Wheat starch gelatinization under microwave irradiation and conduction heating

Recent Advances in Physical Processing Techniques to Enhance the Resistant Starch Content in Foods: A Review

The physical modification of starch to produce resistant starch (RS) is a viable strategy for the glycemic index (GI) lowering of foods and functionality improvement in starchy food products. RS cannot be digested in the small intestine but can be fermented in the colon to produce short-chain fatty acids rather than being broken down by human digestive enzymes into glucose. This provides major health advantages, like better blood sugar regulation, weight control, and a lower chance of chronic illnesses. This article provides a concise review of the recent developments in physical starch modification techniques, including annealing, extrusion, high-pressure processing, radiation, and heat-moisture treatment. Specifically, the focus of this paper is on the alteration of the crystalline structure of starch caused by the heat-moisture treatment and annealing and its impact on the resistance of starch to enzymatic hydrolysis, as well as the granular structure and molecular arrangement of starch caused by extrusion and high-pressure processing, and the depolymerization and crosslinking that results from radiation. The impacts of these alterations on starch's textural qualities, stability, and shelf life are also examined. This review demonstrates how physically modified resistant starch can be used as a flexible food ingredient with both functional and health benefits. These methods are economically and ecologically sustainable since they successfully raise the RS content and improve its functional characteristics without the need for chemical reagents. The thorough analysis of these methods and how they affect the structural characteristics and health advantages of RS emphasizes the material's potential as an essential component in the creation of functional foods that satisfy contemporary dietary and health requirements.

Casein/butyrylated dextrin nanoparticles and chitosan stabilized bilayer emulsions as fat substitutes in sponge cakes

This study aimed to evaluate the potential of the bilayer emulsions stabilized with casein/butyrylated dextrin nanoparticles and chitosan as fat substitutes in preparing low-calorie sponge cakes. Among the different cake groups, the substitution of bilayer emulsions at 60% exhibited comparable baking properties, appearance, texture characteristics and stable secondary structure to fat. The specific volume and height were increased by 36.94% and 22%, respectively, while the cake showed higher lightness (L*) in the cores and softer hardness in the crumb. In addition, the moisture content of cakes was increased while the water activity remained unchanged. These results showed that casein/butyrylated dextrin bilayer emulsion was a potential fat substitute for cake products at the ratio of 60% with the desirable characteristics.

Harnessing the power of resistant starch: a narrative review of its health impact and processing challenges

Starch is a primary energy storage for plants, making it an essential component of many plant-based foods consumed today. Resistant starch (RS) refers to those starch fractions that escape digestion in the small intestine and reach the colon where they are fermented by the microflora. RS has been repeatedly reported as having benefits on health, but ensuring that its content remains in food processing may be challenging. The present work focuses on the impact RS on health and explores the different processes that may influence its presence in foods, thus potentially interfering with these effects. Clinical evidence published from 2010 to 2023 and studying the effect of RS on health parameters in adult populations, were identified, using PUBMED/Medline and Cochrane databases. The search focused as well on observational studies related to the effect of food processes on RS content. While processes such as milling, fermentation, cooking and heating seem to have a deleterious influence on RS content, other processes, such as cooling, cooking time, storage time, or water content, may positively impact its presence. Regarding the influence on health parameters, there is a body of evidence suggesting an overall significant beneficial effect of RS, especially type 1 and 2, on several health parameters such as glycemic response, insulin resistance index, bowel function or inflammatory markers. Effects are more substantiated in individuals suffering from metabolic diseases. The effects of RS may however be exerted differently depending on the type. A better understanding of the influence of food processes on RS can guide the development of dietary intake recommendations and contribute to the development of food products rich in RS.

A review of green methods used in starch-polyphenol interactions: physicochemical and digestion aspects

The interactions of starch with lipids, proteins, and other major food components during food processing are inevitable. These interactions could result in the formation of V-type or non-V-type complexes of starch. The starch-lipid complexes have been intensively studied for over five decades, however, the complexes of starch and polyphenols are relatively less studied and are the subject of recent interest. The interactions of starch with polyphenols can affect the physicochemical properties and its digestibility. The literature has highlighted several green methods such as ultrasound, microwave, high pressure, extrusion, ball-milling, cold plasma etc., to assist interactions of starch with polyphenols. However, comprehensive information on green methods to induce starch-polyphenol interactions is still scarce. Therefore, in light of the importance and potential of starch-polyphenol complexes in developing functional foods with low digestion, this review has summarized the novel green methods employed in interactions of starch with flavonoids, phenolic acids and tannins. It has been speculated that flavonoids, phenolic acids, and tannins, among other types of polyphenols, may have anti-digestive activities and are also revealed for their interaction with starch to form either an inclusion or non-inclusion complex. Further information on the effects of these interactions on physicochemical parameters to understand the chemistry and structure of the complexes is also provided.

