Ultrasensitive photoelectrochemical immunosensor for carcinoembryonic antigen detection based on pillar[5]arene-functionalized Au nanoparticles and hollow PANI hybrid BiOBr heterojunction

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Ultrasensitive and specific photoelectrochemical sensor for hydrogen peroxide detection based on pillar[5]arene-functionalized Au nanoparticles and MWNTs hybrid BiOBr heterojunction

A photoelectrochemical sensor for target detection of hydrogen peroxide was designed based on a new heterojunction nanocomposite which was sulfhydryl-borate ester-modified A1/B1-type pillar[5]arene (BP5)-functionalized Au NPs and multi-walled carbon nanotubes hybridized with bismuth bromide oxide (Au@BP5/MWNTs-BiOBr). The specific sensor was based on the direct induction of oxidation by hydrogen peroxide of the borate ester group of pillar[5]arene. Additionally, the local surface plasmon resonance (LSPR) of Au NPs enhanced visible light capture, the host-guest complexation of BP5 with H2O2 enhanced photocurrent response, the layer-by-layer stacked nanoflower structure of BiOBr provided large specific surface area with more active sites, and the conductivity of MWNTs enhanced the charge separation efficiency and significantly improves the stability of PEC. Their synthesis effect significantly increased the photocurrent signal and further enhanced the detection result. Under the optimal conditions, the linear concentration range of H2O2 detected by the Au@BP5/MWNTs-BiOBr sensor was from 1 to 60 pmol/L. The limit of detection (LOD) and the limit of quantification (LOQ) of the method were 0.333 pmol/L and 1 pmol/L, respectively, and the sensitivity was 6.471 pmol/L. Importantly, the PEC sensor has good stability, reproducibility, and interference resistance and can be used for the detection of hydrogen peroxide in real cells.

Electrochemical immunosensing of tumor markers

The rising incidence and mortality rates of cancer have led to a growing need for precise and prompt early diagnostic approaches to effectively combat this disease. However, traditional methods employed for detecting tumor cells, such as histopathological and immunological techniques, are often associated with complex procedures, high analytical expenses, elevated false positive rates, and a dependence on experienced personnel. Tracking tumor markers is recognized as one of the most effective approaches for early detection and prognosis of cancer. While onco-biomarkers can also be produced in normal circumstances, their concentration is significantly elevated when tumors are present. By monitoring the levels of these markers, healthcare professionals can obtain valuable insights into the presence, progression, and response to treatment of cancer, aiding in timely diagnosis and effective management. This review aims to provide researchers with a comprehensive overview of the recent advancements in tumor markers using electrochemical immunosensors. By highlighting the latest developments in this field, researchers can gain a general understanding of the progress made in the utilization of electrochemical immunosensors for detecting tumor markers. Furthermore, this review also discusses the current limitations associated with electrochemical immunosensors and offers insights into paving the way for further improvements and advancements in this area of research.

Photoelectrochemical quenching-recovery biosensor based on NSCQDs/Fe2O3@Bi2S3 for the detection of trypsin

BACKGROUND

The content of trypsin will change when pancreatic diseases occur, therefore developing a high-performance method for trypsin detection is of great significance for guiding patients on medication plans and improving their prognosis. Photoelectrochemical (PEC) analysis techniques have emerged as a solution to apply for bioassays.

RESULTS

Herein, the Fe2O3@Bi2S3 and Nitrogen and sulfur co-doped carbon quantum dots (NSCQDs) were successfully synthesized by a hydrothermal method. Subsequently, NSCQDs/Fe2O3@Bi2S3 with a photocurrent amplification effect covered on fluorine-doped tin oxide (FTO) electrode as the substrate material and apoferritin (APO) as a bio-recognition element to quench the photocurrent of the substrate material which can be excited with light. Due to the decomposition specifically between APO and trypsin, the photocurrent response increased. The linear range for trypsin detection showed satisfied results from 2 to 1000 ng mL-1 under optimal conditions, with a detection limit of 0.42 ng mL-1 and a recovery rate of 97.41 %-103.02 %, enabling efficient quantitative analysis of trypsin.

