Agricultural waste of sugarcane bagasse as efficient adsorbent for lead and nickel removal from untreated wastewater: Biosorption, equilibrium isotherms, kinetics and desorption studies

Adsorption and desorption processes of toxic heavy metals, regeneration and reusability of spent adsorbents: Economic and environmental sustainability approach

A growing number of variables, including rising population, water scarcity, growth in the economy, and the existence of harmful heavy metals in the water supply, are contributing to the increased demand for wastewater treatment on a global scale. One of the innovative water treatment technologies is the adsorptive removal of heavy metals through the application of natural and engineered adsorbents. However, adsorption currently has setbacks that prevent its wider application for heavy metals sequestration from aquatic environments using various adsorbents, including difficulty in selecting suitable desorption eluent to recover adsorbed heavy metals and regeneration techniques to recycle the spent adsorbents for further use and safe disposal. Therefore, the recovery of adsorbed heavy metal ions and the ability to reuse the spent adsorbents is one of the economic and environmental sustainability approaches. This study presents a state-of-the-art critical review of different desorption agents that could be used to retrieve heavy metals and regenerate the spent adsorbents for further adsorption-desorption processes. Additionally, an attempt was made to discuss and summarize some of the independent factors influencing heavy metals desorption, recovery, and adsorbent regeneration. Furthermore, isotherm and kinetic modeling have been summarized to provide insights into the adsorption-desorption mechanisms of heavy metals. Finally, the review provided future perspectives to provide room for researchers and industry players who are interested in heavy metals desorption, recovery, and spent adsorbents recycling to reduce the high cost of adsorbents reproduction, minimize secondary waste generation, and thereby provide substantial economic and environmental benefits.

Potentials of mono- and multi-metal ion removal from water with cotton stalks and date palm stone residuals

In this work, cotton stalks (Gossypium barbadense) and date palm stones (Phoenix dactylifera) have been used as biosorbents to remove cadmium; Cd(II), lead; Pb(II), and zinc; Zn(II) from mono- and multi-solutions. Each biosorbent was characterized using SEM-EDX, and FT-IR. The findings showed that pH, dose, contact time, metal concentration, and particle size affect the treatment process. The adsorption pattern was Pb(II) > Cd(II) > Zn(II) for both biosorbents. The adsorption performance of cotton stalks was higher than that of date palm stones. The fitted maximum uptake capacities; qm of cotton stalks were higher than those of date palm stones. The maximum adsorption at optimum conditions of Pb(II), Cd(II), and Zn(II) with cotton stalks were 98%, 92.1%, and 78.9%, respectively, within 30 min. While the maximum adsorption of Pb(II), Cd(II), and Zn(II) with date palm stones were 94.6%, 76%, and 68.6%, respectively. Results confirmed the antagonistic effect of heavy metal removal at optimum conditions. Biosorbents could remove ~ 100% of the metal ions from real wastewater samples. Regeneration investigation revealed a successful reusability of both biosorbents for four cycles.

Removal of Cr(VI) from Wastewater Using Acrylonitrile Grafted Cellulose Extracted from Sugarcane Bagasse

A highly efficient low-cost adsorbent was prepared using raw and chemically modified cellulose isolated from sugarcane bagasse for decontamination of Cr(VI) from wastewater. First, cellulose pulp was isolated from sugarcane bagasse by subjecting it to acid hydrolysis, alkaline hydrolysis and bleaching with sodium chlorate (NaClO3). Then, the bleached cellulose pulp was chemically modified with acrylonitrile monomer in the presence Fenton's reagent (Fe+2/H2O2) to carry out grafting of acrylonitrile onto cellulose by atom transfer radical polymerization. The developed adsorbent (acrylonitrile grafted cellulose) was analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Both raw cellulose and acrylonitrile grafted cellulose were used for chromium removal from wastewater. The effects of metal ion concentration, pH, adsorbent dose and time were studied, and their values were optimized. The optimum conditions for the adsorption of Cr(VI) onto raw and chemically modified cellulose were: metal ion concentration: 50 ppm, adsorbent dose: 1 g, pH: 6, and time: 60 min. The maximum efficiencies of 73% and 94% and adsorption capacities of 125.95 mg/g and 267.93 mg/g were achieved for raw and acrylonitrile grafted cellulose, respectively. High removal efficiency was achieved, owing to high surface area of 79.92 m2/g and functional active binding cites on grafted cellulose. Isotherm and kinetics studies show that the experimental data were fully fitted by the Freundlich isotherm model and pseudo first-order model. The adsorbent (acrylonitrile grafted cellulose) was regenerated using three different types of regenerating reagents and reused thirty times, and there was negligible decrease (19%) in removal efficiency after using it for 30 times. Hence, it is anticipated that acrylonitrile could be utilized as potential candidate material for commercial scale Cr(VI) removal from wastewater.

