A highly sensitive fluorescent viscosity sensor

Julolidine based red emitting ESIPT/AIE active material showing luminescence beyond excimer emission: An "on-off" emission response to Cu2

A new julolidine-fluorene based excited state intramolecular proton transfer (ESIPT)/aggregate induced emission (AIE) active Schiff-base (JDF) has been synthesized and evaluated for its photophysical properties in solution and aggregated/solid states. The correlation between the emission behavior and the solid state crystal packing structure revealed the interplay of ESIPT coupled excimer reaction occurring in the solid state, which is one of the rare examples reported so far. For a comprehensive comparison, we synthesized a non-ESIPT methyl derivative (JDF-Me) of JDF capable of showing excimer emission only in the solid state. Further, JDF exhibits normal as well as keto emission in solution, upon addition of water, its poor solvent, that promotes aggregation, the fluorescence emission shows the preponderance of the excimer band in the low energy region. It was also interesting to note that in the solid state (thin films), JDF shows emission beyond the excimer emission, which is wavelength dependent. This is attributed to the formation of diverse clusters leading to the extended delocalization beyond excimers, and represents a clustering-triggered emission ascribing bright red color to the solid JDF. Such mélange of emission characteristics of JDF are responsible for the multicolor emission covering a broad range of electromagnetic spectrum, which is demonstrated by the confocal microscopy images of the JDF recorded in different states. Further, in its aggregated state, JDF recognized Cu²⁺ ions, selectively, manifested in the form of emission quenching via the interaction of Cu²⁺ ions with the oxygen and nitrogen atoms of JDF inhibiting the excimer formation.

Highly selective and discriminative detection of small alcohols based on a dual-emission macrocyclic samarium complex

Lower alcohols (C1-C7) have a close relationship with our lives and some of them are harmful to our body's health. For example, liquor mixed with a tiny amount of methanol is harmful to our health. Much of this study is about identifying one or two low-level alcohols. How to detect low-level alcohol and high-throughput and distinguish between analogues of alcohol remains a tremendous challenge. In this study, a new large ring Schiff base Sm(III) complex (Sm-2r) is synthesized with a double emission matrix using the template method. Its dynamic imine bond (CN) and organic ligands (H₂L2_r) with molecular rotor properties can respond to changes in viscosity and polarity in external environments. The PCA method is used to turn the data matrix into a fingerprint spectrum to distinguish different alcohols (C1-C7). Sm-2r enables the quantization of cyclopropyl and glycerol. Linear ranges of cyclopropanol and glycerol are 0-9.0% and 0-3.0% (v/v), respectively. In addition, Sm-2r has an excellent ability to distinguish the mixtures of n-PrOH and i-PrOH, C₅H₉OH and C₆H₁₁OH, n-PeOH and n-HeOH, 1,3-PDO and 1,2-PDO, MeOH and EtOH, 1,2-EG and 1,2-PDO at different volume ratios. We have provided a way to distinguish alcohol species based on their molecular polarity and viscosity.

A fluorene based probe: Synthesis and "turn-on" water sensitivity of the in-situ formed Cu2+ complex: Application in bio-imaging

A new fluorene based probe (FTH) has been evaluated for its photo-physical properties in solution as well as in the aggregated state/viscous environment. Addition of a poor solvent (water) to the solution of the probe in a good (acetonitrile) solvent significantly enhanced the otherwise weak emission due to aggregation induced emission (AIE). The emission enhancement is also related to the increase in viscosity of the solution, leading to the restricted intramolecular rotation of the peripheral (phenyl) groups. Interestingly, the emission behaviour of the non-emissive in-situ formed Cu²⁺ complex is drastically modulated in the presence of water. The solution of the putative Cu²⁺ complex of the probe turns highly emissive (yellow colour) upon addition of a small fraction of water (up to 7.6 wt %), but the yellow emission diminishes upon increasing higher water fraction. We propose that the initially formed Cu²⁺ complex undergoes hydrolysis in the presence of higher water content releasing the free amine possessing the diaryl amino rotors thus rendering the solution non-emissive. Thus the current probe being reported herein discloses its potential to generate trace water sensitive turn-on Cu²⁺ complex. Additionally, the bio-imaging potential of FTH for live cancer cells and its sensitivity towards intracellular presence of Cu²⁺ ions has been demonstrated.

