Study of differential properties of fibrochondrocytes and hyaline chondrocytes in growing rabbits

Thermo-Responsive Hydrogels: From Recent Progress to Biomedical Applications

Thermogels are also known as thermo-sensitive or thermo-responsive hydrogels and can undergo a sol-gel transition as the temperature increases. This thermogelling behavior is the result of combined action from multiscale thermo-responsive mechanisms. From micro to macro, these mechanisms can be attributed to LCST behavior, micellization, and micelle aggregation of thermogelling polymers. Due to its facile phase conversion properties, thermogels are injectable yet can form an in situ gel in the human body. Thermogels act as a useful platform biomaterial that operates at physiological body temperatures. The purpose of this review is to summarize the recent progress in thermogel research, including investigations on the thermogel gelation mechanism and its applications in drug delivery, 3D cell culture, and tissue engineering. The review also discusses emerging directions in the study of thermogels.

A bilayered scaffold with segregated hydrophilicity-hydrophobicity enables reconstruction of goat hierarchical temporomandibular joint condyle cartilage

Temporomandibular joint (TMJ) supports chewing, talking or other daily oral activities. So far, it still remains a great challenge to treat the defected TMJ condyle cartilage through tissue engineering technology. Herein, a bilayered scaffold is designed to fully reconstruct the different cartilage matrices of TMJ condyle under same induction condition. The bilayered scaffold with segregated hydrophobicity-hydrophilicity in top and bottom layer is prepared from a low and high content of polyethylene glycol (PEG) crosslinked poly (L-glutamic acid)-g-polycaprolactone (PLGA-g-PCL). The hydrophobic aggregates in top layer support the adhesion and spread of bone mesenchymal stem cells (BMSCs), thus inducing the differentation towards fibrocartilage; while aggregates (spheroids) are formed on the hydrophlic bottom layer, showing a preferable hyaline differentiation pathway under same chondrogenic induction in vitro. After 14 d in vitro induction, the scaffold/BMSCs construct is implanted in goat TMJ condyle defects. The post-operative outcome after 2 months demonstrates that the defects are fully covered by neo-cartilage. And the regenerated hierarchical TMJ condyle cartilage perfectly consist of ordered fibrocartilage and hyaline cartilage, which is same as natural condyle cartilage. These results corroborate that this bilayered scaffold with segregated hydrophilicity-hydrophobicity carrying induced BMSCs is a promising for treatment of TMJ condyle cartilage defects.

Injectable dual cross-linked adhesive hyaluronic acid multifunctional hydrogel scaffolds for potential applications in cartilage repair

A double crosslinked hydrogels was designed and prepared by combining the Diels–Alder click reaction and possessed good mechanical strength, injectability and adhesion.

Growth pattern and physiological characteristics of the temporomandibular joint studied by histological analysis and static mechanical pressure loading testing

OBJECTIVE

The aim of this study was to investigate the age-related changes in the articular disc, condyle, condylar fibrocartilage, and subchondral bone of the temporomandibular joint (TMJ) in rabbits.

METHODS

Female New Zealand white rabbit aged 1, 4, 12, and 32 weeks were obtained. Each age group comprised 5 rabbits and was subjected to chondrocyte culture, histological assessment of the articular disc length, assessment of the anteroposterior diameter of the condyle, measurement of the fibrocartilage thickness, and assessment of the subchondral bone architecture. The production of Collagen, type II, alpha1 (COL2A1); SOX9; Collagen, type X, alpha1 (COL10A1); and Runt-related transcription factor 2 (Runx2) was detected via western blot. Six rabbits at the ages of 12 and 32 weeks were sacrificed for the mechanical pressure loading test (75 kPa, 3 days). Changes in the condyles after pressurization were observed via scanning electron microscopy and evaluated by micro-CT.

RESULTS

Significant enlargement of the condyle occurred from 4 to 12 weeks of age (p = 0.003); however, the length of the articular disc increased significantly from 1 to 12 weeks of age (p < 0.005). A rapid decrease in the cartilage thickness but an increase in the subchondral bone density occurred from 1 to 4 weeks of age and from 4 to 32 weeks of age in rabbit, respectively (p < 0.05). The expressions of COL2A1 and SOX9 gradually decreased from 1 to 32 weeks of age. The protein expressions of COL10A1 and Runx2 were maintained at a high level at 4-12 weeks of age. After static mechanical pressure loading, the damage and reduction in the bone mineral density (BMD) in the12-week-old group was greater than those in the 32-week-old group.

