Structure-activity studies on the upstream splice junction of a semisynthetic intein

A Chemical Counterpart to the Resolution Step of Nature's Intein-Mediated Protein Splicing

In the course of an attempted total chemical synthesis of the ant insulin-like peptide-2 (ILP2) protein molecule, specific cleavage of a backbone peptide bond in a branched ester-linked polypeptide chain with concomitant peptide splicing was observed. The side reaction was investigated in model compounds. Here, we postulate a chemical mechanism for this novel polypeptide backbone cleavage reaction as a chemical counterpart to the resolution step of biochemical intein-mediated protein splicing.

Conditional protein splicing triggered by SUMO protease

Conditional protein splicing is a powerful biotechnological tool that can be used to post-translationally control the activity of target proteins. Here we demonstrated a novel conditional protein splicing approach in which the small ubiquitin-like modifier (SUMO) protease induced the splicing of an atypical split intein. The engineered Ter DnaE-3 S11 split intein which has a small C-intein segment with only 6 amino acids was used in this study. A SUMO tag was fused to the N-terminus of the C-intein to inhibit the protein trans-splicing in vitro. The splicing products could be detected in 15 min with the addition of SUMO protease by western blotting and the splicing efficiency was ∼4-fold higher than the control without SUMO protease for overnight reaction. This engineered Ter DnaE-3 S11 split intein-mediated protein trans-splicing had been further shown to be triggered by SUMO protease in different exteins in vitro. Our study provides new insights into the regulation of protein splicing and is a promising tool for the control of protein structure and function in vitro.

Preparation of Bacterial Cell-Surface Displayed Semisynthetic Cyclic Peptides

Semisynthetic cyclic peptides bearing both non-proteinogenic and genetically encoded amino acids are excellent ligands for peptide-based drug discovery. While semisynthesis expands the chemical space, genetic encoding allows access to a large library via randomization at the nucleic acid level. Selection of novel binders of such macrocyclic ligands requires linking their genotype to phenotype. In this chapter, we report a bacterial cell-surface display system to present cyclic peptides composed of synthetic and genetically encoded fragments. The synthetic fragment along with the split intein partner and an aminooxy moiety is ligated and cyclized with the recombinant backbone containing an unnatural amino acid by protein trans-splicing and intramolecular oxime ligation, respectively. A pH-shift protocol was applied to accelerate on surface cyclization. This method will enable generation of semisynthetic cyclic peptide libraries and their selection by fluorescence-activated cell sorting.

Semisynthetic head-to-tail cyclized peptides obtained by combining protein trans-splicing and intramolecular expressed protein ligation

A dual-intein approach for the preparation of head-to-tail macrocyclic peptides is reported, where synthetic and genetically encoded fragments are ligated by two native peptide bonds. A split intein ligates the synthetic and genetically encoded peptides via protein trans-splicing and is followed by intramolecular cyclization through an expressed protein ligation step mediated with a cis-intein. We identified a suitable pair of orthogonal inteins and optimized the conditions for a one-pot cyclization protocol. We report the semisynthesis of model macrocyles with various ring sizes and of the natural product sunflower trypsin inhibitor (SFTI) along with its ornithine analog.

In Cellulo Protein Semi-Synthesis from Endogenous and Exogenous Fragments Using the Ultra-Fast Split Gp41-1 Intein

Protein semi-synthesis inside live cells from exogenous and endogenous parts offers unique possibilities for studying proteins in their native context. Split-intein-mediated protein trans-splicing is predestined for such endeavors and has seen some successes, but a much larger variety of established split inteins and associated protocols is urgently needed. We characterized the association and splicing parameters of the Gp41-1 split intein, which favorably revealed a nanomolar affinity between the intein fragments combined with the exceptionally fast splicing rate. Following bead-loading of a chemically modified intein fragment precursor into live mammalian cells, we fluorescently labeled target proteins on their N- and C-termini with short peptide tags, thus ensuring minimal perturbation of their structure and function. In combination with a nuclear-entrapment strategy to minimize cytosolic fluorescence background, we applied our technique for super-resolution imaging and single-particle tracking of the outer mitochondrial protein Tom20 in HeLa cells.

A functional interplay between intein and extein sequences in protein splicing compensates for the essential block B histidine

Steric bulk can compensate for a catalytically critical histidine in an intein's active site and promote the N–S acyl shift.

