Investigation of interunit dispersion in 2D street canyons: A scaled outdoor experiment

CFD Simulations of Ventilation and Interunit Dispersion in Dormitory Complex: A Case Study of Epidemic Outbreak in Shanghai

Since the beginning of March 2022, a new round of COVID-19 outbreaks in Shanghai has led to a sharp increase in the number of infected people. It is important to identify possible pollutant transmission routes and predict potential infection risks for infectious diseases. Therefore, this study investigated the cross-diffusion of pollutants caused by natural ventilation, including external windows and indoor ventilation windows, under three wind directions in a densely populated building environment with the CFD method. In this study, CFD building models were developed based on an actual dormitory complex and surrounding buildings under realistic wind conditions to reproduce the airflow fields and transmission paths of pollutants. This paper adopted the Wells-Riley model to assess the risk of cross-infection. The biggest risk of infection was when a source room was located on the windward side, and the risk of infection in other rooms on the same side as the source room was large in the windward direction. When pollutants were released from room 8, north wind resulted in the highest concentration of pollutants in room 28, reaching 37.8%. This paper summarizes the transmission risks related to the indoor and outdoor environments of compact buildings.

Impact of Indoor-Outdoor Temperature Difference on Building Ventilation and Pollutant Dispersion within Urban Communities

Mechanical ventilation consumes a huge amount of global energy. Natural ventilation is a crucial solution for reducing energy consumption and enhancing the capacity of atmospheric self-purification. This paper evaluates the impacts of indoor-outdoor temperature differences on building ventilation and indoor-outdoor air pollutant dispersion in urban areas. The Computational Fluid Dynamics (CFD) method is employed to simulate the flow fields in the street canyon and indoor environment. Ventilation conditions of single-side ventilation mode and cross-ventilation mode are investigated. Air change rate, normalized concentration of traffic-related air pollutant (CO), intake fraction and exposure concentration are calculated to for ventilation efficiency investigation and exposure assessment. The results show that cross ventilation increases the air change rate for residential buildings under isothermal conditions. With the indoor-outdoor temperature difference, heating could increase the air change rate of the single-side ventilation mode but restrain the capability of the cross-ventilation mode in part of the floors. Heavier polluted areas appear in the upstream areas of single-side ventilation modes, and the pollutant can diffuse to middle-upper floors in cross-ventilation modes. Cross ventilation mitigates the environmental health stress for the indoor environment when indoor-outdoor temperature difference exits and the personal intake fraction is decreased by about 66% compared to the single-side ventilation. Moreover, the existence of indoor-outdoor temperature differences can clearly decrease the risk of indoor personal exposure under both two natural ventilation modes. The study numerically investigates the building ventilation and pollutant dispersion in the urban community with natural ventilation. The method and the results are helpful references for optimizing the building ventilation plan and improving indoor air quality.

Effects of tree plantings and aspect ratios on pedestrian visual and thermal comfort using scaled outdoor experiments

Urban trees ameliorate heat stress for urban dwellers. However, it is difficult to quantitatively assess the integrated impacts of tree planting and street layouts on visual and thermal comfort in simulations and urban field experiments. We conducted scaled outdoor experiments in Guangzhou to investigate the influence of tree plantings on pedestrian visual and thermal comfort in street canyons with various aspect ratios (H/W = 1, 2, 3; H = 1.2 m). We considered the effects of tree crown covers (big and small crown) and tree planting densities (ρ = 1, 0.5) on pedestrian illuminance level and two thermal comfort indices (Physiological Equivalent Temperature: PET and Index of Thermal Stress: ITS). When ρ = 1, trees in most cases reduce pedestrian illuminance (maximum 140.0klux) and improve visual comfort. Decreasing ρ from 1 to 0.5 increases the illuminance (maximum 179.5klux) in the streets with big crown trees (H/W = 1, 2) and in the street with small crown trees (H/W = 2). When ρ = 1 (H/W = 1, 2), big crown trees decrease the peak daytime PET (by about 4.0 °C) and ITS (by about 285 W). Small crown trees (ρ = 1, H/W = 1, 2) produce a warming effect on peak daytime PET (2.0-3.0 °C), but a reduction in ITS is observed when H/W = 2, 3. After reducing ρ from 1 to 0.5, big crown trees increase peak daytime thermal stress according to both indices when H/W = 1, 2. Small crown trees exhibit a similar PET cycle between ρ = 0.5 and ρ = 1 across various H/W, but their daytime reduction of ITS is less effective when ρ = 0.5 (H/W = 2). The discrepancies between PET and ITS are attributed to their different approaches to modelling radiation fluxes. The narrower the street, the lower the illuminance, PET, and ITS, while their increases caused by reduced ρ are limited in narrow streets. Our study informs some potential urban tree planting strategies and produces high-quality validation data for numerical simulations and theoretical models.

