3-Hydroxy-1,5-dihydro-pyrrol-2-one derivatives as advanced inhibitors of HIV integrase

Cyclization of N-Boc-(E)-α,β-unsaturated γ-amino acid active esters into N-Boc-(Z)-α,β-unsaturated γ-lactams through E → Z isomerization

Here, we are reporting the spontaneous transformation of the active esters of N-Boc protected E-α,β-unsaturated γ-amino acids into the corresponding Z-α,β-unsaturated γ-lactams with concomitant E → Z isomerization in the presence of a weak base. No cyclization was observed in the absence of the base. Analysis revealed that amide γ-NH is crucial for both lactamization and E → Z isomerization. This mild transformation provides easy access to the synthetically challenging α,β-unsaturated γ-lactams and also gives new insights into the E → Z isomerization of double bonds.

Amination of 5-Spiro-Substituted 3-Hydroxy-1,5-dihydro-2H-pyrrol-2-ones

The 3-hydroxy-1,5-dihydro-2H-pyrrol-2-one motif is a valuable scaffold in drug discovery. The replacement of the 3-oxy fragment in 3-hydroxy-1,5-dihydro-2H-pyrrol-2-ones-based compounds with a 3-amino one (3-amino analogs of 3-hydroxy-1,5-dihydro-2H-pyrrol-2-ones, 3-amino-1,5-dihydro-2H-pyrrol-2-ones) can play a crucial role in their biological effect. Thus, approaches to 3-amino-1,5-dihydro-2H-pyrrol-2-ones are of significant interest. We developed an approach to 5-spiro-substituted 3-amino-1,5-dihydro-2H-pyrrol-2-ones that could not be obtained using previously reported approaches (reactions of 3-hydroxy-1,5-dihydro-2H-pyrrol-2-ones with amines). The developed approach is based on the thermal decomposition of 1,3-disubstituted urea derivatives of 5-spiro-substituted 3-hydroxy-1,5-dihydro-2H-pyrrol-2-ones, which were prepared via their reaction with carbodiimides.

High-component reactions (HCRs): An overview of MCRs containing seven or more components as versatile tools in organic synthesis

Recently, multi-component reactions (MCRs) have gained special attention due to their versatility for the synthesis of polycyclic heterocycles. Moreover, their applicability can become more widespread as they can be combined together as a union of MCRs. In this overview, the authors have tried to collect the MCRs containing more than seven components that can lead to effectual heterocycles in organic and/or pharmaceutical chemistry. The review contains papers published up to the end of 2020. The subject is classified based on the number of substrates, such as seven-, eight-, nine-, ten-, and more components. The authors expect their report to be helpful for researchers to clarify their route to significant MCRs.

Alkynoates as Versatile and Powerful Chemical Tools for the Rapid Assembly of Diverse Heterocycles under Transition-Metal Catalysis: Recent Developments and Challenges

Heterocycles, heteroaromatics and spirocyclic entities are ubiquitous components of a wide plethora of synthetic drugs, biologically active natural products, marketed pharmaceuticals and agrochemical targets. Recognizing their high proportion in drugs and rich pharmacological potential, these invaluable structural motifs have garnered significant interest, thus enabling the development of efficient catalytic methodologies providing access to architecturally complex and diverse molecules with high atom-economy and low cost. These chemical processes not only allow the formation of diverse heterocycles but also utilize a range of flexible and easily accessible building units in a single operation to discover diversity-oriented synthetic approaches. Alkynoates are significantly important, diverse and powerful building blocks in organic chemistry due to their unique and inherent properties such as the electronic bias on carbon-carbon triple bonds posed by electron-withdrawing groups or the metallic coordination site provided by carbonyl groups. The present review highlights the comprehensive picture of the utility of alkynoates (2007-2019) for the synthesis of various heterocycles (> 50 types) using transition-metal catalysts (Ru, Rh, Pd, Ir, Ag, Au, Pt, Cu, Mn, Fe) in various forms. The valuable function of versatile alkynoates (bearing multifunctional groups) as simple and useful starting materials is explored, thus cyclizing with an array of coupling partners to deliver a broad range of oxygen-, nitrogen-, sulfur-containing heterocycles alongside fused-, and spiro-heterocyclic compounds. In addition, these examples will also focus the scope and reaction limitations, as well as mechanistic investigations into the synthesis of these heterocycles. The biological significance will also be discussed, citing relevant examples of drug molecules highlighting each class of heterocycles. This review summarizes the recent developments in the synthetic methods for the synthesis of various heterocycles using alkynoates as readily available starting materials under transition-metal catalysis.

