Dopamine-dependent functions of hyaluronic acid/dopamine/silk fibroin hydrogels that highly enhance N-acetyl-L-cysteine (NAC) delivered from nasal cavity to brain tissue through a near-infrared photothermal effect on the NAC-loaded hydrogels

Hyaluronic acid/silk fibroin (HA/SF or HS) hydrogels with remarkable mechanical characteristics have been reported as tissue engineering biomaterials. Herein, the addition of dopamine/polydopamine (DA/PDA) to HS hydrogels to develop multifunctional HA/PDA/SF (or HDS) hydrogels for the delivery of drugs such as N-acetyl-L-cysteine (NAC) from nasal to brain tissue is examined. Herein, DA-dependent functions of HDS hydrogels with highly adhesive forces, photothermal response (PTR) effects generated by near infrared (NIR) irradiation, and anti-oxidative effects were demonstrated. An in-vitro study shows that the HDS/NAC hydrogels could open tight junctions in the RPMI 2650 cell line, a model cell of the nasal mucosa, as demonstrated by the decreased values of transepithelial electrical resistance (TEER) and more discrete ZO-1 staining than those for the control group. This effect was markedly enhanced by NIR irradiation of the HDS/NAC-NIR hydrogels. Compared to the results obtained using NAC solution, an in-vivo imaging study (IVIS) in rats showed an approximately nine-fold increase in the quantity of NAC delivered from the nasal cavity to the brain tissue in the span of 2 h through the PTR effect generated by the NIR irradiation of the nasal tissue and administration of the HDS/NAC hydrogels. Herein, dopamine-dependent multifunctional HDS hydrogels were studied, and the nasal administration of HDS/NAC-NIR hydrogels with PTR effects generated by NIR irradiation was found to have significantly enhanced NAC delivery to brain tissues.

Antioxidative NAC-Loaded Silk Nanoparticles with Opening Mucosal Tight Junctions for Nasal Drug Delivery: An In Vitro and In Vivo Study

Using nasal routes to deliver drugs to the brain using multifunctional nanoparticles (NPs) to bypass the blood–brain barrier (BBB) might enhance the delivery efficacy. Anti-oxidative N-Acetyl-L-cysteine (NAC)-loaded silk fibroin (SF/NAC) NPs are produced, characterized and studied as a potential delivery vehicle for NAC delivered to the brain via nasal for both in vitro and in vivo studies. The NPs are not cytotoxic to RPMI 2650 cells, mucosal model cells, at a concentration of 6000 μg/mL. The anti-oxidative activities of SF/NAC NPs are demonstrated by high H₂O₂ scavenge capacities of the NPs and shown by mitochondrial superoxide (MitoSOX) immunostaining of human mesenchymal stem cells. Tight junctions in RPMI 2650 cells are opened after 30 min of incubation with SF/NAC NPs, which are demonstrated by measuring the decrease in trans-epithelial electrical resistance (TEER) values and discreteness in ZO-1 stains. The cellular uptake of SF/NAC NPs by RPMI 2650 cells is significantly greater than that for SF NPs and increased with increasing incubation time. In an in vivo imaging study (IVIS) using rats shows that the amount of NAC that is delivered to the brain by SF/NAC NPs increased by 1.40–2.60 times and NAC is retained longer in the nasal cavity than NAC solutions in a 2-h study.

Hydrogels: Properties and Applications in Biomedicine

Hydrogels are crosslinked polymer chains with three-dimensional (3D) network structures, which can absorb relatively large amounts of fluid. Because of the high water content, soft structure, and porosity of hydrogels, they closely resemble living tissues. Research in recent years shows that hydrogels have been applied in various fields, such as agriculture, biomaterials, the food industry, drug delivery, tissue engineering, and regenerative medicine. Along with the underlying technology improvements of hydrogel development, hydrogels can be expected to be applied in more fields. Although not all hydrogels have good biodegradability and biocompatibility, such as synthetic hydrogels (polyvinyl alcohol, polyacrylamide, polyethylene glycol hydrogels, etc.), their biodegradability and biocompatibility can be adjusted by modification of their functional group or incorporation of natural polymers. Hence, scientists are still interested in the biomedical applications of hydrogels due to their creative adjustability for different uses. In this review, we first introduce the basic information of hydrogels, such as structure, classification, and synthesis. Then, we further describe the recent applications of hydrogels in 3D cell cultures, drug delivery, wound dressing, and tissue engineering.

Biomaterial-induced conversion of quiescent cardiomyocytes into pacemaker cells in rats

Pacemaker cells can be differentiated from stem cells or transdifferentiated from quiescent mature cardiac cells via genetic manipulation. Here we show that the exposure of rat quiescent ventricular cardiomyocytes to a silk-fibroin hydrogel activates the direct conversion of the quiescent cardiomyocytes to pacemaker cardiomyocytes by inducing the ectopic expression of the vascular endothelial cell-adhesion glycoprotein cadherin. The silk-fibroin-induced pacemaker cells exhibited functional and morphological features of genuine sinoatrial-node cardiomyocytes in vitro, and pacemaker cells generated via the injection of silk fibroin in the left ventricles of rats functioned as a surrogate in situ sinoatrial node. Biomaterials with suitable surface structure, mechanics and biochemistry could facilitate the scalable production of biological pacemakers for human use.

Sol-gel based synthesis and biological properties of zinc integrated nano bioglass ceramics for bone tissue regeneration

Bone is a flexible and electro active tissue that is vulnerable to various traumatic injuries. The self-healing of damaged bone tissue towards reconstruction is limited due to the lack of proper niche compliances. Nevertheless, the classical grafting techniques like autograft/allograft for bone repair pose challenges like bacterial infections and donor-site morbidity with unsatisfactory outcomes. The use of appropriate biomaterial with osteogenic potential can meet these challenges. In this regard, bioactive glass ceramics is widely used as a bone filler or graft material because of its bonding affinity to bone leading towards bone reconstruction applications without the challenge of post implant infections. Hence, the current study is aimed at addressing this potentiality of zinc (Zn) for doped the bioglass at nano-scale advantages for bone tissue repair. Since, Zn has been demonstrated to have not only antibacterial property but also the stimulatory effect on osteoblasts differentiation, mineralization by enhancing the osteogenic genes expression. In view of these, the present study is focused on sol-gel synthesis and pysico-chemical characterization of Zinc-doped bioglass nanoparticles (Zn-nBGC) and also analyzing its biological implications. The surface morphological and physiochemical characterizations using SEM, EDX, FT-IR and XRD analysis has shown the increased surface area of Zn-nBGC particles providing a great platform for biomolecular interaction, cytocompatibility, cell proliferation and osteogenic differentiation. The obtaining hydroxy apatite groups have initiated in vitro mineralization towards osteogenic lineage formation. Zn has not only involved in enhancing cellular actions but also strengthen the ceramic nanoparticles towards antibacterial application. Hence the finding suggests a biomaterial synthesis of better biomaterial for bone tissue engineering application by preventing post-operative bacterial infection.

