Process optimization for production and purification of a thermostable, organic solvent tolerant lipase from Acinetobacter sp. AU07

Gene cloning, IPTG-independent auto-induction and characterization of a novel hyperstable S9 prolyl oligopeptidase having lipolytic activity from Thermotoga naphthophila RKU-10T with applications

A hyperstable lipase from Thermotoga naphthophila (TnLip) was cloned and overexpressed as a soluble and active monomeric protein in an effectual mesophilic host system. Sequence study revealed that TnLip is a peptidase S9 prolyl oligopeptidase domain (acetyl esterase/lipase-like protein), belongs to alpha/beta (α/β)-hydrolase superfamily containing a well-conserved α/β-hydrolase fold and penta-peptide (GLSAG) motif. Various cultivation and induction strategies were applied to improve the heterologous expression and bacterial biomass, but TnLip intracellular activity was enhanced by 14.25- fold with IPTG-independent auto-induction approach after 16 h (26 °C, 150 rev min-1) incubation. Purified TnLip (35 kDa) showed peak activity at 85 °C in McIlvaine buffer (pH 7.0-8.0), and has great stability over a broad range of pH (5.0-10.0), and temperature (40-85 °C) for 8 h. TnLip exhibited prodigious resistance toward various commercial detergents, chemical additives, and salt. TnLip activity was improved by 170.51 %, 130.67 %, 127.42 %, 126.54 %, 126.61 %, 120.32 %, and 116.31 % with 50 % (v/v) of methanol, ethanol, n-butanol, isopropanol, acetone, glycerol, and acetic acid, respectively. Moreover, with 3.0 M of NaCl, and 10 mM of Ca2+, Mn2+, and Mg2+ TnLip activity was augmented by 210 %, 185.64 %, 152.03 %, and 116.26 %, respectively. TnLip has an affinity with various substrates (p-nitrophenyl ester and natural oils) but maximal hydrolytic activity was perceived with p-nitrophenyl palmitate (pNPP, 3600 U mg-1) and olive oil (1182.05 U mg-1). The values of Km (0.576 mM), Vmax (4216 μmol mg-1 min-1), VmaxKm-1 (7319.44 min-1), kcat (1106.74 s-1), and kcatKm-1 (1921.42 mM-1 s-1) were calculated using pNPP substrate. Additionally, TnLip degraded animals' fats and removed oil stains within 3 h and 5 min, respectively. All these features make halo-alkali-thermophilic TnLip as an auspicious contender for laundry detergents (cleaning bio-additive), fat degradation, wastewater treatment and endorse eco-friendly stewardship along with various other biotechnological applications.

Purification and characterization of extracellular lipase from a thermotolerant strain: Bacillus subtilis TTP-06

In current study, lipase from a thermotolerant Bacillus subtilis TTP-06 was purified in a stepwise manner by using ammonium sulfate precipitation and column chromatography. Thenceforth, it was subjected to sodium dodecyl sulfate- and native-polyacrylamide gel electrophoresis to check the homogeneity of the purified enzyme. The ideal substrate concentration, pH, temperature, reaction duration and lipase specificity were identified. With a yield of 11.02%, purified lipase displayed activity of 8.51 U/mg. Thenceforward, the homogeneously purified enzyme was considered to be a homo-dimer of 30 kDa subunits. Enzyme had Km and Vmax value of 9.498 mM and 19.92 mol mg-1 min-1, respectively. Additionally, the matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) method was used to investigate the purified lipase and estimate its 3-D structure, which revealed a catalytic triad of serine, aspartate and histidine.

Bati Butter as a Potential Substrate for Lipase Production by Aspergillus terreus NRRL-255

This study evaluated bati butter (Ouratea parviflora) as a substrate for lipase production by solid-state fermentation (SSF) using Aspergillus terreus NRRL-255. A gas chromatograph with a flame ionization detector determined the bati butter fatty acid profile. Lipase production and spore count were optimized using a 3² experimental design and evaluated using the response surface methodology. Moreover, the crude enzyme extract was evaluated against different pH, temperature, and activating and inhibitors reagents. Regarding the fatty acids identified, long-chain accounted for 78.60% of the total lipids. The highest lipase production was obtained at 35 °C and 120 h of fermentation, yielding 216.9 U g^-1. Crude enzyme extract presented more significant activity at 37 °C and pH 9. β-Mercaptoethanol increased the enzyme activity (113.80%), while sodium dodecyl sulfate inactivated the enzyme. Therefore, bati butter proved to be a potential substrate capable of inducing lipase production by solid-state fermentation.

