DNA walker-mediated biosensor for target-triggered triple-mode detection of Vibrio parahaemolyticus

Biosensor in smart food traceability system for food safety and security

The burden of food contamination and food wastage has significantly contributed to the increased prevalence of foodborne disease and food insecurity all over the world. Due to this, there is an urgent need to develop a smarter food traceability system. Recent advancements in biosensors that are easy-to-use, rapid yet selective, sensitive, and cost-effective have shown great promise to meet the critical demand for onsite and immediate diagnosis and treatment of food safety and quality control (i.e. point-of-care technology). This review article focuses on the recent development of different biosensors for food safety and quality monitoring. In general, the application of biosensors in agriculture (i.e. pre-harvest stage) for early detection and routine control of plant infections or stress is discussed. Afterward, a more detailed advancement of biosensors in the past five years within the food supply chain (i.e. post-harvest stage) to detect different types of food contaminants and smart food packaging is highlighted. A section that discusses perspectives for the development of biosensors in the future is also mentioned.

High-Sensitivity Homogeneous Detection of miRNA-155 Governed by DNA Walker-Regulated Surface DNA Density of Magnetic Electrochemiluminescence Nanoparticles

Homogeneous electrochemiluminescence (ECL) has gained attention for its simplicity and stability. However, false positives due to solution background interference pose a challenge. To address this, magnetic ECL nanoparticles (Fe3O4@Ru@SiO2 NPs) were synthesized, offering easy modification, magnetic separation, and stable luminescence. These were utilized in an ECL sensor for miRNA-155 (miR-155) detection, with locked DNAzyme and substrate chain (mDNA) modified on their surface. The poor conductivity of long-chain DNA significantly impacts the conductivity and electron transfer capability of Fe3O4@Ru@SiO2 NPs, resulting in weaker ECL signals. Upon target presence, unlocked DNAzyme catalyzes mDNA cleavage, leading to shortened DNA chains and reduced density. In contrast, the presence of short-chain DNA has minimal impact on the conductivity and electron transfer capability of Fe3O4@Ru@SiO2 NPs. Simultaneously, the material surface's electronegativity decreases, weakening the electrostatic repulsion with the negatively charged electrode, resulting in the system detecting stronger ECL signals. This sensor enables homogeneous ECL detection while mitigating solution background interference through magnetic separation. Within a range of 100 fM to 10 nM, the sensor exhibits a linear relationship between ECL intensity and target concentration, with a 26.91 fM detection limit. It demonstrates high accuracy in clinical sample detection, holding significant potential for clinical diagnostics. Future integration with innovative detection strategies may further enhance sensitivity and specificity in biosensing applications.

Biomedical Utility of Non-Enzymatic DNA Amplification Reaction: From Material Design to Diagnosis and Treatment

Nucleic acid nanotechnology has become a promising strategy for disease diagnosis and treatment, owing to remarkable programmability, precision, and biocompatibility. However, current biosensing and biotherapy approaches by nucleic acids exhibit limitations in sensitivity, specificity, versatility, and real-time monitoring. DNA amplification reactions present an advantageous strategy to enhance the performance of biosensing and biotherapy platforms. Non-enzymatic DNA amplification reaction (NEDAR), such as hybridization chain reaction and catalytic hairpin assembly, operate via strand displacement. NEDAR presents distinct advantages over traditional enzymatic DNA amplification reactions, including simplified procedures, milder reaction conditions, higher specificity, enhanced controllability, and excellent versatility. Consequently, research focusing on NEDAR-based biosensing and biotherapy has garnered significant attention. NEDAR demonstrates high efficacy in detecting multiple types of biomarkers, including nucleic acids, small molecules, and proteins, with high sensitivity and specificity, enabling the parallel detection of multiple targets. Besides, NEDAR can strengthen drug therapy, cellular behavior control, and cell encapsulation. Moreover, NEDAR holds promise for constructing assembled diagnosis-treatment nanoplatforms in the forms of pure DNA nanostructures and hybrid nanomaterials, which offer utility in disease monitoring and precise treatment. Thus, this paper aims to comprehensively elucidate the reaction mechanism of NEDAR and review the substantial advancements in NEDAR-based diagnosis and treatment over the past five years, encompassing NEDAR-based design strategies, applications, and prospects.