Metal doped calcium silicate biomaterial for skin tissue regeneration in vitro

This study spots light on combined Wound healing process conjoining blood coagulation, inflammation reduction, proliferation and remodeling of the cells. The objective is to overcome the drawbacks of conventional clinically applied wound dressings such as poor rigidity, porosity, mechanical potency and bactericidal activity. As nosocomial infection is a very common condition at the wound site, bio-adhesive materials with intrinsic antibacterial properties are used in clinical applications. Considering the provenability of Wollastonite [Calcium silicate (CaSiO3)] to regenerate the soft tissues by inducing vascularization and regeneration of fibroblast cells And the antibacterial potentiality of zinc in clinical applications, the present study focuses on synthesis of Zn-Ws particles and evaluation of its antimicrobial and wound healing potentialities towards skin tissue engineering applications. The compositional characterization by EDAS and FT-IR spectral analysis have substantiated the presence of major elements and corresponding band stretching associated with the synthesized particles whereas the particles morphology by SEM images have shown the size of the Ws and Zn-Ws to be 370 nm and 530 nm respectively. From the in vitro studies, skin regenerative potential of Zn-Ws was determined on promoting fibroblast cell (NIH3T3) proliferation by providing better adhesiveness, biocompatibility and cytocompatibility. The antibacterial property of Zn-Ws evaluation by minimum inhibitory concentration (MIC) and zone of inhibition (ZOI) methods against clinical isolates of Gram +Ve and Gram -Ve bacterial strains have confirmed that the addition of Zn has diminished the bacterial growth and also helped in degrading the bacterial biofilms. Thus it is summed up that the process of wound healing is expected to occur with reduced risk of post-injury infections by the presence of zinc-doping on wollastonite for skin tissue application.

Developing a Silk Fibroin Composite Film to Scavenge and Probe H2O2 Associated with UV-Excitable Blue Fluorescence

A silk fibroin composite film that can simultaneously scavenge and probe H₂O₂ in situ was developed for possibly examining local concentrations of H₂O₂ for biomedical applications. A multi-functional composite film (GDES) that consists of graphene oxide (G), a photothermally responsive element that was blended with polydopamine (PDA, D)/horseradish peroxidase (HRP, E) (or DE complex), and then GDE microaggregates were coated with silk fibroin (SF, S), a tyrosine-containing protein. At 37 °C, the H₂O₂-scavenging ability of a GDES film in solution at approximately 7.5 × 10^-3 μmol H₂O₂/mg film was the highest compared with those of S and GS films. The intensities of UV-excitable blue fluorescence of a GDES film linearly increased with increasing H₂O₂ concentrations from 4.0 μM to 80 μM at 37 °C. Interestingly, after a GDES film scavenged H₂O₂, the UV-excitable blue fluorescent film could be qualitatively monitored by eye, making the film an eye-probe H₂O₂ sensor. A GDES film enabled to heat H₂O₂-containing samples to 37 °C or higher by the absorption of near-IR irradiation at 808 nm. The good biocompatibility of a GDES film was examined according to the requirements of ISO-10993-5. Accordingly, a GDES film was developed herein to scavenge and eye-probe H₂O₂ in situ and so it has potential for biomedical applications.

Effects of PEGylation on capture of dextran-coated magnetic nanoparticles in microcirculation

BACKGROUND

Magnetic nanoparticles (MNPs) can be localized against hemodynamic forces in blood vessels with the application of an external magnetic field. In addition, PEGylation of nanoparticles may increase the half-life of nanocomposites in circulation. In this work, we examined the effect of PEGylation on the magnetic capture of MNPs in vivo.

METHODS

Laser speckle contrast imaging and capillaroscopy were used to assess the magnetic capture of dextran-coated MNPs and red blood cell (RBC) flow in cremaster microvessels of anesthetized rats. Magnetic capture of MNPs in serum flow was visualized with an in vitro circulating system. The effect of PEGylation on MNP-endothelial cell interaction was studied in cultured cells using an iron assay.

RESULTS

In microcirculation through cremaster muscle, magnet-induced retention of 250 nm MNPs was associated with a variable reduction in RBC flow, suggesting a dynamic coupling of hemodynamic and magnetic forces. After magnet removal, faster restoration of flow was observed in PEG(+) than PEG(-) group, which may be attributed to a reduced interaction with vascular endothelium. However, PEGylation appears to be required for magnetic capture of 50 nm MNPs in microvessels, which was associated with increased hydrodynamic diameter to 130±6 nm in serum, but independent of the ς-potential.

CONCLUSION

These results suggest that PEGylation may enhance magnetic capture of smaller MNPs and dispersion of larger MNPs after magnet removal, which may potentially affect the targeting, pharmacokinetics and therapeutic efficacy.

Multifunctional PLGA-based nanoparticles as a controlled release drug delivery system for antioxidant and anticoagulant therapy

Background

Ischemia/reperfusion (I/R) injury causes the generation of many ROS such as H₂O₂ and leads to vascular thrombosis, which causes tissue damage.

Purpose

In this investigation, poly (lactideco-glycolide) (PLGA)-based nanoparticles are used for their anticoagulant and antioxidant properties in vascular therapy.

Methods

Both heparin and glutathione are entrapped on PLGA-stearylamine nanoparticles by layer-by-layer interactions.

Results

The drug release rate is successfully controlled with only 10.3% of the heparin released after 96 hours. An H₂O₂-responsive platform is also developed by combining silk fibroin and horse peroxidase to detect H₂O₂ in this drug delivery system. Besides, hyaluronic acid was decorated on the surface of nanoparticles to target the human bone marrow mesenchymal stem cells (hBMSCs) for cell therapy. The results of an in vitro study indicate that the nanoparticles could be taken up by hBMSCs within 2 hours and exocytosis occurred 6 hours after cellular uptake.

Conclusion

We propose that the multifunctional nanoparticles that are formed herein can be effectively delivered to the site of an I/R injury via the hBMSC homing effect. The proposed approach can potentially be used to treat vascular diseases, providing a platform for hBMSCs for the controlled delivery of a wide range of drugs.

Surface-modified polymers for cardiac tissue engineering

Cardiovascular disease (CVD), leading to myocardial infarction and heart failure, is one of the major causes of death worldwide. The physiological system cannot significantly regenerate the capabilities of a damaged heart. The current treatment involves pharmacological and surgical interventions; however, less invasive and more cost-effective approaches are sought. Such new approaches are developed to induce tissue regeneration following injury. Hence, regenerative medicine plays a key role in treating CVD. Recently, the extrinsic stimulation of cardiac regeneration has involved the use of potential polymers to stimulate stem cells toward the differentiation of cardiomyocytes as a new therapeutic intervention in cardiac tissue engineering (CTE). The therapeutic potentiality of natural or synthetic polymers and cell surface interactive factors/polymer surface modifications for cardiac repair has been demonstrated in vitro and in vivo. This review will discuss the recent advances in CTE using polymers and cell surface interactive factors that interact strongly with stem cells to trigger the molecular aspects of the differentiation or formulation of cardiomyocytes for the functional repair of heart injuries or cardiac defects.