A critical review on exploitation of agro-industrial biomass as substrates for the therapeutic microbial enzymes production and implemented protein purification techniques

Annually, a huge amount of waste is generated by the industries that use agricultural biomass. Researchers have looked into employing this cheap and renewable agro-biomass as a substrate for enzyme production via fermentation processes to meet the ever-increasing worldwide need. Although there are a number of sources for enzyme extraction, microbial sources have dominated industrial sectors due to their easy availability and rapid growth. Microbial enzymes are currently used in a variety of industries, including pharmaceuticals, food, biofuels, textiles, paper, detergents, and so on, and using these nutritious feedstocks not only reduces production costs but also helps to reduce environmental concerns. The present review focuses on the therapeutic microbial enzymes produced using different agro-industrial biomass as raw materials, with down-streaming techniques for obtaining a final pure product. Additionally, the article also discussed biomass pretreatment processes, including physical, chemical and biological. The type of pretreatment method to be used is mostly governed by the intended use of the major molecular components of biomass (cellulose, hemicelluloses and lignin). Finally, purification challenges are included. All of this information will be useful in the industrial synthesis of high-purity targeted enzymes if the crucial aspects that have been discussed are taken into account.

Evaluation of the Impact of Esterases and Lipases from the Circulatory System against Substrates of Different Lipophilicity

Esterases and lipases can process amphiphilic esters used as drugs and prodrugs and impact their pharmacokinetics and biodistribution. These hydrolases can also process ester components of drug delivery systems (DDSs), thus triggering DDSs destabilization with premature cargo release. In this study we tested and optimized assays that allowed us to quantify and compare individual esterase contributions to the degradation of substrates of increased lipophilicity and to establish limitations in terms of substrates that can be processed by a specific esterase/lipase. We have studied the impact of carbonic anhydrase; phospholipases A1, A2, C and D; lipoprotein lipase; and standard lipase on the hydrolysis of 4-nitrophenyl acetate, 4-nitrophenyl palmitate, DGGR and POPC liposomes, drawing structure–property relationships. We found that the enzymatic activity of these proteins was highly dependent on the lipophilicity of the substrate used to assess them, as expected. The activity observed for classical esterases was diminished when lipophilicity of the substrate increased, while activity observed for lipases generally increased, following the interfacial activation model, and was highly dependent on the type of lipase and its structure. The assays developed allowed us to determine the most sensitive methods for quantifying enzymatic activity against substrates of particular types and lipophilicity.

Statistical optimization of lipase production from oil mill effluent by Acinetobacter sp. KSPE71

The present study investigated the valorization of oil-rich residues of coconut oil mill effluent (COME) as a potential growth medium for the microbial production of extracellular lipase. The bacterial species isolated from oil mill effluent, Acinetobacter sp. KSPE71 was tested for its efficiency to grow and produce lipase in undiluted COME and 0.2 % yeast extract and 0.2 % NH4Cl sup-plemented COME. In this connection, the process parameters such as pH, temperature, agitation speed, and inoculum size were optimized to maximize the production using a central composite design in the Response surface methodology. At the optimized state of pH 7.5, 35 ?C, 150 rpm with 0.6 % inoculum size, a maximum of 3.95 U mL-1 activity was obtained, four-fold higher than the basal condition. At this stage, 73 % of the lipid content was degraded. The present work results imply that the oil mill effluent can be used as a cheaper production medium for lipase and the new isolate Acinetobacter sp. KSPE71 as a potential lipase producer. The degradation of oil waste along with the production of the valuable product has multiple advantages of cost reduction of lipase and environmental concern.

