Evaluation of bioreactor-cultivated bone by magnetic resonance microscopy and FTIR microspectroscopy

An advanced strategy for efficient recycling of bovine bone: Preparing high-valued bone powder via instant catapult steam-explosion

As the major byproduct of meat processing, bovine bone are produced in large amounts annually. However, the inefficient utilization with low-added value resulted in serious resource waste. The study aims to prepare high-value bovine bone power (BBP) via instant catapult steam-explosion (ICSE) treatment, taking ball milling (BM) method as control. Results showed that ICSE treatment deconstructed bovine bone with more holes emerging, and effectively promoted mineral dissolution and protein degradation while reduced energy consumption. Compared with BM-BBP, ICSE-BBP possessed more protein and essential minerals, presenting in regular elliptical shapes with narrow distribution of particle size (0.1 ∼ 40 μm), and owned better solution stability and protein solubility. ICSE-BBP also exhibited higher mineral release and protein digestibility during GI digestion while revealed no obvious cytotoxicity, indicating the potential applicability in nutrition-fortified foods. Taken together, ICSE technology holds promise in reusing bovine bone, providing an efficient and eco-friendly process for BBP industrial production.

PlateFlo - A software-controllable plate-scale perfusion system for culture of adherent cells

Here we present a versatile system for milliliter-scale perfusion culture of adherent cells that can be built using basic tools, based on a readily available one-well culture plate (84 cm² culture area). Media composition and flow paths can be programmatically controlled via USB serial interface using the FETbox hardware controller and associated PlateFlo Python package. The FETbox can control up to five high current 12 V devices such as common pinch valves, solenoids, and DC motor peristaltic pumps. It was designed to be easily customized with built-in accommodation for additional electronic components (e.g. analog sensors and input), use of the ubiquitous Arduino Nano platform, and easily expanded serial communication protocol. Multiple FETboxes can be used in parallel for additional devices. Applications of the PlateFlo system include perfusion culture of laboratory experiments requiring large cell numbers including genome-scale genetic screens and proteomics, as well as novel perfusion schemes including dynamic media conditions and sequential cell culture.

Improved method for MR microscopy of brain tissue cultured with the interface method combined with Lenz lenses

MR in microscopy can non-invasively image the morphology of living tissue, which is of particular interest in studying the mammalian brain. Many studies use live animals for basic research on brain functions, disease pathogenesis, and drug development. However, in vitro systems are on the rise, due to advantages such as the absence of a blood-brain barrier, predictable pharmacokinetics, and reduced ethical restrictions. Hence, they present an inexpensive and adequate technique to answer scientific questions and to perform drug screenings. Some publications report the use of acute brain slices for MR microscopy studies, but these only permit single measurements over several hours. Repetitive MR measurements in longitudinal studies demand an MR-compatible setup which allows cultivation for several days or weeks, and hence properly functioning in vitro systems. Organotypic hippocampal slice cultures (OHSC) are a well-established and robust in vitro system which still exhibits most histological hallmarks of the hippocampal network in vivo. An MR compatible incubation platform is introduced in which OHSC are cultivated according to the interface method following Stoppini et al. In this cultivation method a tissue slice is placed onto a membrane with nutrition medium underneath and a gas atmosphere above, where the air-tissue interface perpendicular to the B₀ field induces strong artefacts. We introduce a handling protocol that suppresses these artefacts and increases signal quality significantly to acquire high resolution images of tissue slices. An additional challenge is the lack of available of MR microscopy equipment suitable for small animal scanners. A Lenz lens with an attached capacitor can dramatically increase the SNR in these cases, and wirelessly bring the detection system in close proximity to the sample without compromising the OHSC system through the introduction of wired detectors. The resultant signal gain is demonstrated by imaging a PFA-fixed brain slice with a 72 mm diameter volume coil without a Lenz lens, and with a broadband and a self-resonant Lenz lens. In our setting, the self-resonant Lenz lens increases the SNR 10-fold over using the volume coil only.