Synthesis of a leopolic acid-inspired tetramic acid with antimicrobial activity against multidrug-resistant bacteria

The increasing emergence of multidrug-resistant pathogens is one of the biggest threats to human health and food security. The discovery of new antibacterials, and in particular the finding of new scaffolds, is an imperative goal to stay ahead of the evolution of antibiotic resistance. Herein we report the synthesis of a 3-decyltetramic acid analogue of the ureido dipeptide natural antibiotic leopolic acid A. The key step in the synthetic strategy is an intramolecular Lacey–Dieckmann cyclization reaction of a linear precursor to obtain the desired 3-alkyl-substituted tetramic acid core. The synthesized analogue is more effective than the parent leopolic acid A against Gram-positive (Staphylococcus pseudintermedius) and Gram-negative (E. coli) bacteria (MIC 8 µg/mL and 64 µg/mL, respectively). Interestingly, the compound shows a significant activity against Staphylococcus pseudintermedius strains expressing a multidrug-resistant phenotype (average MIC 32 µg/mL on 30 strains tested). These results suggest that this molecule can be considered a promising starting point for the development of a novel class of antibacterial agents active also against resistant strains.

Synthesis of highly substituted dihydro-2-oxopyrroles using Fe3O4@nano-cellulose–OPO3H as a novel bio-based magnetic nanocatalyst

A green and environmentally friendly approach for the synthesis of dihydro-2-oxopyrrole derivatives was developed using Fe₃O₄@nano-cellulose–OPO₃H as a novel bio-based magnetic nanocatalyst.

Total synthesis of leopolic acid A, a natural 2,3-pyrrolidinedione with antimicrobial activity

The first total synthesis of leopolic acid A, a fungal metabolite with a rare 2,3-pyrrolidinedione nucleus linked to an ureido dipeptide, was designed and carried out. Crucial steps for the strategy include a Dieckmann cyclization to obtain the 2,3-pyrrolidinedione ring and a Wittig olefination to install the polymethylene chain. An oxazolidinone-containing leopolic acid A analogue was also synthesized. The antibacterial activity showed by both compounds suggests that they could be considered as promising candidates for future developments.

The UiO-66-SO3H metal–organic framework as a green catalyst for the facile synthesis of dihydro-2-oxypyrrole derivatives

The multicomponent domino reaction synthesis of dihydro-2-oxopyrroles has been performed using the sulfonated metal–organic framework, UiO-66-SO₃H (UiO is the University of Oslo), as a highly efficient acid catalyst.

BF3/nano-sawdust as a green, biodegradable and inexpensive catalyst for the synthesis of highly substituted dihydro-2-oxopyrroles

BF₃/nano-sawdust was used as a readily available, inexpensive, biodegradable and environmentally benign heterogeneous solid acid catalyst for the one-pot cascade synthesis of highly functionalized dihydro-2-oxypyrroles.

Maltose, A Natural, Efficient and Economical Catalyst for the One-Pot Synthesis of Highly Substituted Dihydropyrrol-2-Ones

Maltose is a natural, economical and very effective catalyst for promotion of the four-component domino reaction between amines, dialkyl acetylenedicarboxylates and formaldehyde to afford substituted dihydropyrrol-2-ones at room temperature. The advantages of this protocol are good yields, short reaction times, low cost, environmentally friendly, simple work-up and lack of need for column chromatography.