A Purified Alkaline and Detergent-Tolerant Lipase from Aspergillus fumigatus with Potential Application in Removal of Mustard Oil Stains from Cotton Fabric

In the present study, the lipase from Aspergillus fumigatus was purified which was found to be stable to commercial detergents and oxidising agents. A purification fold of 6.96 and yield of 11.03% were achieved when the enzyme was purified using Octyl Sepharose column chromatography. In presence of various oxidizing agents, the highest activity of lipase was 15.56 U/mg with hydrogen peroxide. Among various surfactants used, the maximum activity exhibited by lipase was with Tween 80. While studying the effect of various detergents, the highest activity of 9.3 U/mg was achieved with "Vanish" detergent. Wash performance was studied with various detergents out of which "Vanish" showed highest oil removal of 79%. Lipase from Aspergillus fumigatus possessed better stability with various surfactants and oxidizing agents. The results of this study have shown that the lipase from Aspergillus fumigatus along with detergent "Vanish" (0.7%) under optimized conditions (5 μg/ml lipase, 40°C wash temperature and 40 min wash duration) improved oil removal from cotton fabric stained with mustard oil by 84%.

Production strategies and biotechnological relevance of microbial lipases: a review

Lipases are enzymes that catalyze the breakdown of lipids into long-chain fatty acids and glycerol in oil-water interface. In addition, they catalyze broad spectrum of bioconversion reactions including esterification, inter-esterification, among others in non-aqueous and micro-aqueous milieu. Lipases are universally produced from plants, animals, and microorganisms. However, lipases from microbial origin are mostly preferred owing to their lower production costs, ease of genetic manipulation etc. The secretion of these biocatalysts by microorganisms is influenced by nutritional and physicochemical parameters. Optimization of the bioprocess parameters enhanced lipase production. In addition, microbial lipases have gained intensified attention for a wide range of applications in food, detergent, and cosmetics industries as well as in environmental bioremediation. This review provides insights into strategies for production of microbial lipases for potential biotechnological applications.

Characterization of a Stable Form of Carboxypeptidase G2 (Glucarpidase), a Potential Biobetter Variant, From Acinetobacter sp. 263903-1

Carboxypeptidase G2 (CPG2) is a bacterial enzyme widely used to detoxify methotrexate (MTX) and in enzyme/prodrug therapy for cancer treatment. However, several drawbacks, such as instability, have limited its efficiency. Herein, we have evaluated the properties of a putative CPG2 from Acinetobacter sp. 263903-1 (AcCPG2). AcCPG2 is compared with a CPG2 derived from Pseudomonas sp. strain RS-16 (PsCPG2), available as an FDA-approved medication called glucarpidase. After modeling AcCPG2 using the I-TASSER program, the refined model was validated by PROCHECK, VERIFY 3D and according to the Z score of the model. Using computational analyses, AcCPG2 displayed higher thermodynamic stability and a lower aggregation propensity than PsCPG2. AcCPG2 showed an optimum pH of 7.5 against MTX and was stable over a pH range of 5-10. AcCPG2 exhibited optimum activity at 50 °C and higher thermal stability at a temperature range of 20-70 °C compared to PsCPG2. The K_m value of the purified AcCPG2 toward folate and MTX was 31.36 µM and 44.99 µM, respectively. The V_max value of AcCPG2 for folate and MTX was 125.80 µmol/min/mg and 48.90  µmol/min/mg, respectively. Accordingly, thermostability and pH versatility makes AcCPG2 a potential biobetter variant for therapeutic applications.

Current perspectives for microbial lipases from extremophiles and metagenomics

Microbial lipases are most broadly used biocatalysts for environmental and industrial applications. Lipases catalyze the hydrolysis and synthesis of long acyl chain esters and have a characteristic folding pattern of α/β hydrolase with highly conserved catalytic triad (Serine, Aspartic/Glutamic acid and Histidine). Mesophilic lipases (optimal activity in neutral pH range, mesophilic temperature range, atmospheric pressure, normal salinity, non-radio-resistant, and instability in organic solvents) have been in use for many industrial biotransformation reactions. However, lipases from extremophiles can be used to design biotransformation reactions with higher yields, less byproducts or useful side products and have been predicted to catalyze those reactions also, which otherwise are not possible with the mesophilic lipases. The extremophile lipase perform activity at extremes of temperature, pH, salinity, and pressure which can be screened from metagenome and de novo lipase design using computational approaches. Despite structural similarity, they exhibit great diversity at the sequence level. This diversity is broader when lipases from the bacterial, archaeal, plant, and animal domains/kingdoms are compared. Furthermore, a great diversity of novel lipases exists and can be discovered from the analysis of the dark matter - the unexplored nucleotide/metagenomic databases. This review is an update on extremophilic microbial lipases, their diversity, structure, and classification. An overview on novel lipases which have been detected through analysis of the genomic dark matter (metagenome) has also been presented.