Proteomic Profiling of Neuroblastoma Cells Adhesion on Hyaluronic Acid-Based Surface for Neural Tissue Engineering

The microenvironment of neuron cells plays a crucial role in regulating neural development and regeneration. Hyaluronic acid (HA) biomaterial has been applied in a wide range of medical and biological fields and plays important roles in neural regeneration. PC12 cells have been reported to be capable of endogenous NGF synthesis and secretion. The purpose of this research was to assess the effect of HA biomaterial combining with PC12 cells conditioned media (PC12 CM) in neural regeneration. Using SH-SY5Y cells as an experimental model, we found that supporting with PC12 CM enhanced HA function in SH-SY5Y cell proliferation and adhesion. Through RP-nano-UPLC-ESI-MS/MS analyses, we identified increased expression of HSP60 and RanBP2 in SH-SY5Y cells grown on HA-modified surface with cotreatment of PC12 CM. Moreover, we also identified factors that were secreted from PC12 cells and may promote SH-SY5Y cell proliferation and adhesion. Here, we proposed a biomaterial surface enriched with neurotrophic factors for nerve regeneration application.

Activation of the ubiquitin proteasome pathway by silk fibroin modified chitosan nanoparticles in hepatic cancer cells

Silk fibroin (SF) is a protein with bulky hydrophobic domains and can be easily purified as sericin-free silk-based biomaterial. Silk fibroin modified chitosan nanoparticle (SF-CSNP), a biocompatible material, has been widely used as a potential drug delivery system. Our current investigation studied the bio-effects of the SF-CSNP uptake by liver cells. In this experiment, the characterizations of SF-CSNPs were measured by particle size analysis and protein assay. The average size of the SF-CSNP was 311.9 ± 10.7 nm, and the average zeta potential was +13.33 ± 0.3 mV. The SF coating on the SF-CSNP was 6.27 ± 0.17 μg/mL. Moreover, using proteomic approaches, several proteins involved in the ubiquitin proteasome pathway were identified by analysis of differential protein expressions of HepG2 cell uptake the SF-CSNP. Our experimental results have demonstrated that the SF-CSNP may be involved in liver cancer cell survival and proliferation.

Adenosine diphosphate-decorated chitosan nanoparticles shorten blood clotting times, influencing the structures and varying the mechanical properties of the clots

Chitosan nanoparticles (NPs) decorated with adenosine diphosphate (ADP) (ANPs) or fibrinogen (FNPs) were used to fabricate hemostatic NPs that can shorten blood clotting time and prevent severe local hemorrhage. The structure and mechanical properties of the blood clot induced with ANP (clot/ANP) or FNP (clot/FNP) were also investigated. The NPs, ANPs, and FNPs, which had particle sizes of 245.1±14.0, 251.0±9.8, and 326.5±14.5 nm and zeta potentials of 24.1±0.5, 20.6±1.9, and 15.3±1.5 mV (n=4), respectively, were fabricated by ionic gelation and then decorated with ADP and fibrinogen. The zeta potentials and Fourier transform infrared (FTIR) spectroscopy of the NPs confirmed that their surfaces were successfully coated with ADP and fibrinogen. The scanning electron microscope (SEM) micrographs of the structure of the clot induced with “undecorated” chitosan NPs (clot/NP), clot/ANP, and clot/FNP (at 0.05 wt%) were different, after citrated bloods had been recalcified by a calcium chloride solution containing NPs, ANPs, or FNPs. This indicated that many NPs adhered on the membrane surfaces of red blood cells, that ANPs induced many platelet aggregates, and that FNPs were incorporated into the fibrin network in the clots. Measurements of the blood clotting times (Tc) of blood clot/NPs, clot/ANPs, and clot/FNPs, based on 90% of ultimate frequency shifts measured on a quartz crystal microbalance (QCM), were significantly (P<0.05) (n=4) shorter than that of a clot induced by a phosphate-buffered solution (PBS) (clot/PBS) (63.6%±3.1%, 48.3%±6.2%, and 63.2%±4.7%, respectively). The ΔF₂ values in the spectra of frequency shifts associated with the propagation of fibrin networks in the clot/ANPs and clot/FNPs were significantly lower than those of clot/PBS. Interestingly, texture profile analysis of the compressional properties showed significantly lower hardness and compressibility in clot/NPs and clot/ANPs (P<0.05 or better) (n=4) compared with clot/PBS and clot/FNPs. Accordingly, among the hemostatic NPs, ANP substantially reduced blood clotting times, ΔF₂ values, and compression flow properties of the clot. Hence, ANPs have potential applications for preventing severe local hemorrhage.

Determining early adhesion of cells on polysaccharides/PCL surfaces by a quartz crystal microbalance

The early adhesions of cells to various biopolymers are important to their growths and proliferations. Here, the adhesion of cells (e.g., fibroblasts) on the electrode of a quartz crystal microbalance (QCM) that was coated by PCL or PEG/PCL and further adsorbed by chitosan (CS) or CS/hyaluronic acid (HA) layers, was examined by cell-counting technique, QCM method and MTS assay under a serum-free condition for 3 h. The surfaces on electrodes of the QCM were confirmed to have been modified by measuring their contact angles, FT-IR spectra and the weights of biopolymers affected the frequency shifts of the QCM. Among tested surfaces on electrodes, the adhesion of fibroblasts on a HA/CS/PCL surface was the most (e.g., 3.08 × 10(5) cells/cm(2)) while that on a PEG/PCL surface was the least (e.g., 0.7 × 10(5) cells/cm(2)), as determined by cell-counting technique. The frequency shift and the mass of adhering fibroblasts on HA/CS/PCL electrodes were -3,537 ± 770 Hz and 3.78 ± 0.22 μg (n = 3), respectively, that were significantly exceeded those on other electrodes (-393 ± 58 Hz and 0.32 ± 0.06 μg, n = 3, respectively, for PEG/PCL electrodes). These results were consistent with cell-counting technique. Although MTS assay yielded similar results, it was less sensitive than the two aforementioned methods. In conclusion, modified electrodes of a QCM provide a convenient and sensitive method for examining the early adhesion of cells (e.g., 3 h) to biopolymer surfaces.