Comprehensive assessment of carbon-, biomaterial- and inorganic-based adsorbents for the removal of the most hazardous heavy metal ions from wastewater

Owing to the high cost of recycling waste, underdeveloped countries discharge industrial, agricultural, and anthropogenic effluents without pretreatment. As a result, pollutant-loaded waste enters water bodies. Among the diverse toxic contaminants, heavy metal ions are the most detrimental because of their chronic toxicity, non-degradability, prevalence, and bioaccumulation. The growing shortage of water resources demands the removal of heavy metal ions from wastewater. Three SDGs of the sustainability agenda of the United Nations appeal for clean water to protect life beneath water and on land depending on the water sources. Therefore, efficient environmentally friendly approaches for wastewater treatment are urgently required. In this regard, several methods have been developed for the removal of heavy metal ions from wastewater, including adsorption as the most widely used method owing to its eco-friendly, cost-effective, and sustainable nature. The present review discusses the progress in the preparation and application of various adsorbents based on carbon, micro-organisms, agricultural waste and inorganic materials for the extraction of toxic metal ions such as Pb2+, Cr6+, As3+, As5+, Hg2+ and Cd2+. Herein, we provide information on the role of the homogeneity and heterogeneity of adsorbents, kinetics of the adsorption of an adsorbate on the surface of an adsorbent, insights into adsorption reaction pathways, the mechanism of the sorption process, and the uptake of solutes from solution. The present review will be useful for researchers working on environmental protection and clean environment.

Valorization of sugarcane bagasse for high-yield production of laccase through Aspergillus terreus for effective azo dye decolourization

Synthetic dyes such as azo dyes are significant pollutants in the wastewater released from various textile industries. The low biodegradability and production from synthetic sources with high shelf life make azo dyes a challenging material for degradation. This study used chemically mutated Aspergillus terrus in the laccase production under solid-state fermentation using sugarcane bagasse. Initially, the wild-type strain produced a laccase activity of 4.12 U/mL. Later, the alkaline pretreatment of sugarcane bagasse showed a significant increase in laccase activity by 38.9%. Further, random mutagenesis treatment with 100 mM EMS generated a hyper laccase-producing strain with a 2.3-fold increment in laccase activity compared to the wild-type strain. The enzyme displayed optimal activity at pH 6.5 and 35 °C. The metal ions such as Fe3+ (29.4 U/mL), Fe2+ (20.8 U/mL) and Cu2+ (18.05 U/mL) showed positive effects on laccase activity. The crude laccase was used to bioremediate Congo red, a prominent azo dye used in textile and pharmaceutical industries. The preliminary studies with a crude enzyme displayed 68.86% dye decolourization after 24 h of incubation. Additionally, with Taguchi orthogonal array optimization experiments, the maximal dye decolorization of 78.24% was achieved by maintaining crude enzyme concentration (20 U), dye concentration (25 mg/L) and pH 4.5.

Rooibos tea waste binary oxide composite: An adsorbent for the removal of nickel ions and an efficient photocatalyst for the degradation of ciprofloxacin

In this study, rooibos tea waste (RTW) incorporated with a binary oxide (BO; Fe2O3-SnO2) has been reported for the first time as a highly efficient adsorbent material for the elimination of Ni(II) ions. The as-synthesised rooibos tea waste-binary oxide (RWBO) composite adsorbent was characterised using miscellaneous techniques such as FTIR, XRD, SEM, EDX, TGA, BET, and XPS. The RWBO was then tested for the removal of Ni(II) in a batch adsorption experiment. The composite adsorbent showed a great removal efficiency of about 99.75% for Ni(II) ions at 45 °C, 180 min agitation time, pH 7, and dosage of 250 mg. The adsorption process was found to be endothermic and spontaneous. Also, the spent adsorbent [RWBO-Ni(II)] was found to be solar light active with a narrow band gap of 1.4 eV. It was further used as a photocatalyst for the photocatalytic abatement of 10 mg/L ciprofloxacin with an extent of degradation of 83% obtained after 150 min. In addition, the extent of mineralisation of the ciprofloxacin by the spent adsorbent as obtained from the TOC data was found to be 64%. Overall, the RWBO composite adsorbent lends itself as an efficient, eco-friendly and promising material for environmental remediation.

Potential of using Alfa grass fibers (Stipa Tenacissima L.) to remove Pb2+, Cu2+, and Zn2+ from an aqueous solution

This study used alfa grass fibres as a natural low-cost adsorbent to remove lead, copper, and zinc ions from aqueous solutions. The adsorbent was characterized by FTIR, SEM, BET surface area, ATG, and XRD techniques. The effects of pH, contact time, initial metal concentration, and adsorbent dosage on the adsorption efficiency were evaluated in batch experiments. The results showed that the adsorption of all metals was fast, and optimal removal efficiency was achieved within 25 min of contact time using 5000 mg/L of Alfa fibres at pH 6.3. The adsorption selectivity order was Pb2+ > Cu2+ > Zn2+ with Pb2+ removal efficiencies up to 97.6%. The adsorption kinetics were best explained by a pseudo-second-order kinetic model. The experimental adsorption data fitted very well with the Langmuir isotherm model, and less well with the Freundlich and Temkin isotherm models. The maximum adsorption capacities were respectively 14.492, 11.904, and 8.695 mg/g for Pb2+, Cu2+, and Zn2+. The results of this study indicated that Alfa fibres could be used as effective adsorbent for the removal of Pb2+, Cu2+, and Zn2+ from aqueous solutions.