Lipase from Rhizopus oryzae R1: in-depth characterization, immobilization, and evaluation in biodiesel production

Background

Rhizopus species is among the most well-known lipase producers, and its enzyme is suitable for use in many industrial applications. Our research focuses on the production of lipase utilizing waste besides evaluating its applications.

Results

An extracellular lipase was partially purified from the culture broth of Rhizopus oryzae R1 isolate to apparent homogeneity using ammonium sulfate precipitation followed by desalting via dialysis. The partially purified enzyme was non-specific lipase and the utmost activity was recorded at pH 6, 40 °C with high stability for 30 min. The constants K_m and V_max, calculated from the Lineweaver-Burk plot, are 0.3 mg/mL and 208.3 U/mL, respectively. Monovalent metal ions such as Na⁺ (1 and 5 mM) and K⁺ (5 mM) were promoters of the lipase to enhance its activity with 110, 105.5, and 106.5%, respectively. Chitosan was used as a perfect support for immobilization via both adsorption and cross-linking in which the latter method attained immobilization efficiency of 99.1% and reusability of 12 cycles. The partially purified enzyme proved its ability in forming methyl oleate (biodiesel) through the esterification of oleic acid and transesterification of olive oil.

Conclusion

The partially purified and immobilized lipase from Rhizopus oryzae R1 approved excellent efficiency, reusability, and a remarkable role in detergents and biodiesel production.

Optimization of organic solvent-tolerant lipase production by Acinetobacter sp. UBT1 using deoiled castor seed cake

Organic solvent-tolerant lipase-producing microorganisms were isolated from petrol spilled soil. From ten morphologically distinct lipase-producing bacterial isolates, highest amount of lipase-producing isolate UBT1 was identified as Acinetobacter sp. using 16S rRNA gene sequencing (NCBI Accession No: MH879815). An increase in lipase production from 42 U/mL to 243 U/mL was obtained when different deoiled seed cakes were supplemented instead of olive oil in the medium. Further optimization of media components by the statistical approach assisted in discerning the main influencing media components and their optimum concentrations. Nine components glucose, castor seedcake, potassium nitrate, gum arabic, calcium chloride, magnesium sulphate, potassium di-hydrogen phosphate, dipotassium hydrogen phosphate, and ferric chloride were selected for Plackett-Burman design. The optimum concentrations of three significant selected components for the lipase production were found to be 0.025 gm% glucose, 0.002 gm% calcium chloride, and 0.2 gm% potassium di-hydrogen phosphate as determined by Response Surface Methodology. Increase in lipase production with 292.29 U/mL was achieved in the media containing optimized components and 2 gm% deoiled castor seed cake. Purification studies with ammonium sulphate precipitation, dialysis, and gel permeation chromatography resulted in 77.54% recovery with 5.77-fold partially purified lipase. The residual activity of lipase in 50 and 75% concentration of n-hexane among other solvents after 24 h was 105.05 and 90.42%, respectively, indicating its solvent tolerance. The present study reports the isolation of organic solvent-tolerant lipase-producing Acinetobacter sp. UBT1, optimization of the culture media for lipase production using the deoiled castor seed cake, and its partial purification.

Identification of a GDSL lipase from Streptomyces bacillaris and its application in the preparation of free astaxanthin

Astaxanthin shows multiple biological activities, but it is usually linked to different fatty acids and exists in the form of esters. The complexity of astaxanthin esters limits their application in the preparation of sophisticated drugs. Herein, a novel lipase from Streptomyces bacillaris that could hydrolyze astaxanthin esters, named OUC-Sb-lip12, was expressed in Bacillus subtilis. The active site of OUC-Sb-lip12 is probably composed of a dyad of Ser48 and His254, instead of a typical catalytic triad. The lipase was identified to be a GDSL hydrolase, and it showed highest activity at 45 °C and pH 9.0 (glycine-NaOH buffer). OUC-Sb-lip12 showed a good stability at its optimum temperature or a higher temperature, retaining 88.4% and 80.6% of its activity after incubating for 36 h at 45 °C and 55 °C, respectively. OUC-Sb-lip12 could effectively hydrolyze astaxanthin esters in Haematococcus pluvialis oil, generating free astaxanthin. Under the optimum conditions, 96.29% astaxanthin esters were hydrolyzed in 12 h. In addition, B.subtilis is a GRAS model strain and it could efficiently secrete lipase in 9 h, making the lipase potential for scale production of free astaxanthin, which could be further used in the preparation of specific astaxanthin esters with specific functions.

