1
|
Kim M, Kang DH, Choi JH, Choi DG, Lee J, Lee J, Jung JY. Highly sensitive and label-free protein immunoassay-based biosensor comprising infrared metamaterial absorber inducing strong coupling. Biosens Bioelectron 2024; 260:116436. [PMID: 38824701 DOI: 10.1016/j.bios.2024.116436] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/08/2023] [Revised: 03/25/2024] [Accepted: 05/26/2024] [Indexed: 06/04/2024]
Abstract
A mid-infrared label-free immunoassay-based biosensor is an effective device to help identify and quantify biomolecules. This biosensor employs a surface-enhanced infrared absorption spectroscopy, which is a highly potent sensing technique for detecting minute quantities of analytes. In this study, a biosensor was constructed using a metamaterial absorber, which facilitated strong coupling effects. For maximum coupling effect, it is necessary to enhance the near-field intensity and the spatial and spectral overlap between the optical cavity resonance and the vibrational mode of the analyte. Due to significant peak splitting, conventional baseline correction methods fail to adequately analyze such a coupling system. Therefore, we employed a coupled harmonic oscillation model to analyze the spectral distortion resulting from the peak splitting induced by the strong coupling effect. The proposed biosensor with a thrombin-binding aptamer-based immunoassay could achieve a limit of detection of 267.4 pM, paving the way for more efficient protein detection in clinical practice.
Collapse
Affiliation(s)
- Mingyun Kim
- Department of Electrical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, 44919, Republic of Korea
| | - Do Hyun Kang
- Nano-convergence Manufacturing Research Division, Korea Institute of Machinery and Materials (KIMM), Daejeon, 305-343, Republic of Korea
| | - Jun-Hyuk Choi
- Nano-convergence Manufacturing Research Division, Korea Institute of Machinery and Materials (KIMM), Daejeon, 305-343, Republic of Korea
| | - Dae-Geun Choi
- Nano-convergence Manufacturing Research Division, Korea Institute of Machinery and Materials (KIMM), Daejeon, 305-343, Republic of Korea
| | - Jihye Lee
- Nano-convergence Manufacturing Research Division, Korea Institute of Machinery and Materials (KIMM), Daejeon, 305-343, Republic of Korea
| | - Jongwon Lee
- Department of Electrical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, 44919, Republic of Korea.
| | - Joo-Yun Jung
- Nano-convergence Manufacturing Research Division, Korea Institute of Machinery and Materials (KIMM), Daejeon, 305-343, Republic of Korea.
| |
Collapse
|
2
|
Gao W, Liu Z, Dai X, Sun W, Gong Q, Li J, Ge Y. Color-Tunable Ultralong Organic Phosphorescence: Commercially Available Triphenylmethylamine for UV-Light Response and Anticounterfeiting. Chem Asian J 2023; 18:e202300450. [PMID: 37387329 DOI: 10.1002/asia.202300450] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/22/2023] [Revised: 06/25/2023] [Accepted: 06/26/2023] [Indexed: 07/01/2023]
Abstract
Due to the unclear mechanism and lack of effective design for color-tunable ultralong organic phosphorescence (UOP) in a single-component molecule, the development of new types of single-component UOP materials with color-tunable property remains challenging. Herein, commercially available triphenylmethylamine-based single-component phosphors featuring color-tunablity and ultralong lifetime (0.56 s) are reported. The changed afterglow colors from cyan to orange were observed after different wavelengths of UV excitation. Crystal structure and calculation studies show that multiple emission centers in the aggregated states may be responsible for the color-tunablity. In addition, visual probing of UV light (from 260 to 370 nm) and colorful anti-counterfeiting were conducted. More importantly, UV light ranging from 350 to 370 nm could be detected with the minimal interval of 2 nm. The findings provide a new type of single-component color-tunable UOP materials and shed new light on mechanism and design for such materials.
