Ultrasensitive near-infrared aptasensor for enrofloxacin detection based on wavelength tunable AgBr nanocrystals electrochemiluminescence emission triggered by O-terminated Ti3C2 MXene

Enhancing electrochemiluminescence for chloramphenicol detection based on the synergistic effect of doped Ti3C2 with ultrasound

Chloramphenicol (CAP) is known to be harmful to the environment and food, posing a threat to human health. Developing an effective and convenient method for detecting CAP is crucial. An electrochemiluminescence (ECL) biosensor has been designed for sensitive detection of CAP. The improved ECL behavior was attributed to the synergistic effect of N and P co-doped Ti3C2-Apt1 (N, P-Ti3C2-Apt1) nanoprobes and high intensity focused ultrasound (HIFU) pretreatment. The doping of N and P could improve the electrochemical performance of Ti3C2. HIFU pretreatment generated more reactive oxygen species (ROS) in the luminol-O2 system. N, P-Ti3C2 could aggregate and catalyze ROS, causing an increase in ECL intensity. Furthermore, N, P-Ti3C2 as a carrier loaded more aptamer, which could recognize CAP with high specificity. The detection limit was 0.01 ng/mL. This biosensor has been successfully applied in milk and environmental water samples, highlighting its potential in the field of food and environmental analysis.

Near-infrared electrochemiluminescence biosensors facilitated by thermally activated delayed fluorescence (TADF) emitters for ctDNA analysis

The near-infrared electrochemiluminescence technique (NIR ECL) has gained significant attention as a powerful analytical tool in biomedicine and clinical diagnosis due to its inherent advantages. In this work, we successfully synthesized a novel NIR ECL emitter of TPA-DCPP nanoparticles (NPs) with a D-π-A-π-D configuration. By utilizing the thermally activated delayed fluorescence (TADF) property, we achieved enhanced electrochemiluminescence (ECL) emission through complete exciton harvesting for radiative decay. Specifically, when BDEA was used as a co-reactant, the TPA-DCPP NPs exhibited strong bandgap ECL emission. Additionally, they demonstrated an exceptionally higher ECL efficiency compared to conventional near-infrared fluorescence organic nanomaterials (BSeT-BT NPs). By integrating the efficient anodic ECL performance of TPA-DCPP NPs with Exo III-assisted polymerase enzyme reaction cascade amplification, a highly efficient ECL resonance energy transfer (ECL-RET) platform was developed for ultrasensitive detection of circulating tumor DNA (ctDNA). The established biosensor demonstrated an exceptional linear dynamic range and achieved attomolar-level detection limit. This study highlights the immense potential of TADF emitters in enhancing ECL efficiency and extends the emission wavelength of organic nanomaterials to the NIR region, thereby expanding their applications in biological analysis.

Advances in MXene-based luminescence sensing strategies

MXenes have attracted the attention of many researchers as one of the latest two-dimensional (2D) materials over the last decade. Their great potential for biosensing has also been fully exploited after the discovery of their unique properties such as superior optical properties, excellent hydrophilicity, good thermal stability, excellent mechanical property, high electrical conductivity, biocompatibility, large surface area, and ease of surface functionalization. In the MXene-based luminescence sensing strategy, MXenes typically appear in the form of nanosheets, quantum dots and modified MXene nanocomposites, and they are utilized as different sensing platforms or as a luminescence source. In this review, we focused on the MXene-based luminescence sensing strategies, including fluorescence, electrochemiluminescence and chemiluminescence sensors and the comparison of their performance. Finally, the perspectives of the MXene-based luminescence sensors are discussed.

Simple and sensitive fluorescence sensing of methyl parathion based on the inner filter effect of p-nitrophenol on nitrogen-doped titanium carbide quantum dots

It is of great significance to develop an effective method for methyl parathion (MP) detection. Herein, a novel nitrogen-doped titanium carbide quantum dots (N-Ti3 C2 QDs) was prepared and used to construct a simple and sensitive fluorescence sensing platform of MP by making use of inner filter effect (IFE). The prepared N-Ti3 C2 QDs can exhibit strong blue fluorescence at 434 nm. Meanwhile, MP could hydrolyze to produce p-nitrophenol (p-NP) under alkaline conditions, which showed a characteristic ultraviolet-visible (UV-visible) absorption peak at 405 nm, resulting in the fluorescence of N-Ti3 C2 QDs is effectively quenched by p-NP. In addition, the investigation of time-resolved fluorescence decays indicated that the corresponding quenching mechanism of p-NP on N-Ti3 C2 QDs is due to the IFE. After optimizing the conditions, the as-developed fluorescence sensing platform displayed wide detection range (0.1-30 μg mL-1 ) and low detection limit (0.036 μg mL-1 ) for MP, and it was also successfully applied for MP analysis in real water samples, thus it is expected that this simple, sensitive and enzyme-free sensing platform shows great applications.

