1
|
Ivanovski S, Breik O, Carluccio D, Alayan J, Staples R, Vaquette C. 3D printing for bone regeneration: challenges and opportunities for achieving predictability. Periodontol 2000 2023; 93:358-384. [PMID: 37823472 DOI: 10.1111/prd.12525] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2023] [Revised: 07/18/2023] [Accepted: 08/26/2023] [Indexed: 10/13/2023]
Abstract
3D printing offers attractive opportunities for large-volume bone regeneration in the oro-dental and craniofacial regions. This is enabled by the development of CAD-CAM technologies that support the design and manufacturing of anatomically accurate meshes and scaffolds. This review describes the main 3D-printing technologies utilized for the fabrication of these patient-matched devices, and reports on their pre-clinical and clinical performance including the occurrence of complications for vertical bone augmentation and craniofacial applications. Furthermore, the regulatory pathway for approval of these devices is discussed, highlighting the main hurdles and obstacles. Finally, the review elaborates on a variety of strategies for increasing bone regeneration capacity and explores the future of 4D bioprinting and biodegradable metal 3D printing.
Collapse
Affiliation(s)
- Saso Ivanovski
- School of Dentistry, Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), The University of Queensland, Queensland, Herston, Australia
| | - Omar Breik
- Herston Biofabrication Institute, Metro North Hospital and Health Service, Brisbane, Queensland, Australia
| | - Danilo Carluccio
- Herston Biofabrication Institute, Metro North Hospital and Health Service, Brisbane, Queensland, Australia
| | - Jamil Alayan
- School of Dentistry, Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), The University of Queensland, Queensland, Herston, Australia
| | - Ruben Staples
- School of Dentistry, Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), The University of Queensland, Queensland, Herston, Australia
| | - Cedryck Vaquette
- School of Dentistry, Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), The University of Queensland, Queensland, Herston, Australia
- Herston Biofabrication Institute, Metro North Hospital and Health Service, Brisbane, Queensland, Australia
| |
Collapse
|
2
|
Laubach M, Hildebrand F, Suresh S, Wagels M, Kobbe P, Gilbert F, Kneser U, Holzapfel BM, Hutmacher DW. The Concept of Scaffold-Guided Bone Regeneration for the Treatment of Long Bone Defects: Current Clinical Application and Future Perspective. J Funct Biomater 2023; 14:341. [PMID: 37504836 PMCID: PMC10381286 DOI: 10.3390/jfb14070341] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/19/2023] [Revised: 05/31/2023] [Accepted: 06/21/2023] [Indexed: 07/29/2023] Open
Abstract
The treatment of bone defects remains a challenging clinical problem with high reintervention rates, morbidity, and resulting significant healthcare costs. Surgical techniques are constantly evolving, but outcomes can be influenced by several parameters, including the patient's age, comorbidities, systemic disorders, the anatomical location of the defect, and the surgeon's preference and experience. The most used therapeutic modalities for the regeneration of long bone defects include distraction osteogenesis (bone transport), free vascularized fibular grafts, the Masquelet technique, allograft, and (arthroplasty with) mega-prostheses. Over the past 25 years, three-dimensional (3D) printing, a breakthrough layer-by-layer manufacturing technology that produces final parts directly from 3D model data, has taken off and transformed the treatment of bone defects by enabling personalized therapies with highly porous 3D-printed implants tailored to the patient. Therefore, to reduce the morbidities and complications associated with current treatment regimens, efforts have been made in translational research toward 3D-printed scaffolds to facilitate bone regeneration. Three-dimensional printed scaffolds should not only provide osteoconductive surfaces for cell attachment and subsequent bone formation but also provide physical support and containment of bone graft material during the regeneration process, enhancing bone ingrowth, while simultaneously, orthopaedic implants supply mechanical strength with rigid, stable external and/or internal fixation. In this perspective review, we focus on elaborating on the history of bone defect treatment methods and assessing current treatment approaches as well as recent developments, including existing evidence on the advantages and disadvantages of 3D-printed scaffolds for bone defect regeneration. Furthermore, it is evident that the regulatory framework and organization and financing of evidence-based clinical trials remains very complex, and new challenges for non-biodegradable and biodegradable 3D-printed scaffolds for bone regeneration are emerging that have not yet been sufficiently addressed, such as guideline development for specific surgical indications, clinically feasible design concepts for needed multicentre international preclinical and clinical trials, the current medico-legal status, and reimbursement. These challenges underscore the need for intensive exchange and open and honest debate among leaders in the field. This goal can be addressed in a well-planned and focused stakeholder workshop on the topic of patient-specific 3D-printed scaffolds for long bone defect regeneration, as proposed in this perspective review.
Collapse
Affiliation(s)
- Markus Laubach
- Australian Research Council (ARC) Training Centre for Multiscale 3D Imaging, Modelling and Manufacturing (M3D Innovation), Queensland University of Technology, Brisbane, QLD 4000, Australia
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane, QLD 4059, Australia
- Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), LMU University Hospital, LMU Munich, Marchioninistraße 15, 81377 Munich, Germany
| | - Frank Hildebrand
- Department of Orthopaedics, Trauma and Reconstructive Surgery, RWTH Aachen University Hospital, Pauwelsstraße 30, 52074 Aachen, Germany
| | - Sinduja Suresh
- Australian Research Council (ARC) Training Centre for Multiscale 3D Imaging, Modelling and Manufacturing (M3D Innovation), Queensland University of Technology, Brisbane, QLD 4000, Australia
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane, QLD 4059, Australia
| | - Michael Wagels
- Department of Plastic Surgery, Princess Alexandra Hospital, Woolloongabba, QLD 4102, Australia;
- The Herston Biofabrication Institute, The University of Queensland, Herston, QLD 4006, Australia
- Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, QLD 4102, Australia
- Department of Plastic and Reconstructive Surgery, Queensland Children’s Hospital, South Brisbane, QLD 4101, Australia
- The Australian Centre for Complex Integrated Surgical Solutions, Woolloongabba, QLD 4102, Australia
| | - Philipp Kobbe
- Department of Orthopaedics, Trauma and Reconstructive Surgery, RWTH Aachen University Hospital, Pauwelsstraße 30, 52074 Aachen, Germany
| | - Fabian Gilbert
- Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), LMU University Hospital, LMU Munich, Marchioninistraße 15, 81377 Munich, Germany
| | - Ulrich Kneser
- Department of Hand, Plastic and Reconstructive Surgery, Microsurgery, Burn Center, BG Trauma Center Ludwigshafen, University of Heidelberg, 67071 Ludwigshafen, Germany
| | - Boris M. Holzapfel
- Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), LMU University Hospital, LMU Munich, Marchioninistraße 15, 81377 Munich, Germany
| | - Dietmar W. Hutmacher
- Australian Research Council (ARC) Training Centre for Multiscale 3D Imaging, Modelling and Manufacturing (M3D Innovation), Queensland University of Technology, Brisbane, QLD 4000, Australia
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane, QLD 4059, Australia
- Max Planck Queensland Centre (MPQC) for the Materials Science of Extracellular Matrices, Queensland University of Technology, Brisbane, QLD 4000, Australia
- ARC Training Centre for Cell and Tissue Engineering Technologies (CTET), Queensland University of Technology (QUT), Brisbane, QLD 4000, Australia
| |
Collapse
|
3
|
Sparks DS, Savi FM, Dlaska CE, Saifzadeh S, Brierly G, Ren E, Cipitria A, Reichert JC, Wille ML, Schuetz MA, Ward N, Wagels M, Hutmacher DW. Convergence of scaffold-guided bone regeneration principles and microvascular tissue transfer surgery. SCIENCE ADVANCES 2023; 9:eadd6071. [PMID: 37146134 PMCID: PMC10162672 DOI: 10.1126/sciadv.add6071] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
A preclinical evaluation using a regenerative medicine methodology comprising an additively manufactured medical-grade ε-polycaprolactone β-tricalcium phosphate (mPCL-TCP) scaffold with a corticoperiosteal flap was undertaken in eight sheep with a tibial critical-size segmental bone defect (9.5 cm3, M size) using the regenerative matching axial vascularization (RMAV) approach. Biomechanical, radiological, histological, and immunohistochemical analysis confirmed functional bone regeneration comparable to a clinical gold standard control (autologous bone graft) and was superior to a scaffold control group (mPCL-TCP only). Affirmative bone regeneration results from a pilot study using an XL size defect volume (19 cm3) subsequently supported clinical translation. A 27-year-old adult male underwent reconstruction of a 36-cm near-total intercalary tibial defect secondary to osteomyelitis using the RMAV approach. Robust bone regeneration led to complete independent weight bearing within 24 months. This article demonstrates the widely advocated and seldomly accomplished concept of "bench-to-bedside" research and has weighty implications for reconstructive surgery and regenerative medicine more generally.
