Free radical scavenging activities of differently deacetylated chitosans using an ESR spectrometer

Mechanochemical conversion of chitin to high-bioactivity oligomers of N-acetyl-D-glucosamine

Organonitrogen chemicals are crucial in pharmaceutical production and material synthesis. However, the current overreliance on the energy-intensive and highly polluting Haber-Bosch synthesis process necessitates an urgent need to explore more sustainable and environmentally friendly methods for producing these chemicals. Herein, we report an effective method for the selective conversion of chitin into its oligomers in deionized water. A systematic investigation was conducted on the pretreatment of chitin using various physical methods, such as microwave, ultrasonic, and ball milling while keeping the power consumption constant. A series of techniques were used to investigate the molecular structure, surface morphology, and depolymerization degree of the pretreated chitin. Results demonstrate that ball milling is the most effective pretreatment method which achieves a significant reduction in the crystallinity and viscosity average molar mass of chitin. These changes are advantageous for the subsequent chitin selective depolymerization reactions. Ball milling chitin with solid acid Fe3O4@C-SO3H could improve the physical contact between chitin and the catalyst, leading to a substantial advancement in the subsequent selective depolymerization of chitin to its oligomers. 37.9 % yield of N-acetyl-D-glucosamine and chitin oligosaccharides with polymerization of 2-4 could be obtained from ball-milled chitin when they were depolymerized in deionized water at a low temperature of 140 °C, and the yield of desired products is 23 times greater than that obtained from untreated chitin. The products obtained exhibited notable antioxidant and antifungal activities and could be directly used as biological pesticides. This strategy enables the efficient production of high-value organonitrogen chemicals from inexpensive bioresources in an environmentally friendly way.

5-Fluorouracil-loaded green chitosan nanoparticles/ guar gum nanocomposite hydrogel in controlled drug delivery

In recent years nanotechnologies have been applied to human health with promising results, especially in the field of drug delivery. Polymeric nanoparticles (NPs) have garnered much importance in controlled drug delivery owing to their size. Chitosan (Cs) is a well-recognized biopolymer and Cs NPs have been widely explored in drug delivery. Nonetheless, reports pertaining to green synthesis of Cs NPs are scarce. Thus, in this study, green synthesis of Cs NPs was accomplished from raw mango peel extract. Spherical Cs NPs with positively charged surface of 33.4 mV was accomplished by this process. Cs NPs, in varied content, were integrated in a guar gum network matrix resulting in a nanocomposite hydrogel. The mechanical and thermal stability of the hydrogel improved upon addition of Cs NPs. The hydrogel exhibited smart swelling, good antioxidant and anti-inflammatory propensities. Cs NPs encapsulating 5-Fluorouracil demonstrated a controlled release drug profile in the colorectum and the kinetics implied the anomalous nature of drug release mechanism. The exposure of the drug-loaded nanocomposite hydrogel displayed improved anticancer effects in HT-29 colon cancer cells. Taken altogether, this study puts forth the greater efficacy of Cs NPs in controlled drug delivery for anticancer therapy.

Recovery and characterization of cellulose microfibers from fallen leaves and evaluation of their potential as reinforcement agents for production of new biodegradable packaging materials

In the present work, cellulose microfibers (CMFs) isolated from fallen autumn leaves of cherry plum (Prunus cerasifera pissardii nigra), white mulberry (Morus alba) and plane (Platanus orientalis) trees were characterized and used as reinforcement agents in sodium alginate-based biodegradable films. Fourier transform infrared spectroscopy (FT-IR) characterization showed that the CMFs were successfully isolated from the leaves with high purity. The extracted CMFs had a particle size ranging from 321.20 nm to 632.26 nm and negative zeta potential values (-27.33 to -21.40). The extraction yield of CMFs ranged from 19.53% to 26.00%. Incorporation of the leaf-derived CMFs into sodium alginate based films (1%, w:w) increased their tensile strength (from 153.73 to 187.78 MPa) and elongation at break values (from 105.97% to 89.90%) and significantly decreased oxygen (from 121.46 to 75.56 meq kg-1) and water vapor permeabilities (from 2.36 to 1.60 g mm h-1 m-2 kPa-1)(p < 0.05). Furthermore, the supplementation of CMFs into the biopolymer matrix had no significant effect on the color (L*: 85.35-85.67; a*: -0.75-0.71; b*: 4.23-4.94) and moisture content (44.64-48.42%) of the film samples, although the thickness increased (40.33-94.66 μm). Scanning electron microscopy (SEM) images showed that CMFs were homogeneously dispersed in the film matrix. Overall, this study confirms that fallen cherry plum, white mulberry, and plane leaves are valuable sources of CMFs which could be used in the manufacturing of biodegradable nanocomposite films as reinforcement agents.

Gallic Acid Based Polymers for Food Preservation: A Review

The extensive usage of nonbiodegradable plastic materials for food packaging is a major environmental concern. To address this, researchers focus on developing biocompatible and biodegradable food packaging from natural biopolymers, such as polysaccharides, proteins, and polyesters. These biopolymer-based packaging materials extend the shelf life of food due to their inherent antimicrobial and antioxidant properties. An important additive that enhances these beneficial effects is gallic acid (GA), a naturally occurring phenolic compound. GA exhibits potent antioxidant activity by scavenging free radicals and excellent antimicrobial activity against a wide range of bacteria by disrupting cell membranes. These gallic acid based active packaging solutions have demonstrated remarkable abilities to inhibit lipid oxidation, enzymatic browning, and microbial contamination and even retard the ripening processes in mushrooms, walnuts, strawberries, fresh-cut apples, bananas, fish, pork, and beef. This review focuses on the antioxidant, antibacterial, and food preservation capabilities of GA-incorporated biodegradable food packaging materials as an eco-friendly alternative to conventional plastic packaging.