Effects of Reheating Methods on Rheological and Textural Characteristics of Rice Starch with Different Gelatinization Degrees

Pregelatinized starch (PGS) is often used to improve the processing quality of foodstuffs, but little attention has been paid to the effects of different reheating methods and degree of starch gelatinization (DSG) on their rheological and textural properties. In this study, pregelatinized rice starches (RS) with gelatinization degrees ranging from 58% to 100% were prepared via different Rapid Visco Analyser (RVA) heating procedures and reheated in various methods, including high-power microwave (HM), low-power microwave (LM), and water bath. The rheological behavior and textural properties were explored, and the results demonstrated that the consistency, gel strength, hardness, and springiness of PGS in all tested samples decreased significantly after reheating. The storage modulus (G') of PGS increased dramatically while the thermal stability decreased. Interestingly, the reheating methods possessed various effects on the starch of different DSG.

Influence of Resistant Starch in Whole Rice on Human Gut Microbiota─From Correlation Implications to Possible Causal Mechanisms

Rice is the main staple food for a large population around the world, while it generally has a high glycemic index and low resistant starch (RS) content. Although many strategies have been applied to develop healthier rice products with increased RS contents, their actual effects on gut microbiota and human health remain elusive. In this review, currently available production methods of rice RS are briefly summarized, followed by a critical discussion on their interactions with gut microbiota and subsequent effects on human health, from correlation implications to causal mechanisms. Different contents, types, and structures of RS have been produced by strategies such as genetic manipulation and controlling cooking conditions. The difference can largely determine effects of rice RS on gut microbiota composition and metabolites by specific RS-gut microbiota interactions. This review can thus help the rice industry develop rice products with desirable RS contents and structures to generally improve human health.

Research progress in fluid and semifluid microwave heating technology in food processing

Microwave is a form of electromagnetic radiation that has high penetration and heating efficiency in food processing. Uneven heating is the main problem of microwave processing, especially in solid foods. Fluid and semifluid media, which are good carriers in microwave processing, have uniform dielectric properties and good material fluidity. Herein, we review the development, application prospects, and limitations of microwave in fluid and semifluid food processing and the research progress in microwave heating with steam as carrier. The mixture of generated steam and tiny micro droplets from food material under the action of microwave can absorb microwave and transfer heat evenly, which effectively improves the uniformity of microwave heating. Due to the relatively uniform dielectric properties and consistent texture of fluid and semifluid food materials, uneven heating phenomenon during their microwave processing can be significantly inhibited. Based on the development of microwave heating technology and equipment design, the microbial inactivation and enzyme inhibition in fluid and semifluid food were improved and food product with better retention of nutrients and sensory profile were produced. Also, microwave radiation can be used to prepare the printing material or process the printed product for 3D food printing, which enhances the added value of 3D printed products and the personalization of food manufacturing. In future research, intelligent control technology can be applied in the microwave processing of fluid and semifluid food materials for various applications. Therefore, the processing conditions can be adjusted automatically.

Myofibrillar protein composite gels: effect of esterified potato starch, lard and peanut oil on the gel properties

BACKGROUND

Heat-induced composite gels were prepared with 20 g kg^-1 myofibrillar protein (MP) sol, 20 g kg^-1 modified starch and 100 g kg^-1 lipid pre-emulsified by MP in 0.6 mol L^-1 NaCl, at pH 6.2. The effects of esterified potato starch (EPS) and emulsified lipid (lard or peanut oil) on the rheology, texture properties and nuclear magnetic resonance characterization of MP gel were evaluated.

RESULTS

The addition of starch and lipid significantly improved the gel strength and water holding capacity (WHC) of the MP gel. Analysis of the relaxation time compared with the WHC tests showed that the variation range of the transverse T₂₂ relaxation time of a gel was positively proportional to changes in WHC of the composite gel, and the lower the T₂₂ relaxation time, the better the WHC of composite gel. Moreover, MP gel with starch and emulsified lard added at the same time has the lowest T₂ relaxation time, and also the best WHC of the gel. Environmental scanning electron microscopy showed that emulsified oil droplets embedded the gaps in the protein network, and the gelatinized starch contributed to restrict the oil droplet size, resulting in thicker MP gel.

CONCLUSION

Emulsified lipid and modified starch have an important influence on the rheology and microstructure of MP gels, indicating the subtle interaction between starch, lipid and protein. The results suggest the potential feasibility of modified starch and vegetable oil to improve the textural properties in comminuted meat products. © 2021 Society of Chemical Industry.

