Position-specific modification with imidazolyl group on10-23 DNAzyme realized catalytic activity enhancement

Selection of M2+-independent RNA-cleaving DNAzymes with Sidechains Mimicking Arginine and Lysine

Sequence-specific cleavage of RNA by nucleic acid catalysts in the absence of a divalent metal cation (M 2+ ) has remained an important goal in biomimicry with potential therapeutic applications. Given the lack of functional group diversity in canonical nucleotides, modified nucleotides with amino acid-like side chains were used to enhance self-cleavage rates at a single embedded ribonucleoside site. Previous works relied on three functional groups: an amine, a guanidine and an imidazole ensconced on three different nucleosides. However, to date, few studies have systematically addressed the necessity of all three modifications, as the value of any single modified nucleoside is contextualized at the outset of selection. Herein, we report on the use of only two modified dNTPs, excluding an imidazole, i.e. 5-(3-guanidinoallyl)-2'-dUTP (dU ga TP) and 5-aminoallyl-2'-dCTP (dC aa TP), to select in-vitro self-cleaving DNAzymes that cleave in the absence of M 2+ in a pH-independent fashion. Cleavage shows biphasic kinetics with rate constants that are significantly higher than in unmodified DNAzymes and compare favorably to certain DNAzymes involving an imidazole. This work is the first report of a M2+-independent DNAzyme with two cationic modifications; as such it shows appreciable self-cleaving activity in the absence of an imidazole modification.

Label-Free and Sensitive Electrochemical Biosensor for Amplification Detection of Target Nucleic Acids Based on Transduction Hairpins and Three-Leg DNAzyme Walkers

Nucleic acids are regarded as reliable biomarkers for the early diagnosis of various diseases. By ingeniously combining a transduction hairpin (THP) with the toehold-mediated strand displacement reaction (TSDR) to form three-leg DNAzyme walkers, for the first time, we constructed a label-free and sensitive electrochemical sensing system for the amplification detection of target nucleic acids. With microRNA-155 (miR-155) as a model target, the feasibility of the biosensing strategy and the conformational states of DNA in the recognition process were studied in detail on the basis of electrochemical and dual polarization interferometry techniques. With the assistance of THP, miR-155 indirectly triggered the TSDR between three hairpins (H1, H2, and H3), then massive Mg2+-dependent three-leg DNAzyme walkers were formed in aqueous solutions. After the binding/cleaving/moving process of three-leg DNAzyme walkers on the electrode surface modified with substrate hairpins (SHPs), a number of single-stranded DNAs (ssDNAs) were generated. Hence, the interaction of methylene blue (MB) with the duplex section of SHPs was impeded, which brought about a decreased electrochemical signal. Benefiting from the cyclic amplification of the TSDR and the higher cleavage activity of three-leg DNAzyme walkers, the proposed sensing strategy showed remarkable improvement in sensitivity with a low detection limit of 0.27 fM for miR-155. Owing to the precise design of the THP, this method exhibited excellent specificity to distinguish miR-155 from the single-base and triplex-base mismatched sequences. This sensing strategy importing the flexible THP can be utilized to detect various nucleic acid biomarkers by only redesigning the THP without changing the main circuit or reporter constructs, showing the great versatility and potential for the early diagnostics and biological analysis.

Insight into an Oxidative DNA-Cleaving DNAzyme: Multiple Cofactors, the Catalytic Core Map and a Highly Efficient Variant

