Fractional isolation and structural characterization of hemicelluloses from Caragana korshinskii

Characterization of hemicellulose in Cunninghamia lanceolata stem during xylogenesis

In this study, hemicellulose was isolated from the apical, middle and basal segments of C. lanceolata stem to investigate the dynamic change of its structure during xylogenesis. Results showed that the C. lanceolata hemicellulose is mainly consisted of O-acetylgalactoglucomannan (GGM) which backbone is alternately linked by β-d-mannopyranosyl (Manp) and β-d-glucopyranosyl (Glcp) via (1 → 4)-glycosidic bond, while the side chains are α-d-galactopyranosyl (Galp) and acetyl. In addition, 4-O-methylglucuronoarabinoxylan (GAX) is another dominant structure of C. lanceolata hemicellulose which contains a linear backbone of (1 → 4)-β-d-xylopyranosyl (Xylp) and side chains of 4-O-Me-α-d-glucuronic acid (MeGlcpA) and α-L-arabinofuranose (Araf). The thickness of the cell wall, the ratio of GGM/GAX and the molecular weight of hemicellulose were increased as the extension of growth time. The degree of glycosyl substitutions of xylan and mannan was decreased from 10.34 % (apical) to 8.38 % (basal) and from 15.63 % (apical) to 10.49 % (basal), respectively. However, the total degree of acetylation was enhanced from 0.28 (apical) to 0.37 (basal). Transcriptome analysis showed that genes (CSLA9, IRX9H1, IRX10L, IRX15L, GMGT1, TBL19, TBL25, GUX2, GUX3, GXM1, F8H1 and F8H2) related to hemicellulose biosynthesis are mainly expressed in mature part. This study is of great significance for genetic breeding and high-value utilization of C. lanceolata.

Structural Characterization of Polysaccharides in Waste Liquor Produced by Wet Decortication of Sesame Seeds

The wet decortication of sesame seeds produces wastewater containing diverse minerals and organic pollutants that could be valuable resources for the food industry. This investigation aimed to reclaim, purify, and characterize the polysaccharides contained in the waste liquor from the sesame decortication industry. The purified polysaccharide fractions were characterized using monosaccharide analysis, GPC (high-performance gel permeation chromatography), FT-IR (Fourier-transform infrared) spectroscopy, methylation analysis, 1D and 2D Nucleai Magnetic Resonance (NMR) analysis, and thermal analysis. Four fractions were found (SSP-1,-2,-3, -4), of which SSP-2 was proportionately the largest and most interesting. The backbone of SSP-2 is mainly composed of (1→2,4)-β-_D-Xylp residues with side chains connected to the O-4 position, with many T-β-_D-Galp and (1→5)-α-_L-Araf residues, and fewer (1→4)-α-_D-Glcp, (1→2)-α-_L-Rhap, T-α-_L-Araf, and (1→2)-β-_D-GlcpA residues. An efficient method for removing the polysaccharides would simplify wastewater treatment while finding a use for them would benefit the sesame, food, and pharmaceutical industries.

Efficient fractionation of woody biomass hemicelluloses using cholinium amino acids-based deep eutectic solvents and their aqueous mixtures

Novel and green cholinium amino acids-based deep eutectic solvents (DESs) and their aqueous mixtures were synthesized and employed in deconstructing poplar for hemicellulose fractionation. The effects of water content in DESs on hemicellulose dissociation and structural features were comprehensively investigated, along with the reusability of DESs for treatment. The integration of water into DESs could facilitate hemicellulose fractionation, and the cholinium lysine: urea with 5 wt% water (CL: U-5) demonstrated the best performance with a hemicellulose yield of 59.2%. Further structure analysis revealed that hemicelluloses with various branching degrees and molecular weights were obtained with varying water content of DESs. Furthermore, the CL: U-5 had recyclability and reusability with a 40.5% hemicellulose yield obtained after reused three times. The novel and eco-friendly cholinium amino acids-based DESs treatment provides an effective and sustainable strategy for hemicellulose fractionation from woody biomass.