Proso-millet starch: Properties, functionality, and applications

Previously proso-millet, considered an underutilized cereal, has drawn considerable attention due to health benefits like good nutritional profile, low glycemic index, and gluten-free. The present review discusses starch extractability, structural characteristics, morphology, and physicochemical properties. Starch properties mainly depend on the amylose and amylopectin composition and distribution of brained chains. A very diverse starch structure and morphology were observed among the waxy and non-waxy cultivars. The amylose content ranged from 0.75 to 28.3% in many varieties, but exceptionally Hongmeizi variety showed a 32.3% as per the reported evidence. There are a positive correlation between the amylose content and cooking quality, thermal and pasting properties. The size and shape of smallest to largest starch granules varied between 0.3 and 17 μm and round to polygonal, respectively. The non-waxy starch varieties of proso-millet are widely used in food processing due to high resistance to swelling during heat treatment. Few food applications of proso-millet are bakery products like gluten-free bread, porridge, pasta, ready-to-eat breakfast cereals, infant foods, and distilleries. We can conclude that proso millet is an alternative to existing starch for its quality characteristics and provides insight to many food processing industries.

A review on the physicochemical properties of starches modified by microwave alone and in combination with other methods

Native starches are unsuitable for most industrial applications. Therefore, they are modified to improve their application in the industry. Starch may be modified using enzymatic, genetic, chemical, and physical methods. Due to the demand for safe foods by consumers, researchers are focusing on the use of cheap, safe and environmentally friendly methods such as the use of physical means for starch modification. Microwave heating of starch is a promising physical method for starch modification due to its advantages such as homogeneous operation throughout the whole sample volume, shorter processing time, greater penetration depth and better product quality. More recently, the use of synergistic methods for starch modification is being encouraged because they confer better functionality on starch than single methods. This review summarizes the present knowledge on the structure and physicochemical properties of starches from different botanical origins modified using microwave heating alone and in combination with other starch modification methods.

RS Content and eGI Value of Cooked Noodles (I): Effect of Cooking Methods

Noodles are widely consumed in China, which can be cooked in different ways. The effects of different cooking methods (boiling, steaming, microwave heating, stir-frying and frying) on the resistance starch (RS) content and digestive properties (digestion rate, digestibility and estimated glycemic index (eGI) value) of noodles were investigated. The RS content was greatly affected by the cooking time, and it was varied when the noodles were optimally cooked using different cooking methods. The RS contents of the microwaved and stir-fried noodles were relatively high (0.59%-0.99%), but it was lower (0.43%-0.44%) in the boiled and steamed noodles. Microwaved noodles showed the slowest digestion rate and the lowest eGI. Due to the limited water within fried noodles, none RS was found in the fried noodles, whereas stir-fried noodles showed RS5 formation from the XRD and DSC results. Compared with boiled and steamed noodles, the microwaved noodles showed a more compact morphology without porous holes on the surface, whereas fried noodles showed irregular morphology. The results indicated that the digestive properties of noodles made with the same ingredients can be greatly altered by using different cooking methods, and the digestive properties of different cooked noodles are worthy of confirmation using in vivo analysis.

The effect of the ultrasound process and pre-gelatinization of the corn flour on the textural, visual, and sensory properties in gluten-free pan bread

The present study used ultrasound waves with the intensity of zero, 30, and 70%, as well as the microwave-induced pre-gelatinization of corn flour and natural ones to produce gluten-free pan bread. To this end, the microstructure of pre-gelatinized corn flour was compared to the natural one. The result of the electron microscope image indicated the extension of structure and further swelling of the pre-gelatinized corn flour as compared to the natural one. In addition, the result represented that samples containing pre-gelatinized corn flour had a firmer dough, more moisture, porosity, specific volume, the L* component of the crust and crumb texture, the a* component of crumb texture and the sensory properties when compared to those which contained the native corn flour. Based on the results, pre-gelatinized corn flour caused a decrease in the b* component in the crust and crumb texture, along with firmness during 2 and 72 h after baking. On the other hand, the ultrasound waves resulted in a reduction in the dough and bread firmness and b* colorful component while those with 30% intensity increased the L* colorful component, specific volume, porosity, and the overall acceptability score in sensory assessment. In general, the sample containing pre-gelatinized corn flour, treated with 30% intensity of ultrasound waves demonstrated better technological, visual, and sensory properties and was considered as a superior sample in the present study.