Inteins remove themselves from a precursor protein by protein splicing. Due to the concomitant structural changes of the host protein, this self-processing reaction has enabled many applications in protein biotechnology and chemical biology. We show that the evolved M86 mutant of the Ssp DnaB intein displays a significantly improved tolerance towards non-native amino acids at the N-terminally flanking (–1) extein position compared to the parent intein, in the form of both an artificially trans-splicing split intein and the cis-splicing mini-intein. Surprisingly, side chains with increased steric bulk compared to the native Gly(–1) residue, including d-amino acids, were found to compensate for the essential block B histidine in His73Ala mutants in the initial N–S acyl shift of the protein splicing pathway. In the case of the M86 intein, large (–1) side chains can even rescue protein splicing activity as a whole. With the comparison of three crystal structures, namely of the M86 intein as well as of its Gly(–1)Phe and Gly(–1)Phe/His73Ala mutants, our data supports a model in which the intein's active site can exert a strain by varying mechanisms on the different angles of the scissile bond at the extein–intein junction to effect a ground-state destabilization. The compensatory mechanism of the block B histidine is the first example for the direct functional role of an extein residue in protein splicing. It sheds new light on the extein–intein interplay and on possible consequences of their co-evolution as well as on the laboratory engineering of improved inteins.

Altered Coordination of Individual Catalytic Steps in Different and Evolved Inteins Reveals Kinetic Plasticity of the Protein Splicing Pathway

Protein splicing performed by inteins provides powerful opportunities to manipulate protein structure and function, however, detailed mechanistic knowledge of the multistep pathway to help engineering optimized inteins remains scarce. A typical intein has to coordinate three steps to maximize the product yield of ligated exteins. We have revealed a new type of coordination in the Ssp DnaB intein, in which the initial N- S acyl shift appears rate-limiting and acts as an up-regulation switch to dramatically accelerate the last step of succinimide formation, which is thus coupled to the first step. The structure-activity relationship at the N-terminal scissile bond was studied with atomic precision using a semisynthetic split intein. We show that the removal of the extein acyl group from the α-amino moiety of the intein's first residue is strictly required and sufficient for the up-regulation switch. Even an acetyl group as the smallest possible extein moiety completely blocked the switch. Furthermore, we investigated the M86 intein, a mutant with faster splicing kinetics previously obtained by laboratory evolution of the Ssp DnaB intein, and the individual impact of its eight mutations. The succinimide formation was decoupled from the first step in the M86 intein, but the acquired H143R mutation acts as a brake to prevent premature C-terminal cleavage and thereby maximizes splicing yields. Together, these results revealed a high degree of plasticity in the kinetic coordination of the splicing pathway. Furthermore, our study led to the rational design of improved M86 mutants with the highest yielding trans-splicing and fastest trans-cleavage activities.

Development of a screening system for inteins active in protein splicing based on intein insertion into the LacZα-peptide

Protein splicing by inteins has found diverse applications in biotechnology, protein chemistry and chemical biology. Inteins display a wide range of efficiencies and rates unpredictable from their amino acid sequences. Here, we identified positions T22S and S35 in the LacZα peptide as intein insertion sites that strictly require protein splicing, in contrast to cleavage side-reactions, to allow for complementation of β-galactosidase activity. Both the cis-variant of the M86 mutant of the Ssp DnaB intein and a split form undergoing protein trans-splicing gave rise to formation of blue colonies in the β-galactosidase read-out. Furthermore, we report the two novel, naturally split VidaL T4Lh-1 and VidaL UvsX-2 inteins whose N-terminal fragments consist of only 15 and 16 amino acids, respectively. Initial biochemical characterization with the LacZα host system of these inteins further underlines its utility. Finally, we used the LacZα host system to rapidly identify amino acid substitutions from a small randomized library at the structurally conserved intein position 2 next to the catalytic center, that are tolerated for protein splicing activity of the M86 intein. These findings demonstrate the potential of the system for initial testing and directed evolution of inteins.

