32 wk old C3H/HeJ mice actively respond to mechanical loading

Increased deformations are dispensable for cell mechanoresponse in engineered bone analogs mimicking aging bone marrow

Aged individuals and astronauts experience bone loss despite rigorous physical activity. Bone mechanoresponse is in-part regulated by mesenchymal stem cells (MSCs) that respond to mechanical stimuli. Direct delivery of low intensity vibration (LIV) recovers MSC proliferation in senescence and simulated microgravity models, indicating that age-related reductions in mechanical signal delivery within bone marrow may contribute to declining bone mechanoresponse. To answer this question, we developed a 3D bone marrow analog that controls trabecular geometry, marrow mechanics and external stimuli. Validated finite element (FE) models were developed to quantify strain environment within hydrogels during LIV. Bone marrow analogs with gyroid-based trabeculae of bone volume fractions (BV/TV) corresponding to adult (25%) and aged (13%) mice were printed using polylactic acid (PLA). MSCs encapsulated in migration-permissive hydrogels within printed trabeculae showed robust cell populations on both PLA surface and hydrogel within a week. Following 14 days of LIV treatment (1g, 100 Hz, 1 hour/day), type-I collagen and F-actin were quantified for the cells in the hydrogel fraction. While LIV increased all measured outcomes, FE models predicted higher von Mises strains for the 13% BV/TV groups (0.2%) when compared to the 25% BV/TV group (0.1%). Despite increased strains, collagen-I and F-actin measures remained lower in the 13% BV/TV groups when compared to 25% BV/TV counterparts, indicating that cell response to LIV does not depend on hydrogel strains and that bone volume fraction (i.e. available bone surface) directly affects cell behavior in the hydrogel phase independent of the external stimuli. Overall, bone marrow analogs offer a robust and repeatable platform to study bone mechanobiology.

Bone strength and composition in spacefaring rodents: systematic review and meta-analysis

Studying the effects of space travel on bone of experimental animals provides unique advantages, including the ability to perform post-mortem analysis and mechanical testing. To synthesize the available data to assess how much and how consistently bone strength and composition parameters are affected by spaceflight, we systematically identified studies reporting bone health in spacefaring animals from Medline, Embase, Web of Science, BIOSIS, and NASA Technical reports. Previously, we reported the effect of spaceflight on bone architecture and turnover in rodents and primates. For this study, we selected 28 articles reporting bone strength and composition in 60 rats and 60 mice from 17 space missions ranging from 7 to 33 days in duration. Whole bone mechanical indices were significantly decreased in spaceflight rodents, with the percent difference between spaceflight and ground control animals for maximum load of −15.24% [Confidence interval: −22.32, −8.17]. Bone mineral density and calcium content were significantly decreased in spaceflight rodents by −3.13% [−4.96, −1.29] and −1.75% [−2.97, −0.52] respectively. Thus, large deficits in bone architecture (6% loss in cortical area identified in a previous study) as well as changes in bone mass and tissue composition likely lead to bone strength reduction in spaceflight animals.

At the nuclear envelope of bone mechanobiology

The nuclear envelope and nucleoskeleton are emerging as signaling centers that regulate how physical information from the extracellular matrix is biochemically transduced into the nucleus, affecting chromatin and controlling cell function. Bone is a mechanically driven tissue that relies on physical information to maintain its physiological function and structure. Disorder that present with musculoskeletal and cardiac symptoms, such as Emery-Dreifuss muscular dystrophies and progeria, correlate with mutations in nuclear envelope proteins including Linker of Nucleoskeleton and Cytoskeleton (LINC) complex, Lamin A/C, and emerin. However, the role of nuclear envelope mechanobiology on bone function remains underexplored. The mesenchymal stem cell (MSC) model is perhaps the most studied relationship between bone regulation and nuclear envelope function. MSCs maintain the musculoskeletal system by differentiating into multiple cell types including osteocytes and adipocytes, thus supporting the bone's ability to respond to mechanical challenge. In this review, we will focus on how MSC function is regulated by mechanical challenges both in vitro and in vivo within the context of bone function specifically focusing on integrin, β-catenin and YAP/TAZ signaling. The importance of the nuclear envelope will be explored within the context of musculoskeletal diseases related to nuclear envelope protein mutations and nuclear envelope regulation of signaling pathways relevant to bone mechanobiology in vitro and in vivo.

