TiO2-sensitized double-shell ZnCdS hollow nanospheres for photoelectrochemical immunoassay of carcinoembryonic antigen coupled with hybridization chain reaction-dependent Cu2+ quenching

Realizing the label-free sensitive detection of carcinoembryogenic antigen (CEA) in blood serum via a MNC-decorated flexible immunosensor

A label-free electrochemical immunosensor utilising nitrogen-rich mesoporous carbon (MNC) as the substrate material was developed for the sensitive quantification of carcinoembryonic antigen (CEA). The synergic interactions between MNC and AbCEA also eliminated the need for coupling agents such as EDC/NHS. The novel immunosensor demonstrated a wide detection range from 500 fM (9.04 pg mL-1) to 50 nM (1 μg mL-1) and a low detection limit (LOD) of 500 fM. Moreover, the immunosensor showed sensitivities of 12.27 mA nM-1 cm-2 and 0.066 mA nM-1 cm-2 for detecting CEA in the linear ranges 10 pM to 1 nM and 2 nM to 50 nM, respectively, while maintaining long-term storage stability of 6 weeks. Analysis of real serum sample analysis yielded highly accurate results with recovery rates ranging from 99.3% to 103.7%. Furthermore, the developed paper-based screen-printed electrode exhibited a similar detection range, suggesting its potential for use in point-of-care detection devices in future applications.

Construction of a novel nano-enzyme for ultrasensitive glucose detection with surface-enhanced Raman scattering

Fabricating more sensitive, stable and low-cost nanomaterials for the detection of glucose is important for the disease diagnosis and monitoring. Herein, we established a nanocomposite (polypyrrole bridging GO@Au@MnO₂) as a novel surface-enhanced Raman scattering (SERS) nanoprobe for the quantitative detection of glucose in trace serum. Each component in the nanocomposites played an irreplaceable role in SERS detection of glucose. Polypyrrole (PPy) could act as Raman signal and extra SERS signal molecules didn't need to be introduced; Graphene oxide (GO) and gold nanoparticles (Au NPs) could enhance Raman signal of PPy; Au NPs also acted as glucose oxidase, which can oxidize glucose to produce gluconic acid and hydrogen peroxide(H₂O₂); Manganese oxide (MnO₂) further enhanced Raman signal of PPy and responded to hydrogen peroxide, which will induce the decrease of Raman intensity of PPy. Thus, glucose can be quantified according to Raman signal output of PPy, which displayed a liner range from 1 to 10 μM, with detectable limit of 0.114 μM. Because of the merits in sensitivity, convenience and versatility, the novel method shows large potential space for disease-related substance detection in the future.

CdTe QDs-sensitized TiO2 nanocomposite for magnetic-assisted photoelectrochemical immunoassay of SARS-CoV-2 nucleocapsid protein

A sensitive, reliable, and cost-effective detection for SARS-CoV-2 was urgently needed due to the rapid spread of COVID-19. Here, a "signal-on" magnetic-assisted PEC immunosensor was constructed for the quantitative detection of SARS-CoV-2 nucleocapsid (N) protein based on Z-scheme heterojunction. Fe₃O₄@SiO₂@Au was used to connect the capture antibody to act as a capture probe (Fe₃O₄@SiO₂@Au/Ab₁). It can extract target analytes selectively in complex samples and multiple electrode rinsing and assembly steps were avoided effectively. CdTe QDs sensitized TiO₂ coated on the surface of SiO₂ spheres to form Z-scheme heterojunction (SiO₂@TiO₂@CdTe QDs), which broadened the optical absorption range and inhibited the quick recombination of photogenerated electron/hole of the composite. With fascinating photoelectric conversion performance, SiO₂@TiO₂@CdTe QDs were utilized as a signal label, thus further realizing signal amplification. The migration mechanism of photogenerated electrons was further deduced by active material quenching experiment and electron spin resonance (ESR) measurement. The elaborated immunosensor can detect SARS-CoV-2 N protein in the linear range of 0.005-50 ng mL^-1 with a low detection limit of 1.8 pg mL^-1 (S/N = 3). The immunosensor displays extraordinary sensitivity, strong anti-interference, and high reproducibility in detecting SARS-CoV-2 N protein, which envisages its potential application in the clinical diagnosis of COVID-19.

CdSe/ZnS QDs embedded polyethersulfone fluorescence composite membrane for sensitive detection of copper ions in various drinks

The copper ion was detected rapidly by a novel sensing membrane in this paper for its damage to health and the environment. CdSe/ZnS QDs modified polyethersulfone membrane (QDs@PESM) was made by phase-inversion method using a membrane separation technique and quantum dots (QDs). When the sample passed through the membrane, the copper ions in the sample caused the membrane's fluorescence to be quenched. The fluorescence quenching value of the membrane is used to calculate the concentration of copper ions. With R²= 0.9964, Cu²⁺could be quantitatively detected over a wide concentration range (10-1000 μg/L). The method's LOD and LOQ were 4.27 and 14.23 μg/L, respectively. When the CdSe/ZnS QDs@PESM was used to analyze Cu²⁺ in various real drinks, including well water, baijiu, orange juice, beer, and milk, the recovery ranged from 79.1 to 123.9%, indicating that the CdSe/ZnS QDs@PESM can be used as a rapid, simple and reliable method to determine Cu²⁺ in various matrices.