SIGNIFICANCE

In this experiment, a PEC biosensor with simple operation, low detection limit, excellent selectivity and strong stability was successfully prepared, enabling quantitative analysis of trypsin in human serum samples through the quenching-recovery mechanism. It holds great significance for diagnosis and serves as a practical method for the detection of trypsin in the future.

2D Z-scheme ZnIn2S4/g-C3N4 heterojunction based on photoelectrochemical immunosensor with enhanced carrier separation for sensitive detection of CEA

Semiconducting materials based on photoelectrochemical (PEC) sensors have been widely utilized for detection. Meanwhile, the sensitivity of the PEC sensor was limited by low-efficiency carrier separation. Thus, a novel sandwich-type PEC bioimmunosensing based on 2D Z-scheme ZnIn2S4/g-C3N4 heterojunction as a photosensitive material and BiVO4 as a photoquencher was designed for the sensitive detection of carcinoembryonic antigen (CEA). Firstly, the 2D ZnIn2S4/g-C3N4 structure provided a multitude of activated sites which facilitated the loading of the capture antibody (Ab1). Secondly, the Z-scheme heterojunction had a high redox capacity while promoting the rapid separation and migration of photogenerated electron-hole pairs (e-/h+). Thus it was able to consume more electron donors to a certain extent, resulting in a higher initial photocurrent. In addition, BiVO4 with large spatial potential resistance was introduced for the first time to realize signal amplification. BiVO4 could not only compete with substrate materials for electron donors, but also effectively prevent electron donors from contacting the substrate, further reducing the photocurrent signal. Under optimized conditions, the sensor had a favorable detection range (0.0001-100 ng/mL) to CEA and a low detection limit of 0.03 pg/mL. With high specificity, excellent stability, and remarkable reproducibility, this sensor provided a new perspective for constructing accurate and convenient PEC immunosensor for bioanalysis and early disease diagnosisdisease diagnosis.

An electrochemical biosensor for T4 polynucleotide kinase activity assay based on host-guest recognition between phosphate pillar[5]arene@MWCNTs and thionine

T4 polynucleotide kinase helps with DNA recombination and repair. In this study, an electrochemical biosensor was developed for a T4 polynucleotide kinase activity assay and inhibitor screening based on phosphate pillar[5]arene and multi-walled carbon nanotube nanocomposites. The water-soluble pillar[5]arene was employed as the host to complex thionine guest molecules. The substrate DNA with a 5'-hydroxyl group initially self-assembled on the gold electrode surface through chemical adsorption of the thiol group, which was phosphorylated in the presence of T4 polynucleotide kinase. Titanium dioxide nanoparticles served as a bridge to link phosphorylated DNA and phosphate pillar[5]arene and multi-walled carbon nanotube composite due to strong phosphate-Ti4+-phosphate chemistry. Through supramolecular host-guest recognition, thionine molecules were able to penetrate the pillar[5]arene cavity, resulting in an enhanced electrochemical response signal. The electrochemical signal is proportional to the T4 polynucleotide kinase concentration in the range of 10-5 to 15 U mL-1 with a detection limit of 5 × 10-6 U mL-1. It was also effective in measuring HeLa cell lysate-related T4 polynucleotide kinase activity and inhibitor screening. The proposed method offers a unique sensing platform for kinase activity measurement, holding great potential in nucleotide kinase-target drug development, clinical diagnostics, and inhibitor screening.