Copper nanoclusters electrochemiluminescence with tunable near-infrared emission wavelength for ultrasensitive detection of matrix metalloproteinase-2

Herein, the methionine (Met)/N-acetyl-L-cysteine (NAC) templated copper nanoclusters (Met/NAC-Cu NCs) with tunable near-infrared region (NIR) electrochemiluminescence (ECL) emission wavelength was firstly synthesized as emitter for the ultrasensitive detection of matrix metalloproteinase-2 (MMP-2). Significantly, the NAC played the role of template and reductant of cupric to acquire Cu NCs, and the surface defect regulator Met was used to connect NAC through -S-S- bond, which could heighten the surface defect of Cu NCs to continuously regulate the maximum ECL emission by successively controlling the molar ratio of Met and NAC, leading to the ECL emission wavelength of Cu NCs ranged from 680 nm to 750 nm. In addition, a rapid target triggered catalyst hairpin assembly (CHA) recycling amplification strategy was constructed through orderly and equidistantly arranging hairpin to increase its local concentration, resulting in greatly accelerated signal amplification efficiency and reaction rate. As a proof of concept, based on Met/NAC-Cu NCs as NIR ECL emitter and effective signal amplification tactic, a super-sensitive ECL biosensor was fabricated to detect target MMP-2 with the detection limit (LOD) as low as 1.65 fg/mL and successfully utilized for detecting of MMP-2 that from Hela and MCF-7 cancer cells. This research provided a wonderful avenue for regulating the optical performance of metal nanoclusters-based ECL emitters, and the developed neoteric NIR ECL emitter with the merits of less photochemical damage and deeper tissue penetration exhibited great potential in ultrasensitive biosensing and high-definition ECL imaging.

Novel inner filter effect-based near-infrared electrochemiluminescence sensor mediated by well-matched AgBr-nitrogen-doped Ti3C2 MXene and nonmetallic plasmon WO3•H2O

The development of innovative and efficient strategy is of paramount importance for near-infrared (NIR) electrochemiluminescence (ECL) sensing, which can substantially promote ECL detection in a wide range of situations. Herein, the inner filter effect (IFE) strategy was designed to construct an ultrasensitive NIR ECL biosensor based on the well-matched AgBr nanocrystals (NCs) decorated nitrogen-doped Ti3C2 MXene nanocomposites (AgBr-N-Ti3C2) and hydrated defective tungsten oxide nanosheets (dWO3•H2O). Specifically, the AgBr-N-Ti3C2 nanocomposites displayed extremely effective NIR ECL emission because N-doping could accelerate electron transfer and boost the red-shift of the ECL spectrum. The nonmetallic plasmon dWO3•H2O was used as an absorber due to its facile tuning of the spectra overlap and higher molar extinction coefficients. Time-resolved emission decay curves proved that the decreased ECL intensity was ascribed to the IFE-based steady quenching mechanism. With the support of tetracycline (TC) aptamer and the complementary DNA chain, the fabricated NIR ECL-IFE biosensor performed a wide linear range of 100 nM ∼ 10 fM with a low detection limit of 2.2 fM (S/N = 3), and it exhibited excellent stability, sensitivity, and reproducibility, so as to be applied to real samples. This strategy opens a new avenue to constructing an efficient NIR ECL-IFE system and shows excellent practical potential in actual sample analysis.

Antenna effect of perylene-sensitized up-conversion luminescent material amplifies the signal of electrochemiluminescence biosensor platform for the ultra-sensitive detection of enrofloxacin