N-terminal chemical protein labeling using the naturally split GOS-TerL intein

Chemoselective and regioselective chemical protein labeling is of great importance, yet no current technique is sufficiently general and simple to perform. Protein trans-splicing by split inteins can be used to ligate short tags with chemical labels to either the N or the C terminus of a protein. The CysTag approach exploits split intein fragments without a cysteine fused with such a short tag containing a single cysteine that is easily amenable to selective modification using classical cysteine bioconjugation. Labeling of the protein of interest is achieved through transfer of the pre-labeled tag by protein trans-splicing. This protocol keeps other cysteines unmodified. While split inteins for C-terminal CysTag labeling were previously reported, no high-yielding and naturally split intein for N-terminal labeling has been available. In this work, the recently discovered GOS-TerL intein was explored as the only known naturally split intein that both lacks a cysteine in its N-terminal fragment and is active under ambient conditions. Thioredoxin as a model protein and a camelid nanobody were labeled with a synthetic fluorophore by transferring the pre-labeling CysTag in the protein trans-splicing reaction with yields of about 50 to 90%. The short N-terminal intein fragment was also chemically synthesized with a tag to enable protein labeling by semi-synthetic protein trans-splicing. Our results expand the scope of the CysTag labeling strategy, which achieves selective chemical modification without the requirement for sophisticated biorthogonal functional groups and rather builds on the plethora of commercially available reagents directed at the thiol side chain of cysteine. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

Preparation of Semisynthetic Peptides Macrocycles Using Split Inteins

Cyclic peptides are highly desired molecules not only for basic research but also for many biomedical and pharmacological applications. Due to their potentially superior physicochemical properties as compared to their linear counterparts, they are considered as ideal candidates for studying protein-protein interactions, among others. Most of the methods developed in recent years to prepare cyclic peptides focus either on a synthetic or a recombinant route. While the former provides access to diversified, noncanonical peptides, including unnatural and D-amino acid, for example, the latter can harness the power of genetic randomization to generate and select from large peptide libraries. Only few approaches have been reported to prepare semisynthetic macrocycles that would benefit from both the advantages associated with synthetic and genetically encoded parts. We describe in this chapter a chemo-enzymatic method to make semisynthetic cyclic peptides in vitro from two fragments using protein trans-splicing and bioorthogonal oxime ligation.

Nanomolar affinity protein trans-splicing monitored in real-time by fluorophore–quencher pairs

We combined high-affinity protein trans-splicing with fluorophore/quencher pairs for online detection of covalent N-terminal ‘traceless’ protein labeling at nanomolar concentrations under physiological conditions in cellular environment.

'Traceless' tracing of proteins - high-affinity trans-splicing directed by a minimal interaction pair

Using a minimal lock-and-key element the affinity between the intein fragments for N-terminal protein trans-splicing was significantly increased, allowing for site-specific, ‘traceless’ covalent protein labeling in living mammalian cells at nanomolar probe concentrations.

Protein trans-splicing mediated by split inteins is a powerful technique for site-specific protein modification. Despite recent developments there is still an urgent need for ultra-small high-affinity intein tags for in vitro and in vivo approaches. To date, only very few in-cell applications of protein trans-splicing have been reported, all limited to C-terminal protein modifications. Here, we developed a strategy for covalent N-terminal intein-mediated protein labeling at (sub) nanomolar probe concentrations. Combined with a minimal synthetic lock-and-key element, the affinity between the intein fragments was increased more than 50-fold to 10 nM. Site-specific and efficient ‘traceless’ protein modification by high-affinity trans-splicing is demonstrated at nanomolar concentrations in living mammalian cells.

An Unprecedented Combination of Serine and Cysteine Nucleophiles in a Split Intein with an Atypical Split Site

Protein splicing mediated by inteins is a self-processive reaction leading to the excision of the internal intein domain from a precursor protein and the concomitant ligation of the flanking sequences, the extein-N and extein-C parts, thereby reconstituting the host protein. Most inteins employ a splicing pathway in which the upstream scissile peptide bond is consecutively rearranged into two thioester or oxoester intermediates before intein excision and rearrangement into the new peptide bond occurs. The catalytically critical amino acids involved at the two splice junctions are cysteine, serine, or threonine. Notably, the only potential combination not observed so far in any of the known or engineered inteins corresponds to the transesterification from an oxoester to a thioester, which suggested that this formal uphill reaction with regard to the thermodynamic stability might be incompatible with intein-mediated catalysis. We show that corresponding mutations also led to inactive gp41-1 and AceL-TerL inteins. We report the novel GOS-TerL split intein identified from metagenomic databases as the first intein harboring the combination of Ser1 and Cys+1 residues. Mutational analysis showed that its efficient splicing reaction indeed follows the shift from oxoester to thioester and thus represents a rare diversion from the canonical pathway. Furthermore, the GOS-TerL intein has an atypical split site close to the N terminus. The Int(N) fragment could be shortened from 37 to 28 amino acids and exchanged with the 25-amino acid Int(N) fragment from the AceL-TerL intein, indicating a high degree of promiscuity of the Int(C) fragment of the GOS-TerL intein.