An oxidative DNA-cleaving DNAzyme (PL) employs a double-cofactor model “X/Cu²⁺” for catalysis. Herein, we verified that reduced nicotinamide adenine dinucleotide (NADH), flavin mononucleotide, cysteine, dithiothreitol, catechol, resorcinol, hydroquinone, phloroglucinol, o-phenylenediamine, 3,3′,5,5'-tetramethylbenzidine, and hydroxylamine acted as cofactor X. According to their structural similarities or fluorescence property, we further confirmed that reduced nicotinamide adenine dinucleotide phosphate (NADPH), 2-mercaptoethanol, dopamine, chlorogenic acid, resveratrol, and 5-carboxyfluorescein also functioned as cofactor X. Superoxide anions might be the commonality behind these cofactors. We subsequently determined the conservative change of individual nucleotides in the catalytic core under four different cofactor X. The nucleotides A4 and C5 are highly conserved, whereas the conservative levels of other nucleotides are dependent on the types of cofactor X. Moreover, we observed that the minor change in the PL's secondary structure affects electrophoretic mobility. Finally, we characterized a highly efficient variant T3G and converted its double-cofactor NADH/Cu²⁺ to sole-cofactor NADH.

•

An oxidative cleavage DNAzyme works with various cofactor X

•

Catalytic nucleotide conservation fluctuates with different cofactor X

•

The PL DNAzyme's minor secondary structure change affects electrophoretic mobility

•

Double-cofactor model of the variant T3G can be converted to sole-cofactor model

Molecular Features and Metal Ions That Influence 10-23 DNAzyme Activity

Deoxyribozymes (DNAzymes) with RNA hydrolysis activity have a tremendous potential as gene suppression agents for therapeutic applications. The most extensively studied representative is the 10-23 DNAzyme consisting of a catalytic loop and two substrate binding arms that can be designed to bind and cleave the RNA sequence of interest. The RNA substrate is cleaved between central purine and pyrimidine nucleotides. The activity of this DNAzyme in vitro is considerably higher than in vivo, which was suggested to be related to its divalent cation dependency. Understanding the mechanism of DNAzyme catalysis is hindered by the absence of structural information. Numerous biological studies, however, provide comprehensive insights into the role of particular deoxynucleotides and functional groups in DNAzymes. Here we provide an overview of the thermodynamic properties, the impact of nucleobase modifications within the catalytic loop, and the role of different metal ions in catalysis. We point out features that will be helpful in developing novel strategies for structure determination and to understand the mechanism of the 10-23 DNAzyme. Consideration of these features will enable to develop improved strategies for structure determination and to understand the mechanism of the 10-23 DNAzyme. These insights provide the basis for improving activity in cells and pave the way for developing DNAzyme applications.

Site-specific functionalization with amino, guanidinium, and imidazolyl groups enabling the activation of 10–23 DNAzyme

10–23 DNAzyme has been extensively explored as a therapeutic and biotechnological tool, as well as in DNA computing. Faster cleavage or transformation is always needed. The present research displays a rational modification approach for a more efficient DNAzyme. In the catalytic core, amino, guanidinium and imidazolyl groups were introduced for its chemical activation through the adenine base. Among the six adenine residues, A9 is the unique residue that realizes all the positive effects; the 6-amino and 8-position of adenine and the 7-position of 8-aza-7-deaza-adenine could be used for the introduction of the functional groups. A12 is a new choice for catalytic improvement with an 8-substituent. Therefore, more active DNAzymes could be expected by this nucleobase-modified activation approach.

Chemical activation of 10–23 DNAzyme was realized at A9 modified with active functional groups amino, guanidinium, and imidazolyl groups.

Enhancing Catalytic Activity of Uranyl-Dependent DNAzyme by Flexible Linker Insertion for More Sensitive Detection of Uranyl Ion

The uranyl-dependent DNAzyme 39E cleaves its nucleic acid substrate in the presence of uranyl ion (UO₂²⁺). It has been widely utilized in many sensor designs for selective and sensitive detection of UO₂²⁺ in the environment and inside live cells. In this work, by inserting a flexible linker (C3 Spacer) into one critical site (A₂₀) of the 39E catalytic core, we successfully enhanced the original catalytic activity of 39E up to 8.1-fold at low UO₂²⁺ concentrations. Applying such a modified DNAzyme (39E-A₂₀-C3) in a label-free fluorescent sensor for UO₂²⁺ detection achieved more than 1 order of magnitude sensitivity enhancement over using native 39E, with the UO₂²⁺ detection limit improved from 2.6 nM (0.63 ppb) to 0.19 nM (0.047 ppb), while the high selectivity to UO₂²⁺ over other metal ions was fully preserved. The method was also successfully applied for the detection of UO₂²⁺-spiked environmental water samples to demonstrate its practical usefulness.