Cardiac repair using chitosan-hyaluronan/silk fibroin patches in a rat heart model with myocardial infarction

The cardiac repair of myocardial infarction (MI) hearts of rats using chitosan-hyaluronan/silk fibroin (chitosan-HYA/SF) cardiac patches was examined after eight weeks of implantation. Rats with implantations of chitosan-HYA/SF patches (CHS group) significantly (P<0.05) reduced the dilation of the inner diameter of left ventricle (LV) (4.27 ± 0.29 mm), increased wall thickness of LV (1.5 ± 0.13 mm) and improved the fractional shortening of LV of hearts (LVFS) (42.8 ± 2.4%) compared with those values of LVs of rats without implants (MI group) (e.g., 5.92 ± 0.39 mm, 1.2 ± 0.06 mm and 31.5±1.4%, respectively). Moreover, blood vessel-like structures in MI regions of LVs in the CHS group were widely distributed while none was found in the MI group. The CHS group significantly improved the secretion of paracrine factors, such as VEGF in the MI regions of LVs (P<0.05, n=4), relative to that in the MI group. In conclusion, chitosan-HYA/SF cardiac patches are promising biomaterials for the cardiac repair of MI rat hearts.

Assessing the responses of cellular proteins induced by hyaluronic acid-modified surfaces utilizing a mass spectrometry-based profiling system: over-expression of CD36, CD44, CDK9, and PP2A

The cell responses to biopolymer surface at the early adhesion stages can be critical for cell survival. The purpose of this research was to assess formation of hyaluronic acid (HA) biopolymer surface, the fibroblasts were used as an experimental model to evaluate the responses of cellular proteins induced by biopolymer materials using a mass spectrometry-based profiling system. Surfaces were covered by multi-walled carbon nanotubes (CNT), chitosan (CS), and HA to increase the surface area, enhance the adhesion of biopolymer and promote the rate of cell proliferation. The amount of adhered fibroblasts on CNT/CS/HA electrodes of quartz crystal microbalance (QCM) were greatly exceeded those on other surfaces that were consistent with cell-count technique. Moreover, analyzing differential protein expressions of adhered fibroblasts on those biopolymer surfaces by proteomic approaches identified CD36, CD44, PP2A, and CDK9 as key proteins. To validate the influences of those four proteins on adhesions of fibroblasts on biopolymers, the cells were blocked by antibodies of the proteins and the adhesions of cells on the tested biopolymer surfaces were examined using a QCM technique, flow cytometric analysis and morphological observations. The results of significantly decreasing the weights and densities of the blocked fibroblasts adhering to CNT/CS/HA surfaces were obtained, and validate those proteins found by proteomic approaches. Utilizing mass spectrometry-based proteomics to evaluate cell adhesions on biopolymers is proposed.

Activity-dependent neuroprotector homeobox protein: A candidate protein identified in serum as diagnostic biomarker for Alzheimer's disease

Alzheimer's disease (AD) is the most common cause of dementia of late life. To enhance our understanding of AD proteome, the serum proteins were analyzed using two-dimensional gel electrophoresis (2DE) combined with nano-high performance liquid chromatography electrospray ionization tandem mass spectrometry (nano-HPLC-ESI-MS/MS) followed by peptide fragmentation patterning. In this study, six protein spots with differential expression were identified. Five up-regulated proteins were identified as actin, apolipoprotein A-IV (Apo A-IV), inter-alpha-trypsin inhibitor heavy chain H4 (ITIH4), alpha-1-antitrypsin (AAT), and antithrombin-III (AT-III); one protein, activity-dependent neuroprotector homeobox protein (ADNP) was down-regulated in AD patients. These proteins with differential expression in the serum may serve as potential indicators of AD. Our results suggested that ADNP may play an important role in slowing the progression of clinical symptoms of AD.

Urinary protein profiling by liquid chromatography/tandem mass spectrometry: ADAM28 is overexpressed in bladder transitional cell carcinoma

Bladder cancer is the most common urological cancer with higher incidence rate in the endemic areas of Blackfoot disease (BFD) in southern Taiwan. The aim of this study was to utilize the proteomic approach to establish urinary protein patterns of bladder cancer. The experimental results showed that most patients with bladder cancer had proteinuria or albuminuria. The urine arsenic concentrations of bladder cancer patients in BFD areas were significantly higher than those patients from non-BFD areas. In the proteomic analysis, the urinary proteome was identified by nano-high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (nano-HPLC/ESI-MS/MS) followed by peptide fragmentation pattern analysis. We categorized 2782 unique proteins of which 89 proteins were identified with at least three unique matching peptide sequences. Among these 89 proteins, thirteen of them were not found in the control group and may represent proteins specific for bladder cancer. In this study, three proteins, SPINK5, ADAM28 and PTP1, were also confirmed by Western blotting and showed significant differential expression compared with the control group. ADAM28 may be used as a possible biomarker of bladder cancer.

Characterization of ADAM28 as a biomarker of bladder transitional cell carcinomas by urinary proteome analysis

Human urine contains a large number of proteins and peptides (the urinary proteome). Global analysis of the human urinary proteome is important for understanding urinary tract diseases. Bladder cancer is the most common urological cancer with higher incidence rates in endemic areas of Blackfoot disease (BFD) in southern Taiwan. The aim of this study was to use the proteomic approach to establish urinary protein biomarkers of bladder cancer. ADAM28, identified by proteomic approaches and confirmed by Western blotting, showed significant differences compared with normal individuals, so it may be a biomarker of bladder cancer.

Characterization of surface modification on self-assembled monolayer-based piezoelectric crystal immunosensor for the quantification of serum α-fetoprotein

Self-assembled monolayers (SAMs) on coinage metallic material can provide versatile modeling systems for studies of interfacial electron transfer, biological interactions, molecular recognition and other interfacial phenomena. Recently, a bio-sensing system has been produced by analysis of the attachment of antibody using alkanethiols, to form SAMs on the face of Au-quartz crystal microbalance (QCM) surfaces. In this study, the attachment of anti-α-fetoprotein monoclonal antibody to a SAMs surface of 11-mercaptoundecanoic acid was achieved using water-soluble N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide hydrochloride and N-hydroxysuccinimide as coupling agents. Surface analyses were utilized by X-ray photoelectron spectroscopy and atomic force microscopy. The quantization of immobilized antibody was characterized by the frequency shift of QCM and the radioactivity change of ¹²⁵I labeled antibody. The limit of detection and linear range of the calibration curve of the QCM method were 15 ng/ml and 15-850 ng/ml. The correlation coefficients of α-fetoprotein concentration between QCM and radioimmunoassay were 0.9903 and 0.9750 for the standards and serum samples, respectively. This report illustrates an investigation of SAMs for the preparation of covalently immobilized antibody biosensors.