Colorimetry/fluorescence dual-mode detection of Salmonella typhimurium based on a "three-in-one" nanohybrid with high oxidase-like activity for AIEgen

A colorimetry/fluorescence dual-mode assay based on the aptamer-functionalized magnetic covalent organic framework-supported CuO and Au NPs (MCOF-CuO/Au@apt) was developed for Salmonella typhimurium (S. typhimurium) biosensing. The nanohybrid combined three functions in one: good magnetic separation characteristic, excellent oxidase-mimic activity for tetrap-aminophenylethylene (TPE-4A), and target recognition capability. The attachment of MCOF-CuO/Au@apt onto the surface of S. typhimurium resulted in a significant reduction in the oxidase-mimicking activity of the nanohybrid, which could generate dual-signal of colorimetry and fluorescence through the catalytic oxidation of TPE-4A. Based on this, S. typhimurium could be specifically detected in the linear ranges of 102- 106 CFU·mL-1 and 101- 106 CFU·mL-1, with LODs of 7.6 and 2.1 CFU·mL-1, respectively in colorimetry/fluorescence modes. Moreover, the smartphone and linear discrimination analysis-based system could be used for on-site and portable testing. In addition, this platform showed applicability in detecting S. typhimurium in milk, egg liquid and chicken samples.

A novel biosensing strategy on the dynamic and on-site detection of Vibrio coralliilyticus eDNA for coral health warnings

Heat stress and coral diseases are the predominant factors causing the degradation of coral reef ecosystems. Over recent years, Vibrio coralliilyticus was identified as a temperature-dependent pathogen causing tissue lysis in Pocillopora damicornis and one of the primary pathogens causing bleaching and mortality in other corals. Yet current detection techniques for V. coralliilyticus rely primarily on qPCR and ddPCR, which cannot meet the requirements for non-invasive and real-time detection. Herein, we developed an effective electrochemical biosensor modified by an Au-MoS2/rGO (AMG) nanocomposites and a specific capture probe to dynamically detect V. coralliilyticus environment DNA (eDNA) in aquarium experiments, with a lower limit of detection (0.28 fM) for synthetic DNA and a lower limit of quantification (9.8 fg/µL, ∼0.86 copies/µL) for genomic DNA. Its reliability and accuracy were verified by comparison with the ddPCR method (P > 0.05). Notably, coral tissue started to lyse at only 29 °C when the concentration of V. coralliilyticus increased abruptly to 880 copies/µL, indicating the biosensor could reflect the types of pathogen and health risks of corals under heat stress. Overall, the novel and reliable electrochemical biosensing technology provides an efficient strategy for the on-site monitoring and early warning of coral health in the context of global warming.

A Piezoelectric Nanogenerator-Driven Dual-Mode Platform for Visualization and Impedance Sensing

Traditional visual biosensing platforms rely on color to display detection results, which can be influenced by individual visual abilities, equipment, parameters, and lighting conditions during photo capture. This limitation significantly impedes the advancement of next-generation portable electrochemical biosensors. Therefore, we propose a visual biosensing device that utilizes distance as an indicator, enabling the facile determination of the length of discoloration, which is inversely proportional to the concentration of the target analyte. The separation of the Signal Generation (SG) and Signal Output (SO) regions effectively mitigates potential interference from the sample color. Additionally, the SG region can be disassembled to facilitate electrochemical impedance spectroscopy (EIS) detection in laboratory settings, enabling dual-mode detection. Meanwhile, the utilization of piezoelectric nanogenerators (PENG) empowers the entire point-of-care testing (POCT) sensing device, effectively addressing the issue of a limited battery life. The biosensing device exhibited a satisfactory linear range (EIS mode, 5 pg/L to 5 mg/L; visual mode, 0.5 ng/L to 5 mg/L) and a low limit of detection (EIS mode, 2.3 pg/L; visual mode, 0.14 ng/L) with S/N = 3 for ochratoxin A (OTA) under optimized conditions. The self-powered and cost-effective dual-mode biosensing platform developed for OTA detection offers clear and easily interpretable results, demonstrating a high accuracy in laboratory settings.