Ventilation in worker dormitories and its impact on the spread of respiratory droplets

Most of the COVID-19 cases in Singapore have primarily come from foreign worker dormitories. This people group is especially vulnerable partly because of behavioural habits, but the built environment they live in also plays a significant role. These dormitories are typically densely populated, so the living conditions are cramped. The short lease given to most dormitories also means the design does not typically focus on environmental performance, like good natural ventilation. This paper seeks to understand how these dormitories' design affects natural ventilation and, subsequently, the spread of the COVID-19 particles by looking at two existing worker dorms in Singapore. Findings show that some rooms are poorly orientated against the prevailing wind directions, so there is dominant stagnant air in these rooms, leading to respiratory droplets' long residence times. These particles can hover in the air for 10 min and more. Interventions like increased bed distance and removing upper deck beds only showed limited ventilation improvements in some rooms. Comparatively, internal wind scoops' strategic placement was more effective at directing wind towards more stagnant zones. Large canyon aspect ratios were also effective at removing particles from higher elevations.

Integrated impacts of tree planting and aspect ratios on thermal environment in street canyons by scaled outdoor experiments

Urban tree planting has the potential to reduce urban heat island intensity and building energy consumption. However, the heterogeneity of cities makes it difficult to quantitatively assess the integrated impacts of tree planting and street layouts. Scaled outdoor experiments were conducted to investigate the influence of tree plantings on wind and thermal environments in two-dimensional (2D) north-south oriented street canyons with various aspect ratios (building height/street width, AR = H/W = 1, 2, 3; H = 1.2 m). The effects of tree species with similar leaf area index (C. kotoense, big crown; C. macrocarpa, small crown), tree planting densities (ρ = 1, 0.5), and arrangements (double-row, single-row) were considered. Vegetation reduces pedestrian-level wind speed by 29%-70%. For ρ = 1 and single-row arrangement, C. kotoense (big crown) has a better shading effect and decreases wall and air temperature during the daytime by up to 9.4 °C and 1.2 °C, respectively. In contrast, C. macrocarpa (small crown) leads to a temperature increase at the pedestrian level. Moreover, C. kotoense raises the air and wall temperature of the upper urban canopy layer and increases the street albedo during the daytime because of the solar radiation reflected by trees. C. kotoense/C. macrocarpa produces the maximum daytime cooling/warming and nighttime warming of air temperature when H/W = 2 owing to its weaker convective heat transfer. When H/W = 3, the building shade dominates the shading cooling and tree cooling is less significant. When ρ = 1, double-row trees (C. kotoense) reduce wall and air temperatures by up to 10.0 °C and 1.0 °C during the daytime. However, reducing ρ from 1 to 0.5 weakens the capacity of daytime cooling by C. kotoense and the warming effect by C. macrocarpa. Our study quantifies the influence of tree planting and aspect ratios on the thermal environment, which can provide meaningful references for urban tree planting and produce high-quality validation data for numerical modeling.