Development of four-component synthesis of tetra- and pentasubstituted polyfunctional dihydropyrroles: free permutation and combination of aromatic and aliphatic amines

We previously reported the novel efficient proton/heat-promoted four-component reactions (4CRs) of but-2-ynedioates, two same/different primary amines, and aldehydes for the synthesis of tetra- and pentasubstituted polyfunctional dihydropyrroles. If aromatic and aliphatic amines were used as reagents, four different series of products should be obtained via the permutation and combination of aromatic and aliphatic primary amines. However, only three/two rather four different series of tetra-/pentasubstisuted dihydropyrroles could be prepared via the proton/heat-promoted 4CRs. Herein, Cu(OAc)2·H2O, a Lewis acid being stable in air and water, was found to be an efficient catalyst for the 4CR synthesis of all the four different series of tetra-/pentasubstisuted dihydropyrroles. The copper-catalyzed 4CR could produce target products at room temperature in good to excellent yields. Interestingly, benzaldehyde, in addition to being used as a useful reactant for the synthesis of pentasubstituted dihydropyrroles, was found to be an excellent additive for preventing the oxidation of aromatic amines with copper(II) and ensuring the sooth conduct of the 4CRs for the synthesis of tetrasubstituted dihydropyrroles with aryl R(3). In addition, salicylic acid was found to be needed to increase the activities and yields of the copper-catalyzed 4CRs for the synthesis of petasubstituted diyhydropyrroles. On the basis of experimental results, the enamination/amidation/intramolecular cyclization mechanism was proposed and amidation is expected to be the rate-limited step in the copper-catalyzed 4CRs.

A One-pot Multi-component Synthesis of N-aryl-3-aminodihydropyrrol-2-one-4-carboxylates Catalysed by Oxalic Acid Dihydrate

A simple synthesis of N-aryl-3-aminodihydropyrrol-2-one-4-carboxylates via one-pot multi-component reaction of amines, dialkyl acetylenedicarboxylates and formaldehyde in the presence of oxalic acid dihydrate (20 mol%) as catalyst in methanol is described. This homogeneous catalytic procedure offers advantages including mild reaction conditions, good to high yields, short reaction time, simple and readily available starting materials, easy work-up and there is no need for column chromatography.

Carbamoyl pyridone HIV-1 integrase inhibitors. 1. Molecular design and establishment of an advanced two-metal binding pharmacophore

Our group has focused on expanding the scope of a two-metal binding pharmacophore concept to explore HIV-1 integrase inhibitors through medicinal chemistry efforts to design novel scaffolds which allow for improvement of pharmacokinetic (PK) and resistance profiles. A novel chelating scaffold was rationally designed to effectively coordinate two magnesium cofactors and to extend an aromatic group into an optimal hydrophobic pharmacophore space. The new chemotype, consisting of a carbamoyl pyridone core unit, shows high inhibitory potency in both enzymatic and antiviral assay formats with low nM IC₅₀ and encouraging potency shift effects in the presence of relevant serum proteins. The new inhibitor design displayed a remarkable PK profile suggestive of once daily dosing without the need for a PK booster as demonstrated by robust drug concentrations at 24 h after oral dosing in rats, dogs, and cynomolgus monkeys.

A concise synthesis of 3-(1-alkenyl)isoindolin-1-ones and 5-(1-alkenyl)pyrrol-2-ones by the intermolecular coupling reactions of N-acyliminium ions with unactivated olefins

A concise synthesis of 3-(1-alkenyl)isoindolin-1-ones and 5-(1-alkenyl)pyrrol-2-ones has been achieved by the coupling reactions of N-acyliminium ions produced from 3-hydroxyisoindol-1-ones or 5-hydroxy-1-pyrrol-2-ones with unactivated olefins in the presence of BF₃·OEt₂ at room temperature. For most of the olefins, the reactions afforded the C_sp3–C_sp2 cross-coupling products, but for the α-methylstyrene and 1-hexene, the C_sp3–C_sp3 cross-coupling products were obtained.

Authentic HIV-1 integrase inhibitors

HIV-1 integrase (IN) is indispensable for HIV-1 replication and has become a validated target for developing anti-AIDS agents. In two decades of development of IN inhibition-based anti-HIV therapeutics, a significant number of compounds were identified as IN inhibitors, but only some of them showed antiviral activity. This article reviews a number of patented HIV-1 IN inhibitors, especially those that possess high selectivity for the strand transfer reaction. These compounds generally have a polar coplanar moiety, which is assumed to chelate two magnesium ions in the binding site. Resistance to those compounds, when given to patients, can develop as a result of IN mutations. We refer to those compounds as authentic IN inhibitors. Continued drug development has so far delivered one authentic IN inhibitor to the market (raltegravir in 2007). Current and future attention will be focused on the development of novel authentic IN inhibitors with the goal of overcoming viral resistance.