Research progress on the detection of foodborne pathogens based on aptamer recognition

Foodborne diseases caused by bacterial contamination are a serious threat to food safety and human health. The classical plate culture method has the problems of long detection cycle, low sensitivity and specificity, and complicated operation, which cannot meet the growing demand for rapid quantitative detection of pathogenic bacteria. The frequent outbreak of foodborne diseases has put forward higher requirements for rapid and simple detection technology of foodborne pathogens. Aptamer is a kind of oligonucleotide fragment that can recognize targets with the advantages of high affinity and good specificity. The target can be range from proteins, small molecules, cells bacteria, and even viruses. Herein, the latest advances in sensitive and rapid detection of foodborne pathogens based on aptamer recognition was reviewed. Special attention has been paid to the obtained sequences of aptamers to various foodborne pathogens, the optimization of sequences, and the mechanism of aptamer recognition. Then, the research progress of biosensors for the detection of pathogenic bacteria based on aptamer recognition were summarized. Some challenges and prospects for the detection of foodborne pathogens based on aptamer recognition were prospected. In summary, with the further deepening of aptamer research and improvement of detection technology, aptamer-based recognition can meet the needs of rapid, sensitive, and accurate detection in practical applications.

Colorimetry/fluorescence dual-mode detection of Salmonella typhimurium based on self-assembly of MCOF with Au NPs nanozyme coupled AIEgen

Sensitive, accurate, simple and quick monitoring of Salmonella typhimurium (S. typhimurium) in food is significant for preventing food poisoning, but still remains a challenge. Herein, a colorimetry/fluorescence dual-mode sensing strategy was fabricated to detect S. typhimurium by integrating the self-assembly of magnetic covalent organic framework (MCOF) with gold nanoparticles (Au NPs) as the peroxidase-mimicking nanozyme and aggregation-induced emission luminogen (AIEgen). S. typhimurium could competitive bind to aptamer conjugated Au NPs (Au NPs@apt), inhibit the self-assembly of MCOF with Au NPs, and shield the catalytic activity of AuNPs. After adding H2O2 and TPE-4A, the dark green solution changed to light with increasing S. typhimurium concentration, on the contrary, the fluorescent signals were generated. As a result, in colorimetry/fluorescence modes, S. typhimurium could be detected in the linear ranges of 103-108 CFU mL-1 and 101-107 CFU mL-1, with LODs of 1000 and 10 CFU mL-1, respectively. Importantly, different colors consistent with various S. typhimurium concentrations can be accurately classified by smartphone app and linear discriminant analysis (LDA). The smartphone-assisted data interpretation can generate complementary colorimetry and fluorescence signals without any sophisticated equipment and achieve on-site detection. Moreover, the proposed strategy could be explored for S. typhimurium monitoring in milk with satisfactory recoveries (97.6-100.4 %) in colorimetry and fluorescence mode and good classification and prediction performance in smartphone/LDA system, suggesting the feasibility and potential applications of the sensing platform.

Well plate-based LF-NMR/colorimetric dual-mode homogeneous immunosensor for Vibrio parahaemolyticus detection

A 96-well plate-based low-field nuclear magnetic resonance (LF-NMR)/colorimetric dual-mode homogeneous immunosensor was developed for the detection of pathogen bacteria, using Vibrio parahaemolyticus (VP) as a detection template. The signal unit MNS@Ab2 is graphene oxide (GO) simultaneously loaded with VP antibody and Fe3O4 nanoparticles. A 96-well plate coated with VP antibody captures the target VP, which then binds the signal unit to form the immunocomplex. After acidolysed, Fe3O4 nanoparticles are transformed into Fe3+ and Fe2+, so the non-homogeneous system is transformed into a homogeneous one. The addition of KMnO4 can not only convert Fe2+ into Fe3+ but also provide Mn2+, improving the detection sensitivity. And, colorimetric analysis can be achieved by the quantitative reduction of KMnO4. Under the optimal experimental conditions, the limit of detection was 60 CFU/mL with good selectivity, stability, precision, accuracy, and consistency, providing a simple and reliable detection platform for pathogenic bacteria in food.

