Development of chitosan nanoparticles as drug delivery systems for 5-fluorouracil and leucovorin blends

PEG-modified Fe2O3 coated agarose hydrogel: A synthesized nanocomposite for regulated 5-fluorouracil delivery

An innovative pH-responsive nanocomposite, comprising agarose (AGA) modified with polyethylene glycol (PEG) hydrogel and coated with ferric oxide (Fe2O3), has been formulated to facilitate the precise administration of 5-fluorouracil (5-Fu) to breast cancer cells. By utilizing a double emulsion technique, the size of the nanocomposites was significantly reduced through the application of almond oil; the inclusion of span 80 further improved their uniformity. The physiochemical properties of the nanocomposite were thoroughly examined by Fourier Transformed Infrared (FT-IR), X-ray diffraction (XRD), Field Emission-Scanning Electron Microscope (FE-SEM), Vibrating Sample Magnetometer (VSM), dynamic light scattering (DLS), and zeta potential tests. The verification of the uniform particle distribution was achieved by employing FE-SEM and VSM analyses. The average diameter of the particles was 223 nm, and their zeta potential was -47.6 mV. In addition, the nanocomposite exhibited a regulated release of 5-Fu at pH 5.4 and pH 7.4, as indicated by an in vitro drug release profile. PEG-AGA- Fe2O3@5-Fu exhibited biocompatibility, as indicated by the lack of deleterious effects observed in tumor cells. This revolutionary nanocomposite demonstrates exceptional promise for breast cancer treatment, underscoring its significance as a major advancement in the pursuit of novel nanotechnologies for cancer therapy.

Analytical quality by design approach to develop an eco-friendly RP-HPLC method for estimation of irbesartan in chitosan polymeric nanoparticles: forced degradation studies and assessment of in vitro release mathematical modelling

Irbesartan is an angiotensin converting enzyme blocker, primarily utilized for the management of hypertension and the mitigation of diabetic nephropathy progression. The present study introduces rapid, robust and environmentally sustainable reverse phase high performance liquid chromatography (RP-HPLC) validated under the analytical quality by design (AQbD) framework according to ICH guidelines. Utilizing a central composite design, the method's systemic optimization was achieved, ensuring reproducibility and accuracy. Chromatographic separation was accomplished utilizing an ethanol and sodium acetate buffer (60 : 40 v/v) isocratic mobile phase system on a zorbax sb C18 column, with a flow rate of at 0.6 mL min-1. Studies on forced degradation outlined stability of irbesartan and its degradation processes, enhancing our understanding of its chemical robustness under varied conditions. Complementing the green chemistry paradigm, the method's environmental impact was critically assessed, affirming its alignment with sustainability objectives. The validated method proved pivotal in determining the percent entrapment and loading efficiency of the formulated nanoparticles and holds potential for application in biological matrices. Furthermore, the encapsulation of IRB within chitosan nanoparticles was explored to assess release kinetics and enhance bioavailability. This study not only advances the analytical sciences by merging eco-friendly practices with method development but also broadens the applicative landscape of HPLC methodologies in drug delivery research.

Shellac and locust bean gum coacervated curcumin, epigallocatechin gallate nanoparticle ameliorates diabetic nephropathy in a streptozotocin-induced mouse model

Curcumin and epigallocatechin gallate have the disadvantage of low aqueous solubility and first-pass metabolism, resulting in limited bioavailability. This work aimed to enhance oral bioavailability by forming gastric pH-stable shellac nanoparticles containing curcumin and epigallocatechin gallate using locust bean gum by anti-solvent precipitation (CESL-NP). The nanoparticles were characterized by their particle size, morphology, zeta potential, gastric pH stability, release profile, drug loading, and entrapment efficiency. The findings showed that a network of hydrolyzed shellac, locust bean gum, curcumin, and epigallocatechin gallate successfully entrapped individual particles inside a complex system. The morphological investigation of the CESL-NP formulation using FESEM, TEM, and AFM revealed the presence of spherical particles. FTIR, DSC, and XRD analysis revealed that curcumin and epigallocatechin gallate were amorphous due to their bond interactions with the matrix. Streptozotocin-treated mice, upon treatment with CESL-NP, showed kidney and pancreatic improvements with normalized kidney hypertrophy index and histopathology, maintained biochemical parameters, increased beta cell count, and a 38.68-fold higher blood glucose level inhibition were observed when compared to free-(CUR + EGCG). This research affirms that the shellac-locust bean gum complex shows potential for the sustained oral delivery of curcumin and epigallocatechin gallate, specifically for treating diabetic nephropathy.

