Plant protoplasts: status and biotechnological perspectives

A cell-based fluorescent system and statistical framework to detect meiosis-like induction in plants

Genetic gains made by plant breeders are limited by generational cycling rates and flowering time. Several efforts have been made to reduce the time to switch from vegetative to reproductive stages in plants, but these solutions are usually species-specific and require flowering. The concept of in vitro nurseries is that somatic plant cells can be induced to form haploid cells that have undergone recombination (creating artificial gametes), which can then be used for cell fusion to enable breeding in a Petri dish. The induction of in vitro meiosis, however, is the largest current bottleneck to in vitro nurseries. To help overcome this, we previously described a high-throughput, bi-fluorescent, single cell system in Arabidopsis thaliana, which can be used to test the meiosis-like induction capabilities of candidate factors. In this present work, we validated the system using robust datasets (>4M datapoints) from extensive simulated meiosis induction tests. Additionally, we determined false-detection rates of the fluorescent cells used in this system as well as the ideal tissue source for factor testing.

Advances in and Perspectives on Transgenic Technology and CRISPR-Cas9 Gene Editing in Broccoli

Broccoli, a popular international Brassica oleracea crop, is an important export vegetable in China. Broccoli is not only rich in protein, vitamins, and minerals but also has anticancer and antiviral activities. Recently, an Agrobacterium-mediated transformation system has been established and optimized in broccoli, and transgenic transformation and CRISPR-Cas9 gene editing techniques have been applied to improve broccoli quality, postharvest shelf life, glucoraphanin accumulation, and disease and stress resistance, among other factors. The construction and application of genetic transformation technology systems have led to rapid development in broccoli worldwide, which is also good for functional gene identification of some potential traits in broccoli. This review comprehensively summarizes the progress in transgenic technology and CRISPR-Cas9 gene editing for broccoli over the past four decades. Moreover, it explores the potential for future integration of digital and smart technologies into genetic transformation processes, thus demonstrating the promise of even more sophisticated and targeted crop improvements. As the field continues to evolve, these innovations are expected to play a pivotal role in the sustainable production of broccoli and the enhancement of its nutritional and health benefits.

Advances in Quercus ilex L. breeding: the CRISPR/Cas9 technology via ribonucleoproteins

The CRISPR/Cas9 ribonucleoprotein (RNP)-mediated technology represents a fascinating tool for modifying gene expression or mutagenesis as this system allows for obtaining transgene-free plants, avoiding exogenous DNA integration. Holm oak (Quercus ilex) has an important social, economic, and ecological role in the Mediterranean climate zones of Western Europe and North Africa and is severely affected by oak decline syndrome. Here we report the first example of the application of the CRISPR/Cas9-RNP technology in holm oak. Firstly, we evaluated the protoplast isolation from both in vitro leaves and proembryogenic masses. Proembryogenic masses represented the best material to get high protoplast yield (11 x 106 protoplasts/ml) and viability. Secondly, the protoplast transfection ability was evaluated through a vector expressing green fluorescence protein as marker gene of transfection, reaching a transfection percentage of 62% after 24 hours. CRISPR/Cas9 RNPs were successfully delivered into protoplasts resulting in 5.6% ± 0.5% editing efficiency at phytoene desaturase (pds) target genomic region. Protoplasts were then cultured in semisolid media and, after 45 days in culture, developed embryogenic calli were observed in a Murashige and Skoog media with half concentration of NH4NO3 and KNO3 supplemented with 0.1 mg/L benzylaminopurine and 0.1 mg/L 2,4-dichlorophenoxyacetic acid.

Editing of the ethylene biosynthesis gene in carnation using CRISPR-Cas9 ribonucleoprotein complex

The study aimed to edit ethylene (ET) biosynthesis genes [1-aminocyclopropane-1-carboxylic acid (ACC) synthetase 1 (ACS1) and ACC oxidase 1 (ACO1)] in carnation using the CRISPR/Cas9 ribonucleoprotein (RNP) complex system. Initially, the conserved regions of the target genes (ACS1 and ACO1) were validated for the generation of different single guide RNAs (sgRNAs), followed by the use of an in vitro cleavage assay to confirm the ability of the sgRNAs to cleave the target genes specifically. The in vitro cleavage assay revealed that the sgRNAs were highly effective in cleaving their respective target regions. The complex of sgRNA: Cas9 was directly delivered into the carnation protoplast, and the target genes in the protoplast were deep-sequenced. The results revealed that the sgRNAs were applicable for editing the ET biosynthesis genes, as the mutation frequency ranged from 8.8 to 10.8% for ACO1 and 0.2-58.5% for ACS1. When sequencing the target genes in the callus derived from the protoplasts transformed with sgRNA: Cas9, different indel patterns (+ 1, - 1, and - 8 bp) in ACO1 and (- 1, + 1, and + 11) in ACS1 were identified. This study highlighted the potential application of CRISPR/Cas9 RNP complex system in facilitating precise gene editing for ET biosynthesis in carnation.

Protoplast Isolation, Culture, and Regeneration in Common and Tartary Buckwheat

Techniques based on the use of plant protoplasts are a convenient model for better understanding and observing developmental changes in the cells. The establishment of research tools based on protoplasts consists of many steps needed for optimization. Here, we describe the culture of morphogenic callus (MC)- and hypocotyl-derived protoplasts of common (Fagopyrum esculentum Moench) and Tartary (F. tataricum (L.) Gaertn.) buckwheat. Protoplasts embedding in agarose matrix and application of plant hormones, including phytosulfokine (PSK), enable the development of protoplast cultures and plant regeneration.

A highly efficient protocol for isolation of protoplast from China, Assam and Cambod types of tea plants [Camellia sinensis (L.) O. Kuntze]

BACKGROUND

Tea is the most popular beverage worldwide second only to water. Its demand is tremendously rising due to increased awareness of its medicinal importance. The quality and uses of tea depend on the tea-types which are mainly three types including China, Assam and Cambod type having distinct compositions of secondary metabolites. Huge variation in secondary metabolites in different tea-types and cultivars limited the successful application of various approaches used for its trait improvement. The efficiency of a protocol for isolation of protoplast is specific to the types and cultivars of tea plants. The existing tea protoplast-isolation protocols [which were optimized for tea-types (China and Assam type) and Chinese cultivars grown in China] were found ineffective on types/cultivars grown in India due to type/cultivar variability. Therefore, optimization of protoplast-isolation protocol is essential for tea-types/cultivars grown in India, as it is the second largest producer of tea and the largest producer of black tea. Here, efforts were made to develop an efficient protoplast-isolation protocol from all major types of tea (China, Assam and Cambod types) grown in India and also from three types of tender leaves obtained from field-grown, hydroponically-grown and tissue culture-grown tea plants.

RESULTS

Developed protoplast-isolation protocol was effective for different types of leaf tissue obtained from the tender leaves of field-grown, hydroponically-grown and tissue culture-grown tea plants. Moreover, optimized protocol effectively worked on all three types of tea including China, Assam and Cambod types cultivated in India. The digestion of leaves with 3% cellulase R-10, 0.6% macerozyme, 1% hemicellulase and 4% polyvinylpyrrolidone for 12 h at 28ºC yielded approximately 3.8-4.6 × 107 protoplasts per gram fresh tissue and 80-95% viability in selected tea cultivars, and tissue culture plant material was found most appropriate for protoplast isolation.

CONCLUSIONS

In conclusion, we reported an efficient protocol for isolation of protoplasts from tender tea leaves of all major tea-types (China, Assam and Cambod) grown in India. Moreover, the protocol is also effective for tender-leaf tissue of field-grown, hydroponically-grown and tissue culture-grown tea plants. The findings are expected to contribute to the genetic improvement of tea traits widely.

