorus pesticides (OPs). Firstly, multi-walled carbon nanotubes (MWCNTs) were used to create a favorable loading interface for the fixation of tris (2, 2'-bipyridyl) ruthenium (II) (Ru (bpy)₃²⁺). At the same time, copper (core)-gold (shell) bimetallic nanoparticles (Cu@Au NPs) were synthesized in the aqueous phase for the sensor construction. Gold nanoparticles (Au NPs) could promote the electrochemiluminescence intensity of Ru (bpy)₃²⁺ with high efficiency by catalyzing the oxidation process of tri-n-propylamine (TPrA). Compared with the Au NPs, Cu@Au NPs increased the solid loading of Au NPs by virtue of the large specific surface area of copper nanoparticles (Cu NPs), which could further improve the sensitivity of aptasensor. When OPs were added, the ECL intensity was significantly reduced, and the concentration of OPs could be detected through the ECL intensity. Under the optimum conditions, the aptasensor had a wider dynamic range and ultra-low detection limit for the detection of four pesticides: profenofos, isocarbophos, phorate, and omethoate, and their detection limits were 3 × 10^-4 ng/mL, 3 × 10^-4 ng/mL, 3 × 10^-3 ng/mL, and 3 × 10^-2 ng/mL respectively (S/N = 3). The aptasensor had the merits of good stability, reproducibility, and specificity, and had a favorable recovery rate in detecting OPs residues in vegetables. This work provided an effective method for the construction of a simple, rapid, and sensitive biosensor.

Advances in electrochemical and optical sensing techniques for vitamins detection: a review

Vitamins are essential nutrients that aid in metabolism, cell growth, and the appropriate functioning of other biomolecules. They are required for the proper functioning of various systems in human body. Both vitamin shortage and excess can pave the way for a variety of illnesses. They enter the body via food and supplements eaten, making it critical to measure the vitamin concentrations in food, medicines, and biological fluids. The concentrations of these vitamins are determined using a variety of techniques. The performance measure of the techniques like selectivity, sensitivity, and limit of detection is crucial in their utilization. Among the many techniques of determination, electrochemical sensing and optical sensing have garnered widespread interest because of their potential to improve performance. Additionally, the introduction of innovative materials has added a lot of benefits to sensing. The aim of this article is to summarize significant work toward recent improvements in electrochemical and optical methods for detecting different vitamins. Additionally, it attempts to assess the gaps in vitamin sensing in order to encourage researchers to fill such gaps that will benefit the community.

2D material assisted SMF-MCF-MMF-SMF based LSPR sensor for creatinine detection

The purpose of this work is to propose a simple, portable, and sensitive biosensor structure based on singlemode fiber-multicore fiber-multimode fiber-singlemode fiber (SMF-MCF-MMF-SMF) for the detection of creatinine in the human body. Chemical etching has been used to modify the diameter of the sensing probe to approximately 90 μm in order to generate strong evanescent waves (EWs). The sensor probe is functionalized with graphene oxide (GO), gold nanoparticles (AuNPs), molybdenum disulfide nanoparticles (MoS₂-NPs), and creatininase (CA) enzyme. The concentration of creatinine is determined using fiber optic localized surface plasmon resonance (LSPR). While EWs are used to enhance the LSPR effect of AuNPs, two-dimensional (2D) materials (GO and MoS₂-NPs) are used to increase biocompatibility, and CA is used to increase probe specificity. Additionally, HR-TEM and UV-visible spectroscopy are used to characterize and measure the nanoparticle (NP) morphology and absorption spectrum, respectively. SEM is used to characterize the NPs immobilized on the surface of the fiber probe. The sensor probe's reusability, reproducibility, stability, selectivity, and pH test results are also tested to verify the sensor performance. The sensitivity of proposed sensor is 0.0025 nm/μM, has a standard deviation of 0.107, and has a limit of detection of 128.4 μM over a linear detection range of 0 - 2000 μM.

Water Pollutants p-Cresol Detection Based on Au-ZnO Nanoparticles Modified Tapered Optical Fiber

In this work, a localized plasmon-based sensor is developed for para-cresol (p-cresol) - a water pollutant detection. A nonadiabatic [Formula: see text] of tapered optical fiber (TOF) has been experimentally fabricated and computationally analyzed using beam propagation method. For optimization of sensor's performance, two probes are proposed, where probe 1 is immobilized with gold nanoparticles (AuNPs) and probe 2 is immobilized with the AuNPs along with zinc oxide nanoparticles (ZnO-NPs). The synthesized metal nanomaterials were characterized by ultraviolet-visible spectrophotometer (UV-vis spectrophotometer) and transmission electron microscope (HR-TEM). The nanomaterials coating on the surface of the sensing probe were characterized by a scanning electron microscope (SEM). Thereafter, to increase the specificity of the sensor, the probes are functionalized with tyrosinase enzyme. Different solutions of p-cresol in the concentration range of [Formula: see text] - [Formula: see text] are prepared in an artificial urine solution for sensing purposes. Different analytes such as uric acid, β -cyclodextrin, L-alanine, and glycine are prepared for selectivity measurement. The linearity range, sensitivity, and limit of detection (LOD) of probe 1 are [Formula: see text] - [Formula: see text], 7.2 nm/mM (accuracy 0.977), and [Formula: see text], respectively; and for probe 2 are [Formula: see text] - [Formula: see text], 5.6 nm/mM (accuracy 0.981), and [Formula: see text], respectively. Thus, the overall performance of probe 2 is quite better due to the inclusion of ZnO-NPs that increase the biocompatibility of sensor probe. The proposed sensor structure has potential applications in the food industry and clinical medicine.