Recent advances in electrochemical aptasensors and genosensors for the detection of pathogens

In recent years, pathogenic microorganisms have caused significant mortality rates and antibiotic resistance and triggered exorbitant healthcare costs. These pathogens often have high transmission rates within human populations. Rapid diagnosis is crucial in controlling and reducing the spread of pathogenic infections. The diagnostic methods currently used against individuals infected with these pathogens include relying on outward symptoms, immunological-based and, some biomolecular ones, which mainly have limitations such as diagnostic errors, time-consuming processes, and high-cost platforms. Electrochemical aptasensors and genosensors have emerged as promising diagnostic tools for rapid, accurate, and cost-effective pathogen detection. These bio-electrochemical platforms have been optimized for diagnostic purposes by incorporating advanced materials (mainly nanomaterials), biomolecular technologies, and innovative designs. This review classifies electrochemical aptasensors and genosensors developed between 2021 and 2023 based on their use of different nanomaterials, such as gold-based, carbon-based, and others that employed other innovative assemblies without the use of nanomaterials. Inspecting the diagnostic features of various sensing platforms against pathogenic analytes can identify research gaps and open new avenues for exploration.

An LF-NMR homogeneous immunoassay for Vibrio parahaemolyticus based on superparamagnetic 2D nanomaterials

In this work, a sensitive low field nuclear magnetic resonance (LF-NMR) homogeneous immunoassay, also called magnetic resonance switch (MRSw) sensor, for Vibrio parahaemolyticus (VP) was developed. Superparamagnetic 2D nanomaterial was designed and used as the magnetic probe of MRSw sensor. It was GO@SPIONs&Ab, a composite nanomaterial with many superparamagnetic Fe3O4 nanoparticles (SPIONs) providing a magnetic signal and VP antibody (Ab) specifically recognizing the target VP evenly distributed on the surface of GO. The presence of VP controllably changed the aggregation state of the probe, eliminating the uncertainty of MRSw sensor type, and thus then achieving a regular variation of transverse relaxation time T2 and ensuing quantitative detection of VP. Triple signal enhancement of the MRSw sensor was obtained due to the application of the designed 2D probe, by increasing the number of SPIONs, improving the magnetic intensity and susceptibility, and forming a synergistic effect. Under optimized experimental conditions, VP could be detected with satisfied sensitivity, selectivity, precision, accuracy, and stability, even in turbid real samples. LOQ for VP was 10 CFU/mL. This detection principle is widely applicable, providing an idea for the construction of highly sensitive MRSw sensors.

New insights into the on-site monitoring of probiotics eDNA using biosensing technology for heat-stress relieving in coral reefs

Coral probiotics can improve the tolerance of corals to heat stress, thus mitigating the process of coral thermal bleaching. Sensitive and specific detection of coral probiotics at low abundances is highly desirable but remains challenging, especially for rapid and on-site detection of coral probiotics. Since the electrochemical biosensor has been recently used in the field of environmental DNA (eDNA) detection, herein, an efficient electrochemical biosensor was developed based on CoS2/CoSe2-NC HNCs electrode material with a specific DNA probe for the C. marina detection. After optimization, the lower limit of detection (LOD) values of such biosensors for the target DNA and genomic DNA were 1.58 fM and 6.5 pM, respectively. On this basis, a portable device was constructed for the practical detection of C. marina eDNA, and its reliability and accuracy were verified by comparison with the ddPCR method (P > 0.05). For each analysis, the average cost was only ∼ $1.08 and could be completed within 100 min with reliable sensitivity and specificity. Overall, the biosensor could reflect the protective effect of probiotics on coral heat stress, and the proposed technique will put new insights into the rapid and on-site detection of coral probiotics to assist corals against global warming.