Collapse
Affiliation(s)
- David S Sparks
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- Department of Plastic and Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, QLD, Australia
- Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, QLD, Australia
| | - Flavia M Savi
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Brisbane, QLD, Australia
| | - Constantin E Dlaska
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
| | - Siamak Saifzadeh
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Brisbane, QLD, Australia
- Medical Engineering Research Facility, Queensland University of Technology, Chermside, QLD, Australia
| | - Gary Brierly
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
| | - Edward Ren
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
| | - Amaia Cipitria
- Department of Biomaterials, Max Planck Institute of Colloids and Interfaces, Potsdam, Germany
- Biodonostia Health Research Institute, San Sebastian, Spain
- IKERBASQUE, Basque Foundation for Science, Bilbao, Spain
| | - Johannes C Reichert
- Department of Orthopaedics and Orthopaedic Surgery, University Medicine Greifswald, Ferdinand-Sauerbruch-Straße, Greifswald, Germany
| | - Marie-Luise Wille
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Brisbane, QLD, Australia
| | - Michael A Schuetz
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Brisbane, QLD, Australia
- Jamieson Trauma Institute, Royal Brisbane Hospital, Herston, QLD, Australia
| | - Nicola Ward
- Department of Orthopaedics, Princess Alexandra Hospital, Woolloongabba, QLD, Australia
| | - Michael Wagels
- Department of Plastic and Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, QLD, Australia
- Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, QLD, Australia
- Australian Centre for Complex Integrated Surgical Solutions (ACCISS), Princess Alexandra Hospital, Woolloongabba, QLD, Australia
| | - Dietmar W Hutmacher
- Centre for Biomedical Technologies, School of Mechanical, Medical, and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
- ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Brisbane, QLD, Australia
- ARC Training Centre for Additive Biomanufacturing, Queensland University of Technology, Kelvin Grove, QLD, Australia
| |
Collapse
|
4
|
Sparks DS, Wiper J, Lloyd T, Wille ML, Sehu M, Savi FM, Ward N, Hutmacher DW, Wagels M. Protocol for the BONE-RECON trial: a single-arm feasibility trial for critical sized lower limb BONE defect RECONstruction using the mPCL-TCP scaffold system with autologous vascularised corticoperiosteal tissue transfer. BMJ Open 2023; 13:e056440. [PMID: 37137563 PMCID: PMC10163528 DOI: 10.1136/bmjopen-2021-056440] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 05/05/2023] Open
Abstract
INTRODUCTION Reconstruction of critical bone defects is challenging. In a substantial subgroup of patients, conventional reconstructive techniques are insufficient. Biodegradable scaffolds have emerged as a novel tissue engineering strategy for critical-sized bone defect reconstruction. A corticoperiosteal flap integrates the hosts' ability to regenerate bone and permits the creation of a vascular axis for scaffold neo-vascularisation (regenerative matching axial vascularisation-RMAV). This phase IIa study evaluates the application of the RMAV approach alongside a custom medical-grade polycaprolactone-tricalcium phosphate (mPCL-TCP) scaffold (Osteopore) to regenerate bone sufficient to heal critical size defects in lower limb defects. METHODS AND ANALYSIS This open-label, single-arm feasibility trial will be jointly coordinated by the Complex Lower Limb Clinic (CLLC) at the Princess Alexandra Hospital in Woolloongabba (Queensland, Australia), the Australian Centre for Complex Integrated Surgical Solutions (Queensland, Australia) and the Faculty of Engineering, Queensland University of Technology in Kelvin Grove (Queensland, Australia). Aiming for limb salvage, the study population (n=10) includes any patient referred to the CLLC with a critical-sized bone defect not amenable to conventional reconstructive approaches, after discussion by the interdisciplinary team. All patients will receive treatment using the RMAV approach using a custom mPCL-TCP implant. The primary study endpoint will be safety and tolerability of the reconstruction. Secondary end points include time to bone union and weight-bearing status on the treated limb. Results of this trial will help shape the role of scaffold-guided bone regenerative approaches in complex lower limb reconstruction where current options remain limited. ETHICS AND DISSEMINATION Approval was obtained from the Human Research Ethics Committee at the participating centre. Results will be submitted for publication in a peer-reviewed journal. TRIAL REGISTRATION NUMBER ACTRN12620001007921.
Collapse
Affiliation(s)
- David S Sparks
- Queensland University of Technology, Faculty of Engineering, Brisbane, Queensland, Australia
- The University of Queensland PA Southside Clinical School, Woolloongabba, Queensland, Australia
| | - Jay Wiper
- Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, Queensland, Australia
| | - Thomas Lloyd
- Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, Queensland, Australia
- Department of Radiology, Princess Alexandra Hospital, Woolloongabba, Queensland, Australia
| | - Marie-Luise Wille
- Queensland University of Technology, Faculty of Engineering, Brisbane, Queensland, Australia
- ARC Training Centre for Multiscale 3D Imaging, Modelling and Manufacturing, Queensland University of Technology, Brisbane, Queensland, Australia
- School of Mechanical, Medical, and Process Engineering | Faculty of Engineering, Queensland University of Technology, Brisbane, Queensland, Australia
| | - Marjoree Sehu
- Department of Infectious Diseases, Princess Alexandra Hospital, Woolloongabba, Queensland, Australia
| | - Flavia M Savi
- Queensland University of Technology, Faculty of Engineering, Brisbane, Queensland, Australia
- ARC Training Centre for Multiscale 3D Imaging, Modelling and Manufacturing, Queensland University of Technology, Brisbane, Queensland, Australia
- School of Mechanical, Medical, and Process Engineering | Faculty of Engineering, Queensland University of Technology, Brisbane, Queensland, Australia
| | - Nicola Ward
- Department of Orthopaedics, Princess Alexandra Hospital, Woolloongabba, Queensland, Australia
| | - Dietmar W Hutmacher
- ARC Training Centre for Multiscale 3D Imaging, Modelling and Manufacturing, Queensland University of Technology, Brisbane, Queensland, Australia
- School of Mechanical, Medical, and Process Engineering | Faculty of Engineering, Queensland University of Technology, Brisbane, Queensland, Australia
- Faculty of Health, School of Biomedical Siences, Queensland University of Technology, Brisbane, Queensland, Australia
| | - Michael Wagels
- Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, Queensland, Australia
- Australian Centre for Complex Integrated Surgical Solutions (ACCISS), Translational Research Institute Australia Ghrelin Research Group, South Brisbane, Queensland, Australia
| |
Collapse
|
5
|
Rougier G, Maistriaux L, Fievé L, Xhema D, Evrard R, Manon J, Olszewski R, Szmytka F, Thurieau N, Boisson J, Kadlub N, Gianello P, Behets C, Lengelé B. Decellularized vascularized bone grafts: A preliminary in vitro porcine model for bioengineered transplantable bone shafts. Front Bioeng Biotechnol 2023; 10:1003861. [PMID: 36743653 PMCID: PMC9890275 DOI: 10.3389/fbioe.2022.1003861] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/26/2022] [Accepted: 12/09/2022] [Indexed: 01/19/2023] Open
Abstract
Introduction: Durable reconstruction of critical size bone defects is still a surgical challenge despite the availability of numerous autologous and substitute bone options. In this paper, we have investigated the possibility of creating a living bone allograft, using the perfusion/decellularization/recellularization (PDR) technique, which was applied to an original model of vascularized porcine bone graft. Materials and Methods: 11 porcine bone forelimbs, including radius and ulna, were harvested along with their vasculature including the interosseous artery and then decellularized using a sequential detergent perfusion protocol. Cellular clearance, vasculature, extracellular matrix (ECM), and preservation of biomechanical properties were evaluated. The cytocompatibility and in vitro osteoinductive potential of acellular extracellular matrix were studied by static seeding of NIH-3T3 cells and porcine adipose mesenchymal stem cells (pAMSC), respectively. Results: The vascularized bone grafts were successfully decellularized, with an excellent preservation of the 3D morphology and ECM microarchitecture. Measurements of DNA and ECM components revealed complete cellular clearance and preservation of ECM's major proteins. Bone mineral density (BMD) acquisitions revealed a slight, yet non-significant, decrease after decellularization, while biomechanical testing was unmodified. Cone beam computed tomography (CBCT) acquisitions after vascular injection of barium sulphate confirmed the preservation of the vascular network throughout the whole graft. The non-toxicity of the scaffold was proven by the very low amount of residual sodium dodecyl sulfate (SDS) in the ECM and confirmed by the high live/dead ratio of fibroblasts seeded on periosteum and bone ECM-grafts after 3, 7, and 16 days of culture. Moreover, cell proliferation tests showed a significant multiplication of seeded cell populations at the same endpoints. Lastly, the differentiation study using pAMSC confirmed the ECM graft's potential to promote osteogenic differentiation. An osteoid-like deposition occurred when pAMSC were cultured on bone ECM in both proliferative and osteogenic differentiation media. Conclusion: Fully decellularized bone grafts can be obtained by perfusion decellularization, thereby preserving ECM architecture and their vascular network, while promoting cell growth and differentiation. These vascularized decellularized bone shaft allografts thus present a true potential for future in vivo reimplantation. Therefore, they may offer new perspectives for repairing large bone defects and for bone tissue engineering.