The use of response surface methodology for enhanced production of a thermostable bacterial lipase in a novel yeast system

A thermostable bacterial lipase from Geobacillus zalihae was expressed in a novel yeast Pichia sp. strain SO. The preliminary expression was too low and discourages industrial production. This study sought to investigate the optimum conditions for T1 lipase production in Pichia sp. strain SO. Seven medium conditions were investigated and optimized using Response Surface Methodology (RSM). Five responding conditions namely; temperature, inoculum size, incubation time, culture volume and agitation speed observed through Plackett-Burman Design (PBD) method had a significant effect on T1 lipase production. The medium conditions were optimized using Box-Behnken Design (BBD). Investigations reveal that the optimum conditions for T1 lipase production and Biomass concentration (OD₆₀₀) were; Temperature 31.76 °C, incubation time 39.33 h, culture volume 132.19 mL, inoculum size 3.64%, and agitation speed of 288.2 rpm with a 95% PI low as; 12.41 U/mL and 95% PI high of 13.65 U/mL with an OD₆₀₀ of; 95% PI low as; 19.62 and 95% PI high as; 22.62 as generated by the software was also validated. These predicted parameters were investigated experimentally and the experimental result for lipase activity observed was 13.72 U/mL with an OD₆₀₀ of 24.5. At these optimum conditions, there was a 3-fold increase on T1 lipase activity. This study is the first to develop a statistical model for T1 lipase production and biomass concentration in Pichia sp. Strain SO. The optimized production of T1 lipase presents a choice for its industrial application.

Identification and characterization of a polyurethanase with lipase activity from Serratia liquefaciens isolated from cold raw cow's milk

Lipases are associated with food spoilage and are also used in various biotechnological applications. In this study, we sought to purify, identify, and characterize a lipase from S. liquefaciens isolated from cold raw cow's milk. The lipase partially purified by ultrafiltration and gel filtration showed a specific activity of 2793 U/mg. By zymography, the enzyme presented approximately 65 kDa, and LC-MS/MS allowed the identification of a polyurethanase with a conserved domain of family I.3 lipase. The modeled and validated structure of polyurethanase was able to bind to different fatty acids and urethane by molecular docking. The polyurethanase showed optimum activity at pH 8.0 and 30 °C. In the presence of ions, activity was decreased, except for Ca²⁺, Mg²⁺, and Ba²⁺. Reducing agents did not alter the activity, while amino acid modifiers reduced enzyme activity. It is concluded that polyurethanase with lipase activity represents a potential enzyme for the deterioration of milk and dairy products, as well as a candidate for industrial applications.

Turning cacay butter and wheat bran into substrate for lipase production by Aspergillus terreus NRRL-255

Cacay oil and butter were evaluated as enzymatic inducers for lipase production from Aspergillus terreus NRRL-255 by solid-state fermentation (SSF). Initially, physicochemical characteristics of agro-industrial wastes were evaluated in order to identify a potential solid substrate for lipase production. Higher water absorption index (3.65 g H₂O/g substrate), adequate mineral content, great carbon source, and nitrogen concentration were factors that influenced the choice of wheat bran as a solid substrate. Cacay butter presented the highest lipolytic activity (308.14 U g^-1) in the screening of lipid inducer. Then, the effects of lipid inducer concentration (cacay butter), temperature, pH, moisture, and fermentation time were evaluated on process performance using multivariate statistical methodology. Under optimal conditions, the highest lipase activity observed was 2,867.18 U g^-1. Regarding the lipase characterization, maximum relative activity was obtained at pH 7.0 and at 35 °C. An inhibitory effect was observed for Ca²⁺, Mn²⁺, Zn²⁺, Fe²⁺, and Cu²⁺ ions. Lipase activity was increased with the reduction of sodium dodecyl sulfate (SDS) concentration and the increase of Triton X-100. Therefore, the use of wheat bran as a solid substrate combined with cacay butter demonstrated a substantial lipase production, indicating its biotechnological industrial potential.

