Immobilisation of Candida rugosa lipase on a highly hydrophobic support: A stable immobilised lipase suitable for non-aqueous synthesis

Adsorption of extracellular lipase in a packed-bed reactor: an alternative immobilization approach

In light of the growing demand for novel biocatalysts and enzyme production methods, this study aimed to evaluate the potential of Aspergillus tubingensis for producing lipase under submerged culture investigating the influence of culture time and inducer treatment. Moreover, this study also investigated conditions for the immobilization of A. tubingensis lipase by physical adsorption on styrene-divinylbenzene beads (Diaion HP-20), for these conditions to be applied to an alternative immobilization system with a packed-bed reactor. Furthermore, A. tubingensis lipase and its immobilized derivative were characterized in terms of their optimal ranges of pH and temperature. A. tubingensis was shown to be a good producer of lipase, obviating the need for inducer addition. The enzyme extract had a hydrolytic activity of 23 U mL-1 and achieved better performance in the pH range of 7.5 to 9.0 and in the temperature range of 20 to 50 °C. The proposed immobilization system was effective, yielding an immobilized derivative with enhanced hydrolytic activity (35 U g-1), optimum activity over a broader pH range (5.6 to 8.4), and increased tolerance to high temperatures (40 to 60 ℃). This research represents a first step toward lipase production from A. tubingensis under a submerged culture and the development of an alternative immobilization system with a packed-bed reactor. The proposed system holds promise for saving time and resources in future industrial applications.

Octadecyl and sulfonyl modification of diatomite synergistically improved the immobilization efficiency of lipase and its application in the synthesis of pine sterol esters

Phytosterols usually have to be esterified to various phytosterol esters to avoid their disadvantages of unsatisfactory solubility and low bioavailability. The enzymatic synthesis of phytosterol esters in a solvent-free system has advantages in terms of environmental friendliness, sustainability, and selectivity. However, the limitation of the low stability and recyclability of the lipase in the solvent-free system, which often requires a relatively high temperature to induce the viscosity, also increased the industrial production cost. In this context, a low-cost material, namely diatomite, was employed as the support in the immobilization of Candida rugosa lipase (CRL) due to its multiple modification sites. The Fe3 O4 was also then introduced to this system for quick and simple separation via the magnetic field. Moreover, to further enhance the immobilization efficiency of diatomite, a modification strategy which involved the octadecyl and sulfonyl group for regulating the hydrophobicity and interaction between the support and lipase was successfully developed. The optimization of the ratio of the modifiers suggested that the -SO3 H/C18 (1:1.5) performed best with an enzyme loading and enzyme activity of 84.8 mg·g-1 and 54 U·g-1 , respectively. Compared with free CRL, the thermal and storage stability of CRL@OSMD was significantly improved, which lays the foundation for the catalytic synthesis of phytosterol esters in solvent-free systems. Fortunately, a yield of 95.0% was achieved after optimizing the reaction conditions, and a yield of 70.0% can still be maintained after six cycles.

Study on the synthesis of pine sterol esters in solvent-free systems catalyzed by Candida rugosa lipase immobilized on hydrophobic macroporous resin

BACKGROUND

Pine sterol ester is a type of novel food source nutrient with great advantages in lowering blood cholesterol levels, inhibiting tumors, preventing prostate enlargement, and regulating immunity. Macroporous resins with large specific surface area, stable structures, and various functional groups (epoxy, amino, and octadecyl groups) have been selected for immobilization of Candida rugosa lipase (CRL) to improve its stability and efficiency in the synthesis of pine sterol esters. A solvent-free strategy using oleic acid (substrate) as an esterification reaction medium is an important alternative for avoiding the use of organic solvents.

RESULTS

The immobilization conditions of CRL immobilized on several types of commercial macroporous resins were optimized. Fortunately, by adsorption (hydrophobic interaction), a high immobilization efficiency of CRL was obtained using macroporous resins with hydrophobic octadecyl groups with an immobilization efficiency of 86.5%, enzyme loading of 138.5 mg g-1 and enzyme activity of 34.7 U g-1 . The results showed that a 95.1% yield could be obtained with a molar ratio of oleic acid to pine sterol of 5:1, an enzyme amount of 6.0 U g-1 (relative to pine sterol mass) at 50 °C for 48 h.