Morphology of Mouse Anterior Cruciate Ligament-Complex Changes Following Exercise During Pubertal Growth

Postnatal development and the physiological loading response of the anterior cruciate ligament (ACL) complex (ACL proper, entheses, and bony morphology) is not well understood. We tested whether the ACL-complex of two inbred mouse strains that collectively encompass the musculoskeletal variation observed in humans would demonstrate significant morphological differences following voluntary cage-wheel running during puberty compared with normal cage activity controls. Female A/J and C57BL/6J (B6) 6-week-old mice were provided unrestricted access to a standard cage-wheel for 4 weeks. A/J-exercise mice showed a 6.3% narrower ACL (p = 0.64), and a 20.1% more stenotic femoral notch (p < 0.01) while B6-exercise mice showed a 12.3% wider ACL (p = 0.10), compared with their respective controls. Additionally, A/J-exercise mice showed a 5.3% less steep posterior medial tibial slope (p = 0.07) and an 8.8% less steep posterior lateral tibial slope (p = 0.07), while B6-exercise mice showed a 9.8% more steep posterior medial tibial slope (p < 0.01) than their respective controls. A/J-exercise mice also showed more reinforcement of the ACL tibial enthesis with a 20.4% larger area (p < 0.01) of calcified fibrocartilage distributed at a 29.2% greater depth (p = 0.02) within the tibial enthesis, compared with their controls. These outcomes suggest exercise during puberty significantly influences ACL-complex morphology and that inherent morphological differences between these mice, as observed in their less active genetically similar control groups, resulted in a divergent phenotypic outcome between mouse strains. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1910-1919, 2019.

Combating osteoporosis and obesity with exercise: leveraging cell mechanosensitivity

Osteoporosis, a condition of skeletal decline that undermines quality of life, is treated with pharmacological interventions that are associated with poor adherence and adverse effects. Complicating efforts to improve clinical outcomes, the incidence of obesity is increasing, predisposing the population to a range of musculoskeletal complications and metabolic disorders. Pharmacological management of obesity has yet to deliver notable reductions in weight and debilitating complications are rarely avoided. By contrast, exercise shows promise as a non-invasive and non-pharmacological method of regulating both osteoporosis and obesity. The principal components of exercise - mechanical signals - promote bone and muscle anabolism while limiting formation and expansion of fat mass. Mechanical regulation of bone and marrow fat might be achieved by regulating functions of differentiated cells in the skeletal tissue while biasing lineage selection of their common progenitors - mesenchymal stem cells. An inverse relationship between adipocyte versus osteoblast fate selection from stem cells is implicated in clinical conditions such as childhood obesity and increased marrow adiposity in type 2 diabetes mellitus, as well as contributing to skeletal frailty. Understanding how exercise-induced mechanical signals can be used to improve bone quality while decreasing fat mass and metabolic dysfunction should lead to new strategies to treat chronic diseases such as osteoporosis and obesity.

Differential Adaptive Response of Growing Bones From Two Female Inbred Mouse Strains to Voluntary Cage-Wheel Running

The phenotypic response of bones differing in morphological, compositional, and mechanical traits to an increase in loading during growth is not well understood. We tested whether bones of two inbred mouse strains that assemble differing sets of traits to achieve mechanical homeostasis at adulthood would show divergent responses to voluntary cage‐wheel running. Female A/J and C57BL6/J (B6) 4‐week‐old mice were provided unrestricted access to a standard cage‐wheel for 4 weeks. A/J mice have narrow and highly mineralized femora and B6 mice have wide and less mineralized femora. Both strains averaged 2 to 9.5 km of running per day, with the average‐distance run between strains not significantly different (p = 0.133). Exercised A/J femora showed an anabolic response to exercise with the diaphyses showing a 2.8% greater total area (Tt.Ar, p = 0.06) and 4.7% greater cortical area (Ct.Ar, p = 0.012) compared to controls. In contrast, exercised B6 femora showed a 6.2% (p < 0.001) decrease in Tt.Ar (p < 0.001) and a 6.7% decrease in Ct.Ar (p = 0.133) compared to controls, with the femora showing significant marrow infilling (p = 0.002). These divergent morphological responses to exercise, which did not depend on the daily distance run, translated to a 7.9% (p = 0.001) higher maximum load (ML) for exercised A/J femora but no change in ML for exercised B6 femora compared to controls. A consistent response was observed for the humeri but not the vertebral bodies. This differential outcome to exercise has not been previously observed in isolated loading or forced treadmill running regimes. Our findings suggest there are critical factors involved in the metabolic response to exercise during growth that require further consideration to understand how genotype, exercise, bone morphology, and whole‐bone strength interact during growth. © 2018 The Authors. JBMR Plus is published by Wiley Periodicals, Inc. on behalf of the American Society for Bone and Mineral Research.