Hagenia abyssinica-Biomediated Synthesis of a Magnetic Fe3O4/NiO Nanoadsorbent for Adsorption of Lead from Wastewater

Magnetic nanocomposite adsorbents are cost-effective, environmentally friendly, easy to use, and highly efficient at removing metals from large volumes of wastewater in a short time by using an external magnetic field. In this study, an Fe3O4/NiO composite nanoadsorbent was prepared by varying the mass percent ratios of NiO (50, 40, 30, 20%), which are denoted Fe3O4/50%NiO, Fe3O4/40%NiO, Fe3O4/30%NiO, and Fe3O4/20%NiO, respectively, using Hagenia abyssinica plant extract as the template/capping agent and a simple mechanical grinding technique. The nanocomposites were characterized using an X-ray diffractometer (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, nitrogen adsorption, and ζ-potential measurements. The adsorption performance of the nanoadsorbent was assessed for the removal of lead (Pb2+) ions from aqueous solutions. Among the composite adsorbents, Fe3O4/50%NiO demonstrated the best Pb(II) removal efficiency (96.65%) from aqueous solutions within 80 min at pH 8, at a 100 mg/L lead concentration and 0.09 g of adsorbent dose. However, with the same parameter, only 62.8% of Pb(II) was removed using Fe3O4 nanoparticles (NPs). The adsorptive performance indicated that the optimum amount of porous material (NiO) in the preparation of the Fe3O4/NiO composite nanoadsorbent, with the aid of H. abyssinica plant extract, enhances the removal of toxic heavy metals from aqueous solutions. Multiple isotherm and kinetic models were used to analyze the equilibrium data. Adsorption isotherm and kinetic studies were found to follow the Freundlich isotherm and pseudo-second-order kinetics, respectively.

Health burden of sugarcane burning on agricultural workers and nearby communities

Sugarcane is the most widely cultivated crop in the world, with equatorial developing nations performing most of this agriculture. Burning sugarcane is a common practice to facilitate harvest, producing extremely high volumes of respirable particulate matter in the process. These emissions are known to have deleterious effects on agricultural workers and nearby communities, but the extent of this exposure and potential toxicity remain poorly characterized. As the epidemicof chronic kidney disease of an unknown etiology (CKDu) and its associated mortality continue to increase along with respiratory distress, there is an urgent need to investigate the causes, determine viable interventions to mitigate disease andimprove outcomes for groups experiencing disproportionate impact. The goal of this review is to establish the state of available literature, summarize what is known in terms of human health risk, and provide recommendations for what areas should be prioritized in research.

Application of conventional and emerging low-cost adsorbents as sustainable materials for removal of contaminants from water

The impact of water pollution has led to the search for cost-effective and environmentally friendly treatment processes to alleviate the associated environmental hazards. Adsorption is identified as an advanced treatment technology that offers simplicity and cheap alternatives to water treatment technologies when low-cost adsorbents such as industrial by-products, waste, and agricultural waste are utilized. The utilization of these materials as low-cost adsorbents for the treatment of drinking water will bring them some value. Several practices have been done to improve the removal efficiencies of the low-cost adsorbents in order to achieve WHO standards of drinking water quality. The paper highlights some of the synthesis routes employed for the modification of low-cost adsorbents. This updated review provides information on the different applications of low-cost adsorbents in removing pollutants and their adsorption capacities in an attempt to deploy the recent sustainable low-cost adsorbents with high removal efficiencies for water treatment. Future research should focus on the fabrication of hybrid low-cost adsorbents with multifunctional and antimicrobial properties. In addition, life cycle assessment (LCA) should be conducted to reveal the environmental burdens associated with the modification of the low-cost adsorbent to improve their removal efficiencies.

Effective Removal of Cd(II) from Aqueous Solutions Using Theobroma cacao Agro-Industrial Waste

Theobroma cacao agro-industrial waste (WTC) has been characterized and tested as an effective biosorbent to remove Cd(II) from aqueous media. At the optimum pH of 5.0, a maximum adsorption capacity of q_e,max = 58.5 mg g^-1 was determined. The structural and morphological characterization have been conducted by FTIR, SEM/EDX, and TGA measurements. The SEM/EDX results confirmed that the metals are adsorbed on the surface. C-O-C, OH, CH, NH, and C=O functional groups were identified by FTIR. TGA results were consistent with the presence of hemicellulose. Biosorption kinetics were rapid during the first 30 min and then reached equilibrium. The corresponding experimental data were well fitted to pseudo-first and -second order models, the latter being the best. The biosorption isotherm data were also well fitted to Temkin, Langmuir, and Freundlich models, showing that several sorption mechanisms may be involved in the Cd(II) biosorption process, which was characterized as exothermic (ΔH⁰ < 0), feasible, and spontaneous (ΔG⁰ < 0). In binary (Cd-Pb and Cd-Cu) and ternary (Cd-Pb-Cu) systems, Cu(II) and particularly Pb(II) co-cations exert strong antagonistic effects. Using HNO₃, effective good regeneration of WTC was obtained to efficiently remove Cd(II) up to three times.