An antibody based approach for multi-coloring osteogenic and chondrogenic proteins in tissue engineered constructs

When tissue engineering strategies rely on the combination of three-dimensional (3D) polymeric or ceramic scaffolds with cells to culture implantable tissue constructs in vitro, it is desirable to monitor tissue growth and cell fate to be able to more rationally predict the quality and success of the construct upon implantation. Such a 3D construct is often referred to as a 'black-box' since the properties of the scaffolds material limit the applicability of most imaging modalities to assess important construct parameters. These parameters include the number of cells, the amount and type of tissue formed and the distribution of cells and tissue throughout the construct. Immunolabeling enables the spatial and temporal identification of multiple tissue types within one scaffold without the need to sacrifice the construct. In this report, we concisely review the applicability of antibodies (Abs) and their conjugation chemistries in tissue engineered constructs. With some preliminary experiments, we show an efficient conjugation strategy to couple extracellular matrix Abs to fluorophores. The conjugated probes proved to be effective in determining the presence of collagen type I and type II on electrospun and additive manufactured 3D scaffolds seeded with adult human bone marrow derived mesenchymal stromal cells. The conjugation chemistry applied in our proof of concept study is expected to be applicable in the coupling of any other fluorophore or particle to the Abs. This could ultimately lead to a library of probes to permit high-contrast imaging by several imaging modalities.

The Bone Black Pigment Identification by Noninvasive, In Situ Infrared Reflection Spectroscopy

Two real case studies, an oil painting on woven paper and a cycle of mural paintings, have been presented to validate the use of infrared reflection spectroscopy as suitable technique for the identification of bone black pigment. By the use of the sharp weak band at 2013 cm^-1, it has been possible to distinguish animal carbon-based blacks by a noninvasive method. Finally, an attempt for an eventual assignment for the widely used sharp band at 2013 cm^-1 is discussed.

Review: bioreactor design towards generation of relevant engineered tissues: focus on clinical translation

In tissue engineering and regenerative medicine, studies that utilize 3D scaffolds for generating voluminous tissues are mostly confined in the realm of in vitro research and preclinical animal model testing. Bioreactors offer an excellent platform to grow and develop 3D tissues by providing conditions that mimic their native microenvironment. Aligning the bioreactor development process with a focus on patient care will aid in the faster translation of the bioreactor technology to clinics. In this review, we discuss the various factors involved in the design of clinically relevant bioreactors in relation to their respective applications. We explore the functional relevance of tissue grafts generated by bioreactors that have been designed to provide physiologically relevant mechanical cues on the growing tissue. The review discusses the recent trends in non-invasive sensing of the bioreactor culture conditions. It provides an insight to the current technological advancements that enable in situ, non-invasive, qualitative and quantitative evaluation of the tissue grafts grown in a bioreactor system. We summarize the emerging trends in commercial bioreactor design followed by a short discussion on the aspects that hamper the 'push' of bioreactor systems into the commercial market as well as 'pull' factors for stakeholders to embrace and adopt widespread utility of bioreactors in the clinical setting. Copyright © 2017 John Wiley & Sons, Ltd.

Strategies for improving the physiological relevance of human engineered tissues

This review examines important robust methods for sustained, steady-state, in vitro culture. To achieve 'physiologically relevant' tissues in vitro additional complexity must be introduced to provide suitable transport, cell signaling, and matrix support for cells in 3D environments to achieve stable readouts of tissue function. Most tissue engineering systems draw conclusions on tissue functions such as responses to toxins, nutrition, or drugs based on short-term outcomes with in vitro cultures (2-14 days). However, short-term cultures limit insight with physiological relevance because the cells and tissues have not reached a steady-state.

Design and Fabrication of an MRI-Compatible, Autonomous Incubation System

Tissue engineers have long sought access to an autonomous, imaging-compatible tissue incubation system that, with minimum operator handling, can provide real-time visualization and quantification of cells, tissue constructs, and organs. This type of screening system, capable of operating noninvasively to validate tissue, can overcome current limitations like temperature shock, unsustainable cellular environments, sample contamination, and handling/stress. However, this type of system has been a major challenge, until now. Here, we describe the design, fabrication, and characterization of an innovative, autonomous incubation system that is compatible with a 9.4 T magnetic resonance imaging (MRI) scanner. Termed the e-incubator (patent pending; application number: 13/953,984), this microcontroller-based system is integrated into an MRI scanner and noninvasively screens cells and tissue cultures in an environment where temperature, pH, and media/gas handling are regulated. The 4-week study discussed herein details the continuous operation of the e-incubator for a tissue-engineered osteogenic construct, validated by LIVE/DEAD(®) cell assays and histology. The evolving MR quantitative parameters of the osteogenic construct were used as biomarkers for bone tissue engineering and to further validate the quality of the product noninvasively before harvesting. Importantly, the e-incubator reliably facilitates culturing cells and tissue constructs to create engineered tissues and/or investigate disease therapies.

