Synthesis of pacidamycin analogues via an Ugi-multicomponent reaction

Recent developments in the total synthesis of natural products using the Ugi multicomponent reactions as the key strategy

The total syntheses of selected natural products using different versions of the Ugi multicomponent reaction is reviewed on a case-by-case basis. The revision covers the period 2008-2023 and includes detailed descriptions of the synthetic sequences, the use of state-of-the-art chemical reagents and strategies, as well as the advantages and limitations of the transformation and some remedial solutions. Relevant data on the isolation and bioactivity of the different natural targets are also briefly provided. The examples clearly evidence the strategic importance of this transformation and its key role in the modern natural products synthetic chemistry toolbox. This methodology proved to be a valuable means for easily building molecular complexity and efficiently delivering step-economic syntheses even of intricate structures, with a promising future.

Stereoselective Synthesis of (E)- and (Z)-Isocyanoalkenes

(E)- and (Z)-isocyanoalkenes were selectively synthesized via the sequential cross coupling of vinyl iodides with formamide, followed by dehydration. The optimal catalyst, generated in situ from CuII and trans-N,N'-dimethyl-1,2-cyclohexanediamine, rapidly coupled (E)- or (Z)-vinyl iodides with formamide, which minimized the isomerization of the resultant vinyl formamide. The method efficiently provided a range of acyclic, carbocyclic, and heterocyclic isocyanoalkenes; the versatility is illustrated with the selective, stereodivergent syntheses of the diastereomeric isocyanoalkene antibiotics, B371 and E-B371.

Total synthesis of pseudouridimycin and its epimer via Ugi-type multicomponent reaction

A total synthesis of pseudouridimycin (1) was accomplished featuring an unusual oxime Ugi-type multicomponent condensation to simultaneously construct the dipeptide moiety of this peptidyl nucleoside antibiotic. In this synthetic route 1 is readily accessible via a longest linear sequence of 9 synthetic steps from pseudouridine. This strategy can be applicable to a variety of pseudouridimycin analogues.

Merging Natural Products: Muraymycin-Sansanmycin Hybrid Structures as Novel Scaffolds for Potential Antibacterial Agents

To overcome bacterial resistances, the need for novel antimicrobial agents is urgent. The class of so-called nucleoside antibiotics furnishes promising candidates for the development of new antibiotics, as these compounds block a clinically unexploited bacterial target: the integral membrane protein MraY, a key enzyme in cell wall (peptidoglycan) biosynthesis. Nucleoside antibiotics exhibit remarkable structural diversity besides their uridine-derived core motifs. Some sub-classes also show specific selectivities towards different Gram-positive and Gram-negative bacteria, which are poorly understood so far. Herein, the synthesis of a novel hybrid structure is reported, derived from the 5'-defunctionalized uridine core moiety of muraymycins and the peptide chain of sansanmycin B, as a new scaffold for the development of antimicrobial agents. The reported muraymycin-sansanmycin hybrid scaffold showed nanomolar activity against the bacterial target enzyme MraY, but displayed no significant antibacterial activity against S. aureus, E. coli, and P. aeruginosa.

Two decades of recent advances of Ugi reactions: synthetic and pharmaceutical applications

Multicomponent reactions (MCRs) are powerful synthetic tools in which more than two starting materials couple with each other to form multi-functionalized compounds in a one-pot process, the so-called "tandem", "domino" or "cascade" reaction, or utilizing an additional step without changing the solvent, the so-called a sequential-addition procedure, to limit the number of synthetic steps, while increasing the complexity and the molecular diversity, which are highly step-economical reactions. The Ugi reaction, one of the most common multicomponent reactions, has recently fascinated chemists with the high diversity brought by its four- or three-component-based isonitrile. The Ugi reaction has been introduced in organic synthesis as a novel, efficient and useful tool for the preparation of libraries of multifunctional peptides, natural products, and heterocyclic compounds with stereochemistry control. In this review, we highlight the recent advances of the Ugi reaction in the last two decades from 2000-2019, mainly in the synthesis of linear or cyclic peptides, heterocyclic compounds with versatile ring sizes, and natural products, as well as the enantioselective Ugi reactions. Meanwhile, the applications of these compounds in pharmaceutical trials are also discussed.

Elucidating the Structural Requirement of Uridylpeptide Antibiotics for Antibacterial Activity

The synthesis and biological evaluation of analogues of uridylpeptide antibiotics were described, and the molecular interaction between the 3'-hydroxy analogue of mureidomycin A (3'-hydroxymureidomycin A) and its target enzyme, phospho-MurNAc-pentapeptide transferase (MraY), was analyzed in detail. The structure-activity relationship (SAR) involving MraY inhibition suggests that the side chain at the urea-dipeptide moiety does not affect the MraY inhibition. However, the anti-Pseudomonas aeruginosa activity is in great contrast and the urea-dipeptide motif is a key contributor. It is also suggested that the nucleoside peptide permease NppA1A2BCD is responsible for the transport of 3'-hydroxymureidomycin A into the cytoplasm. A systematic SAR analysis of the urea-dipeptide moiety of 3'-hydroxymureidomycin A was further conducted and the antibacterial activity was determined. This study provides a guide for the rational design of analogues based on uridylpeptide antibiotics.