Xanthene-Based NIR-II Dyes for In Vivo Dynamic Imaging of Blood Circulation

Fluorescence bioimaging through the second near-infrared window (NIR-II, 1000-1700 nm) has attracted much attention due to its deep penetration and high contrast. However, exploring new fluorescent materials, especially small molecular fluorophores with long wavelength and high brightness, is still quite challenging. By expanding π-conjugation and enhancing the intramolecular charge transfer effect, herein we report a series of new xanthene-based NIR-II dyes, named VIXs. Among these dyes, VIX-4 exhibits the best performance with fluorescence emission at 1210 nm and high brightness and has been used for dynamically imaging the blood flow of mice at 200 fps. By virtue of high spatiotemporal resolution of the dynamic imaging, we can distinguish directly the artery and vein through the blood flow direction and measure the blood flow volume by the videos. This study provides not only an effective tool for high spatial and temporal resolution bioimaging but also a new and promising conjugated skeleton for NIR-II dyes.

All-carbocycle hydrocarbon thermosets with high thermal stability and robust mechanical strength for low-k interlayer dielectrics

Two kinds of hydrocarbon precursors were synthesized and cured at elevated temperatures to give cross-linked all-aliphatic/aromatic-ring polymers with a low dielectric constant for next-generation interlayer dielectrics.

Microfluidic Viscometer Using a Suspending Micromembrane for Measurement of Biosamples

The viscosity of biofluids such as blood and saliva can reflect an individual’s health conditions, and viscosity measurements are therefore considered in health monitoring and disease diagnosis. However, conventional viscometers can only handle a larger liquid volume beyond the quantity that can be extracted from a person. Though very effective, micro-sensors based on electrokinetic, ultrasonic, or other principles often have strict requirements for the supporting equipment and complicated procedures and signal processing. Sample contamination is always an important issue. In this paper, we report a microfluidic viscometer requiring a small volume of biosamples (<50 µL) and straightforward operation procedures. It is fabricated with low-cost and biocompatible polymeric materials as one-time-use devices, such that contamination is no longer the concern. It contains a suspending micromembrane located along a microchannel. Under a steady driving pressure, the membrane displacement is a function of viscosity of the liquid sample being tested. We derived a simple analytical relation and perform a simulation for converting the membrane displacement to the sample viscosity. We conducted experiments with liquids (water and mineral oil) with defined properties to verify such a relation. We further applied the micro-viscometer to measure bovine blood samples with different hematocrit levels. It can be concluded that the microfluidic viscometer has a high compatibility with a broad range of biomedical applications.

A fluoran-based viscosity probe with high-performance for lysosome-targeted fluorescence imaging

A new fluorescent probe Lyso-Fl has been facilely prepared by an esterification reaction of spironolactone fluoran dye Rdi with ethanol, which shows viscosity-selective response by fluorescence. The new probe delivers obvious fluorescence signal enhancement when environmental viscosity changes from 1.01 cP (water) to 1256 cP (98% glycerol). And, both the emission intensity (575 nm) and fluorescence lifetime of Lyso-Fl exhibit individually good linear relationships with the solution viscosity. Besides, Lyso-Fl gives a selective response to viscosity among various biological species and exhibits pH-independent (1-10) fluorescent signals towards viscosity. More importantly, Lyso-Fl shows low cytotoxicity and can be utilized for monitoring of dexamethasone-stimulated viscosity enhancement by cell imaging with excellent lysosome-targeted performance, promoting it a promising fluorescent probe for lysosomal viscosity detection.

A highly sensitive red-emitting probe for the detection of viscosity changes in living cells, zebrafish, and human blood samples

Intracellular viscosity can be measured to reflect the state of living cells. Fluorescent probes are powerful tools for viscosity detection in vivo.