Highly Compressible, Superabsorbent, and Biocompatible Hybrid Cryogel Constructs Comprising Functionalized Chitosan and St. John's Wort Extract

Biobased porous hydrogels enriched with phytocompounds-rich herbal extracts have aroused great interest in recent years, especially in healthcare. In this study, new macroporous hybrid cryogel constructs comprising thiourea-containing chitosan (CSTU) derivative and a Hypericum perforatum L. extract (HYPE), commonly known as St John's wort, were prepared by a facile one-pot ice-templating strategy. Benefiting from the strong interactions between the functional groups of the CSTU matrix and those of polyphenols in HYPE, the hybrid cryogels possess excellent liquid absorption capacity, mechanical resilience, antioxidant performance, and a broad spectrum of antibacterial activity simultaneously. Thus, owing to their design, the hybrid constructs exhibit an interconnected porous architecture with the ability to absorb over 33 and 136 times their dry weight, respectively, when contacted with a phosphate buffer solution (pH 7.4) and an acidic aqueous solution (pH 2). These cryogel constructs have extremely high compressive strengths ranging from 839 to 1045 kPa and withstand elevated strains of over 70% without developing fractures. Moreover, the water-swollen hybrid cryogels with the highest HYPE content revealed a complete and instant shape recovery after uniaxial compression. The incorporation of HYPE into CSTU cryogels enabled substantial improvement in scavenging reactive oxygen species and an expanded antibacterial spectrum toward multiple pathogens, including Gram-positive bacteria (Staphylococcus aureus and Staphylococcus epidermidis), Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa), and fungi (Candida albicans). Cell viability experiments demonstrated the cytocompatibility of the 3D cryogel constructs, which did not induce changes in the fibroblast morphology. This work showcases a simple and effective strategy to immobilize HYPE extracts on CSTU 3D networks, allowing the development of novel multifunctional platforms with promising potential in hemostasis, wound dressing, and dermal regeneration scaffolds.

Optimizing antidiabetic properties of Galega officinalis extract: Investigating the effects of foliar application of chitosan and salicylic acid

Diabetes poses a significant global health burden, demanding safe and effective therapeutic interventions. Medicinal plants offer promising avenues for natural diabetic management. Galega officinalis (goat's rue) has long been recognized for its hypoglycemic potential, but optimizing its phytochemical content and antidiabetic activity remains a key challenge. This study aimed to address this aspect by investigating the impact of foliar application of chitosan and salicylic acid on the physiological and phytochemical properties of G. officinalis, and subsequently evaluating its antidiabetic efficacy compared to that of the established drug metformin. A randomized complete block design with three replications was employed. Laboratory mice were divided into treatment groups receiving G. officinalis extract from plants sprayed with four salicylic acid concentrations (0.5-3 mM/L) and four chitosan concentrations (0-0.8 g/L). Blood glucose levels and various physiological parameters were assessed. Chitosan at 0.4 g/L and salicylic acid at 2 mM significantly enhanced the growth, photosynthetic pigments, and antioxidant activity of G. officinalis. Notably, the extract from plants treated with 3 mM salicylic acid exhibited the highest total alkaloid content, a potential contributor to antidiabetic activity. In a separate study, diabetic mice treated with this optimized G. officinalis extract (50 mg/kg) exhibited significantly greater blood glucose reductions compared to those treated with metformin (500 mg). This study demonstrates the potential of chitosan and salicylic acid in optimizing the beneficial properties of G. officinalis. The extract derived from plants treated with 3 mM salicylic acid displayed superior blood glucose-lowering efficacy compared to metformin, suggesting its promising role as a potential natural antidiabetic therapy. Further research is warranted to elucidate the specific bioactive compounds responsible for this enhanced activity and translate these findings into clinical applications.

Films based on TEMPO-oxidized chitosan nanoparticles: Obtaining and potential application as wound dressings

A series of novel films based on TEMPO-oxidized chitosan nanoparticles were prepared by casting method. Fourier transform infrared spectroscopy (FTIR) was employed to ascertain the chemical structure of TEMPO-oxidized chitosan. The surface morphology of the TEMPO-oxidized chitosan nanoparticles was analyzed by atomic force microscopy (AFM). The physicochemical (area density, thickness, iodine sorption, roughness), functional (moisture sorption, liquid absorption capacity, weight loss upon contact with the liquid, and water vapor transmission rate), antibacterial, and antioxidant properties of films based on TEMPO-oxidized chitosan nanoparticles were also investigated. The physicochemical properties of the films varied widely: area density ranged from 77.83 ± 0.06 to184.46 ± 0.05 mg/cm2, thickness varied between 80.5 ± 1.6 and 200.5 ± 1.6 μm, iodine sorption spanned from 333.7 ± 2.1 to166.4 ± 2.2 mg I2/g, and roughness ranged from 4.1 ± 0.2 to 5.6 ± 0.3 nm. Similarly, the functional properties also varied significantly: moisture sorption ranged from 4.76 ± 0.03 to 9.62 ± 0.11 %, liquid absorption capacity was between 129.04 ± 0.24 and 159.33 ± 0.73 % after 24 h, weight loss upon contact with the liquid varied between 31.06 ± 0.35 and 45.88 ± 0.58 % after 24 h and water vapor transmission rate ranged from 1220.10 ± 2.91to1407.77 ± 5.22 g/m2 day. Despite the wide variations in physicochemical and functional properties, all films showed maximum bacterial reduction of Staphylococcus aureus and Escherichia coli, although they exhibited low antioxidant activity. The results suggest that the films could be effectively utilized as antibacterial wound dressings.

Wearable, Machine Washable, Breathable Polyethylenimine/Sodium Alginate Layer-by-Layer-Coated Cotton-Based Multifunctional Triboelectric Nanogenerators

Cotton-based textiles are ubiquitous in daily life and are prime candidates for application in wearable triboelectric nanogenerators. However, pristine cotton is vulnerable to bacterial attack, lacks antioxidant and ultraviolet (UV)-protective abilities, and shows lower triboelectric charge generation against tribonegative materials because it is present in the neutral region of the triboelectric series. To overcome such drawbacks, herein, a facile layer-by-layer method is proposed, involving the deposition of alternate layers of polyethylenimine (PEI) and sodium alginate (SA) on cotton. Such modified fabric remains breathable and flexible, retains its comfort properties, and simultaneously shows multifunctionalities and improved triboelectric output, which are retained even after 50 home laundering cycles. Also, the modified fabric becomes more tribopositive than nylon, silk, and wool. A triboelectric nanogenerator consisting of modified cotton and polyester fabric is proposed that shows a maximum power density of 338 mW/m2. An open-circuit voltage of ∼97.3 V and a short-circuit current of ∼4.59 μA are obtained under 20 N force and 1 Hz tapping frequency. Further, the modified cotton exhibits excellent antibacterial, antioxidant, and UV-protective properties because of the incorporation of PEI, and its moisture management properties are retained due to the presence of sodium alginate in the layer. This study provides a simple yet effective approach to obtaining durable multifunctionalities and improved triboelectric performance in cotton substrates.