Phenylalanine meta-Hydroxylase: A Single Residue Mediates Mechanistic Control of Aromatic Amino Acid Hydroxylation

The rare nonproteinogenic amino acid, meta‐l‐tyrosine is biosynthetically intriguing. Whilst the biogenesis of tyrosine from phenylalanine is well characterised, the mechanistic basis for meta‐hydroxylation is unknown. Herein, we report the analysis of 3‐hydroxylase (Phe3H) from Streptomyces coeruleorubidus. Insights from kinetic analyses of the wild‐type enzyme and key mutants as well as of the biocatalytic conversion of synthetic isotopically labelled substrates and fluorinated substrate analogues advance understanding of the process by which meta‐hydroxylation is mediated, revealing T202 to play an important role. In the case of the WT enzyme, a deuterium label at the 3‐position is lost, whereas in in the T202A mutant 75 % retention is observed, with loss of stereospecificity. These data suggest that one of two possible mechanisms is at play; direct, enzyme‐catalysed deprotonation following electrophilic aromatic substitution or stereospecific loss of one proton after a 1,2‐hydride shift. Furthermore, our kinetic parameters for Phe3H show efficient regiospecific generation of meta‐l‐tyrosine from phenylalanine and demonstrate the enzyme's ability to regiospecifically hydroxylate unnatural fluorinated substrates.

Bacterial phosphoglycosyl transferases: initiators of glycan biosynthesis at the membrane interface

Phosphoglycosyl transferases (PGTs) initiate the biosynthesis of both essential and virulence-associated bacterial glycoconjugates including lipopolysaccharide, peptidoglycan and glycoproteins. PGTs catalyze the transfer of a phosphosugar moiety from a nucleoside diphosphate sugar to a polyprenol phosphate, to form a membrane-bound polyprenol diphosphosugar product. PGTs are integral membrane proteins, which include between 1 and 11 predicted transmembrane domains. Despite this variation, common motifs have been identified in PGT families through bioinformatics and mutagenesis studies. Bacterial PGTs represent important antibacterial and virulence targets due to their significant role in initiating the biosynthesis of key bacterial glycoconjugates. Considerable effort has gone into mechanistic and inhibition studies for this class of enzymes, both of which depend on reliable, high-throughput assays for easy quantification of activity. This review summarizes recent advances made in the characterization of this challenging but important class of enzymes.

Sansanmycin natural product analogues as potent and selective anti-mycobacterials that inhibit lipid I biosynthesis

Tuberculosis (TB) is responsible for enormous global morbidity and mortality, and current treatment regimens rely on the use of drugs that have been in use for more than 40 years. Owing to widespread resistance to these therapies, new drugs are desperately needed to control the TB disease burden. Herein, we describe the rapid synthesis of analogues of the sansanmycin uridylpeptide natural products that represent promising new TB drug leads. The compounds exhibit potent and selective inhibition of Mycobacterium tuberculosis, the etiological agent of TB, both in vitro and intracellularly. The natural product analogues are nanomolar inhibitors of Mtb phospho-MurNAc-pentapeptide translocase, the enzyme responsible for the synthesis of lipid I in mycobacteria. This work lays the foundation for the development of uridylpeptide natural product analogues as new TB drug candidates that operate through the inhibition of peptidoglycan biosynthesis.

Drug resistant tuberculosis (TB) infections are emerging at a high rate, with only few therapeutic options currently available. Here, the authors report synthetic analogues of the natural product sansanmycin that target mycobacterial cell wall biosynthesis and represent potent leads for improved anti-TB treatments.

Inhibition of phospho-MurNAc-pentapeptide translocase (MraY) by nucleoside natural product antibiotics, bacteriophage ϕX174 lysis protein E, and cationic antibacterial peptides

This review covers recent developments in the inhibition of translocase MraY and related phospho-GlcNAc transferases WecA and TagO, and insight into the inhibition and catalytic mechanism of this class of integral membrane proteins from the structure of Aquifex aeolicus MraY. Recent studies have also identified a protein-protein interaction site in Escherichia coli MraY, that is targeted by bacteriophage ϕX174 lysis protein E, and also by cationic antimicrobial peptides containing Arg-Trp close to their N- or C-termini.

Multicomponent reactions in nucleoside chemistry

This review covers sixty original publications dealing with the application of multicomponent reactions (MCRs) in the synthesis of novel nucleoside analogs. The reported approaches were employed for modifications of the parent nucleoside core or for de novo construction of a nucleoside scaffold from non-nucleoside substrates. The cited references are grouped according to the usually recognized types of the MCRs. Biochemical properties of the novel nucleoside analogs are also presented (if provided by the authors).

Cu-mediated enamide formation in the total synthesis of complex peptide natural products

Cu-mediated C(sp(2))-N bond formation has received intense interest recently, and has been applied to the total synthesis of a wide variety of structurally complex natural products. This review covers the synthetic assembly of peptide natural products in which Cu-mediated enamide formation is the key transformation. The total syntheses of cyclopeptide alkaloids, pacidamycin D, and yaku'amide A exemplify the versatility of the Cu-catalyzed cross-coupling reaction in comparison to other synthetic methods.