An electrode of quartz crystal microbalance decorated with CNT/chitosan/fibronectin for investigating early adhesion and deforming morphology of rat mesenchymal stem cells

Acoustic Biosensors and Microfluidic Devices in the Decennium: Principles and Applications

Lab-on-a-chip (LOC) technology has gained primary attention in the past decade, where label-free biosensors and microfluidic actuation platforms are integrated to realize such LOC devices. Among the multitude of technologies that enables the successful integration of these two features, the piezoelectric acoustic wave method is best suited for handling biological samples due to biocompatibility, label-free and non-invasive properties. In this review paper, we present a study on the use of acoustic waves generated by piezoelectric materials in the area of label-free biosensors and microfluidic actuation towards the realization of LOC and POC devices. The categorization of acoustic wave technology into the bulk acoustic wave and surface acoustic wave has been considered with the inclusion of biological sample sensing and manipulation applications. This paper presents an approach with a comprehensive study on the fundamental operating principles of acoustic waves in biosensing and microfluidic actuation, acoustic wave modes suitable for sensing and actuation, piezoelectric materials used for acoustic wave generation, fabrication methods, and challenges in the use of acoustic wave modes in biosensing. Recent developments in the past decade, in various sensing potentialities of acoustic waves in a myriad of applications, including sensing of proteins, disease biomarkers, DNA, pathogenic microorganisms, acoustofluidic manipulation, and the sorting of biological samples such as cells, have been given primary focus. An insight into the future perspectives of real-time, label-free, and portable LOC devices utilizing acoustic waves is also presented. The developments in the field of thin-film piezoelectric materials, with the possibility of integrating sensing and actuation on a single platform utilizing the reversible property of smart piezoelectric materials, provide a step forward in the realization of monolithic integrated LOC and POC devices. Finally, the present paper highlights the key benefits and challenges in terms of commercialization, in the field of acoustic wave-based biosensors and actuation platforms.

Mesenchymal stem cell-based nanoparticles and scaffolds in regenerative medicine

Mesenchymal stem cells (MSCs) are adult stem cells owing to their regenerative potential and multilineage potency. MSCs have wide-scale applications either in their native cellular form or in conjugation with specific biomaterials as nanocomposites. Majorly, these natural or synthetic biomaterials are being used in the form of metallic and non-metallic nanoparticles (NPs) to encapsulate MSCs within hydrogels like alginate or chitosan or drug cargo loading into MSCs. In contrast, nanofibers of polymer scaffolds such as polycaprolactone (PCL), poly-lactic-co-glycolic acid (PLGA), poly-L-lactic acid (PLLA), silk fibroin, collagen, chitosan, alginate, hyaluronic acid (HA), and cellulose are used to support or grow MSCs directly on it. These MSCs based nanotherapies have application in multiple domains of biomedicine including wound healing, bone and cartilage engineering, cardiac disorders, and neurological disorders. This study focused on current approaches of MSCs-based therapies and has been divided into two major sections. The first section elaborates on MSC-based nano-therapies and their plausible applications including exosome engineering and NPs encapsulation. The following section focuses on the various MSC-based scaffold approaches in tissue engineering. Conclusively, this review mainly focused on MSC-based nanocomposite's current approaches and compared their advantages and limitations for building effective regenerative medicines.

Scaffolding polymeric biomaterials: Are naturally occurring biological macromolecules more appropriate for tissue engineering?

Nowadays, tissue and organ failures resulted from injury, aging accounts, diseases or other type of damages is one of the most important health problems with an increasing incidence worldwide. Current treatments have limitations including, low graft efficiency, shortage of donor organs, as well as immunological problems. In this context, tissue engineering (TE) was introduced as a novel and versatile approach for restoring tissue/organ function using living cells, scaffold and bioactive (macro-)molecules. Among these, scaffold as a three-dimensional (3D) support material, provide physical and chemical cues for seeding cells and has an essential role in cell missions. Among the wide verity of scaffolding materials, natural or synthetic biopolymers are the most commonly biomaterials mainly due to their unique physicochemical and biological features. In this context, naturally occurring biological macromolecules are particular of interest owing to their low immunogenicity, excellent biocompatibility and cytocompatibility, as well as antigenicity that qualified them as popular choices for scaffolding applications. In this review, we highlighted the potentials of natural and synthetic polymers as scaffolding materials. The properties, advantages, and disadvantages of both polymer types as well as the current status, challenges, and recent progresses regarding the application of them as scaffolding biomaterials are also discussed.