Ecotoxicological evaluation of chitosan biopolymer films particles in adult zebrafish (Danio rerio): A comparative study with polystyrene microplastics

To mitigate the environmental impact of microplastics (MPs), the scientific community has innovated sustainable and biodegradable polymers as viable alternatives to traditional plastics. Chitosan, the deacetylated form of chitin, stands as one of the most thoroughly investigated biopolymers and has garnered significant interest due to its versatile applications in both medical and cosmetic fields. Nevertheless, there is still a knowledge gap regarding the impact that chitosan biopolymer films (CBPF) may generate in aquatic organisms. In light of the foregoing, this study aimed to assess and compare the potential effects of CBPF on the gastrointestinal tract, gills, brain, and liver of Danio rerio against those induced by MPs. The findings revealed that both CBPF and MPs induced changes in the levels of oxidative stress biomarkers across all organs. However, it is essential to note that our star plots illustrate a tendency for CBPF to activate antioxidant enzymes and for MPs to produce oxidative damage. Regarding gene expression, our findings indicate that MPs led to an up-regulation in the expression of genes associated with apoptotic response (p53, casp3, cas9, bax, and bcl2) in all fish organs. Meanwhile, CBPF produced the same effect in genes related to antioxidant response (nrf1 and nrf2). Overall, our histological observations substantiated these effects, revealing the presence of plastic particles and tissue alterations in the gills and gastrointestinal tract of fish subjected to MPs. From these results, it can be concluded that CBPF does not represent a risk to fish after long exposure.

A comprehensive characterization of Hermetia illucens derived chitosan produced through homogeneous deacetylation

The increasing demand for chitin and chitosan is driving research to explore alternative sources to crustaceans. Insects, particularly bioconverters as Hermetia illucens, are promising substitutes as they process food industry waste into valuable molecules, including chitin. Chitosan can be produced by chitin deacetylation: hot deacetylation to obtain a heterogeneous chitosan, the commonly produced, and cold deacetylation to obtain a homogeneous chitosan, not widely available. The two different treatments lead to a different arrangement of the amine and acetyl groups in the chitosan structure, affecting its molecular weight, deacetylation degree, and biological activity. This is the first report on the production and chemical-physical and biological characterization of homogenous chitosan derived from H. illucens larvae, pupal exuviae, and adults. This work, in addition to the report on heterogeneous chitosan by our research group, completes the overview of H. illucens chitosan. The yield values obtained for homogeneous chitosan from pupal exuviae (3 and 7 %) are in the range of insect (2-8 %) and crustaceans (4-15 %) chitosan. The evaluation of the antioxidant activity and antimicrobial properties against Gram-negative (Escherichia coli) and Gram-positive (Micrococcus flavus) bacteria confirmed the great versatility of H. illucens chitosan for biomedical and industrial applications and its suitability as an alternative source to crustaceans.

Effect of Chitosan and Its Water-Soluble Derivatives on Antioxidant Activity

The antioxidant activity of chitosan (CS) and three water-soluble derivatives was analyzed comparatively by in vitro and in vivo experiments, including hydroxypropyl chitosan (HPCS), quaternary ammonium salt of chitosan (HACC), and carboxymethyl chitosan (CMCS). The results show that chitosan and its water-soluble derivatives have a scavenging ability on DPPH radicals, superoxide radicals, and hydroxyl radicals, and a reducing ability. A remarkable difference (p < 0.05) was found for HACC and HPCS compared with CS on DPPH radicals, hydroxyl radicals, and reducing ability. The antioxidant ability of the four chitosan samples was in the order of HPCS > HACC > CMCS > CS. Furthermore, antioxidant activity of all samples increased gradually in a concentration-dependent manner. The in vivo result indicates that oral CS and its derivatives samples result in a decrease in lipid peroxides (LPO) and free fatty acids (FFA) levels in serum with an increase in superoxide dismutase (SOD) activity. Especially for the HPCS and HACC groups, the LPO, FFA, and SOD activity in serum was different significantly in comparison with the high-fat controlgroup (HF) (p < 0.05). These results indicate that chitosan and its derivatives can be used as good antioxidants, and the antioxidant activity might be related to the molecular structure of chitosan derivatives.

Novel applications of black pepper essential oil as an antioxidant agent in sodium caseinate and chitosan based active edible films

In the current study, sodium caseinate and chitosan-based composite edible films were developed with the incorporation of black pepper (Piper nigrum) essential oil (BPO) in various concentrations (0.05, 0.1 and 0.15 %) for potential food packaging applications. The chemical composition of BPO was determined using GCMS and the major compound detected were β-caryophyllene, limonene, β-phellandren, pinene, copaene and α-humulene. The addition of BPO resulted in an increase in the thickness, EAB, WVP, moisture content and swelling index values of the films; however, the TS and water solubility decreased. The inclusion of BPO led to a substantial enhancement in the DPPH and ABTS radical scavenging capabilities of the edible films. SEM micrographs demonstrated intermolecular interaction between BPO, sodium caseinate, and chitosan. FTIR spectra confirmed the interaction of the functional groups of the polymers and BPO. The incorporation of the BPO increased the crystallinity of the films. Moreover, the thermal analysis including TGA, DSC and DTG demonstrated an increase in the thermal stability of the edible films with the addition of the BPO. These findings demonstrated that sodium caseinate and chitosan composite based edible films loaded with BPO can be used as sustainable active food packaging material.

PdPtB Electrochemiluminescence Nanoenhancer and SiC@Au-PEDOT Nanowires-Based Detection of β-Amyloid Oligomers in Alzheimer's Disease

β-Amyloid oligomers (AβOs) are promising biomarkers for the diagnosis of Alzheimer's disease (AD). The present research introduces a novel electrochemiluminescence (ECL) immunosensor based on PdPtB nanoenhancer and SiC@Au-PEDOT nanowires (NWs) for the specific and ultrasensitive detection of AβOs. The PdPtB nanoenhancer exhibited excellent oxidase-like catalytic activity with in situ generation of reactive oxygen species (ROS) to enhance luminol ECL in neutral media. In addition, SiC@Au-PEDOT NWs were utilized as a biocompatible and conductive substrate for the modification of the glassy carbon electrode (GCE). With this design, the ECL immunosensor showed outstanding AβOs analytical performance without exogenous coreactant. The ECL immunosensor demonstrated a favorable linear range of 20 pM to 20 nM and a detection limit of 10 pM under optimized conditions with potential straightforward clinical application. In general, the developed ECL immunosensor provides a promising strategy for the early diagnosis of AD.

The antioxidant activity of polysaccharides: A structure-function relationship overview

Over the last years, polysaccharides have been linked to antioxidant effects using both in vitro chemical and biological models. The reported structures, claimed to act as antioxidants, comprise chitosan, pectic polysaccharides, glucans, mannoproteins, alginates, fucoidans, and many others of all type of biological sources. The structural features linked to the antioxidant action include the polysaccharide charge, molecular weight, and the occurrence of non-carbohydrate substituents. The establishment of structure/function relationships can be, however, biased by secondary phenomena that tailor polysaccharides behavior in antioxidant systems. In this sense, this review confronts some basic concepts of polysaccharides chemistry with the current claim of carbohydrates as antioxidants. It critically discusses how the fine structure and properties of polysaccharides can define polysaccharides as antioxidants. Polysaccharides antioxidant action is highly dependent on their solubility, sugar ring structure, molecular weight, occurrence of positive or negatively charged groups, protein moieties and covalently linked phenolic compounds. However, the occurrence of phenolic compounds and protein as contaminants leads to misleading results in methodologies often used for screening and characterization purposes, as well as in vivo models. Despite falling in the concept of antioxidants, the role of polysaccharides must be well defined according with the matrices where they are involved.