Silk fibroin/chitosan-hyaluronic acid versus silk fibroin scaffolds for tissue engineering: promoting cell proliferations in vitro

The feasibility of silk fibroin protein (SF) scaffolds for tissue engineering applications to promote cell proliferation has been demonstrated, as well as the ability to mimic natural extra-cellular matrix (ECM), SF/chitosan (CS), a polysaccharide, scaffolds for tissue engineering. However, the response of cells to SF/CS-hyaluronic acid (SF/CS-HA) scaffolds has not been examined, which this study attempts to do and then compares those results with those of SF scaffolds. SF/CS-HA microparticles were fabricated to produce scaffolds in order to examine the proliferations of human dermal fibroblasts (HDF) in the scaffolds. Positive zeta potentials and ATR-FTIR spectra confirmed the co-existence of SF and CS-HA in SF/CS-HA microparticles. HDF proliferated well and migrated into SF/CS-HA scaffolds for around 160 mum in depth, as well as those in SF scaffolds after 7 days of cultivation, as observed using confocal microscopy. Interestingly, HDF grown in SF/CS-HA scaffolds had a markedly higher cell density than that in SF ones. Additionally, MTT assay revealed that the growth rates of HDF in SF/CS-HA scaffolds significantly exceeded (P < 0.01, n = 5) those in scaffolds of SF and SF/CS. The daily glucose consumptions and lactate formations, metabolic parameters, of HDF grown in SF/CS-HA and SF/CS scaffolds were significantly higher (P < 0.01, n = 3) than those in SF ones in most culturing days. Results of this study suggest that SF/CS-HA scaffolds have better cell responses for tissue engineering applications than SF ones.

Enhancing growth and proliferation of human gingival fibroblasts on chitosan grafted poly (epsilon-caprolactone) films is influenced by nano-roughness chitosan surfaces

The bioactivity of poly (epsilon-caprolactone) (PCL) films is improved by grafting chitosan (CS) surfaces with various values of nano-roughness on PCL surfaces. To examine the effects of the design, growing human gingival fibroblasts (HGFs) on the films was conducted. Various values of nano-rough CS surfaces were cast using nano-rough PCL molds that had been fabricated using a solvent-etched technique. The features of nano-CS/PCL surfaces were characterized using an atomic force microscope (AFM) to observe the topography and to determine the value of centerline average roughness of a surface, R(a). The R(a) values of the nano-CS/PCL films were 36.8 +/- 1.6, 100.0 +/- 3.0, and 148 +/- 7.0 nm, while that of the smooth CS/PCL film was 12.5 +/- 1.6 nm. The growth and proliferation of HGFs on the films are elucidated by fluorescent staining and analyzed by MTT viability assay following three and 7 days of culture. The viability assay of the cells reveals that the growth rates of HGFs on both CS/PCL and nano-CS/PCL films significantly exceed (95% or more; P < 0.001) those of PCL on both days, demonstrating the improvement of the bioactivity of PCL films by grafting CS. Additionally, the growth rates and proliferations of HGFs on nano-CS/PCL films of roughness 100 and 148 nm markedly exceed (15% or more; P < 0.001) those on 36.8 nm nano-CS/PCL and CS/PCL films, after both periods of culturing, indicating that the high nano-roughness CS surfaces further enhance the growth rate of HGFs. In conclusion, markedly improving the bioactivity of PCL films by grafting CS is demonstrated. Moreover, high nano-roughness of nano-CS/PCL films can further accelerate the growth and proliferation of HGFs compared with those of CS/PCL films. This work presents a new concept for designing biomaterials in tissue engineering.

Different ratios of lactide and glycolide in PLGA affect the surface property and protein delivery characteristics of the PLGA microspheres with hydrophobic additives

This study investigated whether the surface quantities of the additives and protein delivery characteristics for protein-loaded PLGA 85 (85:15), PLGA75 (75:25) and PLGA 50 (50:50) microspheres with hydrophobic additives, phosphatidylcholine (PC) as a model, are affected by the different ratios of lactide and glycolide in PLGA polymers. By applying phospholipids analysis, surface PC quantities of the microspheres are 2.1 +/- 1.2, 1.2 +/- 0.3 and 1.0 +/- 0.7 Pg (n = 3) per mg of PLGA 85, PLGA 75 and PLGA 50 microspheres with PC addition, respectively, that are affected by the ratio of lactide and glycolide in PLGA. The addition of PC causes the decreased encapsulation efficiency (E.E.) of albumin of the microspheres and the decreased percentages of E.E. are negative correspondent to ratio of lactide and glycolide in PLGA (e.g. -13.5, -20.2 and -24.5% for PLGA 85, PLGA 75 and PLGA 50, respectively) compared with those without addition. The cumulative releases of albumin were influenced by the ratio of lactide and glycolide in PLGA for both PC addition and non-addition microspheres. Moreover, the additions of PC reduce the initial burst and cumulative releases of albumin of the microspheres compared with those of non-added ones. Further investigation suggests that resistant water uptake of PC added microspheres may play a role on affecting those reduced protein release behaviours. In conclusion, the different ratios of lactide and glycolide in PLGA affect the surface quantities of PC, E.E. and cumulative release profiles of albumin for the PLGA microspheres with PC addition. The results of the study may help the better practical applications for protein delivery of the microspheres with hydrophobic additives.

Effects of alginate coated on PLGA microspheres for delivery tetracycline hydrochloride to periodontal pockets

The effects of alginate coated on tetracycline (Tc) loaded poly (D, L-lactic-co-glycolic acid) (PLGA) microspheres fabricated by double emulsion solvent evaporation technique for local delivery to periodontal pocket were investigated. Alginate coated PLGA microspheres showed smoother surface but enlarged their particle sizes compared with those of uncoated ones. In addition, alginate coated microspheres enhanced Tc encapsulation efficiency (E.E.) from 11.5 +/- 0.5% of uncoated ones to 17.9 +/- 0.5%. Moreover, all of the coated PLGA microspheres even fabricated at different conditions could prolong Tc release from 9-12 days with 50% or higher in cumulative release of Tc compared with those of uncoated ones. The swelling ratios of PLGA microspheres for alginate coated or uncoated ones, one of the possible mechanisms for enhancing Tc release for the coated ones, were measured. The results showed that 20% or higher in swelling ratio for the coated microspheres at the earlier stage of hydration (e.g. < or = 24 h) could be an important factor to result in high Tc release compared to the uncoated ones. In conclusion, alginate coated Tc loaded PLGA microspheres could enhance Tc delivery to periodontal pocket by enhancing drug encapsulated efficiency, released quantities and sustained release period compared with uncoated ones.

Liposomes/chitosan scaffold/human fibrin gel composite systems for delivering hydrophilic drugs--release behaviors of tirofiban in vitro

A new liposomes/chitosan scaffold/human fibrin gel composite system (LCSHFG), as a depot drug delivery system, was developed to deliver low-molecular weight hydrophilic drugs. An antithrombosis drug, Tirofiban, was used as a model drug. Human fibrin gels encapsulated Tirofiban loaded liposomes were formed within chitosan scaffolds to configure the LCSHFG. The in vitro release behaviors of Tirofiban from LCSHFG were studied by characterizing the constituents of LCSHFG. The results show that the release periods of Tirofiban from LCSHFG with 50 microm pores in the chitosan scaffolds are generally 20% or longer more than those with 200 microm pores. The following results were obtained for the system that comprised 50 microm pores. The release periods of Tirofiban from LCSHFG loaded with stearylamine (SA)-liposomes can sustain 20% longer and significantly less burst release (p < 0.01, n = 3) than with liposomes. The release profiles of Tirofiban from LCSHFG change markedly when 0.5 and 2.5% glutaraldehyde is used to cross-link the system. Additionally, for all liposomes, the release periods of Tirofiban from cross-linked LCSHFG with 2.5% glutaraldehyde are 40% or more longer time (e.g., 19 days) with significantly less burst release (p < 0.01, n = 3) than those of noncrosslinked LCSHFG. Notably, the bioactivity of released Tirofiban from LCSHFG that is crosslinked by 2.5% glutaraldehyde effectively inhibits adenosine diphosphate inducing platelet aggregation. The work also suggests that LCSHFG may have potential as a depot drug delivery system for low-molecular-weight hydrophilic drugs.

