Square wave voltammetric approach to leptin immunosensing and optimization of driving parameters with chemometrics

Nanomaterial-Coated Carbon-Fiber-Based Multicontact Array Sensors for In Vitro Monitoring of Serotonin Levels

In this study, we demonstrated the fabrication of multicontact hierarchical probes for the in vitro detection of serotonin levels. The basic three-dimensional (3D) bendable prototypes with 3 (C1), 6 (C2), or 9 (C3) contact surfaces were printed from polymeric resin via the digital light processing (DLP) technique. We chose ultrasonicated carbon fiber strands to transform these designs into multicontact carbon fiber electrodes (MCCFEs). The exposed carbon fiber (CF) surfaces were modified with aminopropyl alkoxysilane (APTMS), followed by the subsequent loading of palladium nanoclusters (PdNPs) to build active recording sites. CF functionalization with PdNPs was achieved by the wet chemical reduction of Pd(II) to Pd(0). The MCCFE configurations demonstrated an enhancement in the electroactive surface area and an improved voltammetric response toward 5-HT oxidation by increasing the points of the contacts (i.e., from C1 to C3). These MCCFEs are comparable to 3D-protruding electrodes as they can enable multipoint analyte detection. Along with the electrode patterns, morphological irregularities associated with both Pd-doped and undoped CFs supported the creation of proximal diffusion layers for facile mass transfer. Low detection limits of 0.8-10 nM over a wide concentration range, from 0.005 nM to 1 mM, were demonstrated. The MCCFE sensors had a relatively low standard deviation value of ∼2%. This type of sensitive and cost-effective electrochemical sensor may prove useful for collecting electrical impulses and long-term monitoring of 5-HT in vivo in addition to in vitro testing.

Evaluation of aptamer and molecularly imprinted polymers as a first hybrid sensor for leptin detection at femtogram levels

Selective and sensitive determination of macromolecules maintains its importance in diagnosing and determining diseases to protect human health. In this study, a hybrid sensor designed with dual recognition elements consisting of both aptamers (Apt) and molecularly imprinted polymers (MIPs) was carried out for the ultra-sensitive determination of Leptin. Firstly, the screen-printed electrode (SPE) surface was coated with platinum nanospheres (Pt NSs) and gold nanoparticles (Au NPs) to provide immobilization of the Apt[Leptin] complex on the surface. In the next step, the formed polymer layer around the complex using the electropolymerization of orthophenilendiamine (oPD) kept the Apt molecules on the surface more effectively. As expected, a synergistic effect occurred between the formed MIP cavities by removing Leptin from the surface and the embedded Apt molecules to fabricate a hybrid sensor. Under optimal conditions, responses in differential pulse voltammetry (DPV) currents showed a linear response over a wide concentration range from 1.0 fg/mL to 10.0 pg/mL with a limit of detection (LOD) of 0.31 fg/mL for Leptin detection. Moreover, the effectiveness of the hybrid sensor was assessed using real samples, such as human serum and plasma samples, and satisfactory recovery findings (106.2-109.0%) were found.

Antibody conjugated Au/Ir@Cu/Zn-MOF probe for bacterial lateral flow immunoassay and precise synergistic antibacterial treatment

Staphylococcus aureus is one of the most prevalent threats to public health. Rapid detection with high sensitivity and targeted killing is crucial to curb its spread. Herein, a metal-bearing nanocomposite, consisting of a bimetallic nanoparticle and a metal-organic framework (Au/Ir@Cu/Zn-MOF) was constructed. Upon conjugation with anti-S. aureus antibody, this nanocomposite (Ab-Au/Ir@Cu/Zn-MOF) was exploited for its dual functions, i.e. as a reporting probe in a lateral flow immunoassay and a high efficiency antibacterial reagent. Benefiting from the enrichment of Au/Ir NPs by the Cu/Zn-MOF, the Au/Ir@Cu/Zn-MOF-based lateral flow immunoassay sensor exhibited a visual limit of detection of 10³ CFU/mL, which was100 times more sensitive than Au/Ir-based sensor. Moreover, the Ab-Au/Ir@Cu/Zn-MOF probe possessed synergistic photothermal-chemodynamic bactericidal effect that specifically targeted against S. aureus. Under a co-treatment by H₂O₂ (0.4 mM) and 808 nm near infrared irradiation (1 W/cm², 5 min), complete sterilization of 5 × 10⁵-10⁶ CFU/mL S. aureus was achieved at a nanocomposite concentration as low as 6.25 μg/mL. The superior antibacterial efficiency was attributable to the three-fold properties of the Ab-Au/Ir@Cu/Zn-MOF probe: (1) enhanced multi-enzyme mimicking activities that promote reactive oxygen species generation, (2) high photothermal activity (efficiency of 53.70%), and (3) bacteria targeting ability via the antibody coating. By changing the antibody, this nanocomposite can be tailored to target a wide range of bacteria species, for detection and for precise antibacterial treatment.

Transdermal delivery via medical device technologies

INTRODUCTION

Despite their effectiveness and indispensability, many drugs are poorly solvated in aqueous solutions. Over recent decades, the need for targeted drug delivery has led to the development of pharmaceutical formulations with enhanced lipid solubility to improve their delivery properties. Therefore, a dependable approach for administering lipid-soluble drugs needs to be developed.

AREAS COVERED

The advent of 3D printing or additive manufacturing (AM) has revolutionized the development of medical devices, which can effectively enable the delivery of lipophilic drugs to the targeted tissues. This review focuses on the use of microneedles and iontophoresis for transdermal drug delivery. Microneedle arrays, inkjet printing, and fused deposition modeling have emerged as valuable approaches for delivering several classes of drugs. In addition, iontophoresis has been successfully employed for the effective delivery of macromolecular drugs.

EXPERT OPINION

Microneedle arrays, inkjet printing, and fused deposition are potentially useful for many drug delivery applications; however, the clinical and commercial adoption rates of these technologies are relatively low. Additional efforts is needed to enable the pharmaceutical community to fully realize the benefits of these technologies.