Adsorption of Cd (II) by a novel living and non-living Cupriavidus necator GX_5: optimization, equilibrium and kinetic studies

Biosorbents have been extensively studied for heavy metal adsorption due to their advantages of low cost and high efficiency. In the study, the living and non-living biomass of Cupriavidus necator GX_5 previously isolated were evaluated for their adsorption capacity and/or removal efficiency for Cd (II) through batch experiments, SEM and FT-IR investigations. The maximum removal efficiency rates for the live and dead biomass were 60.51% and 78.53%, respectively, at an optimum pH of 6, a dosage of 1 g/L and an initial Cd (II) concentration of 5 mg/L. The pseudo-second-order kinetic model was more suitable for fitting the experimental data, indicating that the rate-limiting step might be chemisorption. The Freundlich isotherm model fit better than the Langmuir isotherm model, implying that the adsorption process of both biosorbents was heterogeneous. FT-IR observation reflected that various functional groups were involved in Cd (II) adsorption: -OH, -NH, C=O, C-O and C-C groups for the living biomass and -OH, -NH, C-H, C = O, C-N and N-H groups for the dead biomass. Our results imply that non-living biosorbents have a higher capacity and stronger strength for absorbing Cd (II) than living biomass. Therefore, we suggest that dead GX_5 is a promising adsorbent and can be used in Cd (II)-contaminated environments.

Single and Binary Removals of Pb(II) and Cd(II) with Chemically Modified Opuntia ficus indica Cladodes

In this study, cladodes of Opuntia ficus indica (OFIC), chemically modified with NaOH (OFICM), have been prepared, characterized, and tested as an effective biomass to remove Pb(II) and/or Cd(II) from aqueous media. At an optimum pH of 4.5, the adsorption capacity, q_e, of treated OFICM was almost four times higher than that of untreated OFIC. The maximum adsorption capacities (q_max) in the single removal of Pb(II) and Cd(II) were 116.8 and 64.7 mg g^-1, respectively. These values were 12.1% and 70.6% higher than those for the corresponding q_max in binary removal, which indicates the strong inhibitive effect of Pb(II) on the co-cation Cd(II) in a binary system. Structural and morphological characterization have been carried out by FTIR, SEM/EDX, and point of zero charge (pH_PZC) measurements. The SEM/EDX results confirmed that the metals are adsorbed on the surface. The presence of C-O, C=O, and COO- functional groups were identified by FTIR on both OFIC and OFICM surfaces. On the other hand, we found that the adsorption processes followed the pseudo-second-order kinetics for both single and binary systems, with a fast biosorption rate of Pb(II) and Cd(II). The equilibrium data (adsorption isotherms) were better described by Langmuir and modified-Langmuir models for single and binary systems, respectively. A good regeneration of OFICM was obtained with an eluent of 0.1 M HNO₃. Therefore, OFICM can be efficiently reused to remove Pb or Cd, up to three times.

Bioaugmentation and enhanced formation of biogranules for degradation of oil and grease: Start-up, kinetic and mass transfer studies

Biogranulation technology is an emerging biological process in treating various wastewater. However, the development of biogranules requires an extended period of time when treating wastewaters with high oil and grease (O&G) content. A study was therefore conducted to assess the formation of biogranules through bioaugmentation with the Serratia marcescens SA30 strain, in treating real anaerobically digested palm oil mill effluent (AD-POME), with O&G of about 4600 mg/L. The biogranules were developed in a lab-scale sequencing batch reactor (SBR) system under alternating anaerobic and aerobic conditions. The experimental data were assessed using the modified mass transfer factor (MMTF) models to understand the mechanisms of biosorption of O&G on the biogranules. The system was run with variable organic loading rates (OLR) of 0.69-9.90 kg/m³d and superficial air velocity (SAV) of 2 cm/s. After 60 days of being bioaugmented with the Serratia marcescens SA30 strain, the flocculent biomass transformed into biogranules with excellent settleability with improved treatment efficiency. The biogranules showed a compact structure and good settling ability with an average diameter of about 2 mm, a sludge volume index at 5 min (SVI₅) of 43 mL/g, and a settling velocity (SV) of 81 m/h after 256 days of operation. The average removal efficiencies of O&G increased from 6 to 99.92%, respectively. The application of the MMTF model verified that the resistance to O&G biosorption is controlled via film mass transfer. This research indicates successful bioaugmentation of biogranules using the Serratia marcescens SA30 strain for enhanced biodegradation of O&G and is capable to treat real AD-POME.