Collapse
Affiliation(s)
- Guillaume Rougier
- Pole of Morphology (MORF)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium,Department of Oncological and Cervicofacial Reconstructive Surgery, Otorhinolaryngology, Maxillofacial Surgery—Institut Curie, Paris, France
| | - Louis Maistriaux
- Pole of Morphology (MORF)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium,Pole of Experimental Surgery and Transplantation (CHEX)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium,*Correspondence: Louis Maistriaux,
| | - Lies Fievé
- Pole of Morphology (MORF)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium
| | - Daela Xhema
- Pole of Experimental Surgery and Transplantation (CHEX)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium
| | - Robin Evrard
- Pole of Experimental Surgery and Transplantation (CHEX)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium,Neuromusculoskeletal Lab (NMSK)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium
| | - Julie Manon
- Pole of Morphology (MORF)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium,Neuromusculoskeletal Lab (NMSK)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium
| | - Raphael Olszewski
- Neuromusculoskeletal Lab (NMSK)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium,Department of Maxillofacial Surgery and Stomatology—Cliniques Universitaires Saint-Luc, Brussels, Belgium
| | - Fabien Szmytka
- IMSIA, ENSTA Paris, Institut Polytechnique de Paris, Palaiseau, France
| | - Nicolas Thurieau
- IMSIA, ENSTA Paris, Institut Polytechnique de Paris, Palaiseau, France
| | - Jean Boisson
- IMSIA, ENSTA Paris, Institut Polytechnique de Paris, Palaiseau, France
| | - Natacha Kadlub
- IMSIA, ENSTA Paris, Institut Polytechnique de Paris, Palaiseau, France,Department of Maxillofacial and Reconstructive Surgery—Necker Enfants Malades, Paris, France
| | - Pierre Gianello
- Pole of Experimental Surgery and Transplantation (CHEX)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium
| | - Catherine Behets
- Pole of Morphology (MORF)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium
| | - Benoît Lengelé
- Pole of Morphology (MORF)—Institute of Experimental and Clinical Research (IREC)—UCLouvain, Brussels, Belgium,Department of Plastic and Reconstructive Surgery—Cliniques Universitaires Saint-Luc, Brussels, Belgium
| |
Collapse
|
6
|
Gonzalez Matheus I, Hutmacher DW, Olson S, Redmond M, Sutherland A, Wagels M. A Medical-Grade Polycaprolactone and Tricalcium Phosphate Scaffold System With Corticoperiosteal Tissue Transfer for the Reconstruction of Acquired Calvarial Defects in Adults: Protocol for a Single-Arm Feasibility Trial. JMIR Res Protoc 2022; 11:e36111. [PMID: 36227628 PMCID: PMC9614622 DOI: 10.2196/36111] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/14/2022] [Revised: 04/26/2022] [Accepted: 06/20/2022] [Indexed: 11/26/2022] Open
Abstract
Background Large skull defects present a reconstructive challenge. Conventional cranioplasty options include autologous bone grafts, vascularized bone, metals, synthetic ceramics, and polymers. Autologous options are affected by resorption and residual contour deformities. Synthetic materials may be customized via digital planning and 3D printing, but they all carry a risk of implant exposure, failure, and infection, which increases when the defect is large. These complications can be a threat to life. Without reconstruction, patients with cranial defects may experience headaches and stigmatization. The protection of the brain necessitates lifelong helmet use, which is also stigmatizing. Objective Our clinical trial will formally study a hybridized technique's capacity to reconstruct large calvarial defects. Methods A hybridized technique that draws on the benefits of autologous and synthetic materials has been developed by the research team. This involves wrapping a biodegradable, ultrastructured, 3D-printed scaffold made of medical-grade polycaprolactone and tricalcium phosphate in a vascularized, autotransplanted periosteum to exploit the capacity of vascularized periostea to regenerate bone. In vitro, the scaffold system supports cell attachment, migration, and proliferation with slow but sustained degradation to permit host tissue regeneration and the replacement of the scaffold. The in vivo compatibility of this scaffold system is robust—the base material has been used clinically as a resorbable suture material for decades. The importance of scaffold vascularization, which is inextricably linked to bone regeneration, is underappreciated. A variety of methods have been described to address this, including scaffold prelamination and axial vascularization via arteriovenous loops and autotransplanted flaps. However, none of these directly promote bone regeneration. Results We expect to have results before the end of 2023. As of December 2020, we have enrolled 3 participants for the study. Conclusions The regenerative matching axial vascularization technique may be an alternative method of reconstruction for large calvarial defects. It involves performing a vascularized free tissue transfer and using a bioresorbable, 3D-printed scaffold to promote and support bone regeneration (termed the regenerative matching axial vascularization technique). This technique may be used to reconstruct skull bone defects that were previously thought to be unreconstructable, reduce the risk of implant-related complications, and achieve consistent outcomes in cranioplasty. This must now be tested in prospective clinical trials. Trial Registration Australian New Zealand Clinical Trials Registry ACTRN12620001171909; https://tinyurl.com/4rakccb3 International Registered Report Identifier (IRRID) DERR1-10.2196/36111
Collapse
Affiliation(s)
- Isabel Gonzalez Matheus
- Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Queenland, Australia.,Herston Biofabrication Institute, Herston, Australia.,The Australian Centre for Complex Integrated Surgical Solutions, Translational Research Institute, Woolloongabba, Australia.,School of Medicine, University of Queensland, Brisbane, Australia
| | - Dietmar W Hutmacher
- Regenerative Medicine Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Australia
| | - Sarah Olson
- Department of Neurosurgery, Princess Alexandra Hospital, Woolloongabba, Australia
| | - Michael Redmond
- Herston Biofabrication Institute, Herston, Australia.,Department of Neurosurgery, Royal Brisbane & Women's Hospital, Herston, Australia
| | - Allison Sutherland
- The Australian Centre for Complex Integrated Surgical Solutions, Translational Research Institute, Woolloongabba, Australia
| | - Michael Wagels
- Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Queenland, Australia.,Herston Biofabrication Institute, Herston, Australia.,The Australian Centre for Complex Integrated Surgical Solutions, Translational Research Institute, Woolloongabba, Australia.,School of Medicine, University of Queensland, Brisbane, Australia
| |
Collapse
|
7
|
Zhao L, Lei Y, Pang M, Wei Z. An improved bone transport surgical method for treating chronic ischemic ulcers (thromboangiitis obliterans). Front Surg 2022; 9:859201. [PMID: 36061060 PMCID: PMC9437542 DOI: 10.3389/fsurg.2022.859201] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/21/2022] [Accepted: 07/13/2022] [Indexed: 11/24/2022] Open
Abstract
Introduction The chronic ischemic injury of the upper/lower limbs caused by thromboangiitis obliterans (TAO, Buerger's disease) is difficult to heal, leading to high morbidity and amputation risk, seriously lowering the quality of life of patients. So far, the pathogenesis of this disease is still not clear, and there are still no effective therapeutic approaches. Here, we first use an improved bone transport technique to treat TAO-related foot ulcers and achieve good therapeutic effects. Materials and Methods In this report, 22 patients met the inclusion criteria, and we provide an improved bone transport technique to repair TAO-related chronic lower limb wounds, which have a minimally surgical incision and a satisfying surgical field. Results The improved bone transport technique resulted in TAO-related chronic lower extremity wound healing in most patients (18, M:F 16:2) within the first treatment cycle. All wounds healed completely after two treatment cycles. After these cycles, the cold sensation in the patients’ feet was significantly relieved, and the rest pain in the lower extremities was significantly relieved (Visual Analog Scale, P < 0.0001). Furthermore, the Laser Doppler flowmeter showed that the blood perfusion and percutaneous oxygen pressure of the affected foot were higher than in preoperation (P < 0.0001). To conclude, bone transport technology is available for the refractory wounds of the extremity, which may promote healing by increasing blood circulation and tissue oxygen supply. Conclusions In summary, the improved surgical method of the bone transport technique is worth considering in the treatment of thromboangiitis obliterans–related foot ulcers.