Differences in bone structure and unloading-induced bone loss between C57BL/6N and C57BL/6J mice

The C57BL/6 mouse, the most frequently utilized animal model in biomedical research, is in use as several substrains, all of which differ by a small array of genomic differences. Two of these substrains, C57BL/6J (B6J) and C57BL/6N (B6N), are commonly used but it is unclear how phenotypically similar or different they are. Here, we tested whether adolescent B6N mice have a bone phenotype and respond to the loss of weightbearing differently than B6J. At 9 weeks of age, normally ambulating B6N had lower trabecular bone volume fraction but greater bone formation rates and osteoblast surfaces than corresponding B6J. At 11 weeks of age, differences in trabecular indices persisted between the substrains but differences in cellular activity had ceased. Cortical bone indices were largely similar between the two substrains. Hindlimb unloading (HLU) induced similar degeneration of trabecular architecture and cellular activity in both substrains when comparing 11-week-old HLU mice to 11-week-old controls. However, unloaded B6N mice had smaller cortices than B6J. When comparing HLU to 9 weeks baseline control mice, deterioration in trabecular separation, osteoblast indices, and endocortical variables was significantly greater in B6N than B6J. These data indicate specific developmental differences in bone formation and morphology between B6N and B6J mice, giving rise to a differential response to mechanical unloading that may be modulated, in part, by the genes Herc2, Myo18b, and Acan. Our results emphasize that these substrains cannot be used interchangeably at least for investigations in which the phenotypic makeup and its response to extraneous stimuli are of interest.

Fluoride affects bone repair differently in mice models with distinct bone densities

We grouped mice [strains: C57BL/6J (n=32) and C3H/HeJ (n=32)] to address the influence of bone density on fluoride's (F's) biological effects. These animals received low-fluoride food and water containing 0 (control group) or 50ppm of F for up to 28days. The upper left central incisor was extracted, and the left maxilla was collected at 7, 14, 21, and 28days for histological and histomorphometric analysis to estimate bone neoformation. Our results showed bone neoformation in all of the evaluated groups, with the presence of bone islets invading the center of the alveoli when replacing the existing connective tissue. Curiously, this biological phenomenon was more evident in the C57BL/6J strain. The histomorphometric analysis confirmed the histological findings in relation to the amount of new bone tissue and showed a decrease in C3H/HeJ mice (control group). Altogether, our results showed differential effects of fluoride bone metabolism, confirming a genetic component in susceptibility to the effects of fluoride.

Trabecular and Cortical Bone of Growing C3H Mice Is Highly Responsive to the Removal of Weightbearing

Genetic make-up strongly influences the skeleton’s susceptibility to the loss of weight bearing with some inbred mouse strains experiencing great amounts of bone loss while others lose bone at much smaller rates. At young adulthood, female inbred C3H/HeJ (C3H) mice are largely resistant to catabolic pressure induced by unloading. Here, we tested whether the depressed responsivity to unloading is inherent to the C3H genetic make-up or whether a younger age facilitates a robust skeletal response to unloading. Nine-week-old, skeletally immature, female C3H mice were subjected to 3wk of hindlimb unloading (HLU, n = 12) or served as normal baseline controls (BC, n = 10) or age-matched controls (AC, n = 12). In all mice, cortical and trabecular architecture of the femur, as well as levels of bone formation and resorption, were assessed with μCT, histomorphometry, and histology. Changes in bone marrow progenitor cell populations were determined with flow cytometry. Following 21d of unloading, HLU mice had 52% less trabecular bone in the distal femur than normal age-matched controls. Reflecting a loss of trabecular tissue compared to baseline controls, trabecular bone formation rates (BFR/BS) in HLU mice were 40% lower than in age-matched controls. Surfaces undergoing osteoclastic resorption were not significantly different between groups. In the mid-diaphysis, HLU inhibited cortical bone growth leading to 14% less bone area compared to age-matched controls. Compared to AC, BFR/BS of HLU mice were 53% lower at the endo-cortical surface and 49% lower at the periosteal surface of the mid-diaphysis. The enriched osteoprogenitor cell population (OPC) comprised 2% of the bone marrow stem cells in HLU mice, significantly different from 3% OPC in the AC group. These data show that bone tissue in actively growing C3H mice is lost rapidly, or fails to grow, during the removal of functional weight bearing—in contrast to the insignificant response previously demonstrated in female young adult C3H mice. Thus, the attributed low sensitivity of the C3H mouse strain to the loss of mechanical signals is not apparent at a young age and this trait therefore does not reflect a genetic regulation throughout the life span of this strain. These results highlight the significance of age in modulating the contribution of genetics in orchestrating bone’s response to unloading and that the skeletal unresponsiveness of young adult C3H mice to the loss of weight bearing is not genetically hard-wired.