Collapse
Affiliation(s)
- Wei Gao
- School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Sciences, Taian, 271016, P. R. China
| | - Zhenliang Liu
- School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Sciences, Taian, 271016, P. R. China
| | - Xianyin Dai
- School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Sciences, Taian, 271016, P. R. China
| | - Weitao Sun
- School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Sciences, Taian, 271016, P. R. China
| | - Qi Gong
- School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Sciences, Taian, 271016, P. R. China
| | - Jinwei Li
- School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Sciences, Taian, 271016, P. R. China
| | - Yanqing Ge
- School of Chemistry and Pharmaceutical Engineering, Shandong First Medical University & Shandong Academy of Medical Sciences, Taian, 271016, P. R. China
| |
Collapse
|
3
|
Liu R, Zhang Y, Liu M, Ni Y, Yue Y, Wu S, Li S. Electrochemical sensor based on Fe3O4/α-Fe2O3@Au magnetic nanocomposites for sensitive determination of the TP53 gene. Bioelectrochemistry 2023; 152:108429. [PMID: 37023617 DOI: 10.1016/j.bioelechem.2023.108429] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2023] [Revised: 03/09/2023] [Accepted: 03/24/2023] [Indexed: 03/29/2023]
Abstract
Considering the high cost and tedious process of gene sequencing, there is an urgent need to develop portable and efficient sensors for the TP53 gene. Here, we developed a novel electrochemical sensor that detected the TP53 gene using magnetic peptide nucleic acid (PNA)-modified Fe3O4/α-Fe2O3@Au nanocomposites. Cyclic voltammetry and electrochemical impedance spectroscopy confirmed the successful stepwise construction of the sensor, especially the high-affinity binding of PNA to DNA strands, which induced different electron transfer rates and resulted in current changes. Variations in the differential pulse voltammetry current observed during hybridization at different surface PNA probe densities, hybridization times, and hybridization temperatures were explored. The biosensing strategy obtained a limit of detection of 0.26 pM, a limit of quantification of 0.85 pM, and a wide linear range (1 pM-1 μM), confirming that the Fe3O4/α-Fe2O3@Au nanocomposites and the strategy based on magnetic separation and magnetically induced self-assembly improved the binding efficiency of nucleic acid molecules. The biosensor was a label-free and enzyme-free device with excellent reproducibility and stability that could identify single-base mismatched DNA without additional DNA amplification procedures, and the serum spiked experiments revealed the feasibility of the detection approach.
Collapse
|
4
|
Shao W, Kim J. Metal-Free Organic Phosphors toward Fast and Efficient Room-Temperature Phosphorescence. Acc Chem Res 2022; 55:1573-1585. [PMID: 35613040 DOI: 10.1021/acs.accounts.2c00146] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
ConspectusMetal-free purely organic phosphors (POPs) are promising materials for display technologies, solid-state lighting, and sensors platforms because of their advantageous properties such as large design windows, easy processability, and economic material cost. Unlike inorganic semiconductors, creating the conditions for triplet excitons to produce light in organic materials is a demanding task because of the presence of electron spin configurations that undergo spin-forbidden transitions, which is usually facilitated by spin-orbit coupling (SOC). In the absence of heavy metals, however, the SOC efficiency in POPs remains low, and consequently, external nonradiative photophysical processes will also severely affect triplet excitons. Addressing these challenges requires the development of rational molecular design principles to accurately account for how all conceivable structural, electronic, chemical, compositional factors affect materials performance.This Account summarizes important molecular design and matrix engineering strategies to tackle the two key challenges for POPs─boosting SOC efficiencies and suppressing nonradiative decays. We start by reviewing the fundamental understanding of internal and external factors affecting the emission efficiencies of POPs, including the theory behind SOC and the origin of nonradiative decays. Subsequently, we discuss the design of contemporary POP systems on the basis of research insights from our group and others, where SOC is mostly promoted by heavy atom effects and the El-Sayed rule. On one hand, nonmetal heavy atoms including Br, I, or Se provide the heavy atom effects to boost SOC. On the other hand, the El-Sayed rule addresses the necessity of orbital angular momentum change in SOC and the general utilization of carbonyl, heterocyclic rings, and other moieties with rich nonbonding electrons. Because of the slow-decaying nature of triplet excitons, engineering the matrices of POPs is critical to effectively suppress collisional quenching as the major nonradiative decay route, thus achieving POPs with decent room temperature quantum efficiency. For that purpose, crystalline or rigid amorphous matrices have been implemented along with specific intermolecular forces between POPs and their environment.Despite the great efforts made in the past decade, the intrinsic SOC efficiencies of POPs remain low, and their emission lifetimes are pinned in the millisecond to second regime. While this is beneficial for POPs with ultralong emission, designing high-SOC POPs with simultaneous fast decay and high quantum efficiencies is particularly advantageous for display systems. Following the design of contemporary POPs, we will discuss molecular design descriptors that could potentially break the current limit to boost internal SOC in purely organic materials. Our recently developed concept of "heavy atom oriented orbital angular momentum manipulation" will be discussed, accompanied by a rich and expanded library of fast and efficient POP molecules, which serves as a stepping stone into the future of this field. We will conclude this Account by discussing the noteworthy application of POPs in organic light-emitting diodes (OLEDs), solid-state lighting, and sensors, as well as the remaining challenges in the design of fast and efficient POPs.