Removal of Lead from Wastewater Using Synthesized Polyethyleneimine-Grafted Graphene Oxide

In this work, polyethyleneimine-grafted graphene oxide (PEI/GO) is synthesized using graphene, polyethyleneimine, and trimesoyl chloride. Both graphene oxide and PEI/GO are characterized by a Fourier-transform infrared (FTIR) spectrometer, a scanning electron microscope (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Characterization results confirm that polyethyleneimine is uniformly grafted on the graphene oxide nanosheets and, thus, also confirm the successful synthesis of PEI/GO. PEI/GO adsorbent is then evaluated for the removal of lead (Pb²⁺) from aqueous solutions, and the optimum adsorption is attained at pH 6, contact time of 120 min, and PEI/GO dose of 0.1 g. While chemosorption is dominating at low Pb²⁺ concentrations, physisorption is dominating at high concentrations and the adsorption rate is controlled by the boundary-layer diffusion step. In addition, the isotherm study confirms the strong interaction between Pb²⁺ ions and PEI/GO and reveals that the adsorption process obeys well the Freundlich isotherm model (R² = 0.9932) and the maximum adsorption capacity (q_m) is 64.94 mg/g, which is quite high compared to some of the reported adsorbents. Furthermore, the thermodynamic study confirms the spontaneity (negative ΔG° and positive ΔS°) and the endothermic nature (ΔH° = 19.73 kJ/mol) of the adsorption process. The prepared adsorbent (PEI/GO) offers a potential promise for wastewater treatment because of its fast and high uptake removal capacity and could be used as an effective adsorbent for the removal of Pb²⁺-ions and other heavy metals from industrial wastewater.

Modification of sugarcane bagasse with iron(III) oxide-hydroxide to improve its adsorption property for removing lead(II) ions

Lead contamination in wastewater results in toxicity of aquatic life and water quality, it is recommended to remove lead before discharging. Four sugarcane bagasse adsorbent materials of sugarcane bagasse powder (SB), sugarcane bagasse powder doped iron(III) oxide-hydroxide (SBF), sugarcane bagasse powder beads (SBB), and sugarcane bagasse powder doped iron(III) oxide-hydroxide beads (SBFB) were synthesized and characterized with various techniques. Their lead removal efficiencies were investigated by batch experiments on the effects of dose (0.1-0.6 g), contact time (1-6 h), pH (1, 3, 5, 7, 9, 11), and concentration (5-30 mg/L), adsorption isotherms, kinetics, and desorption experiments. All materials were amorphous phases presenting specific peaks of cellulose. SBB and SBFB detected sodium alginate peaks, and iron(III) oxide-hydroxide peaks were detected in SBF and SBFB. SB and SBF were scales or overlapping plate surfaces whereas SBB and SBFB had spherical shapes with coarse surfaces. The main functional groups of O-H, C=O, C-H, C-O, and C=C were observed in all materials, whereas Fe-O and -COOH were only found in materials with adding iron(III) oxide-hydroxide or bead material. The point of zero charges (pH_pzc) of all materials was higher than 4. The optimum conditions of SB, SBF, SBB, and SBFB with the highest lead removal efficiency at a lead concentration of 10 mg/L and pH 5 were 0.6 g and 6 h (96.08%), 0.2 g and 3 h (100%), 0.2 g and 2 h (98.22%), and 0. 1 g and 2 h (100%), respectively. Since SBFB spent less adsorbent dose and contact time than other materials with a lead removal efficiency of 100%, it was a more potential adsorbent than other materials. Thus, adding iron(III) oxide-hydroxide and changing material form helped to improve material efficiencies for lead adsorption. The maximum adsorption capacities of SB, SBF, SBB, and SBFB were 6.161, 27.027, 23.697, and 57.471 mg/L, respectively by fitting the Langmuir model. Langmuir isotherm was best fitted for SB and SBB, whereas the Freundlich model was best fitted for SBF and SBFB. The pseudo-second-order kinetic model was best fitted for all materials. Moreover, all adsorbents could be reused for more than 5 cycles with the lead removal efficiency of more than 73%. Therefore, SBFB was potential material to further apply for lead removal in industrial applications.

Targeting of neuroinflammation by glibenclamide in Covid-19: old weapon from arsenal

In coronavirus disease 2019 (Covid-19) era, neuroinflammation may develop due to neuronal tropism of severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) and/or associated immune activation, cytokine storm, and psychological stress. SARS-CoV-2 infection and linked cytokine storm may cause blood-brain barrier (BBB) injury through which activated immune cells and SARS-CoV-2 can pass into the brain causing activation of glial cells with subsequent neuroinflammation. Different therapeutic regimens were suggested to alleviate Covid-19-induced neuroinflammation. Since glibenclamide has anti-inflammatory and neuroprotective effects, it could be effective in mitigation of SARS-CoV-2 infection-induced neuroinflammation. Glibenclamide is a second-generation drug from the sulfonylurea family, which acts by inhibiting the adenosine triphosphate (ATP)-sensitive K channel in the regulatory subunit of type 1 sulfonylurea receptor (SUR-1) in pancreatic β cells. Glibenclamide reduces neuroinflammation and associated BBB injury by inhibiting the nod-like receptor pyrin 3 (NLRP3) inflammasome, oxidative stress, and microglial activation. Therefore, glibenclamide through inhibition of NLRP3 inflammasome, microglial activation, and oxidative stress may attenuate SARS-CoV-2-mediated neuroinflammation.