Ethanol organosolv lignin as a substitute for commercial antioxidants, focusing on the structural properties and synergistic effect with myricetin

Lignin has potential as a substitute for natural antioxidants in cosmetics and food industries due to its radical scavenging ability and price competitiveness. The antioxidant activity of lignin depends on its structural properties, and they accordingly have synergy with natural antioxidants. Based on the structural characteristics, the antioxidant activity of ethanol organosolv lignin (EOL) and synergy with myricetin were investigated. The phenolic-OH content was a predominant factor in the antioxidant activity of EOL, and EOL-H with a higher phenolic-OH content and lower IC₅₀ value (0.17 mg/mL) covered a wide synergy range of 1:32-2:1 (EOL:myricetin). The synergistic effect was verified by comparing predicted and actual values based on ESR analysis, and the phenolic-OH ratio (>0.4) of myricetin and EOL for the synergy was suggested. In this respect, the results highlight the potential of lignin with high phenolic-OH content as a substitute for commercial antioxidants with superior activity and broad synergy ranges.

Development and characterization of a novel sodium alginate based active film supplemented with Lactiplantibacillus plantarum postbiotic

In this study, sodium alginate based biodegradable films were prepared by the supplementation with postbiotics of Lactiplantibacillus plantarum subsp. plantarum (L. plantarum) W2 strain and the effect of probiotics (probiotic-SA film) and postbiotics (postbiotic-SA film) incorporation on physical, mechanical (tensile strength and elongation at break), barrier (oxygen and water vapor permeability), thermal and antimicrobial properties of the films were investigated. The pH, titratable acidity and brix of the postbiotic was 4.02, 1.24 % and 8.37, respectively while gallic acid, protocatechuic acid, myricetin and catechin were the major phenolic compounds. Mechanical and barrier properties of the alginate-based films were improved by probiotic or postbiotic supplementation while postbiotic showed a more pronounced (P < 0.05) effect. Thermal analysis showed that postbiotics supplementation increased thermal stability of the films. In FTIR spectra, the absorption peaks at 2341 and 2317 cm^-1 for probiotic-SA and postbiotic-SA edible films confirmed the incorporation of probiotics/postbiotics of L. plantarum W2 strain. Postbiotic supplemented films showed strong antibacterial activity against gram-positive (L. monocytogenes, S. aureus and B. cereus) and one gram-negative bacterial strain (E. coli O157:H7) while probiotic incorporation did not add an antibacterial effect to the films. SEM images revealed that the supplementation of postbiotics provided a rougher and rigid film surface. Overall, this paper brought a new perspective for development of novel active biodegradable films by incorporation of postbiotics with improved performance.

Fabrication of chitosan-MnO2‑iridium/nanoceria supported nanoparticles: Catalytic and anti-radical activities

Chitosan capped MnO₂‑iridium nanoparticles supported on nanoceria (Ch-MnO₂-Ir/CeO₂) were fabricated by using combination of colloidal solution and metal displacement galvanic methods. The oxidative degradation of acid orange 7 in aqueous solution by activated persulfate with the as-prepared nanoparticles was studied. The resulting Ch-MnO₂-Ir/CeO₂ with S₂O₈^2-, 80 % degraded 70.06 mg/L of acid orange 7 within 100 min, while at the same time, Ch-Ir, Ch-MnO₂, and Ch-Ir-MnO₂ remained inactive. CeO₂ increased the surface of the catalyst, and also improved the reactive oxygen species site of Ch-Ir-MnO₂ through the activation of S₂O₈^2- with CeO₂. The reversible redox cycle reaction, Ce (III) ↔ Ce (IV) and strong synergistic effect of MnO₂-Ir are responsible for the remarkable catalytic performance of Ch-MnO₂-Ir/CeO₂/S₂O₈^2- system. The degradation of acid orange 7 could be significantly retarded with inorganic (NO₃^- < Cl^- < SO₄^2- < H₂PO₄^- < HCO₃^-) and organic scavengers (ethanol < tertiary butanol < benzoquinone < phenol). Ch-MnO₂-Ir/CeO₂ exhibited excellent stability and reusability. Anti-radical activity of chitosan and Ch-MnO₂-Ir/CeO₂ was evaluated with 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical. The free radical properties increase with concentration of chitosan and Ch-MnO₂-Ir/CeO₂.

Multi-crosslinked network chitosan films containing caffeic acid and Fe3+ with high anti-oxidation and anti-UV abilities

In this study, caffeic acid (CA) and Fe³⁺ were added to chitosan solution to prepare chitosan/caffeic acid/Fe³⁺ (CCAF) composite films. CA was used to introduce covalent bonds and hydrogen bonds. Fe³⁺ was used to introduce metal coordination bonds which combined with hydrogen bond and covalent bonds to form a multi-crosslinked system to enhance the tensile strength (TS), improve the antioxidant properties and UV resistance performance. The results showed that the TS of chitosan/caffeic acid (CCA) film with the addition of 0.3 mmol CA was increased by 36.6 % compared with pure chitosan film. The TS of the CCAF film increased from 42.6 MPa to 73.9 MPa with an increase of 73.5 %. The free radical scavenging rate of CCA film and CCAF film, in comparison to pure chitosan film, were improved by 155.7 % and 148.24 %, respectively. The UV resistance property of the CCAF solution was tested at 365 nm and the results showed that the UV barrier rate reached 99.99 %. The water vapor transmission (WVT) and water vapor permeability (WVP) of CCAF film both showed a 25.71 % reduction compared to that of the chitosan film. Besides, the composite film also showed excellent antibacterial properties, which provided the possibility for more applications.