Development of Visible-Light-Responsive RNA Scissors Based on a 10-23 DNAzyme

The 10-23 DNAzyme is an artificially developed functional oligonucleotide that can cleave RNA in a sequence-specific manner. In this study, we designed a new photo-driven DNAzyme incorporating a photoresponsive DNA overhang complementary to the catalytic core region. The photoresponsive overhang region of the DNAzyme included either azobenzene components (Azos) or 2,6-dimethyl-4-(methylthio)azobenzene units (SDM-Azos) each attached to a d-threoninol linker. When the Azos or SDM-Azos were in the trans form, the photoresponsive DNA overhang hybridized with the DNAzyme, and the RNA cleavage activity was suppressed. cis Isomerization of Azos or SDM-Azos, induced by 365 or 400 nm light, respectively, destabilized the duplex between the photoresponsive overhang and the catalytic core, and the DNAzyme recovered RNA cleavage activity. Reversible photoswitching of the DNAzyme activity was achieved by use of specific light irradiation. Further, light-dependent photoswitching of protein expression in the presence of the DNAzyme was demonstrated. Thus, this photo-driven DNAzyme has potential for application as a photocontrolled gene silencing system and a photoactivatable gene expression system.

Conformational studies of 10-23 DNAzyme in solution through pyrenyl-labeled 2'-deoxyadenosine derivatives

10-23 DNAzyme is a small catalytic DNA molecule. Studies on its conformation in solution are critical for understanding its catalytic mechanism and functional optimization. Based on our previous research, two fluorescent nucleoside analogues 1 and 2 were designed for the introduction of a pyrenyl group at one of the five dA residues in the catalytic core and the unpaired adenosine residue in its full-DNA substrate, respectively. Ten pyrenyl-pyrenyl pairs are formed in the DNAzyme-substrate complexes in solution for sensing the spacial positions of the five dA residues relative to the cleavage site using fluorescence spectra. The position-dependent quenching effect of pyrene emission fluorescence by nucleobases, especially the pyrenyl-pyrenyl interaction, was observed for some positions. The adenine residues in the 3'-part of the catalytic loop seem to be closer to the cleavage site than the adenine residues in the 5'-part, which is consistent with the molecular dynamics simulation result. The catalytic activities and T_m changes also confirmed the effect of the pyrenyl-nucleobase and pyrenyl-pyrenyl pair interactions. Together with functional group mutations, catalytically relevant nucleobases will be identified for understanding the catalytic mechanism of 10-23 DNAzyme.

A densely modified M2+-independent DNAzyme that cleaves RNA efficiently with multiple catalytic turnover

Sequence-specific cleavage of RNA targets in the absence of a divalent metal cation (M²⁺) has been a long-standing goal in bioorganic chemistry. Herein, we report the in vitro selection of novel RNA cleaving DNAzymes that are selected using 8-histaminyl-deoxyadenosine (dA^imTP), 5-guanidinoallyl-deoxyuridine (dU^gaTP), and 5-aminoallyl-deoxycytidine (dC^aaTP) along with dGTP. These modified dNTPs provide key functionalities reminiscent of the active sites of ribonucleases, notably RNase A. Of several such M²⁺-free DNAymes, DNAzyme 7-38-32 cleaves a 19 nt all-RNA substrate with multiple-turnover, under simulated physiological conditions wherein only 0.5 mM Mg²⁺ was present, attaining values of k_cat of 1.06 min^-1 and a K_M of 1.37 μM corresponding to a catalytic efficiency of ∼10⁶ M^-1 min^-1. Therefore, Dz7-38-32 represents a promising candidate towards the development of therapeutically efficient DNAzymes.

