Wafer-scale nanocracks enable single-molecule detection and on-site analysis

Recent Development and Applications of Stretchable SERS Substrates

Surface-enhanced Raman scattering (SERS) is a cutting-edge technique for highly sensitive analysis of chemicals and molecules. Traditional SERS-active nanostructures are constructed on rigid substrates where the nanogaps providing hot-spots of Raman signals are fixed, and sample loading is unsatisfactory due to the unconformable attachment of substrates on irregular sample surfaces. A flexible SERS substrate enables conformable sample loading and, thus, highly sensitive Raman detection but still with limited detection capabilities. Stretchable SERS substrates with flexible sample loading structures and controllable hot-spot size provide a new strategy for improving the sample loading efficiency and SERS detection sensitivity. This review summarizes and discusses recent development and applications of the newly conceptual stretchable SERS substrates. A roadmap of the development of SERS substrates is reviewed, and fabrication techniques of stretchable SERS substrates are summarized, followed by an exhibition of the applications of these stretchable SERS substrates. Finally, challenges and perspectives of the stretchable SERS substrates are presented. This review provides an overview of the development of SERS substrates and sheds light on the design, fabrication, and application of stretchable SERS systems.

Antibody- and aptamer-free SERS substrate for ultrasensitive and anti-interference detection of SARS-CoV-2 spike protein in untreated saliva

Sensitive and anti-interference detection of targeted signal(s) in body fluids is one of the paramount tasks in biosensing. Overcoming the complication and high cost of antibody/aptamer-modification, surface-enhanced Raman spectroscopy (SERS) based on antibody/aptamer-free (AAF) substrates has shown great promise, yet with rather limited detection sensitivity. Herein, we report ultrasensitive and anti-interference detection of SARS-CoV-2 spike protein in untreated saliva by an AAF SERS substrate, applying the evanescent field induced by the high-order waveguide modes of well-defined nanorods for SERS for the first time. A detection limit of 3.6 × 10-17 M and 1.6 × 10-16 M are obtained in phosphate buffered saline and untreated saliva, respectively; the detection limits are three orders of magnitude improved than the best records from AAF substrates. This work unlocks an exciting path to design AAF SERS substrates for ultrasensitive biosensing, not limited to detection of viral antigens.

Direct Thermal Growth of Gold Nanopearls on 3D Interweaved Hydrophobic Fibers as Ultrasensitive Portable SERS Substrates for Clinical Applications

Surface-enhanced Raman spectroscopy (SERS)-based biosensors have attracted much attention for their label-free detection, ultrahigh sensitivity, and unique molecular fingerprinting. In this study, a wafer-scale, ultrasensitive, highly uniform, paper-based, portable SERS detection platform featuring abundant and dense gold nanopearls with narrow gap distances, are prepared and deposited directly onto ultralow-surface-energy fluorosilane-modified cellulose fibers through simple thermal evaporation by delicately manipulating the atom diffusion behavior. The as-designed paper-based SERS substrate exhibits an extremely high Raman enhancement factor (3.9 × 10¹¹ ), detectability at sub-femtomolar concentrations (single-molecule level) and great signal reproductivity (relative standard deviation: 3.97%), even when operated with a portable 785-nm Raman spectrometer. This system is used for fingerprinting identification of 12 diverse analytes, including clinical medicines (cefazolin, chloramphenicol, levetiracetam, nicotine), pesticides (thiram, paraquat, carbaryl, chlorpyrifos), environmental carcinogens (benzo[a]pyrene, benzo[g,h,i]perylene), and illegal drugs (methamphetamine, mephedrone). The lowest detection concentrations reach the sub-ppb level, highlighted by a low of 16.2 ppq for nicotine. This system appears suitable for clinical applications in, for example, i) therapeutic drug monitoring for individualized medication adjustment and ii) ultra-early diagnosis for pesticide intoxication. Accordingly, such scalable, portable and ultrasensitive fibrous SERS substrates open up new opportunities for practical on-site detection in biofluid analysis, point-of-care diagnostics and precision medicine.

A planar plasmonic nano-gap and its array for enhancing light-matter interactions at the nanoscale

Gap surface plasmon (GSP) modes, the localized electromagnetic modes existing between two metal structures separated by a nano-gap, are able to support subwavelength confinement and enhancement of a light field upon resonance excitation. Such features can greatly facilitate various light-matter interactions at the nanoscale. Here, we demonstrate a planar nano-gap architecture existing between a pair of tip-shaped gold pads. The nano-gap gives rise to plasmon resonances with strong light confinement close to the tip surfaces in the visible to near-infrared spectral region. Accordingly, we showed that the plasmonic gold nano-gap can exhibit strong intrinsic second-harmonic generation (SHG) and significantly enhance the Raman scattering signal from small molecules. Furthermore, by arranging the nano-gap into arrays, a stronger SHG signal can be obtained. In addition, the surface enhanced Raman scattering (SERS) activity is also improved by two orders of magnitude compared to that of a single nano-gap. Overall, the findings in our study have demonstrated the potential applications of a plasmonic nano-gap and its arrays for signal generation and sensitive chemical sensing at the nanoscale.

Charge Transfer in Patterned Bilayer Film of Ag/ZnS Composite by Magnetron Control Sputtering

Ordered heterojunction nanocap arrays composed of the bilayer film Ag/ZnS were prepared onto ordered two-dimensional polystyrene bead arrays by magnetron control sputtering, and the surface morphologies were tuned by changing the ZnS thickness. When the ZnS thickness varied from 10 to 30 nm with a Ag thickness of 5 nm, the roughness of the bilayer film Ag/ZnS increased obviously. The UV–VIS spectra showed the shifted LSPR peaks with ZnS thickness, which was attributed to the changes of the electron density as confirmed by Hall effect analysis. SERS observations confirmed the charge transfer process for the varied electromagnetic couplings when the ZnS thickness changed.

Wafer-Scale LSPR Substrate: Oblique Deposition of Gold on a Patterned Sapphire Substrate

Label-free detection of biomolecules using localized surface plasmon resonance (LSPR) substrates is a highly attractive method for point-of-care (POC) testing. One of the remaining challenges to developing LSPR-based POC devices is to fabricate the LSPR substrates with large-scale, reproducible, and high-throughput. Herein, a fabrication strategy for wafer-scale LSPR substrates is demonstrated using reproducible, high-throughput techniques, such as nanoimprint lithography, wet-etching, and thin film deposition. A transparent sapphire wafer, on which SiO₂-nanodot hard masks were formed via nanoimprint lithography, was anisotropically etched by a mixed solution of H₂SO₄ and H₃PO₄, resulting in a patterned sapphire substrate (PSS). An LSPR substrate was finally fabricated by oblique deposition of Au onto the PSS, which was then applied to label-free detection of the binding events of biomolecules. To the best of our knowledge, this paper is the first report on the application of the PSS used as an LSPR template by obliquely depositing a metal.