Collapse
|
5
|
Background-free room temperature phosphorescence and digital image colorimetry detection of melamine by carbon nitride quantum dots in cellulose matrix with smartphone-based portable device. Food Chem 2022; 390:133135. [PMID: 35597095 DOI: 10.1016/j.foodchem.2022.133135] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/24/2021] [Revised: 04/03/2022] [Accepted: 04/29/2022] [Indexed: 11/23/2022]
Abstract
Carbon nitride quantum dots (CNQDs) were embedded in the sodium carboxymethyl cellulose (CMC) matrix to form CNQDs-CMC film to explore the room temperature phosphorescence (RTP) of CNQDs, which suppress the non-radiative relaxation process due to the internal hydrogen bonding interactions between CMC and CNQDs. Then, a simple, inexpensive, background-free miniature device integrating with CNQDs-CMC film and smartphone was fabricated for rapid and quantitative detection of melamine (MEL). In the present of MEL, the yellow RTP color of the CNQDs-CMC film was quenched and photographed by the smartphone. The Color Recognizer APP in the smartphone recognized the red (R) value for quantitative detection of MEL. Thus, digital image colorimetry (DIC) determination of MEL was achieved due to the visible RTP color change of CNQDs-CMC film. The smartphone-based miniature device provided a promising platform for the on-site monitoring analytes in the complex matrix including food safety, environmental screening, health monitoring, and disease prevention.
Collapse
|
6
|
Zeng Y, Nguyen VP, Li Y, Kang DH, Paulus YM, Kim J. Chorioretinal Hypoxia Detection Using Lipid-Polymer Hybrid Organic Room-Temperature Phosphorescent Nanoparticles. ACS APPLIED MATERIALS & INTERFACES 2022; 14:18182-18193. [PMID: 35420786 PMCID: PMC9780709 DOI: 10.1021/acsami.2c02767] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Ischemia-induced hypoxia is a common complication associated with numerous diseases and is the most important prognostic factor in retinal vein occlusions (RVOs). Early detection and long-term visualization of retinal tissue hypoxia is essential to understand the pathophysiology and treatment of ischemic retinopathies. However, no effective solution exists to evaluate extravascular retinal tissue oxygen tension. Here, we demonstrate a lipid-polymer hybrid organic room-temperature phosphorescence (RTP) nanoparticle (NP) platform that optically detects tissue hypoxia in real-time with high signal-to-noise ratio. The fabricated NPs exhibit long-lived bright RTP, high sensitivity toward oxygen quenching, and desirable colloidal and optical stability. When tested as a hypoxia imaging probe in vivo using rabbit RVO and choroidal vascular occlusion (CVO) models via intravitreal and intravenous (IV) injections, respectively, its RTP signal is exclusively turned on where tissue hypoxia is present with a signal-to-noise ratio of 12.5. The RTP NP platform is compatible with multimodal imaging. No ocular or systemic complications are observed with either administration route. The developed organic RTP NPs present a novel platform approach that allows for biocompatible, nondestructive detection of tissue hypoxia and holds promise as a sensitive imaging tool to monitor longitudinal tissue oxygen levels and evaluate various hypoxia-driven vascular diseases.
Collapse
Affiliation(s)
- Yingying Zeng
- Macromolecular Science and Engineering, University of Michigan 2800 Plymouth Road, Ann Arbor, MI 48109, USA
- Biointerfaces Institute, University of Michigan 2800 Plymouth Road, Ann Arbor, MI 48105, USA
| | - Van Phuc Nguyen
- Department of Ophthalmology and Visual Sciences Kellogg Eye Center, University of Michigan 1000 Wall Street, Ann Arbor, MI 48105, USA
- NTT-Hi Tech Institute, Nguyen Tat Thanh University, Ho Chi Minh, Vietnam
| | - Yanxiu Li
- Department of Ophthalmology and Visual Sciences Kellogg Eye Center, University of Michigan 1000 Wall Street, Ann Arbor, MI 48105, USA
| | - Do Hyun Kang
- Biointerfaces Institute, University of Michigan 2800 Plymouth Road, Ann Arbor, MI 48105, USA
- Department of Materials Science and Engineering, University of Michigan 2300 Hayward St, Ann Arbor, MI 48109, USA
| | - Yannis M. Paulus
- Department of Ophthalmology and Visual Sciences Kellogg Eye Center, University of Michigan 1000 Wall Street, Ann Arbor, MI 48105, USA
- Department of Biomedical Engineering, University of Michigan 2200 Bonisteel Blvd, Ann Arbor, MI 48109, USA
| | - Jinsang Kim
- Macromolecular Science and Engineering, University of Michigan 2800 Plymouth Road, Ann Arbor, MI 48109, USA
- Biointerfaces Institute, University of Michigan 2800 Plymouth Road, Ann Arbor, MI 48105, USA
- Department of Materials Science and Engineering, University of Michigan 2300 Hayward St, Ann Arbor, MI 48109, USA
- Department of Biomedical Engineering, University of Michigan 2200 Bonisteel Blvd, Ann Arbor, MI 48109, USA
- Department of Chemistry, University of Michigan 930 N. University Ave, Ann Arbor, MI 48109, USA
- Department of Chemical Engineering, University of Michigan 2300 Hayward St, Ann Arbor, MI 48109, USA
| |
Collapse
|