Integrated flow cytometric and proteomics analyses reveal the regulatory network underlying sugarcane protoplast responses to fusion

BACKGROUND

Somatic cell fusion is a process that transfers cytoplasmic and nuclear genes to create new germplasm resources. But our limited understanding of the physiological and molecular mechanisms that shape protoplast responses to fusion.

METHOD

We employed flow cytometry, cytology, proteomics, and gene expression analysis to examine the sugarcane (Saccharum spp.) protoplast fusion.

RESULTS

Flow cytometry analysis revealed the fusion rate of protoplasts was 1.95%, the FSC value and SSC of heterozygous cells was 1.17-1.47 times higher than that of protoplasts. The protoplasts viability decreased and the MDA increased after fusion. During fusion, the cell membranes were perforated to different degrees, nuclear activity was weakened, while microtubules depolymerized and formed several short rod like structures in the protoplasts. The most abundant proteins during fusion were mainly involved in RNA processing and modification, cell cycle control, cell division, chromosome partition, nuclear structure, extracellular structures, and nucleotide transport and metabolism. Moreover, the expression of key regeneration genes, such as WUS, GAUT, CESA, PSK, Aux/IAA, Cdc2, Cyclin D3, Cyclin A, and Cyclin B, was significantly altered following fusion.

PURPOSE AND SIGNIFICANCE

Overall, our findings provide a theoretical basis that increases our knowledge of the mechanisms underlying protoplast fusion.

Improvements in Protoplast Isolation Protocol and Regeneration of Different Cabbage (Brassica oleracea var. capitata L.) Cultivars

Protoplasts are a versatile tool in plant biotechnology since they can be used for basic biological studies as well as for breeding strategies based on genome editing. An efficient protoplast isolation protocol is essential for conducting protoplast-based studies. To optimize the protoplast isolation protocol in cabbage (Brassica oleracea var. capitata L.), different enzyme solutions were tested for the isolation of leaf mesophyll protoplasts. In our experiments, the combination of 0.5% Cellulase Onozuka RS and 0.1% Macerozyme R-10 showed the best result. The optimized protocol proved suitable for the isolation of protoplasts from five different cabbage cultivars with yields ranging from 2.38 to 4.63 × 106 protoplasts/g fresh weight (fw) and a viability of 93% or more. After three weeks in culture, protoplasts from all of the tested cultivars formed micro-calli, but further callus growth and shoot regeneration depended strongly on the genotype and regeneration protocol used. For shoot formation, 1 mg/L BAP in combination with auxin 0.2 mg/L NAA showed the best results with a regeneration of 23.5%. The results obtained will contribute to the development of different applications of cabbage protoplasts and facilitate the breeding process of this important horticultural crop.

Promotive effect of phytosulfokine - peptide growth factor - on protoplast cultures development in Fagopyrum tataricum (L.) Gaertn

BACKGROUND

Fagopyrum tataricum (Tartary buckwheat) is a valuable crop of great nutritional importance due to its high level of bioactive compounds. Excellent opportunities to obtain plants with the high level or the desired profile of valuable metabolites may be provided by in vitro cultures. Among known in vitro techniques, protoplast technology is an exciting tool for genetic manipulation to improve crop traits. In that context, protoplast fusion may be applied to generate hybrid cells between different species of Fagopyrum. To apply protoplast cultures to the aforementioned approaches in this research, we established the protoplast-to-plant system in Tartary buckwheat.

RESULTS

In this work, cellulase and pectinase activity enabled protoplast isolation from non-morphogenic and morphogenic callus (MC), reaching, on average, 2.3 × 106 protoplasts per g of fresh weight. However, to release protoplasts from hypocotyls, the key step was the application of driselase in the enzyme mixture. We showed that colony formation could be induced after protoplast embedding in agarose compared to the alginate matrix. Protoplasts cultured in a medium based on Kao and Michayluk supplemented with phytosulfokine (PSK) rebuilt cell walls, underwent repeated mitotic division, formed aggregates, which consequently led to callus formation. Plating efficiency, expressing the number of cell aggregate formed, in 10-day-old protoplast cultures varied from 14% for morphogenic callus to 30% for hypocotyls used as a protoplast source. However plant regeneration via somatic embryogenesis and organogenesis occurred only during the cultivation of MC-derived protoplasts.

CONCLUSIONS

This study demonstrated that the applied protoplast isolation approach facilitated the recovery of viable protoplasts. Moreover, the embedding of protoplasts in an agarose matrix and supplementation of a culture medium with PSK effectively stimulated cell division and further development of Tartary buckwheat protoplast cultures along with the plant regeneration. Together, these results provide the first evidence of developing a protoplast-to-plant system from the MC of Fagopyrum tataricum used as source material. These findings suggest that Tartary buckwheat's protoplast cultures have potential implications for the species' somatic hybridization and genetic improvement.

Cotyledon peeling method for passion fruit protoplasts: a versatile cell system for transient gene expression in passion fruit (Passiflora edulis)

Passion fruit (Passiflora edulis) is a perennial evergreen vine that grows mainly in tropical and subtropical regions due to its nutritional, medicinal and ornamental values. However, the molecular biology study of passion fruit is extremely hindered by the lack of an easy and efficient method for transformation. The protoplast transformation system plays a vital role in plant regeneration, gene function analysis and genome editing. Here, we present a new method ('Cotyledon Peeling Method') for simple and efficient passion fruit protoplast isolation using cotyledon as the source tissue. A high yield (2.3 × 107 protoplasts per gram of fresh tissues) and viability (76%) of protoplasts were obtained upon incubation in the enzyme solution [1% (w/v) cellulase R10, 0.25% (w/v) macerozyme R10, 0.4 M mannitol, 10 mM CaCl2, 20 mM KCl, 20 mM MES and 0.1% (w/v) BSA, pH 5.7] for 2 hours. In addition, we achieved high transfection efficiency of 83% via the polyethylene glycol (PEG)-mediated transformation with a green fluorescent protein (GFP)-tagged plasmid upon optimization. The crucial factors affecting transformation efficiency were optimized as follows: 3 μg of plasmid DNA, 5 min transfection time, PEG concentration at 40% and protoplast density of 100 × 104 cells/ml. Furthermore, the established protoplast system was successfully applied for subcellular localization analysis of multiple fluorescent organelle markers and protein-protein interaction study. Taken together, we report a simple and efficient passion fruit protoplast isolation and transformation system, and demonstrate its usage in transient gene expression for the first time in passion fruit. The protoplast system would provide essential support for various passion fruit biology studies, including genome editing, gene function analysis and whole plant regeneration.

Development of a protoplast isolation system for functional gene expression and characterization using petals of Camellia Oleifera

Protoplasts preparation and purification have been frequently used in plant genetics and breeding studies, whereas application of protoplasts in woody plants is still in its infancy. Although transient gene expression using purified protoplasts is well-documented and widely used in model plants and agriculture crops, no instance of either stable transformation or transient gene expression in the woody plant Camellia Oleifera has as of yet been reported. Here, we developed a protoplast preparation and purification method using C. oleifera petals by optimizing osmotic condition with D-mannitol and polysaccharide-degrading enzyme concentrations for petal cell wall digestion, to reach a high efficiency of protoplast productivity and viability. The achieved protoplasts yield was approximately 1.42 × 107 cells per gram of petal material and the viability of protoplasts was up to 89%. In addition, we explored influencing factors of protoplast transformation, including concentrations of PEG4000 and plasmid DNA. The transformation efficiency of 81% could be reached under the optimized condition. This protoplast isolation and transient expression system were deployed to further identify the functional regulation of C. oleifera related genes and the subcellular distribution of their encoded products. In summary, the protoplast isolation and transient expression system we established using oil-tea tree petals is an efficient, versatile and time-saving system, being suitable for gene function characterization and molecular mechanism analysis.