Mechanical properties of microwave hydrothermally synthesized titanate nanowires

In this investigation titanate nanowires were synthesized by a microwave hydrothermal process and their nanomechanical characterization was carried out by a compression experiment via buckling instability using a nanomanipulator inside a scanning electron microscope. Nanowires of diameters 120-150 nm and length tens of microns can be synthesized by keeping a commercial nanoparticle inside a microwave oven at 350 W and 210 °C for 5 h. The nanowire was clamped between two cantilevered AFM tips attached to two opposing stages of the manipulator for nanomechanical characterization. The elasticity coefficients of the titanate nanowires were measured by applying a continuously increasing load and observing the buckling instability of the nanowires. The buckling behavior of a nanowire was analyzed from the series of SEM images of displacement of the cantilever attached to the nanowire due to application of load. The critical loads for different sized titanate nanowires were determined and their corresponding Young's modulus was computed with the Euler pinned-fixed end model. The Young's modulus of these microwave hydrothermal process synthesized titanate nanowires were determined to be approximately in the range 14-17 GPa. This investigation confirms the capability of the nanomanipulator via the buckling technique as a constructive device for measuring the mechanical properties of nanoscale materials.

Development of a simple and rapid immunochromatographic strip test for diarrhea-causative porcine rotavirus in swine stool

A rapid and simple immunochromatography (IC) strip test, for specific detection of porcine rotavirus (PRV) in stool specimen, was developed. Monoclonal antibodies (mAbs) to the OSU strain of PRV have been produced in mice. Among them, two hybridoma clones that generate mAb-1 and mAb-2, respectively, specific for VP6 protein of PRV, have been selected. In the IC configuration, mAb-1, one of the selected mAbs was used to the designed coat microparticles (MP), while another mAb-2 was used to fix it on the nitrocellulose membrane strip to form a result line. The control line was formed on the same membrane strip past the result line by fixing anti-mouse IgG antibody. The IC test was capable of detecting 1000 plaque-forming units of PRV/ml in less than 5min, and the binding capacity was demonstrated by specific recognition of PRV only, but not other porcine diarrhea viruses, transmissible gastroenteritis virus (TGEV) and porcine epidemic diarrhea virus (PEDV). The IC test produced positive results with all the nine PRV-positive stool specimens and negative results with five different non-PRV specimens, which were identified previously by the polymerase chain reaction (PCR) test, respectively. The results indicate an excellent concordance between the two methods, suggesting a potential application of the three combinated IC tests (PRV, TGEV and PEDV) for the on-site, rapid screening of porcine diarrhea cases.

Characterizing poly(epsilon-caprolactone)-b-chitooligosaccharide-b-poly(ethylene glycol) (PCP) copolymer micelles for doxorubicin (DOX) delivery: effects of crosslinked of amine groups

New amine-groups containing tri-block copolymers and micelles that consisting of poly(epsilon-caprolactone)-b-chitooligosaccharide-b-poly(ethylene glycol) (PCL-b-COS-b-PEG, PCP), were synthesized, characterized, and evaluated for delivering doxorubicin (DOX) with or without crosslinked amine groups by genipin. The characteristics of the PCP copolymers of Fourier-transform infrared spectrometry (FT-IR) verify the amine and ester groups of the COS and the PCL of the copolymers, respectively. 1H nuclear magnetic resonance (1H NMR) spectra verify the structures of the PCP copolymers consisting two PCL and PEG polymers reacted onto the COS block. In addition, gel permeation chromatography (GPC) determines the number average molecular weight of the tri-block copolymers (Mn) of approximately 11340 Da/mole. The PCP copolymers can self-assemble to form polymeric micelles at the critical micelle concentration (CMC) of 1.0 microM as determined by the UV-VIS absorption spectra. The mean diameter of the PCP micelles is 90 nm, as determined using a dynamic light-scattering (DLS) analyzer. Moreover, the zeta potentials of PCP micelles change from neutral to cationic state when pH of suspension mediums varied from 7.4 to 3.0. For evaluating delivery characteristics of hydrophobic DOX, it was loaded into PCP micelles with or without crosslinked by genipin. The burst release and release period of DOX for the crosslinked micelles are significantly reduced (P < 0.003, n = 3, for pH = 7.4) and sustained (e.g., 8 days), respectively, than those non-crosslinked ones (e.g., 4 days). In conclusion, new tri-block amine groups containing PCP copolymers are synthesized that can self-assemble as PCP micelles. After post-crosslinked amine groups of DOX loaded the micelles, they can effectively reduce the burst release and sustain the release of DOX at different pH dissolution mediums. Further applications of PCP copolymers and micelles for drug delivery can be explored in future.

A fibrin encapsulated liposomes-in-chitosan matrix (FLCM) for delivering water-soluble drugs. Influences of the surface properties of liposomes and the crosslinked fibrin network

A depot drug delivery system, fibrin encapsulated liposome-in-chitosan matrix (FLCM), has been developed to deliver a water-soluble drug which is configured by a porous chitosan matrix containing a bovine fibrin network encapsulated different surface properties of liposomes. Quinacrine (QR), a water-soluble, low-molecular weight fluorescent marker, is used as a model drug to evaluate the delivery characteristics of the system. The SEM photographs show that the fibrin network adheres to the surfaces and pores of the chitosan matrix of a FLCM system. The QR release periods of the FLCM are sustained for about four times longer than those of QR encapsulated into the liposomes. However, the QR release periods and profiles of the FLCM are influenced by the surface properties of liposomes. The release of QR from FLCM is sustained for 9 days for neutral liposomes and only 5 days for PEG modified liposomes (PEG-liposome). After crosslinking the fibrin network of the FLCM with 0.5% of glutaldehyde, the release of QR is further sustained for 17 days with good linear profiles (e.g., 13 days) and with 50% of reduced burst release compared with those of without crosslinking, indicating that the stability of the fibrin network plays an important role on QR release of the system. More interestingly, the release periods and profiles of QR of the FLCM system are highly similar to those of Tirofiban, low-molecular weight of a water-soluble clinical cardiovascular drug, although the study has been done by human platelet poor plasma instead of bovine fibrinogen as a source of fibrin network. It suggests that the QR is a suitable model for investigating the drug delivery behaviors for water-soluble, low-molecular weight drugs of the FLCM. In conclusion, with QR as a model drug, FLCM with crosslinked fibrin network can effectively sustain the release of QR for 17 days but the release profiles are influenced by the surface properties of encapsulated liposomes. This study suggests that FLCM may have the potential as a depot drug delivery system for water-soluble drugs.