Collapse
Affiliation(s)
- Liang Zhao
- Department of Burns and Plastic Surgery, The Affiliated Hospital of Guizhou Medical University, Guiyang, China
- Department of Burns and Plastic Surgery, The Affiliated Hospital of Zunyi Medical College, Zunyi, China
| | - Yu Lei
- Department of Burns and Plastic Surgery, The Affiliated Hospital of Guizhou Medical University, Guiyang, China
| | - Mengru Pang
- Department of Burns and Plastic Surgery, The Affiliated Hospital of Guizhou Medical University, Guiyang, China
- Correspondence: Mengru Pang Zairong Wei
| | - Zairong Wei
- Department of Burns and Plastic Surgery, The Affiliated Hospital of Zunyi Medical College, Zunyi, China
- Correspondence: Mengru Pang Zairong Wei
| |
Collapse
|
8
|
Sparks DS, Medeiros Savi F, Saifzadeh S, Wille ML, Wagels M, Hutmacher DW. Bone Regeneration Exploiting Corticoperiosteal Tissue Transfer for Scaffold-Guided Bone Regeneration. Tissue Eng Part C Methods 2022; 28:202-213. [PMID: 35262425 DOI: 10.1089/ten.tec.2022.0015] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
Contemporary reconstructive approaches for critical size bone defects carry significant disadvantages. As a result, clinically driven research has focused on the development and translation of alternative therapeutic concepts. Scaffold-guided tissue regeneration (SGTR) is an emerging technique to heal critical size bone defects. However, issues synchronizing scaffold vascularization with bone-specific regenerative processes currently limit bone regeneration for extra large (XL, 19 cm3) critical bone defects. To address this issue, we developed a large animal model that incorporates a corticoperiosteal flap (CPF) for sustained scaffold neovascularization and bone regeneration. In 10 sheep, we demonstrated the efficacy of this approach for healing medium (M, 9 cm3) size critical bone defects as demonstrated on plain radiography, microcomputed tomography, and histology. Furthermore, in two sheep, we demonstrate how this approach can be safely extended to heal XL critical size defects. This article presents an original CPF technique in a well-described preclinical model, which can be used in conjunction with the SGTR concept, to address challenging critical size bone defects in vivo. Impact statement This article describes a novel scaffold-guided tissue engineering approach utilizing a corticoperiosteal flap for bone healing in critical size long bone defects. This approach will be of use for tissue engineers and surgeons exploring vascularized tissue transfer as an option to regenerate large volumes of bone for extensive critical size bone defects both in vivo and in the clinical arena.
Collapse
Affiliation(s)
- David S Sparks
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, Australia.,Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, Australia.,Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, Australia
| | - Flavia Medeiros Savi
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, Australia.,ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Brisbane, Australia
| | - Siamak Saifzadeh
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, Australia.,Medical Engineering Research Facility, Queensland University of Technology, Chermside, Australia
| | - Marie-Luise Wille
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, Australia.,ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Brisbane, Australia
| | - Michael Wagels
- Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, Australia.,Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, Australia.,Australian Centre for Complex Integrated Surgical Solutions (ACCISS), Princess Alexandra Hospital, Woolloongabba, Australia.,Herston Biofabrication Institute, Metro North Hospital and Health Service, Brisbane, Australia
| | - Dietmar W Hutmacher
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, Australia.,ARC Training Centre for Multiscale 3D Imaging, Modelling, and Manufacturing, Queensland University of Technology, Brisbane, Australia.,Herston Biofabrication Institute, Metro North Hospital and Health Service, Brisbane, Australia
| |
Collapse
|
9
|
Castrisos G, Gonzalez Matheus I, Sparks D, Lowe M, Ward N, Sehu M, Wille ML, Phua Y, Medeiros Savi F, Hutmacher D, Wagels M. Regenerative matching axial vascularisation of absorbable 3D-printed scaffold for large bone defects: A first in human series. J Plast Reconstr Aesthet Surg 2022; 75:2108-2118. [PMID: 35370116 DOI: 10.1016/j.bjps.2022.02.057] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2021] [Revised: 12/10/2021] [Accepted: 02/22/2022] [Indexed: 11/19/2022]
Abstract
BACKGROUND We describe the first clinical series of a novel bone replacement technique based on regenerative matching axial vascularisation (RMAV). This was used in four cases: a tibial defect after treatment of osteomyelitis; a calvarial defect after trauma and failed titanium cranioplasty; a paediatric tibial defect after neoadjuvant chemotherapy and resection of Ewing sarcoma; and a paediatric mandibular deficiency resulting from congenital hemifacial microsomia. METHOD All patients underwent reconstruction with three-dimensional (3D)-printed medical-grade polycaprolactone and tricalcium phosphate (mPCL-TCP) scaffolds wrapped in vascularised free corticoperiosteal flaps. OUTCOME Functional volumes of load-sharing regenerate bone have formed in all cases after a moderate duration of follow-up. At 36 cm, case 1 remains the longest segment of load bearing bone ever successfully reconstructed. This technique offers an alternative to existing methods of large volume bone defect reconstruction that may be safe, reliable, and give predictable outcomes in challenging situations. It achieves this by using a bioresorbable scaffold to support and direct the growth of regenerate bone, driven by RMAV. CONCLUSION This technique may facilitate the reconstruction of bone defects previously thought unreconstructable, reduce the risk of long-term implant-related complications and achieve these outcomes in a hostile environment. These potential benefits must now be formally tested in prospective clinical trials.