Galactoglucomannan oligosaccharides mitigate cadmium toxicity in maize protoplasts by improving viability and cell wall regeneration

To avoid human health endangerment via the food chain, the investigation of Cd's effects on plant growth and development, and the discovery of various compounds that would mitigate the toxic effects of Cd, are essential. Galactoglucomannan oligosaccharides (GGMOs) are biologically active compounds, which improve the growth and development of plants. Therefore, the impact of GGMOs on the mitigation of Cd toxicity on maize (Zea mays L.) protoplasts was the main objective of this research. Here, protoplast viability, de novo cell wall regeneration on protoplasts' surface and Cd-uptake by protoplasts were studied. To study the influence of different treatments over time, the protoplasts were sampled on various days during the 14-day-long cultivation. The medium containing 2,4-dichlorophenoxyacetic acid, 6-benzylaminopurine, and GGMOs in a 10-9 M concentration with a pH of 3.8 was found to be optimal for protoplast cultivation. The toxic effect of Cd2+, which was evident already on the 2nd day of cultivation, resulted in decreased protoplast viability, the de novo cell wall regeneration, and in increased Cd-uptake. However, the application of GGMOs on Cd-stressed protoplasts increased cell wall regeneration. Fully or partly regenerated cell walls decreased the uptake of Cd2+ through the plasma membrane and improved protoplast viability. This is the first study that confirmed that biologically active oligosaccharides promote cell wall regeneration on the protoplast surface in both non-stress and Cd-stress conditions.

An efficient method for protoplast-mediated production of transformed castor bean (Ricinus communis) lines

OBJECTIVE

The purpose of this study was to develop a method for the isolation, culture, and PEG-mediated protoplast transfection from leaves of in vitro-grown plants of Ricinus communis.

RESULTS

Factors such as the enzymatic composition and the incubation time were evaluated. The enzymatic solution, containing 1.6% Cellulase-R10 and 0.8% Macerozyme-R10, with 16 h of incubation, was the best condition to achieve a high protoplast yield (481.16 × 10⁴ protoplasts/g FW) with a high percentage of viability (95%). The combination and concentration of enzymes have been shown to affect the protoplast isolation efficiency significantly. Furthermore, we found that a higher number of protoplasts (8.5 × 10⁵ protoplast/g FW) was obtained at a longer incubation time, but their viability decreased. We obtained a simple and efficient protocol to isolate protoplast from Ricinus communis leaves and culture. A PEG-mediated protoplast transfection protocol was also established to introduce plasmid DNA into Ricinus communis genotypes cultivated in Colombia. Thus, strengthening advances in the genetic improvement processes for this crop are presented.

Overcoming roadblocks for in vitro nurseries in plants: induction of meiosis

Efforts to increase genetic gains in breeding programs of flowering plants depend on making genetic crosses. Time to flowering, which can take months to decades depending on the species, can be a limiting factor in such breeding programs. It has been proposed that the rate of genetic gain can be increased by reducing the time between generations by circumventing flowering through the in vitro induction of meiosis. In this review, we assess technologies and approaches that may offer a path towards meiosis induction, the largest current bottleneck for in vitro plant breeding. Studies in non-plant, eukaryotic organisms indicate that the in vitro switch from mitotic cell division to meiosis is inefficient and occurs at very low rates. Yet, this has been achieved with mammalian cells by the manipulation of a limited number of genes. Therefore, to experimentally identify factors that switch mitosis to meiosis in plants, it is necessary to develop a high-throughput system to evaluate a large number of candidate genes and treatments, each using large numbers of cells, few of which may gain the ability to induce meiosis.

Direct leaf-peeling method for areca protoplasts: a simple and efficient system for protoplast isolation and transformation in areca palm (Areca catechu)

BACKGROUND

Areca palm (Areca catechu) is a woody perennial plant of both economical and medicinal importance grown in tropical and subtropical climates. Yet, the molecular biology study of areca palm is extremely impeded by its unavailability of a transformation method. An efficient protoplast isolation and transformation system could be highly desirable to overcome this barrier.

RESULTS

Here, we described a simple and efficient method for protoplast isolation and transformation from the perennial plant areca palm. A high yield of protoplasts (2.5 × 10⁷ protoplasts per gram of fresh leaf tissues) was obtained from the fresh light green leaflet from the newly-emerged leaf digested overnight in the enzyme solution [2% (w/v) cellulase R10, 0.5% (w/v) macerozyme R10, 0.7 M mannitol, 10 mM CaCl₂, 20 mM KCl, 20 mM MES and 0.1% (w/v) BSA, pH 5.7] by the direct leaf-peeling method. The isolated areca protoplasts maintain viability of 86.6% and have been successfully transformed with a green fluorescent protein (GFP)-tagged plasmid (pGreen0029-GFP, 6.0 kb) via the polyethylene glycol (PEG)-mediated transformation. Moreover, the mannitol concentration (optimal: 0.7 M) was determined as a key factor affecting areca protoplast isolation. We also demonstrated that the optimal density of areca protoplast for efficient transformation was at 1.0-1.5 × 10⁶ cells/ml. With the optimization of transformation parameters, we have achieved a relatively high transformation efficiency of nearly 50%.

CONCLUSION

We have established the first efficient protocol for the high-yield isolation and transformation of areca palm protoplasts. This method shall be applied in various biological studies of areca palm, such as gene function analysis, genome editing, protein trafficking and localization and protein-protein interaction. In addition, the protoplast system offers a great genetic transformation approach for the woody perennial plant-areca palm. Moreover, the established platform may be applied in protoplast isolation and transformation for other important species in the palm family, including oil palm and coconut.

Strategies for utilization of crop wild relatives in plant breeding programs

Crop wild relatives (CWRs) are weedy and wild relatives of the domesticated and cultivated crops, which usually occur and are maintained in natural forms in their centres of origin. These include the ancestors or progenitors of all cultivated species and comprise rich sources of diversity for many important traits useful in plant breeding. CWRs can play an important role in broadening genetic bases and introgression of economical traits into crops, but their direct use by breeders for varietal improvement program is usually not advantageous due to the presence of crossing or chromosome introgression barriers with cultivated species as well as their high frequencies of agronomically undesirable alleles. Linkage drag may subsequently result in unfavourable traits in the subsequent progeny when segments of the genome linked with quantitative trait loci (QTL), or a phenotype, are introgressed from wild germplasm. Here, we first present an overview in regards to the contribution that wild species have made to improve biotic, abiotic stress tolerances and yield-related traits in crop varieties, and secondly summarise the various challenges which are experienced in interspecific hybridization along with their probable solutions. We subsequently suggest techniques for readily harnessing these wild relatives for fast and effective introgression of exotic alleles in pre-breeding research programs.

Optimized methods for random and targeted mutagenesis in field pea (Pisum sativum L.)