Poly (e-caprolactone) Grafted With Nano-structured Chitosan Enhances Growth of Human Dermal Fibroblasts

Polyester films are modified with their bioactivity for tissue engineering by grafting a nano-structured bioactive material, nano-structured chitosan (nano-CS), on a model polymer, poly (epsilon-caprolactone) (PCL). The nano-CS was duplicated using a solvent-etched PCL mold and then grafted onto PCL using a selected solvent. The structure of the nano-CS/PCL surface was characterized using an atomic force microscope to observe the topography and determine the roughness. The centerline average roughness, Ra, of the surface of the nano-CS/PCL film is 106.0+/-4.0 nm whereas that of the surface of the CS-grafted PCL film (CS/PCL) is 3.6+/-0.4 nm. The latter is therefore very smooth. CS is known to swell following hydration, so the Ra values were determined again after immersion for 12 h in phosphate buffered saline. Although the centerline average roughness of the nano-CS/PCL was lower, it still markedly exceeded that of the CS/PCL film. Cells grown on nano-CS/PCL, CS/PCL, nano-structured PCL (nano-PCL), and PCL films were observed by fluorescent staining and analyzed by MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide) viability assay following 3 and 7 days of culture, to evaluate the effects of the design on the growth of fibroblasts. The viability assay of the cells reveals that the growth rate of cells on both CS/PCL and nano-CS/PCL films significantly exceeds (P<0.001) those of PCL and nano-PCL films on both cultural days. Additionally, the growth rate and proliferation of fibroblasts on nano-CS/PCL films significantly exceed (P<0.001) those on CS/PCL films after both periods of culturing, suggesting that the bioactive surface following a nano-structured treatment promotes the growth rate of cells. However, nano-PCL films do not have the same effects as nano-CS/PCL films do. In conclusion, a novel biomaterial, nano-CS/PCL, is developed by grafting a nano-structured bioactive surface, CS, onto the PCL surface to promote the the growth rate of fibroblasts. This work elucidates a new concept for designing films or scaffolds for tissue engineering-the grafting of nano-structured bioactive biomaterials to the films or scaffolds to promote the growth of cells.

Enhancing growth human endothelial cells on Arg-Gly-Asp (RGD) embedded poly (?-caprolactone) (PCL) surface with nanometer scale of surface disturbance

To explore the application of PCL for the engineering of soft tissues, the PCL surface was first embedded in an amphiphilic moiety and then grafted with RGD peptide to enhance the growth rate of human endothelial cells (HUVEC) on the surface. To graft cell-adhesive peptide RGD on the PCL surface, the PCL surface was first etched by the selected solvent with only nanometer-scale of surface disturbance, and simultaneously embedded with DSPE-PEG [di-stearoyl-phosphatidyl-ethanolamine-methoxy-poly (ethylene glycol)] moiety. Then the PCL-PEG surface was photochemically grafted by GRGD to form PCL-PEG-RGD surface. PCL and the modified surfaces were characterized by surface morphology, surface disturbance, contact angles, ATR-FTIR functional group analysis, and the growth rate of HUVEC. The surface disturbances of PCL and the modified surfaces were examined by atomic force microscope (AFM) and presented by the topography and a roughness parameter, Ra. The Ra values were 16.4 +/- 3.0, 34.8 +/- 1.6, and 12.8 +/- 0.3 nm (n = 3) for PCL, PCL-PEG, and PCL-PEG-RGD surfaces, respectively. The topographies of the surfaces and Ra values indicated that the PCL modified technique developed by this study resulted in only nanometer scale of surface disturbance. In addition to reducing surface disturbances, reducing contact angle from 73.7 degrees +/- 0.4 (n = 3) for the PCL surface to 56.9 degrees +/- 4.0 (n = 3) for the PCL-PEG surface, and the ATR-FTIR transmission spectra at 1660 cm(-1) for shoulder of amine I of PCL-PEG-RGD surface both confirmed the successful modification of PCL surfaces. HUVECs adhered well and grew on the PCL-PEG-RGD surface after 36 h incubation, whereas other surfaces did not support growth. Moreover, the viability for the relative growth rate of HUVECs on the PCL-PEG-RGD surface analyzed by MTT assay showed 8.5 times greater growth than that of the unmodified one. In conclusion, a PCL-PEG-RGD surface for enhancing the growth rate of HUVECs has been prepared by a new technique that caused only a nanometer-scale of surface disturbance. This technique and the PCL-PEG-RGD surface could be further applied to engineer soft tissues.

Enhancement of the growth of human endothelial cells by surface roughness at nanometer scale

This study investigated whether a nanometer scale of surface roughness could improve the adhesion and growth of human endothelial cells on a biomaterial surface. Different molecular weights or chain lengths of polyethylene glycol (PEG) were mixed and then grafted to a polyurethane (PU) surface, a model smooth surface, to form a nanometer (nm) scale of roughness for PU-PEG surfaces (PU-PEG(mix)) while PEG with a molecular weight of 2000 was also grafted to PU to form PU-PEG(2000) for comparison. In addition, the concept was tested on cell-adhesive peptide Gly-Arg-Gly-Asp (GRGD) that was photochemically grafted to PU-PEG(mix) and PU-PEG(2000) surfaces (e.g., PU-PEG(mix)-GRGD and PU-PEG(2000)-GRGD surfaces, respectively). To prepare GRGD-grafted PU-PEG(mix) and PU-PEG(2000) surface, 0.025M of GRGD-SANPAH (N-Succinimidyl-6-[4'-azido-2'-nitrophenylamino]-hexanoate) solutions was grafted to PU-PEG(mix) and PU-PEG(2000) by surface adsorption of the peptide and subsequent ultraviolet (UV) irradiation for photoreaction. The grafting efficiencies for GRGD to PU-PEG(mix) and PU-PEG(2000) surfaces were about 67% for both surfaces, semi-quantitatively analyzed by an HPLC. The surface roughness, presented with a roughness parameter, R(a), and the topography of the tested surfaces were both measured and imaged by an atomic force microscope (AFM). Among the R(a) values of the films, PU was the smoothest (e.g., R(a)=1.53+/-0.20 nm, n=3) while PU-PEG(mix) was the roughest (e.g., R(a)=39.79+/-10.48 nm, n=4). Moreover, R(a) values for PU-PEG(mix) and PU-PEG(mix)-GRGD surfaces were about 20 nm larger than those for PU-PEG(2000) and PU-PEG(2000)-GRGD, respectively, which were consistent with the topographies of the films. Human umbilical vein endothelial cells (HUVECs) were adhered and grown on the tested surfaces after 36 h of incubation. Among the films, HUVEC's adhesion on the surface of PU-PEG(mix)-GRGD was the densest while that on the surface of PU-PEG(2000) was the sparsest. Also, the adhesion and growth of HUVECs for the roughness surfaces were statistically significantly better than that of smooth surface for both GRGD grafted and un-grafted surfaces, respectively. The viability for the growth of HUVECs on the tested surfaces analyzed by MTT assay also confirmed the efficacy of the increased surface roughness. In conclusion, increased surface roughness of biomaterial surfaces even at 10-10(2) nm scale could enhance the adhesion and growth of HUVECs on roughness surfaces that could be useful for applications of tissue engineering.