Comparative analysis of alkaline-extracted hemicelluloses from Beech, African rose and Agba woods using FTIR and HPLC

The vast application of hemicellulose in industry is greatly influenced by its chemical components. The current study focuses on identifying the chemical components of a high yield alkaline-extracted hemicellulose and characterization to serve as a guide for more specific and effective biotechnological uses. In this study we isolated hemicellulose from sawdust of three different wood species (Beech, African rose and Agba woods) and characterized them using FTIR and HPLC techniques. Hydroxyl spectra vibrations were observed at 3919-3671 cm⁻¹ and 3454-3211 cm⁻¹ which indicates the presence of non-hydrogen bonded OH stretch and normal polymeric OH stretch in all three samples. The samples contained residual lignin indicated by IR absorption bands at 1592 and 1525 cm⁻¹. The presence of C=O stretching vibrations of acetyl groups at 1734 cm⁻¹ indicated that African rosewood was generally an acetylated molecule. Each heteropolysaccharide also contained reducing monosaccharides at their ends suggested by the C–H stretching vibrations. Infrared absorptions characteristic of asymmetric β-1,6-glycosidic stretching was present in Beechwood and Agbawood, respectively, and African rosewood gave three absorption bands β-1,3-glycosidic stretch, β-1,4-glycosidic stretch and an asymmetric β 1,6-glycosidic stretch, respectively. Agbawood gave a major absorption band at 923.75 cm⁻¹ corresponding to the absorption band at β-1,4-glycosidic stretching. African rosewood contained 96 % mannose and 4 % of an unidentified sugar. Beechwood contained primarily glucose, but Agbawood contained 20, 14, 8 and 57 % glucose, mannose, galactose, and an unidentified sugar, respectively.

Polysaccharide-Based Nanomaterials for Ocular Drug Delivery: A Perspective

Ocular drug delivery is one of the most challenging issues in ophthalmology because of the complex physiological structure of the eye. Polysaccharide-based nanomaterials have been extensively investigated in recent years as ideal carriers for enhancing the bioavailability of drugs in the ocular system because of their biocompatibility and drug solubilization. From this perspective, we discuss the structural instability of polysaccharides and its impact on the synthesis process; examine the potential for developing bioactive polysaccharide-based ocular drug nanocarriers; propose four strategies for designing novel drug delivery nanomaterials; and suggest reviewing the behavior of nanomaterials in ocular tissues.

Changes of Chemical Composition and Hemicelluloses Structure in Differently Aged Bamboo ( Neosinocalamus affinis) Culms

To study the differences in chemical composition analysis and spatial distribution of young Neosinocalamus affinis bamboo, we used the methods of standard of National Renewable Energy Laboratory and confocal Raman microscopy, respectively. It was found that the acid-soluble lignin and acid-insoluble lignin content showed an inverse relationship with the increasing bamboo age. Raman analysis revealed that Raman signal intensity of lignin in both the secondary cell wall and the compound middle lamella regions showed a similar increase trend with growth of bamboo. In addition, eight hemicellulosic fractions were obtained by successively treating holocellulose of the 2-, 4-, 8-, and 12-month-old Neosinocalamus affinis bamboo culms with DMSO and alkaline solution. The ratio of arabinose to xylose of hemicelluloses was increased with the growth of bamboo. FT-IR and NMR analyses revealed that DMSO-soluble hemicelluloses of young bamboo culms are mainly composed of highly substituted xylans and β-d-glucans.

Structural characterization of Chinese quince fruit lignin pretreated with enzymatic hydrolysis

Lignin is an increasingly valuable raw material for industrial, pharmaceutical and the food industries; natural antioxidants are also being used more and more widely. The Chinese quince fruits have an abundance of lignins with antioxidant properties; however, the lignins cannot be isolated by the methods conventionally used on other sources (e.g., wood, straw). In this investigation, multi-enzymatic hydrolytic pretreatments were used to isolate lignins from Chinese quince fruit, and the structures of these multi-enzyme mixture lignin (EML) fractions were then analyzed and compared with conventional cellulolytic enzyme lignin (CEL). EML fractions are structurally similar to CEL fractions except for an increased S/G ratio, greater number of β-O-4 linkages, higher average molecular weight and decreased thermal stability. The EML-2 fraction in particular seemed most representative of the lignins isolated, and it exhibited the highest antioxidant activity in comparison with CEL and other EML fractions.

Isolation and characterization of acetylated glucuronoarabinoxylan from sugarcane bagasse and straw