CONCLUSION

The hydrophobic macroporous resin (ECR8806M) with a large specific surface area and abundant functional groups was used to achieve efficient immobilization of CRL. CRL@ECR8806M is an efficient catalyst for the synthesis of phytosterol esters and has the potential for further large-scale applications. Therefore, this simple, green, and low-cost strategy for lipase immobilization provides new possibilities for the high-efficiency production of pine sterol esters and other food source nutrients. © 2023 Society of Chemical Industry.

Synthesis of Ibuprofen Monoglyceride Using Novozym®435: Biocatalyst Activation and Stabilization in Multiphasic Systems

This work was focused on the enzymatic esterification of glycerol and ibuprofen at high concentrations in two triphasic systems composed of toluene+ibuprofene (apolar) and glycerol or glycerol–water (polar) liquid phases, and a solid phase with the industrial immobilized lipase B from Candida antarctica named Novozym®435 (N435) acting as the biocatalyst. Based on a preliminary study, the concentration of the enzyme was set at 30 g·L−1 and the stirring speed at 720 r.p.m to reduce external mass transfer limitations. To obtain more information on the reaction system, it was conducted at a wide range of temperatures (50 to 80 °C) and initial concentrations of ibuprofen (20–100 g·L−1, that is, 97 to 483 mM). Under these experimental conditions, the external mass transfer, according to the Mears criterion (Me = 1.47–3.33·10−4 << 0.15), was fast, presenting no limitation to the system productivity, regardless of the presence of water and from 50 to 80 °C. Considering that the enzyme is immobilized in a porous ion-exchange resin, limitations due to internal mass transfer can exist, depending on the values of the effectiveness factor (η). It varied from 0.14 to 0.23 at 50 to 80 °C and 0.32–1 mm particle diameter range in the absence of water, and in the same ranges, from 0.40 to 0.66 in the presence of 7.4% w/w water in the glycerol phase. Thus, it is evident that some limitation occurs due to mass transfer inside the pores, while the presence of water in the polar phase increases the productivity 3–4 fold. During the kinetic study, several kinetic models were proposed for both triphasic reacting systems, with and without first-order biocatalyst deactivation, and their fit to all relevant experimental data led to the observation that the best kinetic model was a reversible hyperbolic model with first-order deactivation in the anhydrous reaction system and a similar model, but without deactivation, for the system with added water at zero time. This fact is in sharp contrast to the use of N435 in a water-glycerol monophasic system, where progressive dissolution of ibuprofen in the reacting media, together with a notable enzyme deactivation, is observed.

Recent Advances in Lipases and Their Applications in the Food and Nutraceutical Industry

Lipases are efficient enzymes with promising applications in the nutraceutical and food industry, as they can offer high yields, pure products under achievable reaction conditions, and are an environmentally friendly option. This review addresses the production of high-value-added compounds such as fatty acid esters, with the potential to be used as flavoring agents or antioxidant and antimicrobial agents, as well as structured lipids that offer specific functional properties that do not exist in nature, with important applications in different food products, and pharmaceuticals. In addition, the most recent successful cases of reactions with lipases to produce modified compounds for food and nutraceuticals are reported.

Diversifying Arena of Drug Synthesis: In the Realm of Lipase Mediated Waves of Biocatalysis