Field pea is an important pulse crop for its dense nutritional profile and contribution to sustainable agricultural practices. Recently, it has received extensive attention as a potential leading source of plant-based proteins. However, the adoption of peas as a mainstream source of proteins is affected by a relatively moderate protein content, anti-nutritional factors and high levels of off-flavor components that reduce protein quality. Availability of genetic variation for desirable seed quality traits is the foundation for the sustainable development of pea varieties with improved protein content and quality. Mutagenesis has been an important tool in gene functional characterization studies and creating genetic variability for crop breeding. Large-scale mutagenesis of a crop using physical and chemical agents requires diligent selection of the mutagen and optimization of its dose to increase the frequency of mutations. In this study, we present detailed optimized protocols for physical and chemical mutagenesis of pea using gamma irradiation and ethyl methanesulfonate (EMS), respectively. Gamma radiation and EMS titration kill curves were established to identify optimal doses of the two mutagenic agents. Based on germination, survival rate and growth phenotypes, a gamma radiation dose of 225 Gy and EMS concentration of 5 mm were selected as optimal dosages for mutagenesis in field pea. The presented protocol has been modified from previously established mutagenesis protocols in other crop plants. Our results indicate that the optimal mutagen dosage is genotype dependent. CRISPR/Cas-based gene editing provides a precise and rapid method for targeted genetic manipulation in plants. With the recent success of gene editing in pea using CRISPR/Cas, this innovative technology is expected to become an integral component of the gene discovery and crop improvement toolkit in pea. Here, we describe an optimized methods for targeted mutagenesis of pea protoplasts, including mesophyll protoplast extraction, PEG-mediated transformation and gene editing of a LOX gene using CRISPR/Cas system. The general strategies and methods of mutagenesis described here provide an essential resource for mutation breeding and functional genomics studies in pea. These methods also provide a foundation for similar studies in other crops.

Advances in protoplast transfection promote efficient CRISPR/Cas9-mediated genome editing in tetraploid potato

An efficient method of DNA-free gene-editing in potato protoplasts was developed using linearized DNA fragments, UBIQUITIN10 promoters of several plant species, kanamycin selection, and transient overexpression of the BABYBOOM transcription factor. Plant protoplasts represent a reliable experimental system for the genetic manipulation of desired traits using gene editing. Nevertheless, the selection and regeneration of mutated protoplasts are challenging and subsequent recovery of successfully edited plants is a significant bottleneck in advanced plant breeding technologies. In an effort to alleviate the obstacles related to protoplasts' transgene expression and protoplasts' regeneration, a new method was developed. In so doing, it was shown that linearized DNA could efficiently transfect potato protoplasts and that UBIQUITIN10 promoters from various plants could direct transgene expression in an effective manner. Also, the inhibitory concentration of kanamycin was standardized for transfected protoplasts, and the NEOMYCIN PHOSPHOTRANSFERASE2 (NPT2) gene could be used as a potent selection marker for the enrichment of transfected protoplasts. Furthermore, transient expression of the BABYBOOM (BBM) transcription factor promoted the regeneration of protoplast-derived calli. Together, these methods significantly increased the selection for protoplasts that displayed high transgene expression, and thereby significantly increased the rate of gene editing events in protoplast-derived calli to 95%. The method developed in this study facilitated gene-editing in tetraploid potato plants and opened the way to sophisticated genetic manipulation in polyploid organisms.

Tissue Culture and Somatic Embryogenesis in Warm-Season Grasses—Current Status and Its Applications: A Review

Warm-season grasses are C4 plants and have a high capacity for biomass productivity. These grasses are utilized in many agricultural production systems with their greatest value as feeds for livestock, bioethanol, and turf. However, many important warm-season perennial grasses multiply either by vegetative propagation or form their seeds by an asexual mode of reproduction called apomixis. Therefore, the improvement of these grasses by conventional breeding is difficult and is dependent on the availability of natural genetic variation and its manipulation through breeding and selection. Recent studies have indicated that plant tissue culture system through somatic embryogenesis complements and could further develop conventional breeding programs by micropropagation, somaclonal variation, somatic hybridization, genetic transformation, and genome editing. This review summarizes the tissue culture and somatic embryogenesis in warm-season grasses and focus on current status and above applications including the author’s progress.

An integrated physiology, cytology, and proteomics analysis reveals a network of sugarcane protoplast responses to enzymolysis

The protoplast experimental system eis an effective tool for functional genomics and cell fusion breeding. However, the physiological and molecular mechanisms of protoplast response to enzymolysis are not clear, which has become a major obstacle to protoplast regeneration. Here, we used physiological, cytological, proteomics and gene expression analysis to compare the young leaves of sugarcane and enzymolized protoplasts. After enzymatic digestion, we obtained protoplasts with viability of > 90%. Meanwhile, the content of malondialdehyde, an oxidation product, increased in the protoplasts following enzymolysis, and the activity of antioxidant enzymes, such as peroxidase (POD), catalase (CAT), acid peroxidase (APX), and O^2-, significantly decreased. Cytologic analysis results showed that, post enzymolysis, the cell membranes were perforated to different degrees, the nuclear activity was weakened, the nucleolus structure was not obvious, and the microtubules depolymerized and formed several short rod-like structures in protoplasts. In this study, a proteomics approaches was used to identify proteins of protoplasts in response to the enzymatic digestion process. GO, KEGG, and KOG enrichment analyses revealed that the abundant proteins were mainly involved in bioenergetic metabolism, cellular processes, osmotic stress, and redox homeostasis of protoplasts, which allow for protein biosynthesis or degradation. RT-qPCR analysis revealed that the expression of osmotic stress resistance genes, such as DREB, WRKY, MAPK4, and NAC, was upregulated, while that of key regeneration genes, such as CyclinD3, CyclinA, CyclinB, Cdc2, PSK, CESA, and GAUT, was significantly downregulated in the protoplasts. Hierarchical clustering and identification of redox proteins and oxidation products showed that these proteins were involved in dynamic networks in response to oxidative stress after enzymolysis. Our findings can facilitate the development of a standard system to produce regenerated protoplasts using molecular markers and antibody detection of enzymolysis.

Protoplast Isolation and Transfection in the Single-Cell C4 Species Bienertia sinuspersici

We have developed an optimized protocol for isolating protoplasts from chlorenchyma cells of the single-cell C₄ species Bienertia sinuspersici. The isolated protoplasts maintained the integrity of the unique single-cell C₄ intracellular compartmentation of organelles as observed in chlorenchyma cells after cell wall digestion. Approximately over 80% of isolated protoplasts expressed the fusion reporter gene following the polyethylene glycol-mediated transfection procedures. Overall, fluorescent protein fusion tagged with various intraorganellular sorting signals validated the potential use of the transient gene expression system in subcellular localization and organelle dynamics studies.

Establishing an efficient protoplast transient expression system for investigation of floral thermogenesis in aroids

Floral thermogenesis is an important reproductive strategy for attracting pollinators. We developed essential biological tools for studying floral thermogenesis using two species of thermogenic aroids, Symplocarpus renifolius and Alocasia odora. Aroids contain many species with intense heat-producing abilities in their inflorescences. Several genes have been proposed to be involved in thermogenesis of these species, but biological tools for gene functional analyses are lacking. In this study, we aimed to develop a protoplast-based transient expression (PTE) system for the study of thermogenic aroids. Initially, we focused on skunk cabbage (Symplocarpus renifolius) because of its ability to produce intense as well as durable heat. In this plant, leaf protoplasts were isolated from potted and shoot tip-cultured plants with high efficiency (ca. 1.0 × 10⁵/g fresh weight), and more than half of these protoplasts were successfully transfected. Using this PTE system, we determined the protein localization of three mitochondrial energy-dissipating proteins, SrAOX, SrUCPA, and SrNDA1, fused to green fluorescent protein (GFP). These three GFP-fused proteins were localized in MitoTracker-stained mitochondria in leaf protoplasts, although the green fluorescent particles in protoplasts expressing SrUCPA-GFP were significantly enlarged. Finally, to assess whether the PTE system established in the leaves of S. renifolius is applicable for floral tissues of thermogenic aroids, inflorescences of S. renifolius and another thermogenic aroid (Alocasia odora) were used. Although protoplasts were successfully isolated from several tissues of the inflorescences, PTE systems worked well only for the protoplasts isolated from the female parts (slightly thermogenic or nonthermogenic) of A. odora inflorescences. Our developed system has a potential to be widely used in inflorescences as well as leaves in thermogenic aroids and therefore may be a useful biological tool for investigating floral thermogenesis.