Release of ciprofloxacin from poloxamer-graft-hyaluronic acid hydrogels in vitro

Recently, in situ gel formation has extensively been studied to enhance ocular bioavailability and duration of the drug activity. In this study, we report grafting of poloxamer onto the hyaluronic acid for application of tissue engineering oriented ophthalmic drug delivery system. Graft copolymers were prepared by coupling mono amine-terminated poloxamer (MATP) with hyaluronic acid (HA) backbone using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxylsuccinimide (NHS) as coupling agents. The coupling of MATP with HA was clarified by 1H NMR and FT-IR spectroscopy. The gelation temperature of graft copolymers was dependent on the content of HA and the concentration of poloxamer. From drug release studies in vitro, ciprofloxacin was sustainedly released from the poloxamer-g-hyaluronic acid hydrogel due to the in situ gel formation of the copolymer and viscous properties of HA.

Growth of human endothelial cells on different concentrations of Gly-Arg-Gly-Asp grafted chitosan surface

To improve the adhesion and growth of endothelial cells on chitosan, different concentrations of cell adhesive peptide, Gly-Arg-Gly-Asp (GRGD), were photochemically grafted to its surface. After different concentrations of GRGD-SANPAH (N-Succinimidyl-6-4'-azido-2'-nitrophenylamino]-hexanoate) solutions were formed, they were grafted to chitosan surfaces by performing surface adsorption of the peptide solutions and subsequent ultraviolet (UV) irradiation to induce photoreaction. The grafted efficiency for GRGD peptide to chitosan surface was higher than 80%, as semiquantitatively analyzed by a high performance liquid chromatography (HPLC). FTIR spectra and electron spectroscopy for chemical analysis (ESCA) also confirmed that GRGD was successfully grafted to form chitosan-GRGD surfaces. For example, the composition fraction of nitrogen (N1s) for chitosan-GRGD surface grafted at 0.05 M GRGD was 6.8% instead of 3.2% for chitosan only. Human umbilical vein endothelial cells (HUVECs) adhered well and grew on different GRGD grafted concentrations of chitosan-GRGD surfaces after 36 hrs of incubation, but not on the chitosan surface. Furthermore, viability for the growth of HUVECs was increased with an increase in initial concentration of GRGD grafted chitosan-GRGD surfaces analyzed by MTT assay. In conclusion, an increased concentration of GRGD grafted on the chitosan-GRGD surface leads to more HUVECs adhered and grown on the surface.

Growth of human endothelial cells on photochemically grafted Gly-Arg-Gly-Asp (GRGD) chitosans

To improve ECs adhesion and growth on chitosan, cell adhesive peptide Gly-Arg-Gly-Asp (GRGD) was photochemically grafted to its surface. Grafting 0.025 M of GRGD-SANPAH (N-Succinimidyl-6-[4'-azido-2'-nitrophenylamino]-hexanoate) solutions to chitosan and tripolyphosphate anhydrous crosslinked chitosan (chitosan-TPP) surfaces was performed by surface adsorption of the peptide and subsequent ultraviolet (UV) irradiation for photoreaction. FTIR spectra and electron spectroscopy for chemical analysis (ESCA) confirmed that GRGD was successfully grafted to form chitosan-GRGD surfaces (e.g., the composition fraction of nitrogen (N(1s)) for chitosan-GRGD surface was 5.2% instead of 3.2% for chitosan only). Moreover, the grafting efficiencies for 0.025 M of GRGD to chitosan and chitosan-TPP surfaces were about 83% and 53%, semi-quantitatively analyzed by an HPLC. Human umbilical vein ECs were well adhered and grew on chitosan-GRGD and chitosan-TPP-GRGD surfaces after 36 h of incubation but not chitosan and chitosan-TPP ones. Moreover, the viability for the growth of ECs on the chitosan-GRGD and chitosan-TPP-GRGD surfaces analyzed by MTT assay also confirmed the efficacy of the GRGD immobilization. In conclusion, the chitosan-GRGD and chitosan-TPP-GRGD surfaces were prepared by a photochemical technique that could enhance the adhesion and growth of ECs on those surfaces for further applications for tissue engineering.

Shear stress-induced aggregation of oxidized platelets

Although shear stress-induced platelet aggregation (SIPA) has been noted, the shear stress-induced aggregation of oxidized platelets (SIOPA) has not been investigated. To investigate SIOPA, small quantity of hemoglobin (Hb) solution was first added to plasma to induce oxidation stress of platelets and then the plasma was sheared by a cone/plate viscometer at shear stress of 66 dyn/cm2. In addition, to investigate the change in expression of the membrane receptors of glycoprotein Ib (GpIb) for oxidized platelets, mean fluorescence intensity (MFI) for those platelets was detected by flow cytometric technique. The results showed that the level of the oxidation stress of platelets, as presented in malondialdehyde (MDA) values, was well correlated with the quantities of added Hb. Moreover, the aggregation of SIOPA corresponded with the levels of oxidation stress of platelets. Platelets pretreated with aspirin could only partially reduce the aggregation of SIOPA. Similarly, aspirin pretreatment could partially reduce the lowering of MFI value that indicated downexpression of GpIb receptors. Furthermore, the aggregations of SIOPA corresponded with the lowered percentage of those MFI values for studied cases. We thereby suggested that the aggregation of SIOPA is related to both the level of oxidation stress and the downexpression of GpIb receptors for oxidized platelets.

Molecular cloning and characterization of Mycobacterium bovis BCG pcp gene encoding pyrrolidone carboxyl peptidase

The Mycobacterium bovis bacilli Calmette-Guerin (BCG) pcp gene that encodes the pyrrolidone carboxyl peptidase (Pcp) was cloned from a lambdagtll genomic library and sequenced. The nucleotide sequence contains a 669 bp open reading frame coding for a protein of 222 amino acid residues with a calculated molecular mass of 23,209 Da. The deduced amino acid sequence is highly homologous to the Pcps from Bacillus amyloliquefaciens, Pseudomonas fluorescens, Bacillus subtilis, Streptococcus pyogenes, and Staphylococcus aureus. A multiple sequence alignment revealed highly conserved domains. The BCG pcp gene was overexpressed in Escherichia coli. The Pcp was purified to homogeneity. The recombinant protein was further confirmed by an enzymatic assay.