From mechanical stimulus to bone formation: A review

Bone is a remarkable tissue that can respond to external stimuli. The importance of mechanical forces on the mass and structural development of bone has long been accepted. This adaptation behaviour is very complex and involves multidisciplinary concepts, and significant progress has recently been made in understanding this process. In this review, we describe the state of the art studies in this area and highlight current insights while simultaneously clarifying some basic yet essential topics related to the origin of mechanical stimulus in bone, the biomechanisms associated with mechanotransduction, the nature of physiological bone stimuli and the test systems most commonly used to study the mechanical stimulation of bone.

Experimental and finite element analysis of dynamic loading of the mouse forearm

Bone formation is reported to initiate in osteocytes by mechanotransduction due to dynamic loading of bone. The first step towards this is to characterize the dynamic strain fields in the overall bone. Here, the previously developed mouse forearm ulna-radius model, subjected to static loading, has been further enhanced by incorporating a loading cap and applying a cyclic dynamic load to more closely approximate experimental biological conditions. This study also incorporates data obtained from strain gauging both the ulna and radius simultaneously. Based on separate experiments, the elastic modulus of the ulna and radius were determined to be 13.8 and 9.9 GPa, respectively. Another novel aspect of the numerical model is the inclusion of the interosseous membrane in the FE model with membrane stiffness ranging from 5-15 N/mm that have been found to give strain values closer to that from the experiments. Interestingly, the inclusion of the interosseous membrane helped to equalize the peak strain magnitudes in the ulna and radius (∼1800 at 2 N load and ∼3200 at 3.5 N), which was also observed experimentally. This model represents a significant advance towards being able to simulate through FE analysis the strain fields generated in vivo upon mechanical loading of the mouse forearm.

Adaptation of tibial structure and strength to axial compression depends on loading history in both C57BL/6 and BALB/c mice

Tibial compression can increase murine bone mass. However, loading protocols and mouse strains differ between studies, which may contribute to conflicting results. We hypothesized that bone accrual is influenced more by loading history than by mouse strain or animal handling. The right tibiae of 4-month-old C57BL/6 and BALB/c mice were subjected to axial compression (10 N, 3 days/week, 6 weeks). Left tibiae served as contralateral controls to calculate relative changes: (loaded - control)/control. The WashU protocol applied 60 cycles/day, at 2 Hz, with a 10-s rest-insertion between cycles; the Cornell/HSS protocol applied 1,200 cycles/day, at 6.7 Hz, with a 0.1-s rest-insertion. Because sham loading, sedation, and transportation did not affect tibial morphology, unhandled mice served as age-matched controls (AC). Both loading protocols were anabolic for cortical bone, but Cornell/HSS loading elicited a more rapid response that was greater than WashU loading by 13 %. By 6 weeks, cortical bone volume of each loading group was greater than of AC (average + 16 %) and not different from each other. Ultimate displacement and energy to fracture were greater in tibiae loaded by either protocol, and ultimate force was greater with Cornell/HSS loading. At 6 weeks, independent of mouse strain, the WashU protocol produced minimal trabecular bone and the trabecular bone volume fraction of Cornell/HSS tibiae was greater than that of AC by 65 % and that of WashU by 44 %. We concluded that tibial adaptation to loading was more influenced by waveform than mouse strain or animal handling and therefore may have targeted similar osteogenic mechanisms in C57BL/6 and BALB/c mice.