Protoplast Isolation and Transformation in Oil Palm

The protocol outlined in this chapter describes a detailed procedure for protoplast isolation and transformation using polyethylene glycol (PEG)-mediated transfection and DNA microinjection, highlighting also the critical steps associated with the method. Briefly, we will describe the efficient isolation of protoplasts from 3-month-old suspension calli collected at 14 days after cultured. Digestion of the calli with an optimal composition of enzyme solution yielded over 2 × 10⁶ protoplasts/mL with the viability of more than 80%. The concentrations of DNA, PEG, and magnesium chloride and application of heat shock treatment are the crucial determinants for efficient PEG-mediated transfection. Using the optimal PEG transfection conditions, a transfection efficiency of more than 20% could be obtained. At the same time, protoplasts embedded in alginate layer cultured for 3 days and injected with 100 ng/μL of total DNA solution are the optimal factors for microinjection. We successfully regenerated the injected protoplasts to calli expressing green fluorescent protein (GFP) signals when cultured in optimal medium and cultivation procedures.

Magnetic Immobilization and Growth of Nannochloropsis oceanica and Scenedasmus almeriensis

Microalgae are used in industrial and pharmaceutical applications. Their performance on biological applications may be improved by their immobilization. This study presents a way of cell immobilization using microalgae carrying magnetic properties. Nannochloropsis oceanica and Scenedasmus almeriensis cells were treated enzymatically (cellulase) and mechanically (glass beads), generating protoplasts as a means of incorporation of magnetic nanoparticles. Scanning electron microscopy images verified the successful cell wall destruction for both of the examined microalgae cells. Subsequently, protoplasts were transformed with magnetic nanoparticles by a continuous electroporation method and then cultured on a magnetic surface. Regeneration of transformed protoplasts was optimized using various organic carbon and amino acid supplements. Both protoplast preparation methods demonstrated similar efficiency. Casamino acids, as source of amino acids, were the most efficient compound for N. oceanica protoplasts regeneration in enzymatic and mechanical treatment, while for S. almeriensis protoplasts regeneration, fructose, as source of organic carbon, was the most effective. Protoplasts transformation efficiency values with magnetic nanoparticles after enzymatic or mechanical treatments for N. oceanica and S. almeriensis were 17.8% and 10.7%, and 18.6% and 15.7%, respectively. Finally, selected magnetic cells were immobilized and grown on a vertical magnetic surface exposed to light and without any supplement.

Establishment of an Efficient Protoplast Regeneration and Transfection Protocol for Field Cress (Lepidium campestre)

Field cress (Lepidium campestre) is a potential oilseed crop that has been under domestication in recent decades. CRISPR/Cas9 is a powerful tool for rapid trait improvement and gene characterization and for generating transgene-free mutants using protoplast transfection system. However, protoplast regeneration remains challenging for many plant species. Here we report an efficient protoplast regeneration and transfection protocol for field cress. Important factors such as type of basal media, type/combination of plant growth regulators, and culture duration on different media were optimized. Among the basal media tested, Nitsch was the best for protoplast growth in MI and MII media. For cell wall formation during the early stage of protoplast growth, relatively high auxin concentrations (0.5 mg L⁻¹ NAA and 2,4-D), without addition of cytokinin was preferred for maintaining protoplast viability. After cell wall formation, 1.1 mg L⁻¹ TDZ combined with either 0.05 mg L⁻¹ NAA or 2,4-D was found to efficiently promote protoplast growth. On solid shoot induction medium, 1.1 mg L⁻¹ TDZ without any auxin resulted in over 80% shoot generation frequency. A longer culture duration in MI medium would inhibit protoplast growth, while a longer culture duration in MII medium significantly delayed shoot formation. Using this optimized protoplast regeneration protocol, we have established an efficient PEG-mediated transfection protocol using a vector harboring the GFP gene, with transfection efficiencies of 50–80%. This efficient protoplast protocol would facilitate further genetic improvement of field cress via genome editing, and be beneficial to development of protoplast regeneration protocols for related plant species.

Tissue Regeneration with Hydrogel Encapsulation: A Review of Developments in Plants and Animals

Hydrogel encapsulation has been widely utilized in the study of fundamental cellular mechanisms and has been shown to provide a better representation of the complex in vivo microenvironment in natural biological conditions of mammalian cells. In this review, we provide a background into the adoption of hydrogel encapsulation methods in the study of mammalian cells, highlight some key findings that may aid with the adoption of similar methods for the study of plant cells, including the potential challenges and considerations, and discuss key findings of studies that have utilized these methods in plant sciences.

Protoplast isolation from Dictyopteris pacifica and Scytosiphon lomentaria, using a simple commercial enzyme preparation

BACKGROUND

Protoplasts (i.e., naked plant cells) can be used for in vitro manipulations and genetic improvement in cultivars with economic value. During the last decade, protoplast research in economic brown algae has been scarce, and it is usually hampered by the use of non-commercial enzymes or crude extracts for isolating protoplasts. Dictyopteris pacifica is part of a brown algal genus well known by its wide chemical diversity and biological properties. Scytosiphon lomentaria is an edible brown seaweed with antioxidant, antitumor, and antiviral properties. So far, there are no protoplast isolation protocols using commercial enzymes for these two economic brown algae. In this study, we obtained protoplasts from cultured samples of D. pacifica and S. lomentaria using commercially available enzymes. Additionally, we investigated the effects of Driselase inclusion and Ca-chelation pre-treatment on protoplast yields in order to optimize the conditions for protoplast preparations.

RESULTS

Protoplasts were isolated from Dictyopteris pacifica and Scytosiphon lomentaria using the commercially available Cellulase Onozuka RS (1%) and Alginate lyase (4 U mL-1), and short incubation time (4 h). Driselase did not show significant effects on protoplast production in both species. Ca-chelation pre-treatment only increased the number of protoplasts in D. pacifica. Under optimal conditions, the protoplast yields from D. pacifica and S. lomentaria were 4.83 ± 2.08 and 74.64 ± 32.49 × 106 protoplasts g-1 fresh weight, respectively. The values obtained for S. lomentaria were 2-3 orders of magnitude higher than previously reported.

CONCLUSIONS

Our results show that high protoplast yields can be obtained from D. pacifica and S. lomentaria using a simple mixture of commercial enzymes (Cellulase RS and Alginate lyase) and short incubation time (4 h). This work also represents the first report of protoplast isolation in D. pacifica. The method proposed here can help to expand protoplast technology in more brown algal species.

Protoplasts: From Isolation to CRISPR/Cas Genome Editing Application

In the clustered regulatory interspaced short palindromic repeats (CRISPR)/CRISPR associated protein (Cas) system, protoplasts are not only useful for rapidly validating the mutagenesis efficiency of various RNA-guided endonucleases, promoters, sgRNA designs, or Cas proteins, but can also be a platform for DNA-free gene editing. To date, the latter approach has been applied to numerous crops, particularly those with complex genomes, a long juvenile period, a tendency for heterosis, and/or self-incompatibility. Protoplast regeneration is thus a key step in DNA-free gene editing. In this report, we review the history and some future prospects for protoplast technology, including protoplast transfection, transformation, fusion, regeneration, and current protoplast applications in CRISPR/Cas-based breeding.

Efficient isolation and purification of tissue-specific protoplasts from tea plants (Camellia sinensis (L.) O. Kuntze)

BACKGROUND

Plant protoplasts constitute unique single-cell systems that can be subjected to genomic, proteomic, and metabolomic analysis. An effective and sustainable method for preparing protoplasts from tea plants has yet to be established. The protoplasts were osmotically isolated, and the isolation and purification procedures were optimized. Various potential factors affecting protoplast preparation, including enzymatic composition and type, enzymatic hydrolysis duration, mannitol concentration in the enzyme solution, and iodixanol concentration, were evaluated.