Engineering of an adaptive tandem CRISPR/Cas12a molecular amplifier permits robust analysis of Vibrio parahaemolyticus

Seeking new molecular diagnostic method for pathogenic bacteria detection is of utmost importance for ensuring food safety and protecting human health. Herein, we have engineered an adaptive tandem CRISPR/Cas12a molecular amplifier specifically designed for robust analysis of vibrio parahaemolyticus (V. parahaemolyticus), one of the most harmful pathogens. Our strategy involves the integration of three crucial processes: recombinase polymerase amplification (RPA) for copy number amplification, terminal deoxynucleotidyl transferase (TdT) for template-free strand elongation, and CRISPR/Cas12a-mediated trans-cleavage of a reporter molecule. By combining these processes, the target genomic DNA extracted from V. parahaemolyticus is able to activate many CRISPR/Cas12a units (CRISPR/Cas12an) simultaneously, resulting in a greatly amplified target signal to indicate the presence and concentration of V. parahaemolyticus. This unique model offers more advantages compared to traditional amplification models that use one RPA amplicon to activate one CRISPR/Cas12a unit. Under optimized conditions, our method enables the detection of target V. parahaemolyticus within a linear range of 1 × 102-1 × 107 CFU/mL, with an impressive limit of detection as low as 12.4 CFU/mL. It is conceivable that the adaptive tandem CRISPR/Cas12a molecular amplifier could be adapted as routine diagnostic kits in future for in-field detection of pathogens.

Dual-signal and one-step monitoring of Staphylococcus aureus in milk using hybridization chain reaction based fluorescent sensor

Food-borne pathogens in dairy products that was contaminated from raw ingredients or improper food handling can cause a major threaten to human health. Here, to construct the pathogens detection, a dual-signal readout fluorescent switching sensor was designed for one-step determination of Staphylococcus aureus (S. aureus), which was a marker of food contamination. Graphene oxide (GO) was used as a fluorescence quencher, while fluorophore-labeled hairpin DNA was used as a donor, resulting in fluorescence resonance energy transfer (FRET) from the fluorophore to GO (signal off). Enzyme-free hybridization chain reaction could generate remarkable signal amplification, which avoided the nonspecific desorption caused by any enzymatic proteins in GO surface. With the strong binding ability of aptamer to S. aureus, a long bifluorescent molecules-labeled double-stranded DNA product was formed, bringing in dual-signal readout responses (signal on). Consequently, a reliable, sensitive and selective sensor was obtained for one-step quantification of S. aureus concentration from 10 to 108 CFU/mL with a detection limit of 1 CFU/mL. Furthermore, satisfactory stability, reproducibility, specificity and good recovery efficiency in milk samples revealed that the proposed sensor could be served as a prospective tool for food safety analysis.

Phosphorescence, fluorescence, and colorimetric triple-mode sensor for the detection of acid phosphatase and corresponding inhibitor

Acid phosphatase (ACP) as a clinical diagnostic biomarker for several pathophysiological diseases has aroused widespread interest. Compared to commonly developed single-mode ACP detection technology, the multi-mode detection method with self-validation can provide more reliable results. Herein, we proposed a triple-mode phosphorescence, fluorescence, and colorimetric method for ACP detection in combination with CDs@SiO₂. HAuCl₄ with oxidase-like activity can catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to the blue oxide TMB (TMBox), offering absorption signals and quenching the phosphorescence and fluorescence of CDs@SiO₂ based on the internal filtration effect (IFE). ACP can hydrolyze ascorbic acid 2-phosphate (AAP) to yield ascorbic acid (AA), thereby reducing TMBox to TMB, triggering solution fading and restoring phosphorescence and fluorescence signals. When the ACP inhibitor malathion is present, the reduction of TMBox is hindered, which successively led to the suppression of CDs@SiO₂ phosphorescence and fluorescence signal recovery. According to these principles, triple-mode ACP (LOD = 0.0026 mU mL^-1) and malathion detections (LOD = 0.039 μg mL^-1) with favorable accuracy and sensitivity are realized. With simplicity, robustness, and versatility, the triple-mode sensor can be extended to the detection of the AAP hydrolase family and the screening of corresponding inhibitors.