Hydrolases, being most prominent enzymes used in industrial processes have left no stone unturned in fascinating the pharmaceutical industry. Lipases, being a part of acyl hydrolases are the ones that function similarly to esterases (except an interfacial action) wherein they generally catalyze the hydrolysis of ester bonds. Be it in terms of stereoselectivity or regioselectivity, lipases have manifested their promiscuous proficiency in rendering biocatalytic drug synthesis and intermediates thereof. Industrial utilization of lipases is prevalent since decades ago, but their distinctive catalytic competencies have rendered them suitable for maneuverability in various tides of biocatalytic industrial process development. Numbers of exquisite catalysts have been fabricated out of lipases using nanobiotechnology whereby enzyme reusability and robustness have been conferred to many of the organic synthesis procedures. This marks a considerable achievement of lipases in the second wave of biocatalysis. Furthermore, in the third wave an advent of genetic engineering has fostered an era of customized lipases for suitable needs. Be it stability or an enhanced efficacy, genetic engineering techniques have ushered an avenue for biocatalytic development of drugs and drug intermediates through greener processes using lipases. Even in the forthcoming concept of co-modular catalytic systems, lipases may be the frontiers because of their astonishing capability to act along with other enzymes. The concept may render feasibility in the development of cascade reactions in organic synthesis. An upcoming wave demands fulfilling the vision of tailored lipase whilst a far-flung exploration needs to be unveiled for various research impediments in rendering lipase as a custom fit biocatalyst in pharmaceutical industry.

Opportunistic yeast pathogen Candida spp.: Secreted and membrane-bound virulence factors

Candidiasis is a fungal infection caused by Candida spp. especially Candida albicans, C. glabrata, C. parapsilosis and C. tropicalis. Although the medicinal therapeutic strategies have rapidly improved, the mortality rate due to candidiasis has continuously increased. The secreted and membrane-bound virulence factors (VFs) are responsible for fungal invasion, damage and translocation through the host enterocytes besides the evasion from host immune system. VFs such as agglutinin-like sequences (Als), heat shock protein 70, phospholipases, secreted aspartyl proteinases (Sap), lipases, enolases and phytases are mostly hydrolases which degrade the enterocyte membrane components except for candidalysin, the VF acts as a peptide toxin to induce necrotic cell lysis. To date, structural studies of the VFs remain underexplored, hindering their functional analyses. Among the VFs, only secreted aspartyl proteinases and agglutinin-like sequences have their structures deposited in Protein Data Bank (PDB). Therefore, this review scrutinizes the mechanisms of these VFs by discussing the VF-deficient studies of several Candida spp. and their abilities to produce these VFs. Nonetheless, their latest reported sequential and structural analyses are discussed to impart a wider perception of the host-pathogen interactions and potential vaccine or antifungal drug targets. This review signifies that more VFs structural investigations and mining in the emerging Candida spp. are required to decipher their pathogenicity and virulence mechanisms compared to the prominent C. albicans.

LAY ABSTRACT

Candida virulence factors (VFs) including mainly enzymes and proteins play vital roles in breaching the human intestinal barrier and causing deadly candidiasis. Limited VFs' structural studies hinder deeper comprehension of their mechanisms and thus the design of vaccines and antifungal drugs against fungal infections.

Agroindustrial Wastes as a Support for the Immobilization of Lipase from Thermomyces lanuginosus: Synthesis of Hexyl Laurate

As a consequence of intense industrialization in the last few decades, the amount of agro-industrial wastes has increasing, where new forms of valorization are crucial. In this work, five residual biomasses from Maranhão (Brazil) were investigated as supports for immobilization of lipase from Thermomyces lanuginosus (TLL). The new biocatalysts BM-TLL (babaçu mesocarp) and RH-TLL (rice husk) showed immobilization efficiencies >98% and hydrolytic activities of 5.331 U g^-1 and 4.608 U g^-1, respectively, against 142 U g^-1 by Lipozyme^® TL IM. High esterification activities were also found, with 141.4 U g^-1 and 396.4 U g^-1 from BM-TLL and RH-TLL, respectively, against 113.5 U g^-1 by TL IM. Results of porosimetry, SEM, and BET demonstrated BM and RH supports are mesoporous materials with large hydrophobic area, allowing a mixture of hydrophobic adsorption and confinement, resulting in hyperactivation of TLL. These biocatalysts were applied in the production of hexyl laurate, where RH-TLL was able to generate 94% conversion in 4 h. Desorption with Triton X-100 and NaCl confirmed that new biocatalysts were more efficient with 5 times less protein than commercial TL IM. All results demonstrated that residual biomass was able to produce robust and stable biocatalysts containing immobilized TLL with better results than commercial preparations.