RESULTS

The optimal conditions were 1.5% (w/v) cellulase and 0.4-0.6% (w/v) macerozyme in a solution containing 0.4 M mannitol, enzymatic hydrolysis over 10 h, and an iodixanol concentration of 65%. The highest protoplast yield was 3.27 × 10⁶ protoplasts g^-1 fresh weight. As determined through fluorescein diacetate staining, maximal cell viability was 92.94%. The isolated protoplasts were round and regularly shaped without agglomeration, and they were less than 20 μm in diameter. Differences in preparation, with regard to yield and viability in the tissues (roots, branches, and leaves), cultivars, and cultivation method, were also observed.

CONCLUSIONS

In summary, we reported on a simple, efficient method for preparing protoplasts of whole-organ tissue from tea plant. The findings are expected to contribute to the rapid development of tea plant biology.

Efficient Protoplast Regeneration Protocol and CRISPR/Cas9-Mediated Editing of Glucosinolate Transporter (GTR) Genes in Rapeseed (Brassica napus L.)

Difficulty in protoplast regeneration is a major obstacle to apply the CRISPR/Cas9 gene editing technique effectively in research and breeding of rapeseed (Brassica napus L.). The present study describes for the first time a rapid and efficient protocol for the isolation, regeneration and transfection of protoplasts of rapeseed cv. Kumily, and its application in gene editing. Protoplasts isolated from leaves of 3-4 weeks old were cultured in MI and MII liquid media for cell wall formation and cell division, followed by subculture on shoot induction medium and shoot regeneration medium for shoot production. Different basal media, types and combinations of plant growth regulators, and protoplast culture duration on each type of media were investigated in relation to protoplast regeneration. The results showed that relatively high concentrations of NAA (0.5 mg l^-1) and 2,4-D (0.5 mg l^-1) in the MI medium were essential for protoplasts to form cell walls and maintain cell divisions, and thereafter auxin should be reduced for callus formation and shoot induction. For shoot regeneration, relatively high concentrations of cytokinin were required, and among all the combinations tested, 2.2 mg l^-1 TDZ in combination with auxin 0.5 mg l^-1 NAA gave the best result with up to 45% shoot regeneration. Our results also showed the duration of protoplast culture on different media was critical, as longer culture durations would significantly reduce the shoot regeneration frequency. In addition, we have optimized the transfection protocol for rapeseed. Using this optimized protocol, we have successfully edited the BnGTR genes controlling glucosinolate transport in rapeseed with a high mutation frequency.

A robust and practical CRISPR/crRNA screening system for soybean cultivar editing using LbCpf1 ribonucleoproteins

KEY MESSAGE

Calli protoplasts isolated from three soybean cultivars are useful tools to evaluate guide RNAs for clustered regularly interspaced short palindromic repeats (CRISPR)-based precise gene editing. A type V CRISPR effector, LbCpf1(Cas12a) from Lachnospiraceae bacterium ND 2006, has been used for precision editing of the plant genome. We report that callus-derived protoplasts from three soybeans, including Glycine Max var. Williams 82 and two Korean cultivars (Kwangan and Daewon) represent efficient systems for the screening of active crRNA for CRISPR/LbCpf1. CRISPR/LbCpf1 ribonucleoproteins (RNPs) were delivered as complexes of purified endonucleases mixed with designed crRNA to simultaneously edit target genes of GlymaFAD2-1A and GlymaFAD2-1B transfected into three soybean protoplasts including genome-sequenced Williams 82 with cultivars, Kwangan and Daewon. Previously, we reported that nine crRNAs designed for LbCpf1 exhibited varying degrees of editing efficacy for two FAD2 genes. Among the nine crRNAs, the LbCpf1-crRNA3 complexes showed the highest efficiency in soybean cotyledon protoplasts. The new screening systems of callus protoplasts from three soybeans have been successfully used to transfect GFP-tagged markers and CRISPR/LbCpf1 RNPs. The callus protoplasts confirm that the LbCpf1-crRNA3 complex is an active crRNA for LbCpf1 to edit two FAD2 genes similar to cotyledon protoplasts. These results demonstrate that soybean callus protoplast-based CRISPR/crRNA selection is a new and practical tool to screen the efficacy of crRNAs and a prerequisite for progressive regeneration of the edited soybean.

Fluorescence activated cell sorting-A selective tool for plant cell isolation and analysis

Instrumentation for flow cytometry and sorting is designed around the assumption that samples are single-cell suspensions. However, with few exceptions, higher plants comprise complex multicellular tissues and organs, in which the individual cells are held together by shared cell walls. Single-cell suspensions can be obtained through digestion of the cells walls and release of the so-called protoplasts (plants without their cell wall). Here we describe best practices for protoplast preparation, and for analysis through flow cytometry and cell sorting. Finally, the numerous downstream applications involving sorted protoplasts are discussed.

Cell size: a key determinant of meristematic potential in plant protoplasts

Metabolic pathway reconstruction and gene edits for native natural product synthesis in single plant cells are considered to be less complicated when compared to the production of non-native metabolites. Being an efficient eukaryotic system, plants encompass suitable post-translational modifications. However, slow cell division rate and heterogeneous nature is an impediment for consistent product retrieval from plant cells. Plant cell synchrony can be attained in cultures developed in vitro. Isolated plant protoplasts capable of division, can potentially enhance the unimpaired yield of target bioactives, similar to microbes and unicellular eukaryotes. Evidence from yeast experiments suggests that 'critical cell size' and division rates for enhancement machinery, primarily depend on culture conditions and nutrient availability. The cell size control mechanisms in Arabidopsis shoot apical meristem is analogous to yeast notably, fission yeast. If protoplasts isolated from plants are subjected to cell size studies and cell cycle progression in culture, it will answer the underlying molecular mechanisms such as, unicellular to multicellular transition states, longevity, senescence, 'cell-size resetting' during organogenesis, and adaptation to external cues.

Flow Cytometry and Sorting in Arabidopsis

Flow cytometry and sorting represents a valuable and mature experimental platform for the analysis of cellular populations. Applications involving higher plants started to emerge around 40 years ago and are now widely employed both to provide unique information regarding basic and applied questions in the biosciences and to advance agricultural productivity in practical ways. Further development of this platform is being actively pursued, and this promises additional progress in our understanding of the interactions of cells within complex tissues and organs. Higher plants offer unique challenges in terms of flow cytometric analysis, first since their organs and tissues are, almost without exception, three-dimensional assemblies of different cell types held together by tough cell walls, and, second, because individual plant cells are generally larger than those of mammals.This chapter, which updates work last reviewed in 2014 [Galbraith DW (2014) Flow cytometry and sorting in Arabidopsis. In: Sanchez Serrano JJ, Salinas J (eds) Arabidopsis Protocols, 3rd ed. Methods in molecular biology, vol 1062. Humana Press, Totowa, pp 509-537], describes the application of techniques of flow cytometry and sorting to the model plant species Arabidopsis thaliana, in particular emphasizing (a) fluorescence labeling in vivo of specific cell types and of subcellular components, (b) analysis using both conventional cytometers and spectral analyzers, (c) fluorescence-activated sorting of protoplasts and nuclei, and (d) transcriptome analyses using sorted protoplasts and nuclei, focusing on population analyses at the level of single protoplasts and nuclei. Since this is an update, details of new experimental methods are emphasized.