Collapse
Affiliation(s)
- George Castrisos
- Department of Plastic Surgery, Princess Alexandra Hospital, Woolloongabba, QLD, Australia
| | - Isabel Gonzalez Matheus
- Department of Plastic Surgery, Princess Alexandra Hospital, Woolloongabba, QLD, Australia; The Herston Biofabrication Institute, Herston; The University of Queensland, Australia; Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, Australia; The Australian Centre for Complex Integrated Surgical Solutions, Woolloongabba , Australia.
| | - David Sparks
- Department of Plastic Surgery, Princess Alexandra Hospital, Woolloongabba, QLD, Australia; Faculty of Engineering, Queensland University of Technology, Kelvin Grove, Australia; Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, Australia
| | - Martin Lowe
- Department of Orthopaedic Surgery, Princess Alexandra Hospital, Woolloongabba QLD, Australia
| | - Nicola Ward
- Department of Orthopaedic Surgery, Princess Alexandra Hospital, Woolloongabba QLD, Australia
| | - Marjoree Sehu
- Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, Australia; Infection Management Services, Princess Alexandra Hospital, Woolloongabba QLD, Australia
| | - Marie-Luise Wille
- Queensland University of Technology Node ARC Training Centre for Multiscale 3D Imaging, Modelling and Manufacturing, QLD, Australia; Queensland University of Technology, Institute of Health Biomedical Innovation, Australia
| | - Yun Phua
- Department of Plastic and Reconstructive Surgery, Queensland Children's Hospital, South Brisbane, QLD, Australia
| | - Flavia Medeiros Savi
- Department of Plastic and Reconstructive Surgery, Queensland Children's Hospital, South Brisbane, QLD, Australia; Queensland University of Technology, Institute of Health Biomedical Innovation, Australia
| | - Dietmar Hutmacher
- Queensland University of Technology Node ARC Training Centre for Multiscale 3D Imaging, Modelling and Manufacturing, QLD, Australia; Queensland University of Technology, Institute of Health Biomedical Innovation, Australia
| | - Michael Wagels
- Department of Plastic Surgery, Princess Alexandra Hospital, Woolloongabba, QLD, Australia; The Herston Biofabrication Institute, Herston; The University of Queensland, Australia; Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, Australia; Department of Plastic and Reconstructive Surgery, Queensland Children's Hospital, South Brisbane, QLD, Australia; The Australian Centre for Complex Integrated Surgical Solutions, Woolloongabba , Australia
| |
Collapse
|
10
|
Moss SM, Ortiz-Hernandez M, Levin D, Richburg CA, Gerton T, Cook M, Houlton JJ, Rizvi ZH, Goodwin PC, Golway M, Ripley B, Hoying JB. A Biofabrication Strategy for a Custom-Shaped, Non-Synthetic Bone Graft Precursor with a Prevascularized Tissue Shell. Front Bioeng Biotechnol 2022; 10:838415. [PMID: 35356783 PMCID: PMC8959609 DOI: 10.3389/fbioe.2022.838415] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2021] [Accepted: 02/08/2022] [Indexed: 11/13/2022] Open
Abstract
Critical-sized defects of irregular bones requiring bone grafting, such as in craniofacial reconstruction, are particularly challenging to repair. With bone-grafting procedures growing in number annually, there is a reciprocal growing interest in bone graft substitutes to meet the demand. Autogenous osteo(myo)cutaneous grafts harvested from a secondary surgical site are the gold standard for reconstruction but are associated with donor-site morbidity and are in limited supply. We developed a bone graft strategy for irregular bone-involved reconstruction that is customizable to defect geometry and patient anatomy, is free of synthetic materials, is cellularized, and has an outer pre-vascularized tissue layer to enhance engraftment and promote osteogenesis. The graft, comprised of bioprinted human-derived demineralized bone matrix blended with native matrix proteins containing human mesenchymal stromal cells and encased in a simple tissue shell containing isolated, human adipose microvessels, ossifies when implanted in rats. Ossification follows robust vascularization within and around the graft, including the formation of a vascular leash, and develops mechanical strength. These results demonstrate an early feasibility animal study of a biofabrication strategy to manufacture a 3D printed patient-matched, osteoconductive, tissue-banked, bone graft without synthetic materials for use in craniofacial reconstruction. The bone fabrication workflow is designed to be performed within the hospital near the Point of Care.
Collapse
Affiliation(s)
- Sarah M. Moss
- Advanced Solutions Life Sciences, Louisville, KY, United States
| | - Monica Ortiz-Hernandez
- Veterans Affairs Puget Sound Health Care System, Seattle, WA, United States
- Department of Radiology, University of Washington School of Medicine, Seattle, WA, United States
| | - Dmitry Levin
- Veterans Affairs Puget Sound Health Care System, Seattle, WA, United States
- Department of Radiology, University of Washington School of Medicine, Seattle, WA, United States
| | - Chris A. Richburg
- Veterans Affairs Puget Sound Health Care System, Seattle, WA, United States
| | - Thomas Gerton
- Advanced Solutions Life Sciences, Louisville, KY, United States
| | - Madison Cook
- Advanced Solutions Life Sciences, Louisville, KY, United States
| | - Jeffrey J. Houlton
- Veterans Affairs Puget Sound Health Care System, Seattle, WA, United States
- Department of Radiology, University of Washington School of Medicine, Seattle, WA, United States
| | - Zain H. Rizvi
- Veterans Affairs Puget Sound Health Care System, Seattle, WA, United States
- Department of Radiology, University of Washington School of Medicine, Seattle, WA, United States
| | | | - Michael Golway
- Advanced Solutions Life Sciences, Louisville, KY, United States
| | - Beth Ripley
- Veterans Affairs Puget Sound Health Care System, Seattle, WA, United States
- Department of Radiology, University of Washington School of Medicine, Seattle, WA, United States
- *Correspondence: Beth Ripley, ; James B. Hoying,
| | - James B. Hoying
- Advanced Solutions Life Sciences, Louisville, KY, United States
- *Correspondence: Beth Ripley, ; James B. Hoying,
| |
Collapse
|
11
|
Knitschke M, Baumgart AK, Bäcker C, Adelung C, Roller F, Schmermund D, Böttger S, Streckbein P, Howaldt HP, Attia S. Impact of Periosteal Branches and Septo-Cutaneous Perforators on Free Fibula Flap Outcome: A Retrospective Analysis of Computed Tomography Angiography Scans in Virtual Surgical Planning. Front Oncol 2022; 11:821851. [PMID: 35127535 PMCID: PMC8807634 DOI: 10.3389/fonc.2021.821851] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2021] [Accepted: 12/24/2021] [Indexed: 11/13/2022] Open
Abstract
BackgroundVirtual surgical planning (VSP) for jaw reconstruction with free fibula flap (FFF) became a routine procedure and requires computed tomography angiography (CTA) for preoperative evaluation of the lower limbs vascular system and the bone. The aim of the study was to assess whether the distribution and density of periosteal branches (PB) and septo-cutaneous perforators (SCP) of the fibular artery have an impact on flap success.MethodThis retrospective clinical study assessed preoperative CTA of the infra-popliteal vasculature and the small vessel system of 72 patients who underwent FFF surgery. Surgical outcome of flap transfer includes wound healing, subtotal, and total flap loss were matched with the segmental vascular supply.ResultA total of 72 patients (28 females, 38.9 %; 44 males, 61.1 %) fulfilled the study inclusion criteria. The mean age was 58.5 (± 15.3 years). Stenoses of the lower limbs’ vessel (n = 14) were mostly detected in the fibular artery (n = 11). Flap success was recorded in n = 59 (82.0%), partial flap failure in n = 4 (5.5%) and total flap loss in n = 9 (12.5%). The study found a mean number (± SD) of 2.53 ± 1.60 PBs and 1.39 ± 1.03 SCPs of the FA at the donor-site. The proximal FFF segment of poly-segmental jaw reconstruction showed a higher rate of PB per flap segment than in the distal segments. Based on the total number of prepared segments (n = 121), 46.7% (n = 7) of mono-, 40.4% (n = 21) of bi-, and 31.5 % (n = 17) of tri-segmental fibula flaps were at least supplied by one PB in the success group. Overall, this corresponds to 37.2% (45 out of 121) of all successful FFF. For total flap loss (n = 14), a relative number of 42.9% (n = 6) of distinct supplied segments was recorded. Wound healing disorder of the donor site was not statistically significant influenced by the detected rate of SCP.ConclusionIn general, a correlation between higher rates of PB and SCP and the flap success could not be statistically proved by the study sample. We conclude, that preoperative PB and SCP mapping based on routine CTA imaging is not suitable for prediction of flap outcome.