Extracellular matrix mineralization in murine MC3T3-E1 osteoblast cultures: an ultrastructural, compositional and comparative analysis with mouse bone

Bone cell culture systems are essential tools for the study of the molecular mechanisms regulating extracellular matrix mineralization. MC3T3-E1 osteoblast cell cultures are the most commonly used in vitro model of bone matrix mineralization. Despite the widespread use of this cell line to study biomineralization, there is as yet no systematic characterization of the mineral phase produced in these cultures. Here we provide a comprehensive, multi-technique biophysical characterization of this cell culture mineral and extracellular matrix, and compare it to mouse bone and synthetic apatite mineral standards, to determine the suitability of MC3T3-E1 cultures for biomineralization studies. Elemental compositional analysis by energy-dispersive X-ray spectroscopy (EDS) showed calcium and phosphorus, and trace amounts of sodium and magnesium, in both biological samples. X-ray diffraction (XRD) on resin-embedded intact cultures demonstrated that similar to 1-month-old mouse bone, apatite crystals grew with preferential orientations along the (100), (101) and (111) mineral planes indicative of guided biogenic growth as opposed to dystrophic calcification. XRD of crystals isolated from the cultures revealed that the mineral phase was poorly crystalline hydroxyapatite with 10 to 20nm-sized nanocrystallites. Consistent with the XRD observations, electron diffraction patterns indicated that culture mineral had low crystallinity typical of biological apatites. Fourier-transform infrared spectroscopy (FTIR) confirmed apatitic carbonate and phosphate within the biological samples. With all techniques utilized, cell culture mineral and mouse bone mineral were remarkably similar. Scanning (SEM) and transmission (TEM) electron microscopy showed that the cultures had a dense fibrillar collagen matrix with small, 100nm-sized, collagen fibril-associated mineralization foci which coalesced to form larger mineral aggregates, and where mineralized sites showed the accumulation of the mineral-binding protein osteopontin. Light microscopy, confocal microscopy and three-dimensional reconstructions showed that some cells had dendritic processes and became embedded within the mineral in an osteocyte-like manner. In conclusion, we have documented characteristics of the mineral and matrix phases of MC3T3-E1 osteoblast cultures, and have determined that the structural and compositional properties of the mineral are highly similar to that of mouse bone.

The e-incubator: a magnetic resonance imaging-compatible mini incubator

The tissue engineering community has been vocal regarding the need for noninvasive instruments to assess the development of tissue-engineered constructs. Medical imaging has helped fulfill this role. However, specimens allocated to a test tube for imaging cannot be tested for a prolonged period or returned to the incubator. Therefore, samples are essentially wasted due to potential contamination and transfer in a less than optimal growth environment. In turn, we present a standalone, miniature, magnetic resonance imaging-compatible incubator, termed the e-incubator. This incubator uses a microcontroller unit to automatically sense and regulate physiological conditions for tissue culture, thus allowing for concurrent tissue culture and evaluation. The e-incubator also offers an innovative scheme to study underlying mechanisms related to the structural and functional evolution of tissues. Importantly, it offers a key step toward enabling real-time testing of engineered tissues before human transplantation. For validation purposes, we cultured tissue-engineered bone constructs for 4 weeks to test the e-incubator. Importantly, this technology allows for visualizing the evolution of temporal and spatial morphogenesis. In turn, the e-incubator can filter deficient constructs, thereby increasing the success rate of implantation of tissue-engineered constructs, especially as construct design grows in levels of complexity to match the geometry and function of patients' unique needs.