Somaclonal Variation in Chrysanthemum × morifolium Protoplast Regenerants

Chrysanthemum × morifolium protoplasts were isolated and regenerated to assess possible protoclonal variation in the regenerants. After a preliminary screening of the potential of different regeneration systems for protoplast regeneration, we produced a series of cut chrysanthemum 'Arjuna' leaf protoplast regenerants through liquid culture. Regenerants (54) were vegetatively propagated and grown under a commercial production system in 2 different seasons. All screened regenerants were significantly affected with regard to either flower number, flower size, flower weight, leaf weight, stalk weight, or plant size. A significant plant size reduction in 43/52 and 48/49 regenerants for both seasons was the most recorded effect. Also a reduction in flowering induction time up to 10 days, altered flower types and colors were observed. Differences between growing seasons were notable. Possible molecular backgrounds including genome size variation and commercial applications in breeding of chrysanthemum are discussed.

Real-time detection of somatic hybrid cells during electrofusion of carrot protoplasts with stably labelled mitochondria

Somatic hybridisation in the carrot, as in other plant species, enables the development of novel plants with unique characteristics. This process can be induced by the application of electric current to isolated protoplasts, but such electrofusion requires an effective hybrid cell identification method. This paper describes the non-toxic fluorescent protein (FP) tagging of protoplasts which allows discrimination of fusion components and identification of hybrids in real-time during electrofusion. One of four FPs: cyan (eCFP), green (sGFP), yellow (eYFP) or the mCherry variant of red FP (RFP), with a fused mitochondrial targeting sequence, was introduced to carrot cell lines of three varieties using Agrobacterium-mediated transformation. After selection, a set of carrot callus lines with either GFP, YFP or RFP-labelled mitochondria that showed stable fluorescence served as protoplast sources. Various combinations of direct current (DC) parameters on protoplast integrity and their ability to form hybrid cells were assessed during electrofusion. The protoplast response and hybrid cell formation depended on DC voltage and pulse time, and varied among protoplast sources. Heterofusants (GFP + RFP or YFP + RFP) were identified by detection of a dual-colour fluorescence. This approach enabled, for the first time, a comprehensive assessment of the carrot protoplast response to the applied electric field conditions as well as identification of the DC parameters suitable for hybrid formation, and an estimation of the electrofusion success rate by performing real-time observations of protoplast fluorescence.

Incorporation of Magnetic Nanoparticles into Protoplasts of Microalgae Haematococcus pluvialis: A Tool for Biotechnological Applications

Intensive research on the use of magnetic nanoparticles for biotechnological applications of microalgae biomass guided the development of proper treatment to successfully incorporate them into these single-cell microorganisms. Protoplasts, as cells lacking a cell wall, are extensively used in plant/microalgae genetic manipulation as well as various biotechnological applications. In this work, a detailed study on the formation of protoplasts from Haematococcus pluvialis with the use of enzymatic and mechanical procedures was performed. The optimization of several parameters affecting the formation of protoplasmic cells and cell recovery was investigated. In the enzymatic treatment, a solution of cellulase was studied at different time points of incubation, whereas in the mechanical treatment, glass beads vortexing was used. Mechanical treatment gave better results in comparison to the enzymatic one. Concerning the cell recovery, after the protoplast formation, it was found to be similar in both methods used; cell viability was not investigated. To enhance the protoplast cell wall reconstruction, different “recovery media” with an organic source of carbon or nitrogen were used. Cell morphology during all treatments was evaluated by electron microscopy. The optimal conditions found for protoplast formation and cell reconstruction were successfully used to produce Haematococcus pluvialis cells with magnetic properties.

Applying gene editing to tailor precise genetic modifications in plants

The ability to tailor alterations in genomes, including plant genomes, in a site-specific manner has been greatly advanced through approaches that reduced the complexity and time of genome sequencing along with development of gene editing technologies. These technologies provide a valuable foundation for studies of gene function, metabolic engineering, and trait modification for crop improvement. Development of genome editing methodologies began ∼20 years ago, first with meganucleases and followed by zinc finger nucleases, transcriptional activator-like effector nucleases and, most recently, clustered regulatory interspaced short palindromic repeat (CRISPR)-associated protein (Cas) (CRISPR/Cas), which is by far the most utilized method. The premise of CRISPR/Cas centers on the cleaving of one or both DNA strands by a Cas protein, an endonuclease, followed by mending of the DNA by repair mechanisms inherent in cells. Its user-friendly construct design, greater flexibility in targeting genomic regions, and cost-effective attributes have resulted in it being widely adopted and revolutionizing precise modification of the genomes of many organisms. Indeed, the CRISPR/Cas system has been utilized for gene editing in many plant species, including important food crops, such as maize, wheat, rice, and potatoes. This review summarizes the various approaches, including the most recent designs being used to make modifications from as small as a single-base-pair change to insertion of DNA fragments. On the gene expression level, strategies are presented that make it possible to knock out or modulate through activation and repression. Also discussed are prerequisites necessary for CRISPR/Cas-mediated editing as well as the current challenges.

Protoplast Isolation and Shoot Regeneration from Protoplast-Derived Callus of Petunia hybrida Cv. Mirage Rose

Despite the increasing use of protoplasts in plant biotechnology research, shoot regeneration from protoplasts remains challenging. In this study, we investigated the factors involved in protoplast isolation, callus induction, and shoot regeneration in Petunia hybrida cv. Mirage Rose. The following conditions were found to be most optimal for protoplast yield and viability: 0.6 M mannitol, 2.0% cellulase, and 6 h digestion time. A plating density of 10 × 10⁴ protoplasts/mL under osmoticum condition (0.58 M mannitol) showed high microcolony viability in liquid culture. The Kao and Michayluk medium was found to be appropriate for callus proliferation from microcalli under a 16-h light photoperiod. Calli cultured in Murashige and Skoog medium containing 1.0 mg/L 6-benzylaminopurine and 0.2 mg/L 3-indole butyric acid showed the highest shoot regeneration frequency and number of shoots obtained per explant. Random amplification of polymorphic DNA analysis showed that the protoplast-derived shoots exhibited the same banding patterns as those of donor plants. Collectively, these findings can contribute to solving problems encountered in protoplast isolation and shoot regeneration in other petunia cultivars and related species. As the protocol developed by us is highly reproducible, it can be applied in biotechnology research on P. hybrida cv. Mirage Rose.

Protoplast Isolation and Manipulation in the Unicellular Model Plant Penium margaritaceum

The unicellular freshwater green alga Penium margaritaceum has become a novel and valuable model organism for elucidating cell wall dynamics in plants. We describe a rapid and simple means for isolating protoplasts using commercial enzymes in a mannitol-based buffer. Protoplasts can be cultured and cell wall recovery can be monitored in sequentially diluted mannitol-based medium. We also describe an optimized protocol to prepare highly pure, organelle-free nuclei fractions from protoplasts using sucrose gradients. This technology provides a new and effective tool in Penium biology that can be used for analysis of cell wall polymer deposition, organelle isolation and characterization, and molecular research including genetic transformation and somatic hybridization.

From Single Cell to Plants: Mesophyll Protoplasts as a Versatile System for Investigating Plant Cell Reprogramming

Plants are sessile organisms that have a remarkable developmental plasticity, which ensures their optimal adaptation to environmental stresses. Plant cell totipotency is an extreme example of such plasticity, whereby somatic cells have the potential to form plants via direct shoot organogenesis or somatic embryogenesis in response to various exogenous and/or endogenous signals. Protoplasts provide one of the most suitable systems for investigating molecular mechanisms of totipotency, because they are effectively single cell populations. In this review, we consider the current state of knowledge of the mechanisms that induce cell proliferation from individual, differentiated somatic plant cells. We highlight initial explant metabolic status, ploidy level and isolation procedure as determinants of successful cell reprogramming. We also discuss the importance of auxin signalling and its interaction with stress-regulated pathways in governing cell cycle induction and further stages of plant cell totipotency.