Effects of heat-moisture, autoclaving, and microwave treatments on physicochemical properties of proso millet starch

Proso millet starch was modified by heat-moisture treatment (HMT), autoclaving treatment (AT), and microwave treatment (MT). The effects of these treatments on the starch physicochemical, structural, and molecular properties were investigated. The amylose and resistant starch contents were increased by AT and MT, but only slightly by HMT. HMT and AT significantly increased the water-holding capacity, to 172.66% and 191.63%, respectively. X-ray diffractometry showed that the relative crystallinity of the HMT sample decreased by 20.88%, and the crystalline peaks disappeared from the AT and MT sample patterns. The thermal treatments decreased the proso millet starch molecular weight to 1.769 × 106, 7.886 × 105, and 3.411 × 104 g/mol, respectively. The thermal enthalpy decreased significantly in HMT. Modification significantly changed the pasting profiles of the native proso millet starch, and the peak viscosity, setback, and breakdown values decreased. These results clarify the mechanism of starch changes caused by thermal treatment.

Effect of Microwave Irradiation on the Physicochemical and Digestive Properties of Lotus Seed Starch

The objective of this study is to investigate the effect of microwave irradiation on the physicochemical and digestive properties of lotus seed starch. The physicochemical properties of lotus seed starch were characterized by light microscopy, (1)H NMR, FT-IR spectroscopy, and HPSEC-MALLS-RI. The starch-water interaction and crystalline region increased due to the changed water distribution of starch granules and the increase of the double-helix structure. The swelling power, amylose leaching, molecular properties, and radius of gyration reduced with the increasing microwave power, which further affected the sensitivity of lotus seed starch to enzymatic degradation. Furthermore, the resistant starch and slowly digestible starch increased with the increasing microwave irradiation, which further resulted in their decreasing hydrolysis index and glycemic index. The digestive properties of lotus seed starch were mainly influenced by the reduced branching degree of amylopectin and the strong amylose-amylose interaction.

Development of an analytical method to measure insoluble and soluble starch in sugarcane and sweet sorghum products

A rapid research method using microwave-assisted probe ultrasonication was developed to quantify total, insoluble, and soluble starch in various sugar crop products. Several variables affecting starch solubilisation were evaluated, (1) heating method, (2) boiling time, (3) probe ultrasonication time, (4) water loss, (5) concentration, (6) sample colour, and (7) sample. The optimised method solubilises < 40,000 ppm insoluble starch with microwave-assisted sonication in 6 min, has acceptable precision (<6% CV), accuracy (⩾ 95%), uses a corn starch reference, and incorporates a colour blank to remove contribution from natural colourants found in industrial samples. This method was validated using factory samples and found applicable to sugarcane and sweet sorghum bagasse (3% CV), mixed juices (2%), massecuites (4%), molasses (7%), and raw sugars (12%), 100% satisfactory performance z-scores were also obtained. Total starch values obtained with this method were significantly higher than those measured using other methods presently accepted by the sugar industry.

Effect of microwave treatment on the physicochemical properties of potato starch granules

Background

The degree of polymerization of amylose starch in potato was so large that the gel was hardness after gelatinization. Therefore, it is one of the most important ways that the microwave treatment was used to change the physicochemical properties of starch gel to make it suitable for the preparation of instant food.

Results

The effect of microwave treatment on the physicochemical properties including morphology, crystalline structure, molecular weight distribution and rheological properties of potato starch granules was evaluated by treating time of varying duration (0, 5, 10, 15, 20 s) at 2450 MHz and 750 W. Scanning electron micrographs (SEM) of potato starch granules showed flaws or fractures on the surface after 5 to 10s of microwaving and collapse after 15 to 20 s. Polarized light microscopy (PLM) indicated that microwave treating damaged the crystalline structure of potato starch, such that the birefringence of starch granules gradually decreased after 5 to 10s and even disappeared after microwaving from 15 to 20 s. The molecular weight (Mw) values of potato starch and the proportion of large M_W fraction were considerably reduced with increasing the microwave treating time from 0 to 20s. The molecular weight slowly decreased over 5 ~ 15 s microwave treating but decreased abruptly at the time of 20s microwave treating. The apparent viscosity decreased as shear rate increased and presented shear-thinning behavior. The magnitudes of the storage modulus (G’) and loss modulus (G”) obtained at each shear rate increased with duration of microwave treating from 0 to 15 s but decreased from 15 to 20 s.

Conclusions

These results demonstrated that the morphology and crystalline structure was damaged by microwave treatment. The high molecular weight of potato starch above 2 × 10⁸ Da was so sensitive to the vibrational motion of the polar molecules due to the application microwave energy and broke easily for longer dextran chains. The fracture of starch granules, molecular chains leached from the starch granules and degradation of dextran chains contributing to the development of rheological properties.