Collapse
Affiliation(s)
- Michael Knitschke
- Department of Oral and Maxillofacial Surgery, Justus-Liebig-University, Giessen, Germany
- *Correspondence: Michael Knitschke,
| | - Anna Katrin Baumgart
- Department of Oral and Maxillofacial Surgery, Justus-Liebig-University, Giessen, Germany
| | - Christina Bäcker
- Department of Oral and Maxillofacial Surgery, Justus-Liebig-University, Giessen, Germany
| | - Christian Adelung
- Department of Diagnostic and Interventional Radiology and Pediatric Radiology, Justus-Liebig-University, Giessen, Germany
| | - Fritz Roller
- Department of Diagnostic and Interventional Radiology and Pediatric Radiology, Justus-Liebig-University, Giessen, Germany
| | - Daniel Schmermund
- Department of Oral and Maxillofacial Surgery, Justus-Liebig-University, Giessen, Germany
| | - Sebastian Böttger
- Department of Oral and Maxillofacial Surgery, Justus-Liebig-University, Giessen, Germany
| | - Philipp Streckbein
- Department of Oral and Maxillofacial Surgery, Justus-Liebig-University, Giessen, Germany
| | - Hans-Peter Howaldt
- Department of Oral and Maxillofacial Surgery, Justus-Liebig-University, Giessen, Germany
| | - Sameh Attia
- Department of Oral and Maxillofacial Surgery, Justus-Liebig-University, Giessen, Germany
| |
Collapse
|
12
|
Haris M, Haris S, Deeba F, Khan MJ. Anatomy of Nutrient Foramina of Adult Humerii in the Pakistani Population: A Cross-Sectional Study. Cureus 2021; 13:e19052. [PMID: 34858742 PMCID: PMC8614180 DOI: 10.7759/cureus.19052] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 10/26/2021] [Indexed: 11/07/2022] Open
Abstract
Objective In this study, we aimed to analyze the anatomy of adult humerii nutrient foramina in the Pakistani population, including the number, size, and relative position of the nutrient foramen in relation to the outer surface and zones, as well as length from the center of the humerus. Materials and methods Dry humerii of unknown age and gender were included and analyzed through non-probability convenience sampling. Those that were broken or had any pathology were excluded. The length of the humerus (cm), the number, size, and position of the nutrient foramen in relation to humerus surfaces and zones, as well as the distance from the humerus midpoint were studied. When many foramina were identified, the largest was designated as prominent foramen, and its dimensions (mm) were calculated. The data were collected and analyzed, i.e., mean, range, percentage, and standard deviation. Results A total of 50 adult dry humerii of unknown age and gender were studied. The humerii had a mean length of about 27.96 ±2.18 cm. The nutrient foramen had a mean size of about 0.828 ±0.26 mm. The mean distance from the humerus center to the major nutrient foramen was nearly 2.31 ±1.25 cm. The nutrient foramen was discovered in the bone in the middle one-third of humerii (84%) and 12% in the lower one-third, while it was only detected in 4% in the top one-third. The nutrient foramen was located in the anteromedial surface 80% of the time, the posterior surface 12% of the time, and the anterolateral surface 8% of the time. Conclusion Based on our findings, the nutrient foramina of adult humerii in the Pakistani population studied were discovered in the anteromedial and posterior surfaces on the anterolateral. Additionally, the nutrient foramen was identified in the middle and lower thirds of the humerii. The majority of the humerii had only one nutrient foramen, while a few humerii had several nutrient foramina. We believe physicians will find our results useful in treating humeral injuries and illnesses.
Collapse
Affiliation(s)
- Muhammad Haris
- Department of Anatomy, Nowshera Medical College, Nowshera, PAK
| | - Sobia Haris
- Medical Education and Simulation, Nowshera Medical College, Nowshera, PAK
| | - Farah Deeba
- Medical Education and Simulation, Nowshera Medical College, Nowshera, PAK
| | | |
Collapse
|
13
|
Yu K, Liu W, Su N, Chen H, Wang H, Tan Z. Evaluation of Resorption and Osseointegration of Autogenous Bone Ring Grafting in Vertical Bone Defect With Simultaneous Implant Placement in Dogs. J ORAL IMPLANTOL 2021; 47:295-302. [PMID: 32870248 DOI: 10.1563/aaid-joi-d-19-00199] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
The aim of this research was to evaluate the resorption and osseointegration of an autogenous bone ring, which was grafted in a local vertical alveolar defect with simultaneous implant placement. Six Beagle dogs were enrolled in the study; their 4 nonadjacent mandibular premolars were extracted, and the buccal plate was removed to create bone defects in 2 of the 4 sites. Three months after extraction, Straumann implants (Ø 3.3 mm, length of 8 mm) were placed in the bone defect sites with simultaneous autogenous bone ring grafting and in the conventional extraction sites. After a 3-month healing period and a 3-month loading period, the animals were euthanized. The harvested samples were analyzed using micro-computed tomography (CT) scanning and histological analysis. From the micro-CT measurements, the average vertical bone resorption of the bone ring was 0.23 ± 0.03 mm, which was not significantly different from that around the conventional implant, 0.24 ± 0.12 mm (P > .05). The ratio of the bone volume to the total volume of the bone ring group was 91.11 ± 0.02, which was higher than that of the control group, 88.38 ± 2.34 (P < .05). From the hard tissue section, the bone rings developed fine osseointegration with the implants and the base alveolar bone. The results suggest autogenous bone ring grafting with simultaneous implant placement can survive in a local vertical bone defect with little bone resorption and good osseointegration in dogs with strict management. A bone ring graft must be compared with guided bone regeneration, and a larger and longer observation must be confirmed in clinical patients.
Collapse
Affiliation(s)
- Ke Yu
- State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, Sichuan University, Chengdu, China; College of Stomatology, Hospital of Stomatology, Southwest Medical University, Luzhou, China
| | - Wenjia Liu
- Sichuan Hospital of Stomatology, Chengdu, China
| | - Naichuan Su
- State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, West China School & Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Helin Chen
- State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, West China School & Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Hang Wang
- State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, West China School & Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Zhen Tan
- State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases, West China School & Hospital of Stomatology, Sichuan University, Chengdu, China
| |
Collapse
|
14
|
The influence of biomechanical stability on bone healing and fracture-related infection: the legacy of Stephan Perren. Injury 2021; 52:43-52. [PMID: 32620328 DOI: 10.1016/j.injury.2020.06.044] [Citation(s) in RCA: 55] [Impact Index Per Article: 18.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 05/07/2020] [Revised: 06/16/2020] [Accepted: 06/24/2020] [Indexed: 02/02/2023]
Abstract
Bone healing is a complicated process of tissue regeneration that is influenced by multiple biological and biomechanical processes. In a minority of cases, these physiological processes are complicated by issues such as nonunion and/or fracture-related infection (FRI). Based on a select few in vivo experimental animal studies, construct stability is considered an important factor influencing both prevention and treatment of FRI. Stephan Perren played a pivotal role in the evolution of our current understanding of the critical relationship between biomechanics, fracture healing and infection. Furthermore, his concept of strain theory and the process of fracture healing is familiar to several generations of surgeons and has influenced implant development and design for the past 50 years. In this review we describe the role of biomechanical stability on fracture healing, and provide a detailed analysis of the preclinical studies addressing this in the context of FRI. Furthermore, we demonstrate how Perren's concepts of stability are still applied to current surgical techniques to aid in the prevention and treatment of FRI. Finally, we highlight the key knowledge gaps in the underlying basic research literature that need to be addressed as we continue to optimize patient care.