Photo-enhanced electrochemical and colorimetric dual-modal aptasensing for aflatoxin B1 detection based on graphene-gold Schottky contact

A photo-enhanced electrochemical (PEEC) and colorimetric (CM) dual-modal aptasensor was developed with rGO-AuNP Schottky contact for AFB1 monitoring. The PEEC mode allowed the ultrasensitive quantitation based on the photo-enhanced electroactivity mechanism, while the CM mode offered a rapid threshold-level qualitative assay with a portable colorimeter.

Recent Advances in the DNA-Mediated Multi-Mode Analytical Methods for Biological Samples

DNA-mediated nanotechnology has become a research hot spot in recent decades and is widely used in the field of biosensing analysis due to its distinctive properties of precise programmability, easy synthesis and high stability. Multi-mode analytical methods can provide sensitive, accurate and complementary analytical information by merging two or more detection techniques with higher analytical throughput and efficiency. Currently, the development of DNA-mediated multi-mode analytical methods by integrating DNA-mediated nanotechnology with multi-mode analytical methods has been proved to be an effective assay for greatly enhancing the selectivity, sensitivity and accuracy, as well as detection throughput, for complex biological analysis. In this paper, the recent progress in the preparation of typical DNA-mediated multi-mode probes is reviewed from the aspect of deoxyribozyme, aptamer, templated-DNA and G-quadruplex-mediated strategies. Then, the advances in DNA-mediated multi-mode analytical methods for biological samples are summarized in detail. Moreover, the corresponding current applications for biomarker analysis, bioimaging analysis and biological monitoring are introduced. Finally, a proper summary is given and future prospective trends are discussed, hopefully providing useful information to the readers in this research field.

A smartphone-assisted colorimetric and photothermal probe for glutathione detection based on enhanced oxidase-mimic CoFeCe three-atom nanozyme in food

The rational fabrication of point-of-care testing (POCT) featuring simplicity, rapidity, low cost, portability, high sensitivity and accuracy is crucial for maintaining food safety in resource-limited locations and home healthcare but remains challenging. Herein, we report a universal colorimetric-photothermal-smartphone triple-mode sensing platform for POC food-grade glutathione (GSH) detection. This simple sensing platform for GSH detection takes merits of three techniques: commercially available filter paper, thermometer and smartphone via an excellent CoFeCe-mediated oxidase-like activity. This strategy allows CoFeCe three-atom hydroxide to efficiently convert dissolved oxygen into O₂^·- and catalyzes 3, 3', 5, 5'-tertamethylbenzidine (TMB) to generate an oxidized TMB with remarkable color changes and photothermal effect, resulting in a colorimetric-temperature-color triple-mode signal output. The constructed sensor exhibits high sensitivity with a limit of detection of 0.092 μM for GSH detection. We expect this sensing platform can be easily modified for the determination of GSH in commercial samples with the simple testing strips.

Electrochemical sensor for single-cell determination of bacteria based on target-triggered click chemistry and fast scan voltammetry

Herein, an electrochemical sensor for single-cell determination of bacteria was developed based on target-triggered click chemistry and fast scan voltammetry (FSV). In it, bacteria not only are the detection target, but also can use their own metabolism to achieve first-level signal amplification. More electrochemical labels were immobilized on functionalized 2D nanomaterials to achieve second-level signal amplification. At 400 V/s, FSV can achieve third-level signal amplification. The linear range and limit of quantification (LOQ) are 1 ∼ 10⁸ CFU/mL and 1 CFU/mL, respectively. When the reaction time of E. coli-instructed Cu²⁺ reduction is extended to 120 min, PCR-free single-cell determination of E. coli was achieved by electrochemical method first time. The feasibility of the sensor was verified by analysis of E. coli in seawater and milk samples with recoveries ranging from 94% to 110%. This detection principle is widely applicable, providing a new path for the establishment of single-cell detection strategy for bacteria.