Sugarcane bagasse and straw are generated in large volumes as by-products of agro-industrial production. They are an emerging valuable resource for the generation of hemicellulose-based materials and products, since they contain significant quantities of xylans (often twice as much as in hardwoods). Heteroxylans (yields of ca 20% based on xylose content in sugarcane bagasse and straw) were successfully isolated and purified using mild delignification followed by dimethyl sulfoxide (DMSO) extraction. Delignification with peracetic acid (PAA) was more efficient than traditional sodium chlorite (NaClO₂) delignification for xylan extraction from both biomasses, resulting in higher extraction yields and purity. We have shown that the heteroxylans isolated from sugarcane bagasse and straw are acetylated glucuronoarabinoxylans (GAX), with distinct molecular structures. Bagasse GAX had a slightly lower glycosyl substitution molar ratio of Araf to Xylp to (0.5:10) and (4-O-Me)GlpA to Xylp (0.1:10) than GAX from straw (0.8:10 and 0.1:10 respectively), but a higher degree of acetylation (0.33 and 0.10, respectively). A higher frequency of acetyl groups substitution at position α-(1→3) (Xyl-3Ac) than at position α-(1→2) (Xyl-2Ac) was confirmed for both bagasse and straw GAX, with a minor ratio of diacetylation (Xyl-2,3Ac). The size and molecular weight distributions for the acetylated GAX extracted from the sugarcane bagasse and straw were analyzed using multiple-detection size-exclusion chromatography (SEC-DRI-MALLS). Light scattering data provided absolute molar mass values for acetylated GAX with higher average values than did standard calibration. Moreover, the data highlighted differences in the molar mass distributions between the two isolation methods for both types of sugarcane GAX, which can be correlated with the different Araf and acetyl substitution patterns. We have developed an empirical model for the molecular structure of acetylated GAX extracted from sugarcane bagasse and straw with PAA/DMSO through the integration of results obtained from glycosidic linkage analysis, ¹H NMR spectroscopy and acetyl quantification. This knowledge of the structure of xylans in sugarcane bagasse and straw will provide a better understanding of the isolation-structure-properties relationship of these biopolymers and, ultimately, create new possibilities for the use of sugarcane xylan in high-value applications, such as biochemicals and bio-based materials.

Physicochemical properties of corn stalk after treatment using steam explosion coupled with acid or alkali

The aim of this study was to evaluate comparatively the effects of different pretreatments including steam explosion, acid, and alkali, alone or in combination, on the structural properties and thermal stability of corn stalk. All of the treated treatments decreased the contents of hemicellulose and lignin and thereby increased the content of cellulose in corn stalks. But the combined treatments with alkali and steam explosion under 0.4-0.6 MPa were better as compared with other treatments based on the removals of hemicellulose and lignin, and about 71.58-79.59% of hemicellulose and 64.32-71.83% of lignin were removed. Treatment with steam explosion coupled with acid or alkali changed the bonding distribution and surface morphology and increased the crystallinity and thermal stability of corn stalks, and the degradation temperature reached over 350 °C. These results suggest that steam explosion coupled with alkali is a better method for the depolymerization of corn stalk polymer.

Hemicelluloses prior to aspen chemithermomechanical pulping: pre-extraction, separation, and characterization

A portion of hemicelluloses and acetic acid can be pre-extracted with dilute sulfuric acid prior to the aspen chemithermomechanical pulp process. The streams collected from the second press-impregnation stage after acid pre-extraction contain a significant amount of acid pre-extracted hemicelluloses. Most of the total sugars obtained from the pressate were xylan, in which xylan was further hydrolyzed to sugar monomers under the acid pre-extraction condition. To fully understand the characteristics of hemicelluloses yielded prior to pulping, the pre-extracted hemicelluloses were separated and characterized by FT-IR, (1)H NMR, and thermogravimetric analysis in this study. Most of the FT-IR bonds from the hemicelluloses agreed well with the other two spectra of birch xylan and CA0050 xylan, except a new absorption at 1734 cm(-1) contributed to acetyl groups. The hemicelluloses obtained from acid pre-extraction began to decompose significantly at about 225 °C, slightly lower in comparison with organosolv and alkaline hemicelluloses reported in the literature.

Effect of alkaline and autohydrolysis processes on the purity of obtained hemicelluloses from corn stalks

A study of the potential of autohydrolysis and alkaline extraction processes from corn stalks was performed for high purity hemicellulose extraction. The influence of process parameters on the purity of obtained hemicelluloses was analyzed. An experimental design was developed for the autohydrolysis treatments to determine the optimal conditions to solubilize the hemicelluloses with lowest content in contaminants. On the other hand, alkaline extraction, including raw material pretreatment (dewaxing and delignification step) was carried out analyzing the effectiveness of this processes for maximum pure hemicellulose recovery. The maximum yield (54% of the raw material hemicelluloses) and the best physicochemical properties (highest hemicellulose content free of lignin) were obtained with these pretreatments in alkaline extraction. Moreover, the effect of lignin removal by sulfuric acid from the autohydrolysis liquors before hemicellulose precipitation was studied. This purification step has allowed to obtain lignin-free autohydrolysis hemicellulose but with the presence of sulfur as predominant contaminant.