The isolation and characterization of lipase from Carica papaya latex using zwitterion sodium lauroyl sarcosinate as agent

Most of industrial lipases are derived from microbial sources, following by a wide variety of plants. Among plant lipases, lipase from Carica papaya latex has been the focus of intense and growing research due to low cost, easy acceptance by consumers and its unique characteristics. This enzyme has been successfully applied for lipid modification and synthesis of some organic compounds. However, research for its molecular structure has been limited due to the difficulty to isolate the enzyme from the latex matrix. In this study, we suggested a modified approach using sodium lauroyl sarcosinate to solubilize the latex, then the protein was precipitated by ammonium sulphate. We also carried out the characterization of the lipase obtained from Carica papaya latex. The results showed that freeze-drying the fresh latex could improve significantly lipase activity of latex powder in comparison with sun-drying or oven-drying. The zwitterion sodium lauroyl sarcosinate could solubilize nearly 50% of the latex and the achieved supernatant exhibited great lipase activity. There was no need to use an organic solvent to delipidate the latex prior to solubilization with sodium lauroyl sarcosinate due to possible denaturation of enzymes. The proteins which were fractionally precipitated with 50 - 60%, 60 - 70% and 70 - 80% ammonium sulphate saturation showed lipolytic activity. The fraction from 50 - 60% saturation with the greatest mass was subjected to ion exchange chromatography, SDS electrophoresis and kinetic parameter determination. The results showed the presence of two proteins with molecular mass ranging from 35 kDa to 55 kDa and both presented lipase activity. The Km and Vmax of the lipase fraction from 50 - 60% saturation was 1.12 mM and 1.2 x 10-6 mM.min-1.mL-1 respectively. So, the freeze-drying of papaya latex could help to preserve its lipase activity and the usage of sodium lauroyl sarcosinate could improve the isolation of the lipase from the papaya latex and pave the way for research on the molecular structure of Carica papaya latex lipases.

Production and purification of an alkaline lipase from Bacillus sp. for enantioselective resolution of (±)-Ketoprofen butyl ester

The present study was conducted to purify lipase from indigenous Bacillus subtilis strain Kakrayal_1 (BSK-L) for enantioselective resolution of racemic-ketoprofen. The production of lipase (BSK-L) was optimized using Plackett-Burman and central composite design of response surface methodology (RSM). The optimized media containing olive oil (3.5%), MnSO4 (8 mM), CaCl2 (5 mM), peptone (20 g/l), pH (8), agitation (180 rpm) and temperature (37 °C) resulted in maximum lipase production of 7500 U/g of cell biomass. The lipase was purified using sequential method to an overall purification fold of 13% with 20% recovery, 882 U/mg specific activity and a molecular weight of 45 kDa. Optimal pH and temperature of purified lipase were found to be 8 and 37 °C, respectively. Furthermore, BSK-L displayed good stability with various organic solvents, surfactants and metal ions. K m and V max values of lipase were observed to be 2.2 mM and 6.67  mmoles of product formed/min/mg, respectively. The racemic ketoprofen butyl ester was hydrolyzed using lipase with 49% conversion efficiency and 69% enantiomeric excess (ee) which was superior to the commercially procured lipase (Candida antarctica lipase). Thus, this enzyme could be considered as a promising candidate for the pharmaceutical industry.

Production of lipolytic enzymes by bacteria isolated from biological effluent treatment systems

This work aimed to evaluate the production of lipolytic complexes, produced by microorganisms isolated from a biological treatment system of effluents from a hotel. To select the best lipolytic microorganism for use in biotechnological processes, we tested 45 bacterial isolates recovered from the raw effluent of the hotel's restaurant waste tank. Lipase production was assayed in culture medium supplemented with olive oil and rhodamine B, incubated at 25 °C and 30 °C for 24 h - 48 h. Results showed 22 isolates lipase producers. All isolates were inoculated on medium without yeast extract to select the ones with highest enzyme yields. Out of these, nine isolates showed high lipase activity. The strain with the larger halo was assayed in submerged culture using an orbital shaker and a bioreactor, with three different substrates (olive oil, grape seed oil, and canola oil). Isolate G40 identified as Acinetobacter baylyi was selected to run the production assays because it showed the best result in the solid medium. In the bioreactor, maximum lipase production was obtained after 12 h of culture with the three substrates evaluated: 0,358 U/mL.min-1 in olive oil, 0,352 U/mL.min-1 with grapeseed oil, and 0,348 U/mL.min-1 with canola oil.