Benign odontogenic tumors versus histochemically related tissues: preliminary results from mid-infrared and solid-state nuclear magnetic resonance spectroscopy

Three types of human odontogenic tumors histologically classified as compound composite odontoma, ossifying fibroma, and Pindborg tumor were characterized using mid-infrared spectroscopy (mid-IR) and solid-state nuclear magnetic resonance (ssNMR). For comparison, human jawbone and dental mineralized tissues such as dentin, enamel, and dental cement were also characterized. The studies focused on the structural properties and chemical composition of pathological tissues versus histochemically related tissues. All analyzed tumors were composed of organic and mineral parts and water. Apatite was found to be the main constituent of the mineral part. Various components (water, structural hydroxyl groups, carbonate ions (CO(3)(2-)), and hydrogen phosphate ions (HPO(4)(2-))) and physicochemical parameters (index of apatite maturity and crystallinity) were examined. The highest organic/mineral ratio was observed in fibrocementoma, a finding that can be explained by the fibrous character of the tumor. The lowest relative HPO(4)(2-) content was found in odontoma. This tumor is characterized by the highest mineral crystallinity index and content of structural hydroxyl groups. The Pindborg tumor mineral portion was found to be poorly crystalline and rich in HPO(4)(2-). The relative CO(3)(2-) content was similar in all samples studied. The results of spectroscopic studies of odontogenic tumors were consistent with the standard histochemical analysis. It was shown that the various techniques of ssNMR and elaborate analysis of the mid-IR spectra, applied together, provide valuable information about calcified benign odontogenic tumors.

Imaging challenges in biomaterials and tissue engineering

Biomaterials are employed in the fields of tissue engineering and regenerative medicine (TERM) in order to enhance the regeneration or replacement of tissue function and/or structure. The unique environments resulting from the presence of biomaterials, cells, and tissues result in distinct challenges in regards to monitoring and assessing the results of these interventions. Imaging technologies for three-dimensional (3D) analysis have been identified as a strategic priority in TERM research. Traditionally, histological and immunohistochemical techniques have been used to evaluate engineered tissues. However, these methods do not allow for an accurate volume assessment, are invasive, and do not provide information on functional status. Imaging techniques are needed that enable non-destructive, longitudinal, quantitative, and three-dimensional analysis of TERM strategies. This review focuses on evaluating the application of available imaging modalities for assessment of biomaterials and tissue in TERM applications. Included is a discussion of limitations of these techniques and identification of areas for further development.

Fourier transform infrared imaging as a tool to chemically and spatially characterize matrix-mineral deposition in osteoblasts

Mineralizing osteoblasts are regularly used to study osteogenesis and model in vivo bone formation. Thus, it is important to verify that the mineral and matrix being formed in situ are comparable to those found in vivo. However, it has been shown that histochemical techniques alone are not sufficient for identifying calcium phosphate-containing mineral. The goal of the present study was to demonstrate the use of Fourier transform infrared imaging (FTIRI) as a tool for characterizing the spatial distribution and colocalization of the collagen matrix and the mineral phase during the mineralization process of osteoblasts in situ. MC3T3-E1 mouse osteoblasts were mineralized in culture for 28 days and FTIRI was used to evaluate the collagen content, collagen cross-linking, mineralization level and speciation, and mineral crystallinity in a spatially resolved fashion as a function of time. To test whether FTIRI could detect subtle changes in the mineralization process, cells were treated with risedronate (RIS). Results showed that collagen deposition and mineralization progressed over time and that the apatite mineral was associated with a collagenous matrix rather than ectopic mineral. The process was temporarily slowed by RIS, where the inhibition of osteoblast function caused slowed collagen production and cross-linking, leading to decreased mineralization. This study demonstrates that FTIRI is a complementary tool to histochemistry for spatially correlating the collagen matrix distribution and the nature of the resultant mineral during the process of osteoblast mineralization. It can further be used to detect small perturbations in the osteoid and mineral deposition process.