Advancements in nanoscale delivery systems: optimizing intermolecular interactions for superior drug encapsulation and precision release

Nanoscale preparations, such as nanoparticles, micelles, and liposomes, are increasingly recognized in pharmaceutical technology for their high capability in tailoring the pharmacokinetics of the encapsulated drug within the body. These preparations have great potential in extending drug half-life, reducing dosing frequency, mitigating drug side effects, and enhancing drug efficacy. Consequently, nanoscale preparations offer promising prospects for the treatment of metabolic disorders, malignant tumors, and various chronic diseases. Nevertheless, the complete clinical potential of nanoscale preparations remains untapped due to the challenges associated with low drug loading degrees and insufficient control over drug release. In this review, we comprehensively summarize the vital role of intermolecular interactions in enhancing encapsulation and controlling drug release within nanoscale delivery systems. Our analysis critically evaluates the characteristics of common intermolecular interactions and elucidates the techniques employed to assess them. Moreover, we highlight the significant potential of intermolecular interactions in clinical translation, particularly in the screening and optimization of preparation prescriptions. By attaining a deeper understanding of intermolecular interaction properties and mechanisms, we can adopt a more rational approach to designing drug carriers, leading to substantial advancements in the application and clinical transformation of nanoscale preparations. Moving forward, continued research in this field offers exciting prospects for unlocking the full clinical potential of nanoscale preparations and revolutionizing the field of drug delivery.

Multifunctional chitosan-bimetallic nanocarrier deliver 5-fluorouracil for enhanced treatment of pancreatic and triple-negative breast cancer

This work aimed to prepare multifunctional aptamer-conjugated, photothermally responsive 5-fluorouracil (5fu)-loaded chitosan-bimetallic (Au/Pd) nanoparticles (APT-CS-5fu-Au/Pd NPs) for improved cytotoxicity in two cancer cell lines (PANC-1 and MDA-MD 231). The CS-5fu-Au/Pd NPs were polydispersed with a size of 34.43 ± 1.59 nm. FTIR analysis indicated the presence of CS, 5fu in CS-5fu-Au/Pd NPs. The 2 theta degrees in CS-5fu-Au/Pd NPs accounted for CS and Au/Pd. Additionally, AGE revealed the conjugation of APT in CS-5fu-Au/Pd NPs. The APT-CS-5fu-Au/Pd NPs (180 μg/mL) with NIR treatment increased the temperature to >50 °C. The optimized 5fu input was 0.075 % in CS-5fu-Au/Pd NPs, exhibiting a hydrodynamic size of 112.96 ± 17.23 nm, DEE of 64.2 ± 3.77 %, and DLE of 11.1 ± 0.65 %. A higher level of 5fu release (69.8 ± 2.78 %) was observed under pH 5.4 at 74 h. In conclusion, NIR-APT-CS-5fu-Au/Pd NPs did not cause toxicity to RBC and Egg CAM, but increased cytotoxicity in MDA-MB 231 and PANC-1 cells by triggering oxidative stress-mediated cell death.

Transferrin functionalized poloxamer-chitosan nanoparticles of metformin: physicochemical characterization, in-vitro, and Ex-vivo studies

OBJECT

We report the preparation, characterization, and in-vitro therapeutic evaluation of Metformin-Loaded, Transferrin-Poloxamer-Functionalized Chitosan Nanoparticles (TPMC-NPs) for their repurposing in Alzheimer's disease (AD).

SIGNIFICANCE

Usefulness of this work to establish the repurposing of metformin for the treatment of AD.

METHODS

The TPMC-NPs were prepared by ionic gelation method using sodium tripolyphosphate. The modification and functionalization were confirmed by FTIR and 1H-NMR spectroscopy. The physicochemical characterization was performed using DLS, FTIR,1H-NMR, CD spectroscopy, SEM, DSC, PXRD, HR-TEM, and hot-stage microscopy.