Recently, up-conversion luminescent (UCL) materials have caught extensive sight on account of their excellent biocompatibility and weak automatic fluorescence background, but the low optical signal makes researchers shy away. Organic dye-sensitized UCL materials can improve the low optical signal drawback of UCL and rejuvenate it with adjustable optical properties and unique antenna effects. In this work, an efficient, simple and selective electrochemiluminescence (ECL) sensing platform was developed for determination of enrofloxacin (ENR). 3,4,9,10-perylene tetracarboxylic acid (PTCA) was successfully used as an "antenna" to improve the ECL performance of the UCL nanoparticles (PEI-NaYF4: Yb, Er) due to its appropriate excitation spectrum position and superior electron transfer rate. The specific recognition function of the aptamer enabled the sensor to eliminate the interference from conspecific impurity. In the presence of ENR, the specific combination of ENR with aptamer made the aptamer fall from surface of the electrode, thus we could see a considerable enhancement of signal. Under the most favourable conditions, the aptasensor based on antenna effect displayed a wide detection range (1.0 × 10-14∼1.0 × 10-6 M), low limit of detection (LOD = 3.0 × 10-15 M) and receivable recoveries (96.0%-102.4%) during water samples analysis. At this point, antenna effect provides a powerful strategy to expand the application of UCL in the field of ECL biosensing.

Defective porphyrin-based metal-organic framework nanosheets derived from V2CTx MXene as a robust bioplatform for impedimetric aptasensing 17β-estradiol

An electrochemical aptasensor was prepared for the efficient, sensitive, and selective detection of 17β-estradiol. The sensor was based on a defective two-dimensional porphyrin-based metal-organic framework derived from V₂CT_x MXene. The resulting metal-organic framework nanosheets benefited from the advantages of V₂CT_x MXene nanosheets and porphyrin-based metal-organic framework, two-dimensional porphyrin-based metal-organic framework nanosheets demonstrated amplified electrochemical response and enhanced aptamer-immobilization ability compared with V₂CT_x MXene nanosheets. The sensor's detection limit was ultralow at 0.81 fg mL^-1 (2.97 fM), and the 17β-estradiol concentration range was wide, thereby outperforming most reported aptasensors. The high selectivity, superior stability and reproducibility, and excellent regeneration performance of the constructed aptasensor indicated its remarkable potential application for 17β-estradiol determination in diverse real samples. This aptasensing strategy can be used to analyze other targets by replacing the corresponding aptamer.

Current Trends in Nanomaterials-Based Electrochemiluminescence Aptasensors for the Determination of Antibiotic Residues in Foodstuffs: A Comprehensive Review

Veterinary pharmaceuticals have been recently recognized as newly emerging environmental contaminants. Indeed, because of their uncontrolled or overused disposal, we are now facing undesirable amounts of these constituents in foodstuff and its related human health concerns. In this context, developing a well-organized environmental and foodstuff screening toward antibiotic levels is of paramount importance to ensure the safety of food products as well as human health. In this case, with the development and progress of electric/photo detecting, nanomaterials, and nucleic acid aptamer technology, their incorporation-driven evolving electrochemiluminescence aptasensing strategy has presented the hopeful potentials in identifying the residual amounts of different antibiotics toward sensitivity, economy, and practicality. In this context, we reviewed the up-to-date development of ECL aptasensors with aptamers as recognition elements and nanomaterials as the active elements for quantitative sensing the residual antibiotics in foodstuff and agriculture-related matrices, dissected the unavoidable challenges, and debated the upcoming prospects.

Highly efficient near-infrared electrochemiluminescence resonance energy transfer system for biosensing: Nonmetallic plasmon Mediated well-matched energy donor-acceptor pair

Herein, a well-matched energy donor-acceptor pair strategy was designed to construct highly efficient NIR ECL-RET system. In detail, an ECL amplification system consisting of SnS₂ quantum dots decorated Ti₃C₂ MXene nanocomposites (SnS₂ QDs-Ti₃C₂) as the energy donor were developed via a one-pot method, and the nanocomposites exhibited highly efficient NIR ECL emission due to the surface-defect effect generated by the oxygen-containing functional groups in MXene. Nonmetallic plasmon hydrated defective tungsten oxide nanosheets (dWO₃•H₂O) were utilized as energy acceptors because of its strong surface plasmon resonance effect in Vis-NIR absorption range. Compared with non-defective tungsten oxide hydrate nanosheets (WO₃•H₂O), the overlapping area between ECL spectrum of SnS₂ QDs-Ti₃C₂ and UV-vis spectrum of dWO₃•H₂O was increased by 2.1 times, and the results showed that more efficient quenching effect was obtained. As a proof of concept, tetracycline (TCN) aptamer and its complementary chain were served as a bridge to connect the energy donor and acceptor, achieving the successful construction of NIR ECL-RET aptasensor. The as-fabricated ECL sensing platform exhibited a low detection limit of 6.2 fM (S/N = 3) within a wide linear range from 10 fM to 10 μM. Besides, the NIR ECL-RET aptasensor also showed excellent stability, reproducibility and selectivity, providing a promising tool to detect TCN in real samples. This strategy offered a universal and effective method in constructing highly efficient NIR ECL-RET system for developing rapid, sensitive and accurate biological detection platform.