Arabica-coffee and teobroma-cocoa agro-industrial waste biosorbents, for Pb(II) removal in aqueous solutions

Agro-industrial waste biosorbents of arabica-coffee (WCA) and theobroma-cocoa (WCT) have been characterized and tested to remove Pb(II) from aqueous media. The maximum adsorption capacity of WCA and WCT (q_max = 158.7 and 123.5 mg·g^-1, respectively) is comparable or even higher than for several other similar agro-industrial waste biosorbents reported in the literature. Structural and morphological characterization were performed by infrared spectrometry with Fourier transform (FT-IR), scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), and charge measurements at the zero point charge (pH_PZC). Both biosorbents, WCA and WCT, show cracked surfaces with heterogeneous plates which ones include functional adsorption groups such as OH, C = O and C-O-C. Optimal Pb(II) adsorption occurs for a pH between 4 and 5 at [WCA] and [WCT] dose concentrations of 2 g·L^-1. We found that the adsorption process follows pseudo-second order kinetics with a rapid growth rate (almost six times larger for WCA than for WCT), basically controlled by the chemisorption process. The regeneration of both biosorbents was carried out in an eluent of 0.1M HNO₃ and they can be efficiently reused up to 5 times.

Pb(II) Ion Removal Potential in Chemically Modified Ziziphus joazeiro Barks

In this study, five types of modified Ziziphus joazeiro barks were investigated for the removal of Pb(II) ions from aqueous solutions. The samples tested were natural barks, natural powder, washed with water, ethanol at 80% (EE) and 0.5 N NaOH. Batch kinetics experiments were performed under the conditions: 24−25 °C, pH 5.5−5.8, 102 mg·L−1 Pb(NO3)2, 100 rpm and 0.1 g of adsorbent, and analyses of pHpzc and Fourier transform infrared spectroscopy. All adsorbents tested showed potential to remove Pb(II) ions, but the adsorbent washed by 0.5 N NaOH obtained the highest experimental performance (25.5 mg·g−1 at 30 min), while the EE had the least performance (20.4 mg·g−1 at 60 min), and maximum removals of 99.9%. The kinetic models pointed to a probable chemisorption due to the best fit of pseudo-second order and Elovich, and Boyd’s model, suggesting that intraparticle diffusion limits the adsorption until the initial minutes of contact. The Langmuir isotherm fitted better to the experimental data for the NaOH adsorbent, with maximum adsorption capacity equal to 62.5 mg·g−1, although the Temkin model partially fitted, both suggesting the occurrence of chemisorption. The adsorption process is reversible (>81% at 20 min) and hence the adsorbents can be recycled and the Pb(II) ions recovered.

Multivariate optimization applied to the synthesis and reuse of a new sugarcane bagasse-based biosorbent to remove Cd(II) and Pb(II) from aqueous solutions

This study reports the use of multivariate tools to optimize the synthesis of a new agricultural-based biosorbent derived from sugarcane bagasse (SB) for the removal of Cd(II) and Pb(II) from aqueous solutions, as well as to optimize the process of desorption of these ions from the spent biosorbent using an acidic solution. The effects of the reaction parameters temperature (T), time (t), and the ratio of 1,2,3,4-butanetetracarboxylic acid dianhydride (BTCAD) to raw SB (wBTCAD wraw SB-1) on the chemical modification of raw SB with BTCAD and on the equilibrium adsorption capacity (qe) for Cd(II) and Pb(II) were investigated by application of a 23 Doehlert experimental design (DED), followed by optimization using a statistical desirability tool to produce the best adsorbent in terms of performance and cost. The best reaction condition was wBTCAD wraw SB-1 of 4.0 g g-1, t of 1 h, and T of 70 ºC. The optimal synthesis condition resulted in a modified sugarcane bagasse (MSB) that provided qe values for Cd(II) and Pb(II) of 0.50 and 0.61 mmol g-1, respectively, obtained under the following conditions: 0.311 mmol Cd(II) L-1, 0.632 mmol Pb(II) L-1, pH 5.0, 4 h, 0.2 g L-1 MSB, 130 rpm, and 25 °C. The desorption of Cd(II) and Pb(II) from MSB was investigated by a 22 DED, with optimization using the desirability tool to obtain the best desorption condition in terms of HNO3 solution concentration ([Formula: see text]) and t. The desorption efficiencies for Cd(II) and Pb(II) were 90 ± 4% and 88 ± 3%, respectively, obtained using 0.7 mol L-1 HNO3, t of 42 min, and 1.0 g L-1 MSB-M(II) (M = Pb or Cd). Infrared spectroscopy was used to investigate the natures of the interactions involved in the adsorption of Cd(II) and Pb(II) on MSB, as well as possible changes in the chemical structure of MSB after desorption. The synthesis of MSB can be performed under mild reaction conditions (t = 1 h, T = 70 ºC), and the solvents used can be recovered by distillation. BTCA is commercially available at moderate cost and can alternatively be obtained employing microbial succinic acid, metal-free catalysis, and modest use of petrochemical feedstocks. Furthermore, MSB can be reused, which could contribute to increasing the economic feasibility of water and wastewater treatment processes.