Chitosan-Polyphenol Conjugates for Human Health

Human health deteriorates due to the generation and accumulation of free radicals that induce oxidative stress, damaging proteins, lipids, and nucleic acids; this has become the leading cause of many deadly diseases such as cardiovascular, cancer, neurodegenerative, diabetes, and inflammation. Naturally occurring polyphenols have tremendous therapeutic potential, but their short biological half-life and rapid metabolism limit their use. Recent advancements in polymer science have provided numerous varieties of natural and synthetic polymers. Chitosan is widely used due to its biomimetic properties which include biodegradability, biocompatibility, inherent antimicrobial activity, and antioxidant properties. However, due to low solubility in water and the non-availability of the H-atom donor, the practical use of chitosan as an antioxidant is limited. Therefore, chitosan has been conjugated with polyphenols to overcome the limitations of both chitosan and polyphenol, along with increasing the potential synergistic effects of their combination for therapeutic applications. Though many methods have been evolved to conjugate chitosan with polyphenol through activated ester-modification, enzyme-mediated, and free radical induced are the most widely used strategies. The therapeutic efficiency of chitosan-polyphenol conjugates has been investigated for various disease treatments caused by ROS that have shown favorable outcomes and tremendous results. Hence, the present review focuses on the recent advancement of different strategies of chitosan-polyphenol conjugate formation with their advantages and limitations. Furthermore, the therapeutic applicability of the combinatorial efficiency of chitosan-based conjugates formed using Gallic Acid, Curcumin, Catechin, and Quercetin in human health has been described in detail.

Evaluation of Angiogenesis in an Acellular Porous Biomaterial Based on Polyhydroxybutyrate and Chitosan Using the Chicken Ex Ovo Chorioallantoic Membrane Model

Simple Summary

The chorioallantoic membrane (CAM) is an avian extraembryonic membrane widely used as an experimental assay to study angiogenesis and its inhibition in response to tissues, cells, or soluble factors. In recent years, the CAM has become popular in scientific studies focused on the use of its potential for the study of biocompatibility of materials for regenerative strategies and tissue engineering applications. Great research efforts are being made to develop innovative biomaterials able to treat hard tissue defects, including diseases such as a bone cancer. In this article, we describe an approach to detect the formation of blood vessels inside the porous acellular biopolymer polyhydroxybutyrate/chitosan (PHB/CHIT) scaffold using the CAM assay as an in vivo alternative animal model, including macroscopic, histological, immunohistochemical, and molecular evaluation of the biocompatibility.

Abstract

The chorioallantoic membrane (CAM) is a highly vascularized avian extraembryonic membrane widely used as an in vivo model to study angiogenesis and its inhibition in response to tissues, cells, or soluble factors. In recent years, the use of CAM has become an integral part of the biocompatibility testing process for developing biomaterials intended for regenerative strategies and tissue engineering applications. In this study, we used the chicken ex ovo CAM assay to investigate the angiogenic potential of innovative acellular biopolymer polyhydroxybutyrate/chitosan (PHB/CHIT) scaffold, which is intended for the treatment of hard tissue defects, depending on treatment with pro- and anti-angiogenic substances. On embryonic day (ED) 7, the experimental biomaterials were placed on the CAM alone or soaked in vascular endothelial growth factor (VEGF-A), saline solution (PHY), or tyrosine kinase inhibitor (SU5402). After 72 h, the formation of vessels was analyzed in the surrounding area of the scaffold and inside the pores of the implants, using markers of embryonic endothelium (WGA, SNA), myofibroblasts (α-SMA), and macrophages (KUL-01). The morphological and histochemical analysis showed strong angiogenic potential of untreated scaffolds without additional effect of the angiogenic factor, VEGF-A. The lowest angiogenic potential was observed in scaffolds soaked with SU5402. Gene expression of pro-angiogenic growth factors, i.e., VEGF-A, ANG-2, and VE-CAD, was upregulated in untreated scaffolds after 72 h, indicating a pro-angiogenic environment. We concluded that the PHB/CHIT has a strong endogenous angiogenic potential and could be promising biomaterial for the treatment of hard tissue defects.

Preparation and Characterization of High Mechanical Strength Chitosan/Oxidized Tannic Acid Composite Film with Schiff Base and Hydrogen Bond Crosslinking

Chitosan-based composite films with good biodegradability, biocompatibility, and sustainability are extensively employed in the field of food packaging. In this study, novel chitosan/tannic acid (CTA) and chitosan/oxidized tannic acid (COTA) composite films with excellent mechanical and antibacterial properties were prepared using a tape casting method. The results showed that, when 20% tannic acid (TA) was added, the tensile strength of the CTA composite film was 80.7 MPa, which was 89.4% higher than that of the pure chitosan (CS) film. TA was oxidized to oxidized tannic acid (OTA) with laccase, and the phenolic hydroxyl groups were oxidized to an o-quinone structure. With the addition of OTA, a Schiff base reaction between the OTA and CS occurred, and a dual network structure consisting of a chemical bond and hydrogen bond was constructed, which further improved the mechanical properties. The tensile strength of 3% COTA composite film was increased by 97.2% compared to that of pure CS film. Furthermore, these CTA films with significant antibacterial effects against Escherichia coli (E. coli) are likely to find uses in food packaging applications.

New Zinc-Based Active Chitosan Films: Physicochemical Characterization, Antioxidant, and Antimicrobial Properties

The improvement of the antioxidant and antimicrobial activities of chitosan (CS) films can be realized by incorporating transition metal complexes as active components. In this context, bioactive films were prepared by embedding a newly synthesized acylpyrazolonate Zn(II) complex, [Zn(Q^PhtBu)₂(MeOH)₂], into the eco-friendly biopolymer CS matrix. Homogeneous, amorphous, flexible, and transparent CS@Zn_n films were obtained through the solvent casting method in dilute acidic solution, using different weight ratios of the Zn(II) complex to CS and characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR), Raman, and scanning electron microscopy (SEM) techniques. The X-ray single-crystal analysis of [Zn(Q^PhtBu)₂(MeOH)₂] and the evaluation of its intermolecular interactions with a protonated glucosamine fragment through hydrogen bond propensity (HBP) calculations are reported. The effects of the different contents of the [Zn(Q^PhtBu)₂(MeOH)₂] complex on the CS biological proprieties have been evaluated, proving that the new CS@Zn_n films show an improved antioxidant activity, tested according to the DPPH method, with respect to pure CS, related to the concentration of the incorporated Zn(II) complex. Finally, the CS@Zn_n films were tried out as antimicrobial agents, showing an increase in antimicrobial activity against Gram-positive bacteria (Staphylococcus aureus) with respect to pure CS, when detected by the agar disk-diffusion method.

Application of chitosan nanoparticles in skin wound healing

The rising prevalence of impaired wound healing and the consequential healthcare burdens have gained increased attention over recent years. This has prompted research into the development of novel wound dressings with augmented wound healing functions. Nanoparticle (NP)-based delivery systems have become attractive candidates in constructing such wound dressings due to their various favourable attributes. The non-toxicity, biocompatibility and bioactivity of chitosan (CS)-based NPs make them ideal candidates for wound applications. This review focusses on the application of CS-based NP systems for use in wound treatment. An overview of the wound healing process was presented, followed by discussion on the properties and suitability of CS and its NPs in wound healing. The wound healing mechanisms exerted by CS-based NPs were then critically analysed and discussed in sections, namely haemostasis, infection prevention, inflammatory response, oxidative stress, angiogenesis, collagen deposition, and wound closure time. The results of the studies were thoroughly reviewed, and contradicting findings were identified and discussed. Based on the literature, the gap in research and future prospects in this research area were identified and highlighted. Current evidence shows that CS-based NPs possess superior wound healing effects either used on their own, or as drug delivery vehicles to encapsulate wound healing agents. It is concluded that great opportunities and potentials exist surrounding the use of CSNPs in wound healing.