RESULTS

The size, PDI, percent entrapment efficiency, and percent drug loading of TPMC-NPs were found to be 287.4 ± 9.5, 0.273 ± 0.067, 81.15 ± 7.17%, 11.75%±8.21%, respectively. Electron microscope analysis revealed smooth and spherical morphology. The transferrin conjugation efficiency was found to be 46% by the BCA method. CD spectroscopy confirmed no significant loss of the secondary structure of transferrin after conjugation. PXRD data indicated the amorphous nature of the TPMC-NPs. Hot-stage microscopy and DSC confirmed the thermal stability of TPMC-NPs. The in-vitro drug release showed a sustained release at pH 7.4. The DPPH assay displayed 80% antioxidant activity of TPMC-NPs in comparison with metformin and blank NPs. The in-vitro cytotoxicity assay revealed 69.60% viable SH- SY5Y cells at 100 µg/mL of TPMC NPs. The ex-vivo nasal ciliotoxicity and mucoadhesion studies showed no significant toxicity, and 98.16% adhesion, respectively. The nasal permeability study showed the release of metformin within 30 min from TPMC-NPs.

CONCLUSION

The obtained results suggested the usefulness of TPMC-NPs in the treatment of AD via the intranasal route.

Quercetin and 5-Fu Loaded Chitosan Nanoparticles Trigger Cell-Cycle Arrest and Induce Apoptosis in HCT116 Cells via Modulation of the p53/p21 Axis

Nanoparticles (NPs) are encapsulating agents that exist in the nanometer range. They can be classified into different classes based on their properties, shapes, or sizes. Metal NPs, fullerenes, polymeric NPs, ceramic NPs, and luminescent nanoporous hybrid materials are only a few examples. This study explored the anticancer potential of quercetin and 5-fluorouracil-encapsulated chitosan nanoparticles (CS-5-FU-QCT NPs). The nanoparticles were prepared by ionic gelation, and their efficacy and mechanism of action were examined. CS-5-FU-QCT NPs were characterized using dynamic light scattering (DLS), atomic force microscopy (AFM), UV-visible spectroscopy, and Fourier transform infrared spectroscopy (FTIR); cytotoxicity was analyzed using an MTT assay. Cells were treated with CS-5-FU-QCT NPs and incubated for 12, 24, and 36 h, and apoptosis analysis (using Annexin V/FITC), cell-cycle analysis, Western blotting, and confocal microscopic analysis were performed. Biophysical analysis revealed that the CS-5-FU-QCT NPs fall in the range of 300-400 nm with a near-spherical shape. The in vitro drug release profile indicates sustained release of drugs over a period of about 36 h. The cytotoxicity of CS-5-FU-QCT NPs was more prominent in HCT116 cells than in other cancer cells. This particular nanoformulation caused G0/G1 phase cell-cycle arrest in HCT116 cells and induced intracellular ROS generation, thereby causing apoptosis. It also downregulated Bcl2, cyclin D1, and Cdk4 and upregulated BAX, p53, and p21, causing cell-cycle arrest and apoptosis. In summary, CS-5-FU-QCT NPs hindered proliferation of HCT116 cells via ROS generation and altered the expression of key proteins in the p53/p21 axis and apoptotic machinery in a time-dependent manner.

Multi-functional chitosan-based nanoparticles for drug delivery: Recent advanced insight into cancer therapy

Cancer therapy continues to be a major global concern, with conventional treatments suffering from low efficacy, untargeted drug delivery, and severe side effects. Recent research in nanomedicine suggests that nanoparticles' unique physicochemical properties can be leveraged to surmount the limitations of conventional cancer treatment. Chitosan-based nanoparticles have gained significant attention due to their high drug-carrying capacity, non-toxicity, biocompatibility, and long circulation time. Chitosan is utilized in cancer therapies as a carrier to accurately deliver active ingredients to tumor sites. This review focuses on clinical studies and current market offerings of anticancer drugs. The unique nature of tumor microenvironments presents new opportunities for the development of smart drug delivery systems, and this review explores the design and preparation of chitosan-based smart nanoparticles. Further, we discuss the therapeutic efficacies of these nanoparticles based on various in vitro and in vivo findings. Finally, we present a forward-looking perspective on the challenges and prospects of chitosan-based nanoparticles in cancer therapy, intending to provide fresh ideas for advancing cancer treatment strategies.