Adsorption Study of Continuous Heavy Metal Ions (Pb2+, Cd2+, Ni2+) Removal Using Cocoa (Theobroma cacao L.) Pod Husks

The serious toxicological effects of heavy metal ions in aquatic ecosystems have motivated the search for alternatives to reduce contamination of water sources from industrial wastewater. In this work, continuous adsorption of nickel, cadmium, and lead was assessed using a packed bed column filled with Cocoa (Theobroma cacao L.) pod husks widely available in the northern region of Colombia. The physicochemical characterization of the agricultural biomass was performed to quantify its chemical composition by bromatological, FT-IR, and energy-dispersive X-ray spectroscopy (EDS). The breakthrough curves were constructed for all heavy metal ions with bed depth of 4 and 7.5 cm, taking aliquots at 10, 30, 60, 90, 120, 150, 180, 210, 240, and 270 min. Moreover, experimental data were fitted to adsorption models in continuous mode to predict adsorptive performance (Adams−Bohart, Thomas, and Yoon−Nelson). For the FT-IR analysis of biomass before and after adsorption, the most representative bands occur around 3200−3900 cm−1 attributed to the presence of hydroxyl groups, showing the destruction of the peaks of lignocellulosic materials. The breakthrough curves revealed that for a 7.5 cm bed, adsorption performance reported the following order of promising results: Pb2+ > Ni2+ > Cd2+; while for a 4 cm bed, Pb2+ > Ni2+. The mechanism of adsorption of the evaluated metals onto cocoa pod husk was attributed to cationic exchange and microprecipitation due to the presence of Ca, K, and Si in the structure of the bio-adsorbent. Finally, the continuous adsorption was modeled under the mathematical expressions of Adams−Bohart, Thomas, and Yoon−Nelson reporting good fitting with correlation coefficient above 0.95.

Valorization of sugarcane bagasse for sugar extraction and residue as an adsorbent for pollutant removal

Following juice crushing for sugar or bioethanol production from sugarcane, bagasse (SCB) is generated as the main lignocellulosic by-product. This study utilized SCB generated by a hydraulic press as feedstock to evaluate sugar extraction as well as adsorption potential. Total soluble sugar (sucrose, glucose, and fructose) of 0.4 g/g SCB was recovered with H2O extraction in this case. Insoluble sugar, that is, cellulose in SCB, was further hydrolyzed into glucose (2%–31%) with cellulase enzyme, generating a new bagasse residue (SCBE). Persulfate pretreatment of SCB slightly enhanced saccharification. Both SCB and SCBE showed great potential as adsorbents with 98% of methylene blue (MB) removed by SCB or SCBE and 75% of Cu2+ by SCBE and 80% by SCB in 60 min. The maximum adsorption amount (qm) was 85.8 mg/g (MB by SCB), 77.5 mg/g (MB by SCBE), 3.4 mg/g (Cu2+ by SCB), and 1.2 mg/g (Cu2+ by SCBE). The thermodynamics indicated that the adsorption process is spontaneous, endothermic, and more random in nature. The experimental results offer an alternative to better reutilize SCB.

Cement-Based Solidification/Stabilization as a Pathway for Encapsulating Palm Oil Residual Biomass Post Heavy Metal Adsorption

Heavy metal pollution is a serious issue currently affecting the environment and public health, which has been faced by applying several alternatives such as adsorption. In this work, the adsorption technique was employed to remove nickel and lead ions from an aqueous solution using palm oil residual biomass as a biosorbent. Desorption experiments were also conducted to evaluate the desorption capacity of this biomass over sorption–desorption cycles. The polluted biomass was used to prepare bricks (5 and 10% biomass content) to encapsulate heavy metal ions into the cement matrix. Both mechanical resistance and leaching testing were performed to determine the suitability of these bricks for construction applications. The experimental results revealed a good biosorbent dosage of 0.1 g/L. The highest desorption yields were calculated in 11 and 83.13% for nickel and lead, respectively. The compression resistance when 10% biomass was incorporated into the bricks was reported to be below the acceptable limit. Leaching testing suggested a successful immobilization of heavy metal ions onto the cement matrix. These results indicate that the application of this immobilization technique allows solving disposal problems of biomass loaded with heavy metal ions.

Modeling and Optimization of Heavy Metals Biosorption by Low-Cost Sorbents Using Response Surface Methodology

This paper exploits, through modeling and optimization, the experimental laboratory data on the biosorption of heavy metal ions Pb(II), Cd(II), and Zn(II) from aqueous media using soybean and soybean waste biomasses. The biosorption modeling was performed using the Response Surface Methodology, followed by optimization based on numerical methods. The aim of the modeling was to establish the most probable mathematical relationship between the dependent variables (the biosorption efficiency of the biosorbents when adsorbing metal ions, R(%), and the biosorption capacity of sorbents, q(mg/g)) and the process parameters (pH; sorbent dose, DS (g/L); initial metal ion concentration in solution, c0 (mg/L); contact time, tc (min); temperature, T (°C)), validated by methodologies specific to the multiple regression analysis. Afterward, sets of solutions were obtained through optimization that correlate various values of the process parameters to maximize the objective function. These solutions also confirmed the performance of soybean waste biomass in the removal of heavy metal ions from polluted aqueous effluents. The results were validated experimentally.