Full-fat field cricket (Gryllus bimaculatus) as a substitute for fish meal and soybean meal for weaning piglets: effects on growth performance, intestinal health, and redox status

Full-fat field cricket meal (FCP) is an alternative protein ingredient in livestock production; however, the effects of replacing conventional protein sources with FCP in nursery diets have not been determined. In this study, the effects of the partial replacement of either fish meal or soybean meal with FCP on weaning pigs were evaluated, including the analyses of growth performance, nutrient utilization, intestinal morphology, 
immunity, oxidative stress, and fecal microbial counts. A total of 100 crossbred weaning pigs [(Landrace × Large White) × Duroc] were allotted to one of the following five treatments with five replicates (four pigs/pen) and fed for 28 d postweaning. Treatments were 1) a corn-soybean meal (SBM)-based diet with 5% fish meal (Positive control; PC), 2) a corn-SBM-based diet without fish meal (Negative control; NC), 3) field crickets replacing fishmeal on a total Lys basis (FCP1), 4) field crickets replacing fishmeal on a kg/kg basis (FCP2), and 5) field crickets replacing fish meal and soybean meal (FCP3). The piglets on FCP1 had a higher body weight on days 14 and 28, and an increased average daily gain over the experimental period than NC (P < 0.05); FCP2 and FCP3 were similar to the FCP1 treatment. The incidence of diarrhea was lower under an FCP-supplemented diet than under the NC diet throughout the study (P < 0.05). Pigs fed FCP1 and FCP2 had a higher digestibility of crude 
protein (P = 0.041), and all FCP groups increased crude fat digestibility (P = 0.024). FCP1 and FCP2 also increased jejunal villus height 
(P = 0.009), whereas the increase in jejunal villus-to-crypt ratios (P = 0.019) was greater in pigs fed the FCP2 diet than those fed the NC diet. Furthermore, FCP2 supplementation increased serum immunoglobulin A levels on days 14 and 28, including reduced serum interleukin-6 and tumor necrosis factor alpha levels (P < 0.05). Pigs fed an FCP2 diet had reduced malondialdehyde levels than those fed a PC diet, while pigs fed an FCP2 diet had higher superoxide dismutase and glutathione peroxidase levels, and more fecal Lactobacillus spp. than those fed an NC diet (P < 0.05). These results support the use of FCP as an alternative protein ingredient with beneficial effects on growth performance, intestinal morphology, antioxidant capacity, and intestinal microbiota. In particular, FCP can be used as a partial substitute for fish meal and soybean meal without detrimental effects on weaning pigs.

Impact of Chitosan on the Mechanical Stability of Soils

Chitosan is becoming increasingly applied in agriculture, mostly as a powder, however little is known about its effect on soil mechanical properties. Uniaxial compression test was performed for cylindrical soil aggregates prepared from four soils of various properties (very acidic Podzol, acidic Arenosol, neutral Fluvisol and alkaline Umbrisol) containing different proportions of two kinds of chitosan (CS1 of higher molecular mass and lower deacetylation degree, and CS2 of lower molecular mass and higher deacetylation degree), pretreated with 1 and 10 wetting–drying cycles. In most cases increasing chitosan rates successively decreased the mechanical stability of soils that was accompanied by a tendential increase in soil porosity. In one case (Fluvisol treated with CS2) the porosity decreased and mechanical stability increased with increasing chitosan dose. The behavior of acidic soils (Podzol and Arenosol) treated with CS2, differed from the other soils: after an initial decrease, the strength of aggregates increased with increasing chitosan amendment, despite the porosity consequently decreasing. After 10 wetting–drying cycles, the strength of the aggregates of acidic soils appeared to increase while it decreased for neutral and alkaline soils. Possible mechanisms of soil–chitosan interactions affecting mechanical strength are discussed and linked with soil water stability and wettability.

Chitooligosaccharides production from shrimp chaff in chitosanase cell surface display system

Chitin refers to a natural biopolymer, which is economically significant to next-generation biorefineries. In this study, a novel high-yield method with cell surface-display chitosanase (CHI-1) was built to produce chitooligosaccharides (COS) from shrimp chaff through the co-fermentation in the presence of Bacillus subtilis and Acetobacter sp. Under the optimized co-fermentation conditions (5 g/L yeast extracts, 10 g/L KH₂PO₄, 6% ethanol, 50 g/L glucose), the final deproteinization (DP) and demineralization (DM) efficiency and the chitin yield were achieved as 94, 92 and 18%, respectively. The engineered E. coli BL21-pET23b(+)-NICHI maintained 81% of the initial enzyme activity after 40 days at room temperature. The crude CHI-1 was inactivated after one-day interacting with prepared chitosan. Moreover, E. coli BL21-pET23b(+)-NICHI still maintained excellent hydrolysis ability in 7 days, and the COS yield reached 41%. Accordingly, the proposed method exhibited excellent stability and a high hydrolysis efficiency to produce COS with whole engineered cells.

Adsorption properties of heavy metals and antibiotics by chitosan from larvae and adult Trypoxylus dichotomus

Chitosan was prepared by hydrothermal deacetylation from multi-step protein purification chitin based on Trypoxylus dichotomus, for treating heavy metals and antibiotics. Chitosan with higher deacetylation degree and lower molecular weight were synthesized. The adult chitosan was composed of nanofibers arranged more evenly, showing higher yield, thermal stabilities and antimicrobial properties. The adsorption capacities of Cu²⁺ and Fe³⁺ were 462 and 270 mg/g, lower than 934 mg/g of Pb²⁺. Levofloxacin and tetracycline hydrochloride adsorption capacity were 26 and 22 mg/g, lower than 67 mg/g of sulfamethoxazole. In addition, compared with single pollutants, the adsorption of sulfamethoxazole and Pb²⁺ can increase by 6% and 5% when they act as composite contaminants. The adsorption procedure can be well described by pseudo-second-order kinetics and Langmuir isothermal model, indicating it a homogeneous monolayer chemisorption. Therefore, the Trypoxylus dichotomus source chitosan prepared by hydrothermal deacetylation has potential applications in the adsorption of complex pollutants.