Ligation of synthetic peptides to proteins using semisynthetic protein trans-splicing

Protein trans-splicing using split inteins is a powerful and convenient reaction to chemically modify recombinantly expressed proteins under mild conditions. In particular, semisynthetic protein trans-splicing with one intein fragment short enough to be accessible by solid-phase peptide synthesis can be used to transfer a short peptide segment with the desired synthetic moiety to the protein of interest. In this chapter, we provide detailed protocols for two such split intein systems. The M86 mutant of the Ssp DnaB intein and the MX1 mutant of the AceL-TerL intein are two highly engineered split inteins with very short N-terminal intein fragments of only 11 and 25 amino acids, respectively, and allow the efficient N-terminal labeling of proteins.

Traceless splicing enabled by substrate-induced activation of the Nostoc punctiforme Npu DnaE intein after mutation of a catalytic cysteine to serine

Inteins self-catalytically cleave out of precursor proteins while ligating the surrounding extein fragments with a native peptide bond. Much attention has been lavished on these molecular marvels with the hope of understanding and harnessing their chemistry for novel biochemical transformations including coupling peptides from synthetic or biological origins and controlling protein function. Despite an abundance of powerful applications, the use of inteins is still hampered by limitations in our understanding of their specificity (defined as flanking sequences that permit splicing) and the challenge of inserting inteins into target proteins. We examined the frequently used Nostoc punctiforme Npu DnaE intein after the C-extein cysteine nucleophile (Cys+1) was mutated to serine or threonine. Previous studies demonstrated reduced rates and/or splicing yields with the Npu DnaE intein after mutation of Cys+1 to Ser+1. In this study, genetic selection identified extein sequences with Ser+1 that enabled the Npu DnaE intein to splice with only a 5-fold reduction in rate compared to the wild-type Cys+1 intein and without mutation of the intein itself to activate Ser+1 as a nucleophile. Three different proteins spliced efficiently after insertion of the intein flanked by the selected sequences. We then used this selected specificity to achieve traceless splicing in a targeted enzyme at a location predicted by primary sequence similarity to only the selected C-extein sequence. This study highlights the latent catalytic potential of the Npu DnaE intein to splice with an alternative nucleophile and enables broader intein utility by increasing insertion site choices.

Click-tag and amine-tag: chemical tag approaches for efficient protein labeling in vitro and on live cells using the naturally split Npu DnaE intein

Protein labeling with synthetic moieties remains in many cases a technically challenging or unresolved task. Two new and simple concepts are presented. In both approaches, a very short tag of only a few amino acids is prepared with the desired chemical modification and, in a second step, it is transferred to the protein of interest by protein trans-splicing. For the amine-tag, a recombinant intein fragment free of lysine residues was generated such that the amine group of the N terminus could be selectively modified with regular amine-reactive reagents. Thus, standard bioconjugation procedures without any chemical synthesis could be applied without modification of lysines in the protein of interest. For the click-tag, protein trans-splicing was combined with unnatural amino acid mutagenesis and subsequent bioorthogonal side chain modification, as demonstrated for click chemistry using p-azidophenylalanine. By the two-step strategy, exposure of the protein of interest to the copper catalyst was avoided.

SPLICEFINDER - a fast and easy screening method for active protein trans-splicing positions

Split intein enabled protein trans-splicing (PTS) is a powerful method for the ligation of two protein fragments, thereby paving the way for various protein modification or protein function control applications. PTS activity is strongly influenced by the amino acids directly flanking the splice junctions. However, to date no reliable prediction can be made whether or not a split intein is active in a particular foreign extein context. Here we describe SPLICEFINDER, a PCR-based method, allowing fast and easy screening for active split intein insertions in any target protein. Furthermore we demonstrate the applicability of SPLICEFINDER for segmental isotopic labeling as well as for the generation of multi-domain and enzymatically active proteins.