MoS2 QDs-MXene heterostructure-based ECL sensor for the detection of miRNA-135b in gastric cancer exosomes

Exosomes play an important role in the proliferation, adhesion and migration of cancer cells. In this study, we have developed a novel electrochemiluminescence (ECL) sensor based on MoS₂ QDs-MXene heterostructure and Au NPs@biomimetic lipid layer to detect exosomal miRNA. MoS₂ QDs-MXene heterostructure had been prepared as the luminescence probe. Ti₃C₂T_x MXene nanosheets possessed the large specific surface area, excellent flexibility and superior conductivity. MoS₂ QDs on the MXene nanosheets worked as the radiation center to generate strong ECL signal. Meanwhile, Au NPs with biomimetic lipid layer have been modified on the electrode, which retained the lipid dynamics and excellent antifouling property. When miRNA-135b was recognized on the Au NPs@biomimetic lipid layer, MoS₂ QDs-MXene heterostructure was linked on the electrode and further extended the outer Helmholtz plane. As a result, the self-luminous Faraday cage-mode sensing system has been used to detect miRNA-135b from 30 fM to 20 nM with a detection limit of 10 fM. Furthermore, gastric cancer exosomal miRNA in the ascites of clinical patients has been detected successfully. The sensing system can be served as a versatile platform with huge application potential in the field of exosome detection.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

2D MXene-Based Biosensing: A Review

MXene emerged as decent 2D material and has been exploited for numerous applications in the last decade. The remunerations of the ideal metallic conductivity, optical absorbance, mechanical stability, higher heterogeneous electron transfer rate, and good redox capability have made MXene a potential candidate for biosensing applications. The hydrophilic nature, biocompatibility, antifouling, and anti-toxicity properties have opened avenues for MXene to perform in vitro and in vivo analysis. In this review, the concept, operating principle, detailed mechanism, and characteristic properties are comprehensively assessed and compiled along with breakthroughs in MXene fabrication and conjugation strategies for the development of unique electrochemical and optical biosensors. Further, the current challenges are summarized and suggested future aspects. This review article is believed to shed some light on the development of MXene for biosensing and will open new opportunities for the future advanced translational application of MXene bioassays.

MXene-Based Nucleic Acid Biosensors for Agricultural and Food Systems

MXene is a two-dimensional (2D) nanomaterial that exhibits several superior properties suitable for fabricating biosensors. Likewise, the nucleic acid (NA) in oligomerization forms possesses highly specific biorecognition ability and other features amenable to biosensing. Hence the combined use of MXene and NA is becoming increasingly common in biosensor design and development. In this review, MXene- and NA-based biosensors are discussed in terms of their sensing mechanisms and fabrication details. MXenes are introduced from their definition and synthesis process to their characterization followed by their use in NA-mediated biosensor fabrication. The emphasis is placed on the detection of various targets relevant to agricultural and food systems, including microbial pathogens, chemical toxicants, heavy metals, organic pollutants, etc. Finally, current challenges and future perspectives are presented with an eye toward the development of advanced biosensors with improved detection performance.

Perspectives and Trends in Advanced MXenes-Based Optical Biosensors for the Recognition of Food Contaminants

Fabricating novel biosensing constructs with high sensitivity and selectivity is highly demanded in food contaminants detection. In this prospect, various nanostructured materials were envisaged to build (bio)sensors with superior sensitivity and selectivity. The desirable biocompatibility, brilliant mechanical strength, ease of surface functionalization, as well as tunable optical and electronic features, portray 2D MXenes as versatile scaffolds for biosensing. In this review, we overviewed the state-of-the-art MXenes-based optical biosensing devices to detect mycotoxins, pesticide residues, antibiotic residues, and food borne-pathogens from foodstuff and environmental matrices. Firstly, the synthesis methods and surface functionalization/modification of MXenes are discussed. Secondly, according to the target analytes, we categorized and presented a detailed account of the newest research progress of MXenes-based optical probes for food contaminants monitoring. The efficiency of all the surveyed probes was assessed on the basis of important factors like response time, detection limit (DL), and sensing range. Lastly, the necessity and requirements for future advances in this emerging MXenes material are also given, followed by challenges and opportunities. We hope that this study will bridge the gap between nanotechnology and food science, offering insights for engineers or scientists in both areas to accelerate the progress of MXenes-based materials for food safety detection.