Hepatoprotective Effects of Chitosan and Chitosan Nanoparticles against Biochemical, Genetic, and Histological Disorders Induced by the Toxicity of Emamectin Benzoate

Background

Emamectin benzoate (EMB) is a biopesticide which used in agriculture as an insecticide. It is easier to reach ecologically and affects human health. This study aims to evaluate the protective effect of chitosan and chitosan nanoparticles against EMB-induced hepatotoxicity.

Methods

Male mice were distributed into four groups: G1: the negative control, G2: EMB group (5 mg/kg diet), G3: EMB with Chitosan, (600 mg/kg diet), and G4: EMB with Chitosan nanoparticles (600 mg/kg diet). The experiment continues for 8 weeks, and the animals were sacrificed, and their organs were removed and immediately weighed after sacrifice. The liver was quickly removed and processed for histopathological and genetic studies.

Results

Emamectin benzoate (EMB) treatment induced oxidative stress by increased levels of Malondialdehyde (MDA), alanine aminotransferase (ALT) and aspartate aminotransferase (AST) with inhibition of acetylcholinesterase (AChE), Superoxide dismutase (SOD) and Catalase (CAT) levels. EMB produced several histopathological changes in the liver. Relative expressions of studied genes elevated in the liver with increase in DNA damage. Co-treatment with chitosan and chitosan nanoparticles reduced EMB related liver toxicity that belong to biochemical, histopathological, gene expression, and DNA damage by increasing antioxidant capacity.

Conclusion

This study offers insight into the potential for Chitosan and chitosan nanoparticles as a novel natural material against the oxidative stress induced by EMB.

Functionality of Films from Nigella sativa Defatted Seed Cake Proteins Plasticized with Grape Juice: Use in Wrapping Sweet Cherries

The main aim of this work is to improve the functionality of Nigella sativa protein concentrate (NSPC) films by using grape juice (GJ). The film’s mechanical, antioxidant, and antimicrobial activities were evaluated. The obtained results showed, for the first time, that GJ at concentrations of 2%–10% (v/v) are able to act as plasticizer for the NSPC films with promising film properties. The results showed that the tensile strength and Young’s modulus of NSPC films were reduced significantly when the GJ increased. However, the NSPC films prepared with 6% GJ observed a higher elongation at break compared with other films. Moreover, the obtained films showed very interesting and promising results for their antioxidant and antimicrobial properties compared with the control films. The sweet cherries wrapped with NSPC film showed that the TSS (Brix) was significantly lower compared to the control, after 10 days of storage. However, the titratable acidity, pH value, and L* of all cherries, either wrapped or not, was not significantly different in all storage times. On the other hand, hue angle was significantly lower after 10 days of storage at −18 °C compared with control films. GJ has a multi-functional effect for protein-based films as plasticizer, antioxidant, and antimicrobial function.

Non-clinical assessment of lubrication and free radical scavenging of an innovative non-animal carboxymethyl chitosan biomaterial for viscosupplementation: An in-vitro and ex-vivo study

OBJECTIVE

Lubrication and free radical scavenging are key features of biomaterials used for viscosupplementation (VS) of joints affected by osteoarthritis (OA). The objective of this study was to describe the non-clinical performance characterization of KiOmedine® CM-Chitosan, a non-animal carboxymethyl chitosan, in order to assess its intended action in VS and to compare it to existing viscosupplements based on crosslinked hyaluronan (HA) formulations.

METHOD

The lubrication capacity of the tested viscosupplements (VS) was evaluated in-vitro and ex-vivo. In-vitro, the coefficient of friction (COF) was measured using a novel tribological system. Meanwhile, an ex-vivo biomechanical model in ovine hindlimbs was developed to assess the recovery of join mobility after an intra-articular (IA) injection. Free radical scavenging capacity of HA and KiOmedine® CM-Chitosan formulations was evaluated using the Trolox Equivalent Antioxidant Capacity (TEAC) assay.

RESULTS

In the in-vitro tribological model, KiOmedine® CM-Chitosan showed high lubrication capacity with a significant COF reduction than crosslinked HA formulations. In the ex-vivo model, the lubrication effect of KiOmedine® CM-Chitosan following an IA injection in the injured knee was proven again by a COF reduction. The recovery of joint motion was optimal with an IA injection of 3 ml of KiOmedine® CM-Chitosan, which was significantly better than the crosslinked HA formulation at the same volume. In the in-vitro TEAC assay, KiOmedine® CM-Chitosan showed a significantly higher free radical scavenging capacity than HA formulations.

CONCLUSION

Overall, the results provide a first insight into the mechanism of action in terms of lubrication and free radical scavenging for the use of KiOmedine® CM-Chitosan as a VS treatment of OA. KiOmedine® CM-Chitosan demonstrated a higher capacity to scavenge free radicals, and it showed a higher recovery of mobility after a knee lesion than crosslinked HA formulations. This difference could be explained by the difference in chemical structure between KiOmedine® CM-Chitosan and HA and their formulations.

Active Edible Films Fortified with Natural Extracts: Case Study with Fresh-Cut Apple Pieces

The main aim of the study was to prepare the edible films based on carrageenan/chitosan and incorporate them into the following matrices: the natural extracts of Clitoria ternatea, Brassica oleracea, and Ipomea batatas. The films were characterized by TPC (total polyphenols content), antioxidant activity, and textural properties. Experimentally produced films were added in the packaging of freshly cut apple pieces, and the apple pieces were dipped into the films produced from carrageenan and chitosan. The appearance of the samples was monitored, as were antioxidant activity and total polyphenol content. The intelligent properties of films were evaluated too. The polymer type used for the preparation had the highest impact on the prepared films, and CH_LCZ (red cabbage extract-Brassica oleracea) featured the best antioxidant activity. The intelligent properties were slightly confirmed in samples with the addition of red cabbage. The main finding was that the coating of fresh-cut apples emphasized the possibility to use a carrageenan matrix with the addition of extracts. The samples immersed in this coating type showed higher antioxidant activity as well as a superior color when compared to that of chitosan coated apple samples.

Preparation and Characterization of Functional Films Based on Chitosan and Corn Starch Incorporated Tea Polyphenols

The functional films based on chitosan and corn starch incorporated tea polyphenols were developed through mixing the chitosan and starch solution and the powder of tea polyphenols by the casting method. The objective of this research was to investigate the effect of different concentrations of tea polyphenols on the functional properties of the films. Attenuated total reflectance Fourier transform infrared spectrometry and X-ray diffraction were used to investigate the potential interactions among chitosan, corn starch and tea polyphenols in the blend films. Physical properties of the blend films, including density, moisture content, opacity, color, water solubility and water swelling, as well as morphological characteristics, were measured. The results demonstrated that the incorporation of tea polyphenols caused the blend films to lead to a darker appearance. The water solubility of the blend film increased with the increase of tea polyphenol concentrations, while moisture content and swelling degree decreased. The hydrogen bonding between chitosan, starch and tea polyphenols restricted the movement of molecular chains and was helpful to the stability of the blend films. The results suggested that these biodegradable blend films could potentially be used as packaging films for the food and drug industries to extend the shelf life to maintain their quality and safety.