The protective role of selenium against uptake and accumulation of cadmium and lead in white oyster (Pleurotus ostreatus) and pink oyster (Pleurotus djamor) mushrooms

Mushrooms are bioaccumulators and have been used to produce Se-enriched foods. However, these fungi can also bioaccumulate potentially toxic metals, producing food dangerous to human health. It is known that co-exposure to Se plays a protective role against metal accumulation and toxicity in some organisms due to its antioxidant properties. Thus, this study aimed to evaluate the protective effect of Se(IV) and Se(VI) on elemental uptake and accumulation as well as proteins and protein-bound Se, Cd, and Pb distribution in Pleurotus mushrooms. Pink oyster and white oyster mushrooms showed high ability to bioaccumulate Se (19-205 µg g^-1), Cd (4.5 to 18.8 µg g^-1), and Pb (1.6 to 7.0 µg g^-1). Growth substrate supplementation with Se(IV) or Se(VI) decreased the Cd total concentration in mushrooms by 4 to 89%, while Se(VI) increased the Pb total concentration by 9% to 187%, compared to growth in absence of Se. It was found that despite molecular weights distributions of mushrooms grown on Se(IV) and Se(VI)-supplemented substrates being similar, Se(VI) supplementation favoured Se interaction with proteins of medium molecular weight (17-44 kDa), when compared to supplementation with Se(IV). Therefore, we propose the supplementation of growth substrates with Se(VI) to reduce eventual Cd accumulation and produce Se-enriched oyster mushrooms.

The Utilization of Algae and Seaweed Biomass for Bioremediation of Heavy Metal-Contaminated Wastewater

The presence of heavy metals in water bodies is linked to the increasing number of industries and populations. This has serious consequences for the quality of human health and the environment. In accordance with this issue, water and wastewater treatment technologies including ion exchange, chemical extraction, and hydrolysis should be conducted as a first water purification stage. However, the sequestration of these toxic substances tends to be expensive, especially for large scale treatment methods that require tedious control and have limited efficiency. Therefore, adsorption methods using adsorbents derived from biomass represent a promising alternative due to their great efficiency and abundance. Algal and seaweed biomass has appeared as a sustainable solution for environmentally friendly adsorbent production. This review further discusses recent developments in the use of algal and seaweed biomass as potential sorbent for heavy metal bioremediation. In addition, relevant aspects like metal toxicity, adsorption mechanism, and parameters affecting the completion of adsorption process are also highlighted. Overall, the critical conclusion drawn is that algae and seaweed biomass can be used to sustainably eliminate heavy metals from wastewater.

Removal of Lead by Merlinoite Prepared from Sugarcane Bagasse Ash and Kaolin: Synthesis, Isotherm, Kinetic, and Thermodynamic Studies

This study introduces a merlinoite synthesized from sugarcane bagasse ash (SBA) and kaolin and evaluates its application as an adsorbent to remove lead from wastewater. The synthesis was performed via the hydrothermal method, and optimal conditions were determined. The adsorption of Pb by merlinoite was also optimized. Determination of the Pb2+ remaining in the aqueous solution was determined by atomic absorption spectroscopy (AAS). Adsorption isotherms were mainly studied using the Langmuir and Freundlich models. The Langmuir model showed the highest consistency for Pb adsorption on merlinoite, yielding a high correlation coefficient (R2) of 0.9997 and a maximum adsorption capacity (qmax) of 322.58 mg/g. The kinetics of the adsorption process were best described by a pseudo-second-order model. Thermodynamic studies carried out at different temperatures established that the adsorption reaction was spontaneous and endothermic. The results of this study show that merlinoite synthesized from kaolinite and SBA is an excellent candidate for utilization as a high-performance adsorbent for lead removal from wastewater.

Batch and Packed Bed Column Study for the Removal of Cr (VI) and Ni (II) Using Agro-Industrial Wastes

The objective of this study was to prepare bio adsorbents from agro-industrial wastes from yam starch (YSR) and plantain (PSR) production for its use in the removal of Cr (VI) and Ni (II) in aqueous solution in batch and continuous packed-bed column systems. Bromatological analysis showed that the biomaterials are rich in cellulose, lignin, hemicellulose, and SEM micrographs that evidence a mesoporous structure characteristic of materials of lignocellulosic origin. FTIR evidenced functional groups such as hydroxyl, carbonyl, and methyl, possibly involved in the uptake of metal ions. EDS and FTIR analysis after adsorption confirmed that the retention of the metals on the surface of the adsorbent materials was successful. Cr (VI) and Ni (II) removal efficiencies above 80% were achieved using YSR and PSR in batch systems at the different conditions evaluated. The optimum conditions for removing Ni (II) on PSR were a bed height of 11.4 cm and a temperature of 33 °C, while for YSR, they were: 43 °C and 9 cm for temperature and bed height respectively. The variable with the most significant influence on the removal of Cr (VI) in a batch system on the two bio adsorbents was temperature. In contrast, the adsorbent dose and temperature are relevant factors for PSR Ni (II) removal. Therefore, the residues from the preparation of yam and plantain starch have high potential for removing heavy metals from wastewater and are presented as an alternative for their final disposal.