DNA Walkers for Biosensing Development

The ability to design nanostructures with arbitrary shapes and controllable motions has made DNA nanomaterials used widely to construct diverse nanomachines with various structures and functions. The DNA nanostructures exhibit excellent properties, including programmability, stability, biocompatibility, and can be modified with different functional groups. Among these nanoscale architectures, DNA walker is one of the most popular nanodevices with ingenious design and flexible function. In the past several years, DNA walkers have made amazing progress ranging from structural design to biological applications including constructing biosensors for the detection of cancer-associated biomarkers. In this review, the key driving forces of DNA walkers are first summarized. Then, the DNA walkers with different numbers of legs are introduced. Furthermore, the biosensing applications of DNA walkers including the detection- of nucleic acids, proteins, ions, and bacteria are summarized. Finally, the new frontiers and opportunities for developing DNA walker-based biosensors are discussed.

Rapid 16S rDNA electrochemical sensor for detection of bacteria based on the integration of target-triggered hairpin self-assembly and tripedal DNA walker amplification

Diseases caused by bacteria pose great challenges to human health. The key to reduce disease transmission and mortality is to develop accurate and rapid methods for the detection and identification of bacteria. Herein, a rapid bacteria 16S rDNA electrochemical sensor based on target-triggered hairpin self-assembly and tripedal DNA walker (TD walker) amplification strategy was constructed. Specific variable region of 16S rDNA fragment of bacteria was used as biomarker. The target-triggered hairpin self-assembly strategy was used to prepare a TD walker. The hairpin DNA probes labeled with ferrocene (F_c) were designed and modified on surface of electrode. The "legs" of TD walker hybridized with three hairpin probes and opened their hairpin structures. Exo III enzyme recognised hybrid duplexes and selectively digest hairpin probes. The "legs" of TD walker was released and hybridized with the other three hairpin probes. In this way, the enzyme drived the walkers to walk along electrode interface, until hairpin DNA probes were all removed from the electrode, the F_c was far away from electrode interface. A significantly current reduction signal was obtained and bacteria were detected by recording this response. This strategy was low-cost and scalable, it could continuously recycle low-concentration targets, thus enhanced the detection sensitivity. As the proof-of-concept work, the electrochemical sensor was utilized as detector. The limit of detection (LOD) of detecting Staphylococcus aureus (S. aureus) was 20 CFU mL^-1 and detection time was less than 3 h. It was expected to be widely used in clinical early diagnosis.

Signal enhancing strategies in aptasensors for the detection of small molecular contaminants by nanomaterials and nucleic acid amplification

Small molecular contaminants (such as mycotoxins, antibiotics, pesticide residues, etc.) in food and environment have given rise to many biological and ecological toxicities, which has attracted worldwide attention in recent years. Meanwhile, due to the advantages of aptamers such as high specificity and stability, easy synthesis and modification, as well as low cost and immunogenicity, various aptasensors for the detection of small molecular contaminants have been flourishing. An aptasensor as a whole is composed of an aptamer-based target recognizer and a signal transducer, which are fields of concentrated research. In the practical detection applications, in order to achieve the quantitative detection of small molecular contaminants at low abundance in real samples, a large number of signal enhancing strategies have been utilized in the development of aptasensors. Recent years is a vintage period for efficient signal enhancing strategies of aptasensors by the aid of nanomaterials and nucleic acid amplification that are applied in the elements for target recognition and signal conversion. Therefore, this paper meticulously reviews the signal enhancing strategies based on nanomaterials (including the (quasi-)zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanomaterials) and nucleic acid amplification (including enzyme-assisted nucleic acid amplification and enzyme-free nucleic acid amplification). Furthermore, the challenges and future trends of the abovementioned signal enhancing strategies for application are also discussed in order to inspire the practitioners in the research and development of aptasensors for small molecular contaminants.