Preparation and Antioxidant Activity of Chitosan Dimers with Different Sequences

As a popular marine saccharide, chitooligosaccharides (COS) has been proven to have good antioxidant activity. Its antioxidant effect is closely related to its degree of polymerization, degree of acetylation and sequence. However, the specific structure-activity relationship remains unclear. In this study, three chitosan dimers with different sequences were obtained by the separation and enzymatic method, and the antioxidant activity of all four chitosan dimers were studied. The effect of COS sequence on its antioxidant activity was revealed for the first time. The amino group at the reducing end plays a vital role in scavenging superoxide radicals and in the reducing power of the chitosan dimer. At the same time, we found that the fully deacetylated chitosan dimer DD showed the strongest DPPH scavenging activity. When the amino groups of the chitosan dimer were acetylated, it showed better activity in scavenging hydroxyl radicals. Research on COS sequences opens up a new path for the study of COS, and is more conducive to the investigation of its mechanism.

Oxidative stress and cyto-genotoxicity induced by poly-d-glucosamine in human blood cells in vitro

Poly-N-acetyl-d-glucosamine (CH; chitin) is the main component of the insect skeleton, fungal cell wall, and many crustaceans, including crab and shrimp. CH is the most abundant in nature after cellulose, and it has a complex and hardly soluble structure. Poly-d-glucosamine (CHO; chitosan) is a soluble derivative of CH produced by deacetylation used in many fields, including human health. This study carried out the cytotoxic, genotoxic, and oxidative effects of CHO on human whole blood (hWB) and lymphocytes (LYMs) in dose ranges 6.25-2000 μg/mL, in vitro. Total antioxidant capacity (TAC) and total oxidant status (TOS) analyzes were performed on plasma to appreciate oxidative stress. 3-(4,5-Dimethylthiazol-2-yl)-2,5 diphenyltetrazolium bromide (MTT) and lactate dehydrogenase (LDH) assays were applied to understand the cytotoxicity. Chromosomal aberration (CA) and micronucleus (MN) methods were practiced to evaluate genotoxicity. 6.25-150 μg/mL doses increased TAC and decreased TOS. A decreasing and increasing curve from 200 to 2000 μg/mL on TAC and TOS values were determined, respectively. 0-250 μg/mL doses did not provide any cytotoxic data. However, 500-2000 μg/mL doses showed increasing cytotoxicity and genotoxicity. The study results showed that CHO does not pose a toxic risk to human health at low doses but may pose a threat at high doses.

The potential roles of chitosan oligosaccharide in prevention of kidney injury in obese and diabetic conditions

Obesity is closely associated with insulin resistance (IR). The most likely links between the two are obesity-mediated systemic low-grade chronic inflammation, endoplasmic reticulum stress and mitochondrial dysfunction, which are all known to contribute to the development of type 2 diabetes (T2DM) and eventually diabetic nephropathy (DN). Chitosan oligosaccharide (COS) is an oligomer of chitosan prepared by the deacetylation of chitin commonly found in exoskeletons of crustaceans such as shrimp and crab as well as the cell walls of fungi. COS has various biological effects including lipid lowering, anti-inflammation, anti-diabetes, and anti-oxidant effects. Therefore, COS is a potential new therapeutic agent for treatment of the obesity-induced DN condition. It is an abundant natural polymer and therefore freely available. This review includes information regarding the relationship between obesity, IR, T2DM, and DN as well as the potential usefulness of COS in controlling lipid and cholesterol metabolism, T2DM and kidney injury models in both in vivo and in vitro studies. However, evidence is limited regarding the effect of COS on the DN model. Further studies, especially in obesity-induced DN, are needed to support the mechanisms proposed in this review.

Chitosan derivatives-based films as pH-sensitive drug delivery systems with enhanced antioxidant and antibacterial properties

The purpose of this study was to develop and characterize chitosan (Ch)-based films incorporated with varying molecular weight (Mw) and acetylation degree (AD) chitosan-depolymerization-products (CDP), to be applied as drug delivery materials. As compared to Ch-film, optical and antioxidant potentials of Ch/CDP-based films were improved, particularly using low Mw and AD-CDP. Whereas, films water resistance, mechanical and antibacterial properties increased as CDP-Mw increased and AD decreased. For the thermal and swelling behaviors, better values were obtained using higher Mw and AD-CDP. Further, to assess their in vitro ciprofloxacin (CFX)-release behavior, loaded-CFX Ch/CDP-based films, crosslinked using glutaraldehyde, were prepared. Expect of elongation at break, crosslinked CFX-loaded films showed increased optical, water resistance, tensile strength and thermal properties, as compared to unloaded films. The CFX-release profiles indicated that a slower and sustained release was observed, particularly when using lower Mw and AD-CDP, and mainly for the crosslinked films during 48 h. These films can release CFX for up to 54% in 6 and 24 h, at pH 1.2 and 7.4, respectively. Through this study, novel biodegradable, swellable and pH-sensitive crosslinked Ch/CDP-based films may be considered as suitable and promising drug delivery systems.

Packaging of beef fillet with active chitosan film incorporated with ɛ-polylysine: An assessment of quality indices and shelf life

In the current study, the effect on packaged beef fillets (1 × 5 × 8 cm) of using active chitosan film (1%) was investigated. The fillets were stored at 4 °C for 12 days, and the film contained ɛ-polylysine (ɛ-PL) (0.3, 0.6, and 0.9% w/w). Chemical, microbiological, sensory properties, and quality indices of the fillets were investigated. Added to these factors was an assessment of the influence of ɛ-polylysine incorporation on the optical, structural, barrier, and mechanical specifications (elongation at break and tensile strength) of chitosan films. Based on the findings, a significant difference among the corresponding values to thickness, color, water vapor permeability (WVP), and mechanical specifications between the treated films by ɛ-PL and untreated films were noted. In addition, higher values of thickness and tensile strength were correlated with ɛ-PL added active chitosan films while compared with control samples. Additionally, no significant differences regarding the proximate composition (including protein, moisture, and fat) among beef fillet samples were observed. In this regard, due to significantly lower levels of pH, TVB-N, and TBARS ɛ-PL in enriched films, this technique demonstrated some protective effects on beef fillets. Another observation was that lower levels of the total viable count, coliform, mold, yeasts, and higher sensory properties were significantly associated with samples with added ɛ-PL (0.9%). Therefore, adding ɛ-PL into chitosan films could be introduced as an effective technique to extend the shelf life of beef fillets and maintain their quality indices during refrigerated storage.