Collapse
|
15
|
Largo RD, Burger MG, Harschnitz O, Waschkies CF, Grosso A, Scotti C, Kaempfen A, Gueven S, Jundt G, Scherberich A, Schaefer DJ, Banfi A, Di Maggio N. VEGF Over-Expression by Engineered BMSC Accelerates Functional Perfusion, Improving Tissue Density and In-Growth in Clinical-Size Osteogenic Grafts. Front Bioeng Biotechnol 2020; 8:755. [PMID: 32714920 PMCID: PMC7351518 DOI: 10.3389/fbioe.2020.00755] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2020] [Accepted: 06/12/2020] [Indexed: 11/14/2022] Open
Abstract
The first choice for reconstruction of clinical-size bone defects consists of autologous bone flaps, which often lack the required mechanical strength and cause significant donor-site morbidity. We have previously developed biological substitutes in a rabbit model by combining bone tissue engineering and flap pre-fabrication. However, spontaneous vascularization was insufficient to ensure progenitor survival in the core of the constructs. Here, we hypothesized that increased angiogenic stimulation within constructs by exogenous VEGF can significantly accelerate early vascularization and tissue in-growth. Bone marrow stromal cells from NZW rabbits (rBMSC) were transduced with a retroviral vector to express rabbit VEGF linked to a truncated version of rabbit CD4 as a cell-surface marker. Autologous cells were seeded in clinical-size 5.5 cm3 HA scaffolds wrapped in a panniculus carnosus flap to provide an ample vascular supply, and implanted ectopically. Constructs seeded with VEGF-expressing rBMSC showed significantly increased progenitor survivival, depth of tissue ingrowth and amount of mineralized tissue. Contrast-enhanced MRI after 1 week in vivo showed significantly improved tissue perfusion in the inner layer of the grafts compared to controls. Interestingly, grafts containing VEGF-expressing rBMSC displayed a hierarchically organized functional vascular tree, composed of dense capillary networks in the inner layers connected to large-caliber feeding vessels entering the constructs at the periphery. These data constitute proof of principle that providing sustained VEGF signaling, independently of cells experiencing hypoxia, is effective to drive rapid vascularization and increase early perfusion in clinical-size osteogenic grafts, leading to improved tissue formation deeper in the constructs.
Collapse
Affiliation(s)
- Rene' D Largo
- Cell and Gene Therapy, Department of Biomedicine, >Basel University Hospital and University of Basel, Basel, Switzerland.,Plastic and Reconstructive Surgery, Department of Surgery, Basel University Hospital and University of Basel, Basel, Switzerland
| | - Maximilian G Burger
- Cell and Gene Therapy, Department of Biomedicine, >Basel University Hospital and University of Basel, Basel, Switzerland.,Plastic and Reconstructive Surgery, Department of Surgery, Basel University Hospital and University of Basel, Basel, Switzerland
| | - Oliver Harschnitz
- Cell and Gene Therapy, Department of Biomedicine, >Basel University Hospital and University of Basel, Basel, Switzerland.,Plastic and Reconstructive Surgery, Department of Surgery, Basel University Hospital and University of Basel, Basel, Switzerland
| | - Conny F Waschkies
- Institute for Biomedical Engineering, ETH and University of Zurich, Zurich, Switzerland.,Department of Surgical Research, University Hospital Zurich, Zurich, Switzerland
| | - Andrea Grosso
- Cell and Gene Therapy, Department of Biomedicine, >Basel University Hospital and University of Basel, Basel, Switzerland.,Plastic and Reconstructive Surgery, Department of Surgery, Basel University Hospital and University of Basel, Basel, Switzerland
| | - Celeste Scotti
- Tissue Engineering, Department of Biomedicine, University Hospital of Basel, University of Basel, Basel, Switzerland
| | - Alexandre Kaempfen
- Plastic and Reconstructive Surgery, Department of Surgery, Basel University Hospital and University of Basel, Basel, Switzerland
| | - Sinan Gueven
- Tissue Engineering, Department of Biomedicine, University Hospital of Basel, University of Basel, Basel, Switzerland
| | - Gernot Jundt
- Institute of Pathology, University Hospital of Basel, Basel, Switzerland
| | - Arnaud Scherberich
- Tissue Engineering, Department of Biomedicine, University Hospital of Basel, University of Basel, Basel, Switzerland
| | - Dirk J Schaefer
- Plastic and Reconstructive Surgery, Department of Surgery, Basel University Hospital and University of Basel, Basel, Switzerland
| | - Andrea Banfi
- Cell and Gene Therapy, Department of Biomedicine, >Basel University Hospital and University of Basel, Basel, Switzerland.,Plastic and Reconstructive Surgery, Department of Surgery, Basel University Hospital and University of Basel, Basel, Switzerland
| | - Nunzia Di Maggio
- Cell and Gene Therapy, Department of Biomedicine, >Basel University Hospital and University of Basel, Basel, Switzerland
| |
Collapse
|
16
|
Sparks DS, Saifzadeh S, Savi FM, Dlaska CE, Berner A, Henkel J, Reichert JC, Wullschleger M, Ren J, Cipitria A, McGovern JA, Steck R, Wagels M, Woodruff MA, Schuetz MA, Hutmacher DW. A preclinical large-animal model for the assessment of critical-size load-bearing bone defect reconstruction. Nat Protoc 2020; 15:877-924. [PMID: 32060491 DOI: 10.1038/s41596-019-0271-2] [Citation(s) in RCA: 39] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2019] [Accepted: 11/11/2019] [Indexed: 12/31/2022]
Abstract
Critical-size bone defects, which require large-volume tissue reconstruction, remain a clinical challenge. Bone engineering has the potential to provide new treatment concepts, yet clinical translation requires anatomically and physiologically relevant preclinical models. The ovine critical-size long-bone defect model has been validated in numerous studies as a preclinical tool for evaluating both conventional and novel bone-engineering concepts. With sufficient training and experience in large-animal studies, it is a technically feasible procedure with a high level of reproducibility when appropriate preoperative and postoperative management protocols are followed. The model can be established by following a procedure that includes the following stages: (i) preoperative planning and preparation, (ii) the surgical approach, (iii) postoperative management, and (iv) postmortem analysis. Using this model, full results for peer-reviewed publication can be attained within 2 years. In this protocol, we comprehensively describe how to establish proficiency using the preclinical model for the evaluation of a range of bone defect reconstruction options.
Collapse
Affiliation(s)
- David S Sparks
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia.,Department of Plastic & Reconswrapping a sterile Coban wrap around the limb distallytructive Surgery, Princess Alexandra Hospital, Woolloongabba, Queensland, Australia.,Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, Queensland, Australia
| | - Siamak Saifzadeh
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia.,Medical Engineering Research Facility, Queensland UCoban wrap only comes non-sterile. Sterilize Coban wrap before use.niversity of Technology, Chermside, Queensland, Australia
| | - Flavia Medeiros Savi
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia.,ARC Centre for Additive Biomanufactthe mounting resin base cement. Use it only in a laboratory fume cabinet and withuring, Queensland University of Technology, Kelvin Grove, Queensland, Australia
| | - Constantin E Dlaska
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia.,Jamieson Trauma Institute, Royal Brisbane Hospital, Herston, Queensland, Australia
| | - Arne Berner
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia.,Department of Trauma Surgery, University Hospital of Regensburg, Regensburg, Germany
| | - Jan Henkel
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia
| | - Johannes C Reichert
- Department of Orthopaedic Surgery, Center for Musculoskeletal Research, König-Ludwig-Haus, Julius-Maximilians-University, Würzburg, Germany.,Department of Orthopaedic and Trauma Surgery, Evangelisches Waldkrankenhaus Spandau, Berlin, Germany
| | - Martin Wullschleger
- Jamieson Trauma Institute, Royal Brisbane Hospital, Herston, Queensland, Australia.,Griffith University, School of Medicine, Southport, Queensland, Australia
| | - Jiongyu Ren
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia
| | - Amaia Cipitria
- Department of Biomaterials, Max Planck Institute of Colloids and Interfaces, Potsdam, Germany
| | - Jacqui A McGovern
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia
| | - Roland Steck
- Medical Engineering Research Facility, Queensland UCoban wrap only comes non-sterile. Sterilize Coban wrap before use.niversity of Technology, Chermside, Queensland, Australia
| | - Michael Wagels
- Department of Plastic & Reconswrapping a sterile Coban wrap around the limb distallytructive Surgery, Princess Alexandra Hospital, Woolloongabba, Queensland, Australia.,Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, Queensland, Australia.,Australian Centre for Complex Integrated Surgical Solutions (ACCISS), Princess Alexandra Hospital, Woolloongabba, Queensland, Australia
| | - Maria Ann Woodruff
- ARC Centre for Additive Biomanufactthe mounting resin base cement. Use it only in a laboratory fume cabinet and withuring, Queensland University of Technology, Kelvin Grove, Queensland, Australia.,Biofabrication and Tissue Morphology Group, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia
| | - Michael A Schuetz
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia.,Jamieson Trauma Institute, Royal Brisbane Hospital, Herston, Queensland, Australia
| | - Dietmar W Hutmacher
- Centre in Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Queensland, Australia. .,ARC Centre for Additive Biomanufactthe mounting resin base cement. Use it only in a laboratory fume cabinet and withuring, Queensland University of Technology, Kelvin Grove, Queensland, Australia.