Characterization of silk fibroin modified surface: a proteomic view of cellular response proteins induced by biomaterials

The purpose of this study was to develop the pathway of silk fibroin (SF) biopolymer surface induced cell membrane protein activation. Fibroblasts were used as an experimental model to evaluate the responses of cellular proteins induced by biopolymer material using a mass spectrometry-based profiling system. The surface was covered by multiwalled carbon nanotubes (CNTs) and SF to increase the surface area, enhance the adhesion of biopolymer, and promote the rate of cell proliferation. The amount of adhered fibroblasts on CNTs/SF electrodes of quartz crystal microbalance (QCM) greatly exceeded those on other surfaces. Moreover, analyzing differential protein expressions of adhered fibroblasts on the biopolymer surface by proteomic approaches indicated that CD44 may be a key protein. Through this study, utilization of mass spectrometry-based proteomics in evaluation of cell adhesion on biopolymer was proposed.

Dielectric study of the adhesion of mesenchymal stem cells from human umbilical cord on a sugarcane biopolymer

It is of current interest the identification of appropriate matrices for growing mesenchymal stem cells (MSC). These cells are able not only to regenerate themselves but also to differentiate into other type of functional cells, and so they have been extensively used in tissue engineering. In this work, we have evaluated the use of electric impedance spectroscopy (EIS) to follow the adhesion of MSC from Wharton's jelly of the human umbilical cord (hWJMSC) on sugarcane biopolymers (SCB). Impedance spectra of the systems were obtained in the frequency range of 10(2)-10(5) Hz. An EIS investigation showed that when deposited on a metallic electrode SCB films prevent the passage of electrons between the solution and the metallic interface. The impedance spectra of hWJMSCs adhered on SCB revealed that there is a significant increase in the magnitude of the impedance when compared to that of pure SCB. The corresponding resistance (real part of the impedance) was even higher for the SCB-hWJMSC system than for SCB without cells on their surface, in an indication of an increased blockage to the electron transfers. The resistance charge transfer is extracted by curve-fitting the impedance spectra to an equivalent circuit model. Also, a shift of the phase angle to higher frequencies was obtained for SCB-hWJMSC system as a result from hWJMSC adhesion. Our study demonstrates that EIS is an appropriate method to evaluate the adhesion of MSC. SCB can be considered as a promising biomaterial for tissue engineering.

Covalently Bonded Chitosan on Graphene Oxide via Redox Reaction

Carbon nanostructures have played an important role in creating a new field of materials based on carbon. Chemical modification of carbon nanostructures through grafting has been a successful step to improve dispersion and compatibility in solvents, with biomolecules and polymers to form nanocomposites. In this sense carbohydrates such as chitosan are extremely valuable because their functional groups play an important role in diversifying the applications of carbon nanomaterials. This paper reports the covalent attachment of chitosan onto graphene oxide, taking advantage of this carbohydrate at the nanometric level. Grafting is an innovative route to modify properties of graphene, a two-dimensional nanometric arrangement, which is one of the most novel and promising nanostructures. Chitosan grafting was achieved by redox reaction using different temperature conditions that impact on the morphology and features of graphene oxide sheets. Transmission Electron Microscopy, Fourier Transform Infrared, Raman and Energy Dispersive spectroscopies were used to study the surface of chitosan-grafted-graphene oxide. Results show a successful modification indicated by the functional groups found in the grafted material. Dispersions of chitosan-grafted-graphene oxide samples in water and hexane revealed different behavior due to the chemical groups attached to the graphene oxide sheet.

Elucidation of the role of carbon nanotube patterns on the development of cultured neuronal cells

Carbon nanotubes (CNTs) promise various novel neural biomedical applications for interfacing neurons with electronic devices or to design appropriate biomaterials for tissue regeneration. In this study, we use a new methodology to pattern SiO(2) cell culture surfaces with double-walled carbon nanotubes (DWNTs). In contrast to homogeneous surfaces, patterned surfaces allow us to investigate new phenomena about the interactions between neural cells and CNTs. Our results demonstrate that thin layers of DWNTs can serve as effective substrates for neural cell culture. Growing neurons sense the physical and chemical properties of the local substrate in a contact-dependent manner and retrieve essential guidance cues. Cells exhibit comparable adhesion and differentiation scores on homogeneous CNT layers and on a homogeneous control SiO(2) surface. Conversely, on patterned surfaces, it is found that cells preferentially grow on CNT patterns and that neurites are guided by micrometric CNT patterns. To further elucidate this observation, we investigate the interactions between CNTs and proteins that are contained in the cell culture medium by using quartz crystal microbalance measurements. Finally, we show that protein adsorption is enhanced on CNT features and that this effect is thickness dependent. CNTs seem to act as a sponge for culture medium elements, possibly explaining the selectivity in cell growth localization and differentiation.