An electrochemical biosensor for detection of T4 polynucleotide kinase activity based on host-guest recognition between phosphate pillar[5]arene and methylene blue

T4 polynucleotide kinase (T4 PNK) is an important DNA repair-related enzyme that plays a crucial role in DNA recombination, replication and damage repair. Herein, an electrochemical biosensor was developed for detection of T4 PNK activity and inhibitor screening based on supramolecular host-guest recognition between phosphate pillar (Dumitrache and McKinnon, 2017) [5] arene (PP5) and methylene blue (MB). The water-soluble PP5 employed as the host for complexation of MB guest molecules. The substrate DNA with 5'-hydroxyl group was first self-assembled on the gold electrode surface through the chemical adsorption of the thiol group, which was phosphorylated in the presence of T4 PNK and adenosine triphosphate (ATP). TiO2 served as a bridge to link phosphorylated DNA and PP5 via the robust phosphate-Ti4+-phosphate chemistry. The immobilized PP5 captured the MB on electrode surface via the supramolecular host-guest recognition interaction, resulting in an enhanced electrochemical response signal. The electrochemical signal is proportional to the T4 PNK concentration in the range of 2 × 10-4 to 5 U mL-1 with a detection limit of 1 × 10-4 U mL-1. It was also successfully used for PNK inhibitor screening and PNK activity assay in HeLa cell lysates sample. The proposed strategy provides a novel sensing platform for kinase activity assay and inhibitor screening, holding a great potential in clinical diagnostics, inhibitor screening, and nucleotide kinase-target drug discovery.

Isoniazide modified Ag nanoparticles triggered photothermal immunoassay for carcinoembryonic antigen detection

As the most well-known analytical tool, the thermometer has been extended to the field of biological analysis based on the photothermal effect. Herein, isoniazide modified Ag nanoparticles were prepared as nanolabels to build an immunoassay. The nanoparticles were characterized by transmission electron microscope (TEM), dynamic laser scattering (DLS), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR). When the target protein was present, the sandwich immunoassay was developed and the photothermal reaction was triggered by isoniazide modified Ag nanoparticles. As a reducing agent, isoniazide is used to transform phosphomolybdic acid hydrate into molybdenum blue solution. And molybdenum blue had good photothermal stability and high photothermal conversion efficiency. The temperature variation of molybdenum blue solution showed a positive correlation with the concentration of carcinoembryonic antigen (CEA). Thus, the target protein of CEA was quantitative detection by thermometer. The linear response range is 0.1 ng mL-1 to 40 ng mL-1, and the detection limit is 0.08 ng mL-1. Moreover, the proposed protocol had satisfactory selectivity, accuracy, and reproducibility.

An electrochemical biosensor for T4 polynucleotide kinase activity identification according to host-guest recognition among phosphate pillar[5]arene@palladium nanoparticles@reduced graphene oxide nanocomposite and toluidine blue

T4 polynucleotide kinase (T4 PNK) helps with DNA recombination and repair. In this work, a phosphate pillar[5]arene@palladium nanoparticles@reduced graphene oxide nanocomposite (PP5@PdNPs@rGO)-based electrochemical biosensor was created to identify T4 PNK activities. The PP5 used to complex toluidine blue (TB) guest molecules is water-soluble. With T4 PNK and ATP, the substrate DNA, which included a 5'-hydroxyl group, initially self-assembled over the gold electrode surface by chemical adsorption of the thiol units. Strong phosphate-Zr4+-phosphate chemistry allowed Zr4+ to act as a bridge between phosphorylated DNA and PP5@PdNPs@rGO. Through a supramolecular host-guest recognition connection, TB molecules were able to penetrate the PP5 cavity, where they produced a stronger electrochemical response. With a 5 × 10-7 U mL-1 detection limit, the electrochemical signal is linear in the 10-6 to 1 U mL-1 T4 PNK concentration range. It was also effective in measuring HeLa cell lysate-related PNK activities and screening PNK inhibitors. Nucleotide kinase-target drug development, clinical diagnostics, and screening for inhibitors all stand to benefit greatly from the suggested technology, which offers a unique sensing mechanism for kinase activity measurement.