| |
Collapse
|
17
|
Sparks DS, Savi FM, Saifzadeh S, Schuetz MA, Wagels M, Hutmacher DW. Convergence of Scaffold-Guided Bone Reconstruction and Surgical Vascularization Strategies-A Quest for Regenerative Matching Axial Vascularization. Front Bioeng Biotechnol 2020; 7:448. [PMID: 31998712 PMCID: PMC6967032 DOI: 10.3389/fbioe.2019.00448] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/24/2019] [Accepted: 12/13/2019] [Indexed: 02/06/2023] Open
Abstract
The prevalent challenge facing tissue engineering today is the lack of adequate vascularization to support the growth, function, and viability of tissue engineered constructs (TECs) that require blood vessel supply. The research and clinical community rely on the increasing knowledge of angiogenic and vasculogenic processes to stimulate a clinically-relevant vascular network formation within TECs. The regenerative matching axial vascularization approach presented in this manuscript incorporates the advantages of flap-based techniques for neo-vascularization yet also harnesses the in vivo bioreactor principle in a more directed "like for like" approach to further assist regeneration of the specific tissue type that is lost, such as a corticoperiosteal flap in critical sized bone defect reconstruction.
Collapse
Affiliation(s)
- David S Sparks
- Centre for Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, QLD, Australia.,Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, QLD, Australia.,Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, QLD, Australia
| | - Flavia Medeiros Savi
- Centre for Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, QLD, Australia
| | - Siamak Saifzadeh
- Centre for Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, QLD, Australia.,Medical Engineering Research Facility, Queensland University of Technology, Chermside, QLD, Australia
| | - Michael A Schuetz
- Department of Orthopaedic Surgery, Royal Brisbane Hospital, Herston, QLD, Australia.,Jamieson Trauma Institute, Royal Brisbane Hospital, Herston, QLD, Australia
| | - Michael Wagels
- Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woolloongabba, QLD, Australia.,Southside Clinical Division, School of Medicine, University of Queensland, Woolloongabba, QLD, Australia.,Australian Centre for Complex Integrated Surgical Solutions, Woolloongabba, QLD, Australia
| | - Dietmar W Hutmacher
- Centre for Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, QLD, Australia.,ARC Centre for Additive Bio-Manufacturing, Queensland University of Technology, Kelvin Grove, QLD, Australia
| |
Collapse
|
18
|
Ruiz-Moya A, Lagares-Borrego A, Sicilia-Castro D, Barrera-Pulido FJ, Gallo-Ayala JM, Santos-Rodas A, Hernandez-Beneit JM, Carvajo-Perez F, Gomez-Ciriza G, Gomez-Cia T. Pediatric extremity bone sarcoma reconstruction with the vascularized fibula flap: Observational study assessing long-term functional outcomes, complications, and survival. J Plast Reconstr Aesthet Surg 2019; 72:1887-1899. [DOI: 10.1016/j.bjps.2019.08.009] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/01/2019] [Revised: 08/05/2019] [Accepted: 08/18/2019] [Indexed: 10/26/2022]
|
19
|
Lee S, Prisby RD. Short-term intermittent PTH 1-34 administration and bone marrow blood vessel ossification in Mature and Middle-Aged C57BL/6 mice. Bone Rep 2019; 10:100193. [PMID: 30701186 PMCID: PMC6348201 DOI: 10.1016/j.bonr.2018.100193] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 04/05/2018] [Revised: 12/19/2018] [Accepted: 12/27/2018] [Indexed: 11/29/2022] Open
Abstract
Intermittent parathyroid hormone (PTH) administration augments bone and progressive bone marrow blood vessel (BMBV) ossification occurs with advancing age. Since intermittent PTH administration augments bone, it may also serve to increase BMBV ossification. We assessed the influence of 5- and 10-days of intermittent PTH 1–34 administration on trabecular and cortical bone and BMBV ossification in mature (6–8 mon; n = 30) and middle-aged (10–12 mon; n = 30) male and female C57BL/6 mice. Mice were divided accordingly: control (CON) and 5-days (5dPTH) and 10-days (10dPTH) of PTH. Mice were given PBS (50 μl) or PTH 1–34 (43 μg/kg/d) for 5- and 10-consecutive days. Trabecular bone microarchitecture (i.e., BV/TV [%], Tb.Th [μm], Tb.N [/mm], and Tb.Sp [μm]) was assessed in the distal femoral metaphysis and cortical bone parameters (i.e., Ct.Th [μm] and CSMI [mm4]) at the femoral mid-shaft. BMBV ossification (i.e., ossified vessel volume [OsVV, %] and ossified vessel thickness [OsV.Th, μm]) was assessed in the medullary cavity of the femoral shaft. All parameters were determined by μCT. At this sample size, no gender-related differences were observed so female and male data were pooled. There were no main effects nor interactions for trabecular microarchitecture and Ct.Th. However, CSMI was larger (p < 0.05) in Middle-Age vs. Mature and larger (p < 0.05) in CON and 10dPTH vs. 5dPTH. OsVV tended (p = 0.057) to be higher (0.18 ± 0.04% vs. 0.09 ± 0.02%, respectively) and OsV.Th was higher (p < 0.05; 17.4 ± 1.6 μm vs. 12.1 ± 1.4 μm, respectively) in Middle-Aged vs. Mature mice. OsVV was not altered, but ossified vessels tended (p = 0.08) to be thicker in 10dPTH (17.6 ± 2.0 μm) vs. CON (12.5 ± 1.7 μm). No interactions were observed for OsVV and OsV.Th. In conclusion, this is the first report of ossified BMBV in C57BL/6 mice. The increased OsV.Th in Middle-Aged mice coincides with previous reports of increased OsVV in aged rats. The tendency of augmented OsV.Th in 10dPTH suggests that this treatment may ultimately impair the patency of bone marrow blood vessels. Bone marrow blood vessel (BMBV) ossification occurs in rats and humans. This is the first report of BMBV ossification in Mature and Middle-Aged mice. Intermittent PTH administration tended to thicken ossified BMBV. PTH treatment may ultimately impact the patency of bone marrow blood vessels.
Collapse
Affiliation(s)
- Seungyong Lee
- Department of Kinesiology, University of Texas at Arlington, Arlington, TX 76019, United States of America
| | - Rhonda D Prisby
- Department of Kinesiology, University of Texas at Arlington, Arlington, TX 76019, United States of America
| |
Collapse
|
20
|
Sparks DS, Wagels M, Taylor GI. Bone reconstruction: A history of vascularized bone transfer. Microsurgery 2017; 38:7-13. [PMID: 29134687 DOI: 10.1002/micr.30260] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2017] [Revised: 09/06/2017] [Accepted: 10/03/2017] [Indexed: 11/09/2022]
Affiliation(s)
- David S Sparks
- Centre for Regenerative Medicine, Institute of Health and Biomedical Innovation, Queensland University of Technology, Kelvin Grove, Australia.,The Taylor Lab, Department of Anatomy and Neuroscience, University of Melbourne, Victoria, Australia.,Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woollongabba, Queensland, Australia.,Southside Clinical Division, School of Medicine, University of Queensland, Woollongabba, Queensland, Australia
| | - Michael Wagels
- Department of Plastic & Reconstructive Surgery, Princess Alexandra Hospital, Woollongabba, Queensland, Australia.,Southside Clinical Division, School of Medicine, University of Queensland, Woollongabba, Queensland, Australia
| | - G Ian Taylor
- The Taylor Lab, Department of Anatomy and Neuroscience, University of Melbourne, Victoria, Australia
| |
Collapse
|