Determining early adhesion of cells on polysaccharides/PCL surfaces by a quartz crystal microbalance

The early adhesions of cells to various biopolymers are important to their growths and proliferations. Here, the adhesion of cells (e.g., fibroblasts) on the electrode of a quartz crystal microbalance (QCM) that was coated by PCL or PEG/PCL and further adsorbed by chitosan (CS) or CS/hyaluronic acid (HA) layers, was examined by cell-counting technique, QCM method and MTS assay under a serum-free condition for 3 h. The surfaces on electrodes of the QCM were confirmed to have been modified by measuring their contact angles, FT-IR spectra and the weights of biopolymers affected the frequency shifts of the QCM. Among tested surfaces on electrodes, the adhesion of fibroblasts on a HA/CS/PCL surface was the most (e.g., 3.08 × 10(5) cells/cm(2)) while that on a PEG/PCL surface was the least (e.g., 0.7 × 10(5) cells/cm(2)), as determined by cell-counting technique. The frequency shift and the mass of adhering fibroblasts on HA/CS/PCL electrodes were -3,537 ± 770 Hz and 3.78 ± 0.22 μg (n = 3), respectively, that were significantly exceeded those on other electrodes (-393 ± 58 Hz and 0.32 ± 0.06 μg, n = 3, respectively, for PEG/PCL electrodes). These results were consistent with cell-counting technique. Although MTS assay yielded similar results, it was less sensitive than the two aforementioned methods. In conclusion, modified electrodes of a QCM provide a convenient and sensitive method for examining the early adhesion of cells (e.g., 3 h) to biopolymer surfaces.

Assessing the responses of cellular proteins induced by hyaluronic acid-modified surfaces utilizing a mass spectrometry-based profiling system: over-expression of CD36, CD44, CDK9, and PP2A

The cell responses to biopolymer surface at the early adhesion stages can be critical for cell survival. The purpose of this research was to assess formation of hyaluronic acid (HA) biopolymer surface, the fibroblasts were used as an experimental model to evaluate the responses of cellular proteins induced by biopolymer materials using a mass spectrometry-based profiling system. Surfaces were covered by multi-walled carbon nanotubes (CNT), chitosan (CS), and HA to increase the surface area, enhance the adhesion of biopolymer and promote the rate of cell proliferation. The amount of adhered fibroblasts on CNT/CS/HA electrodes of quartz crystal microbalance (QCM) were greatly exceeded those on other surfaces that were consistent with cell-count technique. Moreover, analyzing differential protein expressions of adhered fibroblasts on those biopolymer surfaces by proteomic approaches identified CD36, CD44, PP2A, and CDK9 as key proteins. To validate the influences of those four proteins on adhesions of fibroblasts on biopolymers, the cells were blocked by antibodies of the proteins and the adhesions of cells on the tested biopolymer surfaces were examined using a QCM technique, flow cytometric analysis and morphological observations. The results of significantly decreasing the weights and densities of the blocked fibroblasts adhering to CNT/CS/HA surfaces were obtained, and validate those proteins found by proteomic approaches. Utilizing mass spectrometry-based proteomics to evaluate cell adhesions on biopolymers is proposed.

Characterization of surface properties and cytocompatibility of ion-etched chitosan films

Surface modification of biomaterials has been highlighted by biomedical engineers as a facile method for improving cell-biomaterial interactions without the expense and time required to develop new materials. In the present study, we investigated the influence of ion-etching on the surface characteristics of chitosan films using XPS and ATR FT-IR. The physiological behavior of human dermal fibroblasts (hDFs) grown on such surfaces was studied by evaluating adhesive and proliferative properties, and by examining surface morphologies of hDFs using AFM. hDFs displayed different shapes depending on the ion-etching time. hDFs grown on chitosan films ion-etched for 5 min displayed better development of lamellipodia and filopodia around the hDF periphery than did cells grown on nonmodified chitosan film, whereas hDFs did not spread well on films ion-etched for 20 min. Films ion-etched for 5 min or less had higher NH(2) and COOH contents, leading to enhanced hDF adhesion and proliferation.

Using polymeric materials to control stem cell behavior for tissue regeneration

Patients with organ failure often suffer from increased morbidity and decreased quality of life. Current strategies of treating organ failure have limitations, including shortage of donor organs, low efficiency of grafts, and immunological problems. Tissue engineering emerged about two decades ago as a strategy to restore organ function with a living, functional engineered substitute. However, the ability to engineer a functional organ is limited by a limited understanding of the interactions between materials and cells that are required to yield functional tissue equivalents. Polymeric materials are one of the most promising classes of materials for use in tissue engineering, due to their biodegradability, flexibility in processing and property design, and the potential to use polymer properties to control cell function. Stem cells offer potential in tissue engineering because of their unique capacity to self-renew and differentiate into neurogenic, osteogenic, chondrogenic, and myogenic lineages under appropriate stimuli from extracellular components. This review examines recent advances in stem cell-polymer interactions for tissue regeneration, specifically highlighting control of polymer properties to direct adhesion, proliferation, and differentiation of stem cells, and how biomaterials can be designed to provide some of the stimuli to cells that the natural extracellular matrix does.