Trabecular bone adapts to long-term cyclic loading by increasing stiffness and normalization of dynamic morphometric rates

Bone has the ability to adapt to external loading conditions. Especially the beneficial effect of short-term cyclic loading has been investigated in a number of in vivo animal studies. The aim of this study was to assess the long-term effect (>10 weeks) of cyclic mechanical loading on the bone microstructure, bone stiffness, and bone remodeling rates. Mice were subjected to cyclic mechanical loading at the sixth caudal vertebra with 8N or 0N (control) three times per week for a total period of 14 weeks. Structural bone parameters were determined from in vivo micro-computed tomography (micro-CT) scans performed at week 0, 4, 6, 8, 10, 12, and 14. Mechanical parameters were derived from micro-finite element analysis. Dynamic bone morphometry was calculated using registration of serial micro-CT scans. Bone volume fraction and trabecular thickness increased significantly more for the loaded group than for the control group (p = 0.006 and p = 0.002 respectively). The trabecular bone microstructure adapted to the load of 8N in approximately ten weeks, indicated by the trabecular bone volume fraction, which increased from 16.7% at 0 weeks to 21.6% at week 10 and only showed little change afterwards (bone volume fraction of 21.5% at 14 weeks). Similarly bone stiffness - (at the start of the experiment 649N/mm) - reached 846N/mm at 10 weeks in the loaded group and was maintained to the end of the experiment (850N/mm). At 4 weeks the bone formation rate was 32% greater and the bone resorption rate 22% less for 8N compared to 0N. This difference was significantly reduced as the bone adapted to 8N, with 8N remodeling rates returning to the values of the 0N group at approximately 10 weeks. Together these data suggest that once bone has adapted to a new loading state, the remodeling rates reduce gradually while maintaining bone volume fraction and stiffness.

Differential load-regulated global gene expression in mouse trabecular osteocytes

Osteocytes are considered the skeletal mechanosensors. However, because osteocytes, particularly trabecular, are barely accessible to in vivo molecular analyses, very little is known on the signals transmitted by these cells to the extra-trabecular milieu. To investigate so called "osteocytic genes" involved in extracellular signaling, we have used a recently developed model whereby a single caudal mouse vertebra (C5) is subjected to controlled compression loading and further devised a method for the isolation of high quality RNA from trabecular osteocytes. RNA samples from loaded and sham-loaded individual vertebrae where then subjected to gene array analysis following the administration of a single or repetitive loading doses (thrice weekly for 4 weeks). Focusing on extracellular genes potentially involved in mediating osteocyte-derived signals to the trabecular surface, we identified sets of genes differentially regulated by either single or multiple loading bouts as well as genes affected by both loading protocols. A comparison with published studies on load-regulated genes in cortical osteocytes revealed that the majority of these genes are specifically activated/silenced in the trabecular bone. Many of these genes could be clustered according to processes directly relevant to the life cycle and activity of osteoblasts and osteoclasts and their progenitors. The present findings are consistent with an osteocytic role in the control of trabecular bone remodeling and mass and provide a comprehensive database of load-regulated genes in trabecular osteocytes that is potentially useful in further mouse genetic studies and identification of drug targets to combat osteoporosis.

Bone mechanotransduction may require augmentation in order to strengthen the senescent skeleton

Physical exercise is thought to hold promise as a non-invasive countermeasure against skeletal fragility arising from post-menopausal and age-related osteoporosis. Importantly, mechanical loading and exercise are capable of increasing bone size via periosteal expansion, which by far, is the most effective means of strengthening the structure of a given bone. The focus of this review was to therefore explore whether exercise has the potential to increase periosteal modeling and bone size in the senescent skeleton. A survey of exercise trials in humans suggests that exercise interventions that enhance periosteal modeling in the young skeleton fail to do the same in the elderly skeleton. Underlying this ineffectiveness, in vitro studies indicate that aging lowers basal levels of cell function and degrades bone mechanotransduction at a variety of levels from altered second messenger signaling to gene expression driving proliferation and/or differentiation. Given these age-related alterations, the ultimate efficacy of an exercise intervention may depend upon concurrent supplementation that directly address deficits in signaling and/or cell function. In this context, in vivo animal models of mechanical loading that simulate the muted periosteal adaptation in the elderly hold potential to examine the efficacy of countermeasures. Preliminary in vivo experiments suggest that pharmacologically counteracting age-related deficits in cellular function can restore exercise induced periosteal modeling in the senescent skeleton to levels observed in young animals. If the safety and efficacy of this strategy were to be confirmed for human use, it would enable the utilization of exercise as a viable countermeasure against skeletal fragility at senescence.