Synthesis, crystallization and preliminary crystallographic analysis of a 52-nucleotide DNA/2'-OMe-RNA oligomer mimicking 10-23 DNAzyme in the complex with a substrate

A 52-nucleotide DNA/2'-OMe-RNA oligomer mimicking 10-23 DNAzyme in the complex with its substrate was synthesized, purified and crystallized by the hanging-drop method using 0.8 M sodium potassium tartrate as a precipitant. A data set to 1.21 Å resolution was collected from a monocrystal at 100 K using synchrotron radiation on a beamline BL14.1 at BESSY. The crystal belonged to the P2₁ group with unit-cell a = 49.42, b = 24.69, c = 50.23, β = 118.48.

Probing the effect of minor groove interactions on the catalytic efficiency of DNAzymes 8-17 and 10-23

DNAzymes (Dz) 8-17 and 10-23 are two widely studied and well-characterized RNA-cleaving DNA catalysts. In an effort to further improve the understanding of the fragile interactions and dynamics of the enzymatic mechanism, this study examines the catalytic efficiency of minimally modified DNAzymes. Five single mutants of Dz8-17 and Dz10-23 were prepared by replacing the adenine residues in the corresponding catalytic cores with 3-deazaadenine units. Kinetic assays were used to assess the effect on the catalytic activity and thereby identify the importance of hydrogen bonding that arises from the N3 atoms. The results suggest that modifications at A15 and A15.0 of Dz8-17 have a significant influence and show a reduction in catalytic activity. Modification at each location in Dz10-23 results in a decrease of the observed rate constants, with A12 appearing to be the most affected with a reduction of ∼80% of kobs and ∼25% of the maximal cleavage rate compared to the wild-type DNAzyme. On the other hand, modification of A12 in Dz8-17 showed an ∼130% increase in kobs, thus unraveling a new potential site for the introduction of chemical modifications. A pH-profile analysis showed that the chemical cleavage step is rate-determining, regardless of the presence and/or location of the mutation. These findings point towards the importance of the N3-nitrogens of certain adenine nucleotides located within the catalytic cores of the DNAzymes for efficient catalytic activity and further suggest that they might directly partake in maintaining the appropriate tertiary structure. Therefore, it appears that minor groove interactions constitute an important feature of DNAzymes as well as ribozymes.

Spatial conservation studies of nucleobases in 10–23 DNAzyme by 2′-positioned isonucleotides and enantiomers for increased activity

d-/l-Isonucleotides were used to modify the catalytic core and recognition arms of 10–23 DNAzyme and prominently improved its bioactivity.

Studies on the preferred uracil-adenine base pair at the cleavage site of 10-23 DNAzyme by functional group modifications on adenine

10-23 DNAzyme is capable of catalytically cleaving RNA substrates with the preferred cleavage sites rAU and rGU, in which the common base pair U-dA0 forms between the substrate and the DNAzyme in the cleavage reaction. Here its conservation was studied with base modifications on dA and extra functional groups introduced. The nitrogen atom at 7- or 8-position of adenine was demonstrated to be equally important for the cleavage reaction, although it is not related to the thermal stability of the base pair. Deletion of 6-amino group led to decreased stability of the base pair and a slight slower reaction rate. Extra functional groups through 6-amino group were not favorably accommodated in the cleavage site. From these modifications at the level of functional groups, it demonstrated that the base pair U-dA0 not only contributes to the recognition and binding stability, but also it is involved in the active catalytic center by its functional groups and base stacking. This kind of chemical modifications with 7-substituted 8-aza-7-deaza-2'-deoxyadenosine at dA0 is favorable for the introduction of signal molecules for mechanistic studies and biological applications, without significant loss of the catalytic function and structural destruction.