Computational modeling of adherent cell growth in a hollow-fiber membrane bioreactor for large-scale 3-D bone tissue engineering

The use of hollow-fiber membrane bioreactors (HFMBs) has been proposed for three-dimensional bone tissue growth at the clinical scale. However, to achieve an efficient HFMB design, the relationship between cell growth and environmental conditions must be determined. Therefore, in this work, a dynamic double-porous media model was developed to determine nutrient-dependent cell growth for bone tissue formation in a HFMB. The whole hollow-fiber scaffold within the bioreactor was treated as a porous domain in this model. The domain consisted of two interpenetrating porous regions, including a porous lumen region available for fluid flow and a porous extracapillary space filled with a collagen gel that contained adherent cells for promoting long-term growth into tissue-like mass. The governing equations were solved numerically and the model was validated using previously published experimental results. The contributions of several bioreactor design and process parameters to the performance of the bioreactor were studied. The results demonstrated that the process and design parameters of the HFMB significantly affect nutrient transport and thus cell behavior over a long period of culture. The approach presented here can be applied to any cell type and used to develop tissue engineering hollow-fiber scaffolds.

Label-free magnetic resonance imaging to locate live cells in three-dimensional porous scaffolds

Porous scaffolds are widely tested materials used for various purposes in tissue engineering. A critical feature of a porous scaffold is its ability to allow cell migration and growth on its inner surface. Up to now, there has not been a method to locate live cells deep inside a material, or in an entire structure, using real-time imaging and a non-destructive technique. Herein, we seek to demonstrate the feasibility of the magnetic resonance imaging (MRI) technique as a method to detect and locate in vitro non-labelled live cells in an entire porous material. Our results show that the use of optimized MRI parameters (4.7 T; repetition time = 3000 ms; echo time = 20 ms; resolution 39 × 39 µm) makes it possible to obtain images of the scaffold structure and to locate live non-labelled cells in the entire material, with a signal intensity higher than that obtained in the culture medium. In the current study, cells are visualized and located in different kinds of porous scaffolds. Moreover, further development of this MRI method might be useful in several three-dimensional biomaterial tests such as cell distribution studies, routine qualitative testing methods and in situ monitoring of cells inside scaffolds.

Novel mineral contrast agent for magnetic resonance studies of bone implants grown on a chick chorioallantoic membrane

Magnetic resonance imaging (MRI) studies of tissue engineered constructs prior to implantation clearly demonstrate the utility of the MRI technique for studying the bone formation process. To test the utility of our MRI protocols for explant studies, we present a novel test platform in which osteoblast-seeded scaffolds were implanted on the chorioallantoic membrane of a chick embryo. Scaffolds from the following experimental groups were examined by high-resolution MRI: (a) cell-seeded implanted scaffolds (CIM), (b) unseeded implanted scaffolds (UCIM), (c) cell-seeded scaffolds in static culture (CIV) and (d) unseeded scaffolds in static culture (UCIV). The reduction in water proton transverse relaxation times and the concomitant increase in water proton magnetization transfer ratios for CIM and CIV scaffolds, compared to UCIV scaffolds, were consistent with the formation of a bone-like tissue within the polymer scaffold, which was confirmed by immunohistochemistry and fluorescence microscopy. However, the presence of angiogenic vessels and fibrotic adhesions around UCIM scaffolds can confound MRI findings of bone deposition. Consequently, to improve the specificity of the MRI technique for detecting mineralized deposits within explanted tissue engineered bone constructs, we introduce a novel contrast agent that uses alendronate to target a Food and Drug Administration-approved MRI contrast agent (Gd-DOTA) to bone mineral. Our contrast agent termed GdALN was used to uniquely identify mineralized deposits in representative samples from our four experimental groups. After GdALN treatment, both CIM and CIV scaffolds, containing mineralized deposits, showed marked signal enhancement on longitudinal relaxation time-weighted (T1W) images compared to UCIV scaffolds. Relative to UCIV scaffolds, some enhancement was observed in T1W images of GdALN-treated UCIM scaffolds, subjacent to the dark adhesions at the scaffold surface, possibly from dystrophic mineral formed in the fibrotic adhesions. Notably, residual dark areas on T1W images of CIM and UCIM scaffolds were attributable to blood inside infiltrating vessels. In summary, we present the efficacy of GdALN for sensitizing the MRI technique to the deposition of mineralized deposits in explanted polymeric scaffolds.