CONCLUSIONS

An inconsistency between the condyle and articular disc during growth and development may be a causal factor for temporomandibular disorders TMDs in adolescents. Our findings suggest that the response of the adult condyle to the mechanical pressure is significantly greater than that of the adolescent condyle; however, with regard to reconstruction, the situation is reversed, which may influence the pathological progress of TMDs.

Osteochondral Regeneration Induced by TGF-β Loaded Photo Cross-Linked Hyaluronic Acid Hydrogel Infiltrated in Fused Deposition-Manufactured Composite Scaffold of Hydroxyapatite and Poly (Ethylene Glycol)-Block-Poly(ε-Caprolactone)

The aim of this study was to report the fabrication of porous scaffolds with pre-designed internal pores using a fused deposition modeling (FDM) method. Polycaprolactone (PCL) is a suitable material for the FDM method due to the fact it can be melted and has adequate flexural modulus and strength to be formed into a filament. In our study, the filaments of methoxy poly(ethylene glycol)-block-poly(ε-caprolactone) having terminal groups of carboxylic acid were deposited layer by layer. Raw materials having a weight ratio of hydroxyapatite (HAp) to polymer of 1:2 was used for FDM. To promote cell adhesion, amino groups of the Arg-Gly-Asp(RGD) peptide were condensed with the carboxylic groups on the surface of the fabricated scaffold. Then the scaffold was infiltrated with hydrogel of glycidyl methacrylate hyaluronic acid loading with 10 ng/mL of TGF-β1 and photo cross-linked on the top of the scaffolds. Serious tests of mechanical and biological properties were performed in vitro. HAp was found to significantly increase the compressive strength of the porous scaffolds. Among three orientations of the filaments, the lay down pattern 0°/90° scaffolds exhibited the highest compressive strength. Fluorescent staining of the cytoskeleton found that the osteoblast-like cells and stem cells well spread on RGD-modified PEG-PCL film indicating a favorable surface for the proliferation of cells. An in vivo test was performed on rabbit knee. The histological sections indicated that the bone and cartilage defects produced in the knees were fully healed 12 weeks after the implantation of the TGF-β1 loaded hydrogel and scaffolds, and regenerated cartilage was hyaline cartilage as indicated by alcian blue and periodic acid-schiff double staining.

Hydrostatic Compress Force Enhances the Viability and Decreases the Apoptosis of Condylar Chondrocytes through Integrin-FAK-ERK/PI3K Pathway

Reduced mechanical stimuli in many pathological cases, such as hemimastication and limited masticatory movements, can significantly affect the metabolic activity of mandibular condylar chondrocytes and the growth of mandibles. However, the molecular mechanisms for these phenomena remain unclear. In this study, we hypothesized that integrin-focal adhesion kinase (FAK)-ERK (extracellular signal-regulated kinase)/PI3K (phosphatidylinositol-3-kinase) signaling pathway mediated the cellular response of condylar chondrocytes to mechanical loading. Primary condylar chondrocytes were exposed to hydrostatic compressive forces (HCFs) of different magnitudes (0, 50, 100, 150, 200, and 250 kPa) for 2 h. We measured the viability, morphology, and apoptosis of the chondrocytes with different treatments as well as the gene, protein expression, and phosphorylation of mechanosensitivity-related molecules, such as integrin α2, integrin α5, integrin β1, FAK, ERK, and PI3K. HCFs could significantly increase the viability and surface area of condylar chondrocytes and decrease their apoptosis in a dose-dependent manner. HCF of 250 kPa resulted in a 1.51 ± 0.02-fold increase of cell viability and reduced the ratio of apoptotic cells from 18.10% ± 0.56% to 7.30% ± 1.43%. HCFs could significantly enhance the mRNA and protein expression of integrin α2, integrin α5, and integrin β1 in a dose-dependent manner, but not ERK1, ERK2, or PI3K. Instead, HCF could significantly increase phosphorylation levels of FAK, ERK1/2, and PI3K in a dose-dependent manner. Cilengitide, the potent integrin inhibitor, could dose-dependently block such effects of HCFs. HCFs enhances the viability and decreases the apoptosis of condylar chondrocytes through the integrin-FAK-ERK/PI3K pathway.