Facile preparation of Ru nanoassemblies for electrochemical immunoassay of carcinoembryonic antigen in clinical serum

Abnormal expression of carcinoembryonic antigen (CEA) can be used for early diagnosis of various cancers (e.g. colorectal cancer, cervical carcinomas, and breast cancer). In this work, using l-cysteine-ferrocene-Ruthenium nanocomposites (L-Cys-Fc-Ru) to immobilize secondary antibody (Ab₂) and Au nanoparticles (NPs) as the substrate to ensure accurate capture of primary antibody (Ab₁), a signal-on sandwich-like biosensor was constructed in the presence of CEA. Specifically, Ru nanoassemblies (NAs) were first prepared by a facile one-step solvothermal approach as signal amplifiers for the electrical signal of Fc. Based on specific immune recognition, as the increase of CEA concentration, the content of L-Cys-Fc-Ru-Ab₂ captured on the electrode surface also increased, thus the signal of Fc gradually increased. Therefore, the quantitative detection of CEA can be realized according to the peak current of Fc. After a series of experiments, it was found that the biosensor has a wide detection range from 1.0 pg mL^-1 to 100.0 ng mL^-1 and a low detection limit down to 0.5 pg mL^-1, as well as good selectivity, repeatability and stability. Furthermore, satisfactory results were also obtained for the determination of CEA in serums, which were comparable to commercial electrochemiluminescence (ECL) method. The developed biosensor shows great potential in clinical applications.

Sensitive photoelectrochemical immunosensor for carcinoembryonic antigen detection based on copolymer of thiophene and thiophene-3-acetic acid modified phosphate-doped Bi2WO6

In this study, PO₄^3- doped Bi₂WO₆ (BWO-PO) was prepared by hydrothermal method, and then copolymer of thiophene and thiophene-3-acetic acid (P(Th-T3A)) was chemically deposited on the BWO-PO surface. The introduction of PO₄^3- created point defects, greatly improving the photoelectric catalytic performance of Bi₂WO₆; the copolymer semiconductor could form heterojunction with Bi₂WO₆ to promote the separation of photo-generated carriers, due to its proper band gap. Furthermore, the copolymer could enhance the light absorption ability and photo-electronic conversion efficiency. Hence, the composite had good photoelectrochemical properties. When it was combined with carcinoembryonic antibody through the interaction of -COOH groups of the copolymer and the end groups of antibody for constructing ITO-based PEC immunosensor, the resulting sensor exhibited superb response to carcinoembryonic antigen (CEA), with a wide linear range of 1 pg/mL-20 ng/mL, and a relatively low detection limit of 0.41 pg/mL. It also showed high anti-interference ability, stability, and simplicity. The sensor has been successfully applied to monitor the concentration of CEA in serum. The sensing strategy can also be applied to the detection of other markers by changing the recognition elements, hence it has good application potential.

Emerging Biosensing Methods to Monitor Lung Cancer Biomarkers in Biological Samples: A Comprehensive Review

Lung cancer is the most commonly diagnosed of all cancers and one of the leading causes of cancer deaths among men and women worldwide, causing 1.5 million deaths every year. Despite developments in cancer treatment technologies and new pharmaceutical products, high mortality and morbidity remain major challenges for researchers. More than 75% of lung cancer patients are diagnosed in advanced stages, leading to poor prognosis. Lung cancer is a multistep process associated with genetic and epigenetic abnormalities. Rapid, accurate, precise, and reliable detection of lung cancer biomarkers in biological fluids is essential for risk assessment for a given individual and mortality reduction. Traditional diagnostic tools are not sensitive enough to detect and diagnose lung cancer in the early stages. Therefore, the development of novel bioanalytical methods for early-stage screening and diagnosis is extremely important. Recently, biosensors have gained tremendous attention as an alternative to conventional methods because of their robustness, high sensitivity, inexpensiveness, and easy handling and deployment in point-of-care testing. This review provides an overview of the conventional methods currently used for lung cancer screening, classification, diagnosis, and prognosis, providing updates on research and developments in biosensor technology for the detection of lung cancer biomarkers in biological samples. Finally, it comments on recent advances and potential future challenges in the field of biosensors in the context of lung cancer diagnosis and point-of-care applications.