Enhancing the stability of a carboxylesterase by entrapment in chitosan coated alginate beads

A carboxylesterase isolated from Aeromonas caviae MTCC 7725 was immobilized by entrapping it in chitosan coated calcium alginate beads. This was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FTIR). The activity of the native and immobilized enzyme was measured at various temperatures, pH levels, and organic solvents. The optimum temperature for activity of the native enzyme was found to be 40 °C and this increased to 50 °C on immobilization. The immobilized enzyme showed enhanced stability and high residual activity in various organic solvents as compared to the free enzyme. An environmentally benign approach was used for the synthesis of ethyl salicylate using the immobilized enzyme. The product obtained was confirmed by GC-MS. The kinetic parameters, such as K m and Vmax, were also determined for the native and immobilized enzyme. The immobilized enzyme retained 50% of its activity after vfie cycles. The immobilized enzyme retained 80% and 40% of its activity at 4 °C and at 37 °C, respectively, at the end of 40 days. The results obtained from our study show that the immobilized enzyme can serve as a robust catalyst for industrial applications.

Biophysical characterization of a recombinant lipase KV1 from Acinetobacter haemolyticus in relation to pH and temperature

Spectroscopic and calorimetric methods were employed to assess the stability and the folding aspect of a novel recombinant alkaline-stable lipase KV1 from Acinetobacter haemolyticus under varying pH and temperature. Data on far ultraviolet-circular dichroism of recombinant lipase KV1 under two alkaline conditions (pH 8.0 and 12.0) at 40 °C reveal strong negative ellipticities at 208, 217, 222 nm, implying its secondary structure belonging to a α + β class with 47.3 and 39.0% ellipticity, respectively. Results demonstrate that lipase KV1 adopts its most stable conformation at pH 8.0 and 40 °C. Conversely, the protein assumes a random coil structure at pH 4.0 and 80 °C, evident from a strong negative peak at ∼ 200 nm. This blue shift suggests a general decline in enzyme activity in conjunction with the partially or fully unfolded state that invariably exposed more hydrophobic surfaces of the lipase protein. The maximum emission at ∼335 nm for pH 8.0 and 40 °C indicates the adoption of a favorable protein conformation with a high number of buried tryptophan residues, reducing solvent exposure. Appearance of an intense Amide I absorption band at pH 8.0 corroborates an intact secondary structure. A lower enthalpy value for pH 4.0 over pH 8.0 and 12.0 in the differential scanning calorimetric data corroborates the stability of the lipase at alkaline conditions, while a low K_m (0.68 ± 0.03 mM) for tributyrin verifies the high affinity of lipase KV1 for the substrate. The data, herein offer useful insights into future structure-based tunable catalytic activity of lipase KV1.

Realm of Thermoalkaline Lipases in Bioprocess Commodities

For decades, microbial lipases are notably used as biocatalysts and efficiently catalyze various processes in many important industries. Biocatalysts are less corrosive to industrial equipment and due to their substrate specificity and regioselectivity they produced less harmful waste which promotes environmental sustainability. At present, thermostable and alkaline tolerant lipases have gained enormous interest as biocatalyst due to their stability and robustness under high temperature and alkaline environment operation. Several characteristics of the thermostable and alkaline tolerant lipases are discussed. Their molecular weight and resistance towards a range of temperature, pH, metal, and surfactants are compared. Their industrial applications in biodiesel, biodetergents, biodegreasing, and other types of bioconversions are also described. This review also discusses the advance of fermentation process for thermostable and alkaline tolerant lipases production focusing on the process development in microorganism selection and strain improvement, culture medium optimization via several optimization techniques (i.e., one-factor-at-a-time, surface response methodology, and artificial neural network), and other fermentation parameters (i.e., inoculums size, temperature, pH, agitation rate, dissolved oxygen tension (DOT), and aeration rate). Two common fermentation techniques for thermostable and alkaline tolerant lipases production which are solid-state and submerged fermentation methods are compared and discussed. Recent optimization approaches using evolutionary algorithms (i.e., Genetic Algorithm, Differential Evolution, and Particle Swarm Optimization) are also highlighted in this article.

Microbial assisted industrially important multiple enzymes from fish processing waste: purification, characterization and application for the simultaneous hydrolysis of lipid and protein molecules

Fish processing waste (FPW) was evaluated as the substrate for the concomitant production of industrially important alkaline lipase and protease byStreptomyces thermolineatusfor the hydrolysis of lipid and protein rich FPW.