Separating Fluid Shear Stress from Acceleration during Vibrations in Vitro: Identification of Mechanical Signals Modulating the Cellular Response

The identification of the physical mechanism(s) by which cells can sense vibrations requires the determination of the cellular mechanical environment. Here, we quantified vibration-induced fluid shear stresses in vitro and tested whether this system allows for the separation of two mechanical parameters previously proposed to drive the cellular response to vibration - fluid shear and peak accelerations. When peak accelerations of the oscillatory horizontal motions were set at 1g and 60Hz, peak fluid shear stresses acting on the cell layer reached 0.5Pa. A 3.5-fold increase in fluid viscosity increased peak fluid shear stresses 2.6-fold while doubling fluid volume in the well caused a 2-fold decrease in fluid shear. Fluid shear was positively related to peak acceleration magnitude and inversely related to vibration frequency. These data demonstrated that peak shear stress can be effectively separated from peak acceleration by controlling specific levels of vibration frequency, acceleration, and/or fluid viscosity. As an example for exploiting these relations, we tested the relevance of shear stress in promoting COX-2 expression in osteoblast like cells. Across different vibration frequencies and fluid viscosities, neither the level of generated fluid shear nor the frequency of the signal were able to consistently account for differences in the relative increase in COX-2 expression between groups, emphasizing that the eventual identification of the physical mechanism(s) requires a detailed quantification of the cellular mechanical environment.

Mouse tail vertebrae adapt to cyclic mechanical loading by increasing bone formation rate and decreasing bone resorption rate as shown by time-lapsed in vivo imaging of dynamic bone morphometry

It is known that mechanical loading leads to an increase in bone mass through a positive shift in the balance between bone formation and bone resorption. How the remodeling sites change over time as an effect of loading remains, however, to be clarified. The purpose of this paper was to investigate how bone formation and resorption sites are modulated by mechanical loading over time by using a new imaging technique that extracts three dimensional formation and resorption parameters from time-lapsed in vivo micro-computed tomography images. To induce load adaptation, the sixth caudal vertebra of C57BL/6 mice was cyclically loaded through pins in the adjacent vertebrae at either 8 N or 0 N (control) three times a week for 5 min (3000 cycles) over a total of 4 weeks. The results showed that mechanical loading significantly increased trabecular bone volume fraction by 20% (p<0.001) and cortical area fraction by 6% (p<0.001). The bone formation rate was on average 23% greater (p<0.001) and the bone resorption rate was on average 25% smaller (p<0.001) for the 8 N group than for the 0 N group. The increase in bone formation rate for the 8 N group was mostly an effect of a significantly increased surface of bone formation sites (on average 16%, p<0.001), while the thickness of bone formation packages was less affected (on average 5% greater, p<0.05). At the same time the surface of bone resorption sites was significantly reduced (on average 15%, p<0.001), while the depth of resorption pits remained the same. For the 8 N group, the strength of the whole bone increased significantly by 24% (p<0.001) over the loading period, while the strain energy density in the trabecular bone decreased significantly by 24% (p<0.001). In conclusion, mouse tail vertebrae adapt to mechanical loading by increasing the surface of formation sites and decreasing the surface of resorption sites, leading to an overall increase in bone strength. This new imaging technique will provide opportunities to investigate in vivo bone remodeling in the context of disease and treatment options, with the added value that both bone formation and bone resorption parameters can be nondestructively calculated over time.

Enhanced osteoclastic resorption and responsiveness to mechanical load in gap junction deficient bone

Emerging evidence suggests that connexin mediated gap junctional intercellular communication contributes to many aspects of bone biology including bone development, maintenance of bone homeostasis and responsiveness of bone cells to diverse extracellular signals. Deletion of connexin 43, the predominant gap junction protein in bone, is embryonic lethal making it challenging to examine the role of connexin 43 in bone in vivo. However, transgenic murine models in which only osteocytes and osteoblasts are deficient in connexin 43, and which are fully viable, have recently been developed. Unfortunately, the bone phenotype of different connexin 43 deficient models has been variable. To address this issue, we used an osteocalcin driven Cre-lox system to create osteoblast and osteocyte specific connexin 43 deficient mice. These mice displayed bone loss as a result of increased bone resorption and osteoclastogenesis. The mechanism underlying this increased osteoclastogenesis included increases in the osteocytic, but not osteoblastic, RANKL/OPG ratio. Previous in vitro studies suggest that connexin 43 deficient bone cells are less responsive to biomechanical signals. Interestingly, and in contrast to in vitro studies, we found that connexin 43 deficient mice displayed an enhanced anabolic response to mechanical load. Our results suggest that transient inhibition of connexin 43 expression and gap junctional intercellular communication may prove a potentially powerful means of enhancing the anabolic response of bone to mechanical loading.