Characterization of engineered tissue construct mechanical function by magnetic resonance imaging

Non-invasive magnetic resonance imaging (MRI) is a technology that enables the characterization of multiple physical phenomena in living and engineered tissues. The mechanical function of engineered tissues is a primary endpoint for the successful regeneration of many biological tissues, such as articular cartilage, spine and heart. Here we demonstrate the application of MRI to characterize the mechanical function of engineered tissue. Phase contrast-based methods were demonstrated to characterize detailed deformation fields throughout the interior of native and engineered tissue, using an articular cartilage defect model as a study system. MRI techniques revealed that strain fields varied non-uniformly, depending on spatial position. Strains were highest in the tissue constructs compared to surrounding native cartilage. Tissue surface geometry corresponded to strain fields observed within the tissue interior near the surface. Strain fields were further evaluated with respect to the spatial variation in the concentration of glycosaminoglycans ([GAG]), critical proteoglycans in the extracellular matrix of cartilage, as determined by gadolinium-enhanced imaging. [GAG] also varied non-uniformly, depending on spatial position and was lowest in the tissue constructs compared to the surrounding cartilage. The use of multiple MRI techniques to assess tissue mechanical function provides complementary data and suggests that deformation is related to tissue geometry, underlying extracellular matrix constituents and the lack of tissue integration in the model system studied. Specialized and advanced MRI phase contrast-based methods are valuable for the detailed characterization and evaluation of mechanical function of tissue-engineered constructs.

Absence of bone sialoprotein (BSP) impairs cortical defect repair in mouse long bone

Matrix proteins of the SIBLING family interact with bone cells and with bone mineral and are thus in a key position to regulate bone development, remodeling and repair. Within this family, bone sialoprotein (BSP) is highly expressed by osteoblasts, hypertrophic chondrocytes and osteoclasts. We recently reported that mice lacking BSP (BSP-/-) have very low trabecular bone turnover. In the present study, we set up an experimental model of bone repair by drilling a 1 mm diameter hole in the cortical bone of femurs in both BSP-/- and +/+ mice. A non-invasive MRI imaging and bone quantification procedure was designed to follow bone regeneration, and these data were extended by microCT imaging and histomorphometry on undecalcified sections for analysis at cellular level. These combined approaches revealed that the repair process as reflected in defect-refilling in the cortical area was significantly delayed in BSP-/- mice compared to +/+ mice. Concomitantly, histomorphometry showed that formation, mineralization and remodeling of repair (primary) bone in the medulla were delayed in BSP-/- mice, with lower osteoid and osteoclast surfaces at day 15. In conclusion, the absence of BSP delays bone repair at least in part by impairing both new bone formation and osteoclast activity.

Monitoring tissue engineering using magnetic resonance imaging

Assessment of tissue regeneration is essential to optimize the stages of tissue engineering (cell proliferation, tissue development and implantation). Optical and X-ray imaging have been used in tissue engineering to provide useful information, but each has limitations: for example, poor depth penetration and radiation damage. Magnetic resonance imaging (MRI) largely overcomes these restrictions, exhibits high resolution (approximately 100 microm) and can be applied both in vitro and in vivo. Recently, MRI has been used in tissue engineering to generate spatial maps of tissue relaxation times (T(1), T(2)), water diffusion coefficients, and the stiffness (shear moduli) of developing engineered tissues. In addition, through the use of paramagnetic and superparamagnetic contrast agents, MRI can quantify cell death, assess inflammation, and visualize cell trafficking and gene expression. After tissue implantation MRI can be used to observe the integration of a tissue implant with the surrounding tissues, and to check for early signs of immune rejection. In this review, we describe and evaluate the growing role of MRI in the assessment of tissue engineered constructs. First, we briefly describe the underlying principles of MRI and the expected changes in relaxation times (T(1), T(2)) and the water diffusion coefficient that are the basis for MR contrast in developing tissues. Next, we describe how MRI can be applied to evaluate the tissue engineering of mesenchymal tissues (bone, cartilage, and fat). Finally, we outline how MRI can be used to monitor tissue structure, composition, and function to improve the entire tissue engineering process.

Analyses of cell growth in tissue-engineering scaffolds

Cell growth is critical to the regeneration of most tissues. Current methods for analyzing cell growth in scaffolds used for tissue engineering are reviewed in the context of their limitations. A mathematical model for analyzing cell growth in scaffolds is presented to highlight the key parameters that govern cell growth. To overcome the diffusion barrier that limits the formation of thicker tissues, strategies to promote better nutrient delivery are discussed.