2D carbon materials based photoelectrochemical biosensors for detection of cancer antigens

Cancer is a leading cause of death globally and early diagnosis is of paramount importance for identifying appropriate treatment pathways to improve cancer patient survival. However, conventional methods for cancer detection such as biopsy, CT scan, magnetic resonance imaging, endoscopy, X-ray and ultrasound are limited and not efficient for early cancer detection. Advancements in molecular technology have enabled the identification of various cancer biomarkers for diagnosis and prognosis of the deadly disease. The detection of these biomarkers can be done by biosensors. Biosensors are less time consuming compared to conventional methods and has the potential to detect cancer at an earlier stage. Compared to conventional biosensors, photoelectrochemical (PEC) biosensors have improved selectivity and sensitivity and is a suitable tool for detecting cancer agents. Recently, 2D carbon materials have gained interest as a PEC sensing platform due to their high surface area and ease of surface modifications for improved electrical transfer and attachment of biorecognition elements. This review will focus on the development of 2D carbon nanomaterials as electrode platform in PEC biosensors for the detection of cancer biomarkers. The working principles, biorecognition strategies and key parameters that influence the performance of the biosensors will be critically discussed. In addition, the potential application of PEC biosensor in clinical settings will also be explored, providing insights into the future perspective and challenges of exploiting PEC biosensors for cancer diagnosis.

Competitive Displacement Triggering DBP Photoelectrochemical Aptasensor via Cetyltrimethylammonium Bromide Bridging Aptamer and Perovskite

Here, a label-free perovskite-based photoelectrochemical (PEC) aptasensor was rationally designed for the displacement assay of dibutyl phthalate (DBP), a well-known endocrine disruptor, with the aid of cetyltrimethylammonium bromide (CTAB). In this method, CTAB significantly enhanced the PEC response and humidity resistance of the CH₃NH₃PbI₃ perovskite by forming a protecting layer and passivating the X- and A-sites vacancies of CH₃NH₃PbI₃. In addition, CTAB facilitated the immobilization of an aptamer through van der Waals and hydrophobicity forces, as well as the electrostatic interactions between the phosphate group of the aptamer and the cationic group of CTAB. When exposed to DBP in the affinity solution, the DBP aptamer was released from the electrode because the affinity between DBP and its aptamer competes with the interaction of the aptamer and CTAB. The displacement of the aptamer from the perovskite surface relieves the block effect and thus enhances the photoelectric signal of perovskite. By virtue of the good photoelectrochemical characters of CH₃NH₃PbI₃ and the specific recognition ability of aptamer, the linear range of the PEC sensor was 1.0 × 10^-13 to 1.0 × 10^-8 M and the detection and quantification limits were down to 2.5 × 10^-14 and 8.2 × 10^-14 M (S/N = 3), respectively. This work offers a novel strategy for designing aptasensors for the detection of various targets and exhibits the marvelous potential of organic-inorganic perovskite in the field of PEC analysis.

Traditional and new applications of the HCR in biosensing and biomedicine

The hybridization chain reaction is a very popular isothermal nucleic acid amplification technology. A single-stranded DNA initiator triggers an alternate hybridization event between two hairpins forming a double helix polymer. Due to isothermal, enzyme-free and high amplification efficiency characteristics, the HCR is often used as a signal amplification technology for various biosensing and biomedicine fields. However, as an enzyme-free self-assembly reaction, it has some inevitable shortcomings of relatively slow kinetics, low cell internalization efficiency, weak biostability of DNA probes and uncontrollable reaction in these applications. More and more researchers use this reaction system to synthesize new materials. New materials can avoid these problems skillfully by virtue of their inherent biological characteristics, molecular recognition ability, sequence programmability and biocompatibility. Here, we summarized the traditional application of the HCR in biosensing and biomedicine in recent years, and also introduced its new application in the synthesis of new materials for biosensing and biomedicine. Finally, we summarized the development and challenges of the HCR in biosensing and biomedicine in recent years. We hope to give readers some enlightenment and help.

Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people's increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

High-sensitivity photo-electrochemical heterostructure of the cuprous oxide-metal organic framework for a dioctyl phthalate molecularly imprinted sensor

This work designed a novel dioctyl phthalate (DOP) photoelectrochemical (PEC) sensor based on a molecularly imprinted polymer (MIP) modified Cu₃(BTC)₂@Cu₂O heterostructure. In this work, a metal organic framework (MOF), Cu₃(BTC)₂, was coated on Cu₂O through a simple immersion method to form a Cu₃(BTC)₂@Cu₂O heterostructure. The heterostructure exhibited strong light adsorption ability, good stability and enhanced photocurrent under visible light irradiation. Using the Cu₃(BTC)₂@Cu₂O heterostructure as the photoelectric converter, a PEC sensor was constructed by imprinting DOP on the heterostructure. Under the optimal experimental conditions, the PEC sensor showed a wide linear range from 25.0 pM-0.1 μM and a low detection limit of 9.15 pM. This method with good sensitivity, stability, selectivity and reproducibility in actual sample analyses showed promising applications of the MOF-based heterostructure in photoelectrochemical analysis fields.