An approach to quantifying bone overloading and hypertrophy with applications to multiple experimental studies

Many studies have investigated mechanically induced bone formation in mice and rats by applying loads to the long bones, and measuring changes in periosteal cortical bone apposition rates. However, the results are difficult to compare among each other because the loading schemes are generally different. The purpose of the present study was to develop a theoretical framework for evaluating the mechanical stimulus based on the bone daily strain stimulus, which is a function of loading cycles and bone strains. The daily strain stimulus would act as a single unifying parameter for directly comparing data from existing in vivo experiments, and is applied here to twenty previous rat and mouse studies. To calculate the daily strain stimulus, we determined the periosteal daily strain stimulus necessary for bone maintenance (xi(peri,0)) and the strain-cycle weighting exponent (m). In the first approach, we applied data from Rubin and Lanyon's bone maintenance studies. We calculated xi(peri,0) to be 2793 microstrain/day, and m to be 4.5. In the second approach, we used Fritton et al. 's strain gage recordings to calculate xi(peri,0) to be 1496 microstrain/day, and used an m value of 11.88, equal to human bone compressive fatigue properties. Fatigue data provided physiological relevance, and was useful for applying an established remodeling theory to in vivo studies. For both approaches, xi(peri,0) was below the fracture level. We then analyzed the applied strains, cycles, and periosteal bone apposition rates from the previous studies. The range of daily strain stimuli calculated using the first approach was much larger than the range using the second approach (2793-17312 microstrain/day compared to 1496-7681 microstrain/day). None of the studies applied a daily strain stimulus above the complete fatigue failure level, but some studies applied loading that could result in major fatigue microdamage. Bone apposition rates generally increased with increasing daily strain stimulus, which was consistent with previous theoretical models. The results suggest that the daily strain stimulus may be a reasonable first approximation for predicting bone apposition rates in a consistent manner. The use of the daily strain stimulus may be helpful for improving the design of future bone loading studies.

Functional adaptation to mechanical loading in both cortical and cancellous bone is controlled locally and is confined to the loaded bones

In order to validate whether bones' functional adaptation to mechanical loading is a local phenomenon, we randomly assigned 21 female C57BL/6 mice at 19 weeks of age to one of three equal numbered groups. All groups were treated with isoflurane anesthesia three times a week for 2 weeks (approximately 7 min/day). During each anaesthetic period, the right tibiae/fibulae in the DYNAMIC+STATIC group were subjected to a peak dynamic load of 11.5 N (40 cycles with 10-s intervals between cycles) superimposed upon a static "pre-load" of 2.0 N. This total load of 13.5 N engendered peak longitudinal strains of approximately 1400 microstrain on the medial surface of the tibia at a middle/proximal site. The right tibiae/fibulae in the STATIC group received the static "pre-load" alone while the NOLOAD group received no artificial loading. After 2 weeks, the animals were sacrificed and both tibiae, fibulae, femora, ulnae and radii analyzed by three-dimensional high-resolution (5 mum) micro-computed tomography (microCT). In the DYNAMIC+STATIC group, the proximal trabecular percent bone volume and cortical bone volume at the proximal and middle levels of the right tibiae as well as the cortical bone volume at the middle level of the right fibulae were markedly greater than the left. In contrast, the left bones in the DYNAMIC+STATIC group showed no differences compared to the left or right bones in the NOLOAD or STATIC group. These microCT data were confirmed by two-dimensional examination of fluorochrome labels in bone sections which showed the predominantly woven nature of the new bone formed in the loaded bones. We conclude that the adaptive response in both cortical and trabecular regions of bones subjected to short periods of dynamic loading, even when this response is sufficiently vigorous to stimulate woven bone formation, is confined to the loaded bones and does not involve changes in other bones that are adjacent, contra-lateral or remote to them.