Modeling of asymmetric division of somatic cell in protoplasts culture of higher plants

The key result of the work is the selection of factors for the cultivation of protoplasts of higher plants in vitro, which allowed induction of asymmetrical cell division during the first cell cycle phase. Gibberellin has been proved to be one of the main cofactors of asymmetric division of plant cells. The objects of research were plants of the following cultivars aseptically grown in hormone-free MS medium: tobacco (Nicotiana tabacum L.), SR-1 line; Arabidopsis thaliana var. columbia (L.) Heynh; potato (Solanum tuberosum L.), Zarevo cultivar; cultivated white head cabbage (Brassica oleraceae var. capitata L.) of the following varieties: Kharkivska zymnia, Ukrainska osin, Yaroslavna, Lika, Lesya, Bilosnizhka, Dithmarscher Früher, Iyunskarannya; rape (Brassica napus L.) of Shpat cultivar; winter radish (Raphanus sativus L.) of Odessa-5 cultivar. In experiments with mesophilic and hypocotyl protoplasts of the above-mentioned plant species it has been proved that short-term osmotic stress within 16–18 hours being combined with subsequent introduction of high doses of gibberellin GK3 (1 mg/L) into the modified liquid nutrient media TM and SW led to the occurrence of pronounced morphological traits of cytodifferentiation already at the initial stages of the development of mitotically active cells in a number of higher plants. Meanwhile, in all analyzed species, there was observed the division of the initial genetically homogeneous population of mitotically active cells into two types of asymmetric division: by the type of division of the mother cell into smaller daughter cells and by the type of the first asymmetric division of the zygotic embryo in planta. In this case, the first type of asymmetric division occurred during unusual cytomorphism of the mother cells: a pronounced heart-shaped form even before the first division, which is inherent in the morphology of somatic plant embryo in vitro at the heart-shaped stage. A particular study of the effect of osmotic stress influencing protoplasts of various cultivars of white cabbage, isolated from hypocotyls of 7–9 day etiolated seedlings, revealed quite a typical consistent pattern: the acquisition and maintenance of the axis of symmetry in growing microcolonies occurred without extra exogenous gibberellin (GK3), which was added to the nutrient medium earlier. While analyzing the effect of growth regulators on the formation of microcolonies with traits of structural organization, the conclusion was made regarding the commonality of the revealed morphogenetic reactions of cells within the culture of protoplasts of higher plants in vitro with similar reactions studied earlier on other plants, both in vitro and in planta. Modeling of asymmetric cell division in protoplast culture in vitro has become possible by carrying out a balanced selection of growth regulators as well as their coordinated application through time along with changes in osmotic pressure of a nutrient medium.

Charting the path to fully synthetic plant chromosomes

The concepts of synthetic biology have the potential to transform plant genetics, both in how we analyze genetic pathways and how we transfer that knowledge into useful applications. While synthetic biology can be applied at the level of the single gene or small groups of genes, this commentary focuses on the ultimate challenge of designing fully synthetic plant chromosomes. Engineering at this scale will allow us to manipulate whole genome architecture and to modify multiple pathways and traits simultaneously. Advances in genome synthesis make it likely that the initial phases of plant chromosome construction will occur in bacteria and yeast. Here I discuss the next steps, including specific ways of overcoming technical barriers associated with plant transformation, functional centromere design, and ensuring accurate meiotic transmission.

Composition of the Reconstituted Cell Wall in Protoplast-Derived Cells of Daucus is Affected by Phytosulfokine (PSK)

Phytosulfokine-α (PSK), a peptidyl plant growth factor, has been recognized as a promising intercellular signaling molecule involved in cellular proliferation and dedifferentiation. It was shown that PSK stimulated and enhanced cell divisions in protoplast cultures of several species leading to callus and proembryogenic mass formation. Since PSK had been shown to cause an increase in efficiency of somatic embryogenesis, it was reasonable to check the distribution of selected chemical components of the cell walls during the protoplast regeneration process. So far, especially for the carrot, a model species for in vitro cultures, it has not been specified what pectic, arabinogalactan protein (AGP) and extensin epitopes are involved in the reconstruction of the wall in protoplast-derived cells. Even less is known about the correlation between wall regeneration and the presence of PSK during the protoplast culture. Three Daucus taxa, including the cultivated carrot, were analyzed during protoplast regeneration. Several antibodies directed against wall components (anti-pectin: LM19, LM20, anti-AGP: JIM4, JIM8, JIM13 and anti-extensin: JIM12) were used. The obtained results indicate a diverse response of the used Daucus taxa to PSK in terms of protoplast-derived cell development, and diversity in the chemical composition of the cell walls in the control and the PSK-treated cultures.

Edit at will: Genotype independent plant transformation in the era of advanced genomics and genome editing

The combination of advanced genomics, genome editing and plant transformation biology presents a powerful platform for basic plant research and crop improvement. Together these advances provide the tools to identify genes as targets for direct editing as single base pair changes, deletions, insertions and site specific homologous recombination. Recent breakthrough technologies using morphogenic regulators in plant transformation creates the ability to introduce reagents specific toward their identified targets and recover stably transformed and/or edited plants which are genotype independent. These technologies enable the possibility to alter a trait in any variety, without genetic disruption which would require subsequent extensive breeding, but rather to deliver the same variety with one trait changed. Regulatory issues regarding this technology will predicate how broadly these technologies will be implemented. In addition, education will play a crucial role for positive public acceptance. Taken together these technologies comprise a platform for advanced breeding which is an imperative for future world food security.

A method using electroporation for the protein delivery of Cre recombinase into cultured Arabidopsis cells with an intact cell wall

Genome engineering in plants is highly dependent on the availability of effective molecular techniques. Despite vast quantities of research, genome engineering in plants is still limited in terms of gene delivery, which requires the use of infectious bacteria or harsh conditions owing to the difficulty delivering biomaterial into plant cells through the cell wall. Here, we describe a method that uses electroporation-mediated protein delivery into cultured Arabidopsis thaliana cells possessing an intact cell wall, and demonstrate Cre-mediated site-specific recombination. By optimizing conditions for the electric pulse, protein concentration, and electroporation buffer, we were able to achieve efficient and less-toxic protein delivery into Arabidopsis thaliana cells with 83% efficiency despite the cell wall. To the best of our knowledge, this is the first report demonstrating the electroporation-mediated protein delivery of Cre recombinase to achieve nucleic acid-free genome engineering in plant cells possessing an intact cell wall.

Efficient mesophyll protoplast isolation and development of a transient expression system for castor-oil plant (Ricinus communis L.)

INTRODUCTION

We investigated the main factors affecting the efficacy of protoplast isolation, including leaf-obtaining period, cutting shapes of leaf material, enzyme concentration, enzymolysis time, and centrifugal speed.

METHODS

Protoplast isolation was optimal on the condition of 20 days of leaf materials, 2-mm filament of leaves, 1.6% RS and 0.8% R-10, 80 min of enzymolysis, and 700 rpm of centrifugation, resulting in the best yield (1.19 X 106 protoplasts/g FW) and vitality (80.34%) of mesophyll protoplasts. The transient expression vector pGFPl with green fluorescent protein was transfected into the obtained protoplasts from castor by polyethylene glycol-mediated method with a transformation efficiency of 12.37%.

RESULTS

Moreover, the applicability of the system for studying the subcellular localization of Re FATA (an acyl-ACP thioesterase) was validated via the protoplast isolation and transient expression protocol in this study.

DISCUSSION

Collectively, the efficient mesophyll protoplast isolation and protoplast transient expression system facilitate to analyze the function of specific gene in castor (Ricinus communis L).