Improved adenylate cyclase activity via affinity immobilization onto co-modified GO with bio-inspired adhesive and PEI

Adenylate cyclase (AC) can efficiently catalyze the conversion of adenosine triphosphate (ATP) to cyclic adenosine-3', 5'-monophosphate (cAMP). However, AC directly immobilized on substrate is not desirable due to enzyme inactivation. Herein, bio-inspired adhesive of polydopamine and polyethyleneimine (PDA/PEI) was used as flexible chains to graft on graphene oxide (GO), and the AC was directionally immobilized through affinity between metal ions and his-tags of AC. The properties of modified GO and the activity of immobilized AC were studied in detail. PDA/PEI layers have been proved to improve the amino density of GO surface for affinity groups decoration and adjust the interaction between AC and support. And modified GO by this novel method contributes to subsequent grafting and immobilization of AC by affinity. AC immobilized on modified GO exhibited high activity recovery with about 90 % of free AC, while enzyme immobilized on unmodified GO has been inactivated. This study offers a versatile approach for support modification and enzyme oriented immobilization. PDA/PEI functionalized GO can be used as a promising carrier to immobilize other his-tagged enzymes.

Random forest assisted vector displacement sensor based on a multicore fiber

We proposed a two-dimensional vector displacement sensor with the capability of distinguishing the direction and amplitude of the displacement simultaneously, with improved performance assisted by random forest, a powerful machine learning algorithm. The sensor was designed based on a seven-core multi-core fiber inscribed with Bragg gratings, with a displacement direction range of 0-360° and the amplitude range related to the length of the sensor body. The displacement information was obtained under a random circumstance, where the performances with theoretical model and random forest model were studied. With the theoretical model, the sensor performed well over a shorter linear range (from 0 to 9 mm). Whereas the sensor assisted with random forest algorithm exhibits better performance in two aspects, a wider measurement range (from 0 to 45 mm) and a reduced measurement error of displacement. Mean absolute errors of direction and amplitude reconstruction were decreased by 60% and 98%, respectively. The proposed displacement sensor shows the possibility of machine learning methods to be applied in point-based optical systems for multi-parameter sensing.

Biosensing Applications Using Nanostructure-Based Localized Surface Plasmon Resonance Sensors

Localized surface plasmon resonance (LSPR)-based biosensors have recently garnered increasing attention due to their potential to allow label-free, portable, low-cost, and real-time monitoring of diverse analytes. Recent developments in this technology have focused on biochemical markers in clinical and environmental settings coupled with advances in nanostructure technology. Therefore, this review focuses on the recent advances in LSPR-based biosensor technology for the detection of diverse chemicals and biomolecules. Moreover, we also provide recent examples of sensing strategies based on diverse nanostructure platforms, in addition to their advantages and limitations. Finally, this review discusses potential strategies for the development of biosensors with enhanced sensing performance.

Cancer cell detection by a heart-shaped dual-core photonic crystal fiber sensor

This paper contributes a novel design of sensor with a heart-shaped dual-core photonic crystal fiber (PCF) to detect cancerous cells in human cervical, blood, adrenal glands, and breast. Cancer-infected cells and their normal cells are considered in liquid form having their own refractive indices. In the designed PCF, the two heart-shaped cores separated by a large circular air hole serve as two independent waveguides. The large circular air hole is infiltrated by sample cells from different body parts. Detection of cancer-contaminated cells by the proposed PCF is based on the mode-coupling theory. According to the mode-coupling theory, the guided optical light transmits periodically from one core to another, throughout the PCF length. During this transmission, the optical light interacts with the cancerous cell, which is filled in the center air hole of the PCF. Due to this interaction, the dip wavelength of the transmission spectrum is sensitive to the corresponding cancerous cell filled in the center air hole of the PCF. The variation in the PCF transmission spectrum for cancerous cells and their normal cells is observed by using the finite element method. The dip wavelength shift of the cancer cell in reference to its normal cell has been measured from the transmission spectrum to determine the sensing performance of the proposed sensor. The sensitivity achieved of the proposed sensor for cervical cancer cell, blood cancer cell, adrenal gland cancer cell, and breast cancer cells are 7916.67 nm/RIU, 8571.43 nm/RIU, 9285.71 nm/RIU, and 10,000 nm/RIU, respectively, with a maximum detection limit of 0.024. Therefore, the proposed PCF sensor suggests high sensitivity with a rapid cancer detection mechanism.