Pillar[5]arene-Derived Terpyridinepalladium(II) Complex: Synthesis, Characterization, and Application in Green Catalysis

Metal nanoparticle catalysts have attracted great interest because they possess high surface-to-volume ratios and exhibit a very large number of catalytically active sites per unit area. However, high surface-to-volume ratios will induce nanoparticle aggregates during the catalytic reactions, making them lose their catalytic activity. In this work, a monoterpyridine-unit-functionalized pillar[5]arene (TP5) was synthesized successfully, which can be used as anchoring sites for the controllable preparation of well-dispersed palladium nanoparticles [TP5/Pd(0) NPs]. The as-prepared TP5/Pd(0) NPs were fully characterized by X-ray photoelectron spectroscopy, transmission electron microscopy, and powder X-ray diffraction. Importantly, the ultrafine TP5/Pd(0) NPs are found to be excellent and reusable catalysts for the reduction of nitrophenols in aqueous solution.

Highly Sensitive Immunosensing of Carcinoembryonic Antigen Based on Gold Nanoparticles Dotted PB@PANI Core-Shell Nanocubes as a Signal Probe

Herein, a method was developed for the sensitive monitoring of carcinoembryonic antigen (CEA) by gold nanoparticles dotted prussian blue@polyaniline core-shell nanocubes (Au NPs/PB@PANI). First, a facile low-temperature method was used to prepare the uniform PB@PANI core-shell nanocubes with the assistance of PVP, where PB acted as the electron transfer mediator to provide electrochemical signals, and the PANI with excellent conductivity and desirable chemical stability not only played the role of a protective layer to prevent etching of PB in basic media but also effectively improved electron transfer. Importantly, to further enhance the electrical conductivity and biocompatibility of PB@PANI and to further enhance the electrochemical signal and capture a large amount of Ab₂, Au NPs were doped on the surface of PB@PANI to form Au NPs/PB@PANI nanocomposites. Subsequently, benefiting from the advantages of core-shell structure nanoprobes and gold-platinum bimetallic nanoflower (AuPt NF), a sandwich-type electrochemical immunosensor for CEA detection was constructed, which provided a wide linear detection range from 1.0 pg·mL^-1 to 100.0 ng·mL^-1 and a low detection limit of 0.35 pg·mL^-1 via DPV (at 3σ). Moreover, it displayed a satisfactory result when the core-shell structure nanoprobe-based immunosensor was applied to determine CEA in real human serum samples.

Engineering sensitive gas sensor based on MOF-derived hollow metal-oxide semiconductor heterostructures

Metal-organic frameworks (MOFs) derived hollow heterostructured metal oxide semiconductors (MOSs) are a class of functional porous materials exhibiting distinctive physiochemical properties. Owing to the unique advantages, including large specific surface, high intrinsic catalytic performance, abundant channels for facilitating electron transfer and mass transport, and strong synergistic effect between different components, MOF-derived hollow MOSs heterostructures can work as promising candidates for gas sensing, which have thus attracted increasing attention. Aiming to provide a deep understanding on the design strategy and MOSs heterostructure, this review presents a comprehensive overview on the advantages and applications of MOF-derived hollow MOSs heterostructures when they used n for the detection of toxic gases. In addition, a deep discussion about the perspective and challenge of this interesting field is also well organized, hoping to provide guidance for the future design and development of more accurate gas sensors.

An electrochemical immunosensor based on polyaniline microtubules and zinc gallinate for detection of human growth differentiation factor-15

The incidence rate of cardiovascular diseases (CVDs) remains high, and their mortality rate is significantly higher than that of other diseases. Growth differentiation factor-15 (GDF-15) is a recently developed biomarker for the early diagnosis and prognostic evaluation of CVDs because its concentration in serum increases substantially after a cardiovascular injury or an inflammatory reaction. In this study, a sandwich-type immunosensor was constructed for the sensitive detection of GDF-15. Specifically, peony-like zinc gallinate (ZnGa₂O₄) prepared using a hydrothermal method, which exhibits excellent electrocatalytic performance, was coupled with Au nanoparticles (NPs) to obtain golden-peony-like ZnGa₂O₄/Au NPs. They preserved the immune activity of GDF-15 antibody molecules and further enhanced the conductivity, thereby realizing additional signal amplification. Hollow polyaniline (PANI) microtubules decorated with Pd NPs were used as the sensing platform (PANI/Pd NPs). The hollow microtubules provided abundant active sites and considerably improved the electron-transfer rate. Under optimal conditions, a linear range and remarkably low detection limit of 100 fg mL^-1-10 ng mL^-1 and 42.23 fg mL^-1, respectively, were achieved. These experimental results indicate that the strategy reported herein can be adopted as a novel approach for the convenient and rapid detection of GDF-15.