Diaminodicyanoquinones: Fluorescent Dyes with High Dipole Moments and Electron-Acceptor Properties

Fluorescent dyes are applied in various fields of research, including solar cells and light-emitting devices, and as reporters for assays and bioimaging studies. Fluorescent dyes with an added high dipole moment pave the way to nonlinear optics and polarity sensitivity. Redox activity makes it possible to switch the molecule's photophysical properties. Diaminodicyanoquinone derivatives possess high dipole moments, yet only low fluorescence quantum yields, and have therefore been neglected as fluorescent dyes. Here we investigate the fluorescence properties of diaminodicyanoquinones using a combined theoretical and experimental approach and derive molecules with a fluorescence quantum yield exceeding 90 %. The diaminodicyanoquinone core moiety provides chemical versatility and can be integrated into novel molecular architectures with unique photophysical features.

QuadraPure-supported palladium nanocatalysts for microwave-promoted Suzuki cross-coupling reaction under aerobic condition

Cross-linked resin-captured palladium (XL-QPPd) was readily prepared by simple physical adsorption onto the high loading QuadraPure macroporous resin and a subsequent reduction process. To enhance the mechanical stability, entrapped palladium nanocatalysts were cross-linked with succinyl chloride. Both transmission electron microscopy images and X-ray diffraction analysis revealed that the palladium nanoparticles were well dispersed with diameters ranging in 4–10 nm. The catalyst performed good catalytic activity in microwave-promoted Suzuki cross-coupling reactions in water under aerobic condition with mild condition by using various aryl halides and phenylboronic acid. In addition, the catalyst showed an excellent recyclability without significant loss of catalytic activity.

Quantitatively mapping cellular viscosity with detailed organelle information via a designed PET fluorescent probe

Viscosity is a fundamental physical parameter that influences diffusion in biological processes. The distribution of intracellular viscosity is highly heterogeneous, and it is challenging to obtain a full map of cellular viscosity with detailed organelle information. In this work, we report 1 as the first fluorescent viscosity probe which is able to quantitatively map cellular viscosity with detailed organelle information based on the PET mechanism. This probe exhibited a significant ratiometric fluorescence intensity enhancement as solvent viscosity increases. The emission intensity increase was attributed to combined effects of the inhibition of PET due to restricted conformational access (favorable for FRET, but not for PET), and the decreased PET efficiency caused by viscosity-dependent twisted intramolecular charge transfer (TICT). A full map of subcellular viscosity was successfully constructed via fluorescent ratiometric detection and fluorescence lifetime imaging; it was found that lysosomal regions in a cell possess the highest viscosity, followed by mitochondrial regions.

Different cytotoxicities and cellular localizations of novel quindoline derivatives with or without boronic acid modifications in cancer cells

The synthesis of a 4 × 4 series of novel quindoline derivatives with or without boronic acid modifications and their cytotoxicities, cellular localizations, and implications on cancer cells are presented and discussed.

Fluorescent molecular rotors based on the BODIPY motif: effect of remote substituents

The fluorescence properties of the target rotor are strongly affected by aryl substituents at the lower rim.

Fluorescein derivatives in intravital fluorescence imaging

Intravital fluorescence microscopy enables the direct imaging of fluorophores in vivo and advanced techniques such as fluorescence lifetime imaging (FLIM) enable the simultaneous detection of multiple fluorophores. Consequently, it is now possible to record distribution and metabolism of a chemical in vivo and to optimise the delivery of fluorophores in vivo. Recent clinical applications with fluorescein and other intravital fluorescent stains have occurred in neurosurgery, dermatology [including photodynamic therapy (PDT)] and endomicroscopy. Potential uses have been identified in periodontal disease, skin graft and cancer surgery. Animal studies have demonstrated that diseased tissue can be specifically stained with fluorophore conjugates. This review focuses on the fluorescein derived fluorophores in common clinical use and provides examples of novel applications from studies in tissue samples.