PEC/Colorimetric Dual-Mode Lab-on-Paper Device via BiVO4/FeOOH Nanocomposite In Situ Modification on Paper Fibers for Sensitive CEA Detection

A dual-mode lab-on-paper device based on BiVO₄/FeOOH nanocomposites as an efficient generating photoelectrochemical (PEC)/colorimetric signal reporter has been successfully constructed by integration of the lab-on-paper sensing platform and PEC/colorimetric detection technologies for sensitive detection of carcinoembryonic antigen (CEA). Concretely, the BiVO₄/FeOOH nanocomposites were in situ synthesized onto the paper-working electrode (PWE) through hydrothermal synthesis of the BiVO₄ layer on cellulose fibers (paper-based BiVO₄) which were initially modified by Au nanoparticles for improving the conductivity of three dimensional PWE, and then the photo-electrodeposition of FeOOH onto the paper-based BiVO₄ to construct the paper-based BiVO₄/FeOOH for the portable dual-mode lab-on-paper device. The obtained nanocomposites with an FeOOH needle-like structure deposited on the BiVO₄ layer exhibits enhanced PEC response activity due to its effective separation of the electron-hole pair which could further accelerate the PEC conversion efficiency during the sensing process. With the introduction of CEA targets onto the surface of nanocomposite-modified PWE assisted by the interaction with the CEA antibody from a specific recognition property, a signal-off PEC signal state with a remarkable photocurrent response decreasing trend can be achieved, realizing the quantitative detection of CEA with the PEC signal readout mode. By means of a smart origami paper folding, the colorimetric signal readout is achieved by catalyzing 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue oxidized TMB in the presence of H₂O₂ due to the satisfied enzyme-like catalytic activity of the needle-like structure, FeOOH, thereby achieving the dual-mode signal readout system for the proposed lab-on-paper device. Under the optimal conditions, the PEC and colorimetric signals measurement were effectively carried out, and the corresponding linear ranges were 0.001-200 ng·mL^-1 and 0.5-100 ng·mL^-1 separately, with the limit of detection of 0.0008 and 0.013 ng·mL^-1 for each dual-mode. The prepared lab-on-paper device also presented a successful application in serum samples for the detection of CEA, providing a potential pathway for the sensitive detection of target biomarkers in clinical application.

Ultrahighly Sensitive Sandwich-Type Electrochemical Immunosensor for Selective Detection of Tumor Biomarkers

Herein, a novel sandwich-type immunosensor was designed using Pt nanoparticle-decorated SnS₂ nanoplates (Pt@SnS₂) as a matrix and N,B-doped Eu MOF (N,B-Eu MOF) nanospheres as a signal amplifier. In Pt@SnS₂, Pt nanoparticles (NPs) enhance the surface electron transport capability and electrochemiluminescence (ECL) performance of SnS₂ nanoplates. The dual "antenna" effect of 5-boronoisophthalic acid (5-bop) and 5-nitroisophthalic acid (5-nop) enables the N,B-Eu MOFs to show very good ECL performance at the cathode. In the presence of the target carcinoembryonic antigen (CEA), the sandwich-type immunosensor provides specific immune responses, and the ECL signal of the immunosensor is greatly amplified by the signal probe N,B-Eu MOFs. In view of the above, the immunosensor was successfully applied for highly sensitive and selective detection of CEA with a detection limit of 0.06 pg·mL^-1. This sensor exhibits high sensitivity and specificity, excellent stability, good reproducibility, and good practicability in real human serum.