Preparation, characterization, and evaluation of antibacterial and cytotoxic activity of chitosan-polyethylene glycol nanoparticles loaded with amoxicillin as a novel drug delivery system

In this study, nanoparticles of amoxicillin (AMX) were prepared using chitosan (CHI) and polyethylene glycol (PEG). The physicochemical properties of the particles were investigated by FT-IR, DSC, SEM, and zeta potential analyses. The nanoparticles showed a spherical shape, and the average size of formulations was within the range of 696.20 ± 24.86 - 359.53 ± 7.41 nm. Zeta potential data demonstrated that the formulations had positive surface charges with a zeta potential range of 21.38 ± 2.28 - 7.73 ± 1.66 mV. FTIR analysis showed that the drug was successfully entrapped in the nanoparticles. DSC results suggested that the drug was present in amorphous form in the polymer matrix. In vitro release studies demonstrated that the release pattern consisted of two phases, with an initial burst release followed by a controlled and sustained release. The MTT assay results on mouse fibroblast cell line indicated that the prepared formulations did not affect the viability of the cells. In the in vitro antibacterial activity test, it was found that the drug-loaded nanoparticles have AMX-equivalent antibacterial activity against E. coli, and S. aureus. These findings revealed that the obtained nanoparticles might be a promising and safe nanocarrier system for efficient delivery of AMX.

Scavenging of copper(II) ions, phosphate(V) ions, and diuron from aqueous media by goethite modified with chitosan or poly(acrylic acid)

Goethite was modified by chitosan (CS) or poly(acrylic acid) (PAA) to improve its adsorptive abilities toward components of agrochemicals, i.e., copper ions (Cu), phosphate ions (P), and diuron. The pristine goethite effectively bound Cu (7.68 mg/g, 63.71%) and P (6.31 mg/g, 50.46%) only in their mixed systems. In the one adsorbate solutions, the adsorption levels accounted for 3.82 mg/g (30.57%) for Cu, 3.22 mg/g (25.74%) for P, and 0.15 mg/g (12.15%) for diuron. Goethite modification with CS or PAA did not yield spectacular results in adsorption. The maximum increase in adsorbed amount was noted for Cu ions (8.28%) after PAA modification as well as for P (6.02%) and diuron (24.04%) after CS modification. Both goethite modifications contributed to clear reduction in desorption of pollutants (even by 20.26% for Cu after PAA coating), which was mainly dictated by electrostatic attractive forces and hydrogen bonds formation occurring between macromolecules and impurities. The only exception in this phenomenon was Cu desorption from CS-modified solid-the polymer made it higher (to 95.00%). The Cu adsorption on PAA-modified goethite enhanced solid aggregation and thus facilitated metal cation separation from aqueous media. Consequently, the goethite modification with PAA was considered more promising for environmental remediation.

Amelioration of Cancer Employing Chitosan, Its Derivatives, and Chitosan-Based Nanoparticles: Recent Updates

The limitations associated with the conventional treatment of cancer have necessitated the design and development of novel drug delivery systems based mainly on nanotechnology. These novel drug delivery systems include various kinds of nanoparticles, such as polymeric nanoparticles, solid lipid nanoparticles, nanostructured lipid carriers, hydrogels, and polymeric micelles. Among the various kinds of novel drug delivery systems, chitosan-based nanoparticles have attracted the attention of researchers to treat cancer. Chitosan is a polycationic polymer generated from chitin with various characteristics such as biocompatibility, biodegradability, non-toxicity, and mucoadhesiveness, making it an ideal polymer to fabricate drug delivery systems. However, chitosan is poorly soluble in water and soluble in acidic aqueous solutions. Furthermore, owing to the presence of reactive amino groups, chitosan can be chemically modified to improve its physiochemical properties. Chitosan and its modified derivatives can be employed to fabricate nanoparticles, which are used most frequently in the pharmaceutical sector due to their possession of various characteristics such as nanosize, appropriate pharmacokinetic and pharmacodynamic properties, non-immunogenicity, improved stability, and improved drug loading capacity. Furthermore, it is capable of delivering nucleic acids, chemotherapeutic medicines, and bioactives using modified chitosan. Chitosan and its modified derivative-based nanoparticles can be targeted to specific cancer sites via active and passive mechanisms. Based on chitosan drug delivery systems, many anticancer drugs now have better effectiveness, potency, cytotoxicity, or biocompatibility. The characteristics of chitosan and its chemically tailored derivatives, as well as their use in cancer therapy, will be examined in this review.

Tumor tropic delivery of FU.FA@NSs using mesenchymal stem cells for synergistic chemo-photodynamic therapy of colorectal cancer

To overcome the limitations associated with the targeting abilities of nanotherapeutics and drug loading capacity of mesenchymal stem cells (MSCs), the present study relies on the combination of MSCs tumor tropism with the controlled release function of nano-based drug delivery platforms to achieve tumor-specific accumulation of chemotherapeutics with minimal off-target effects. 5-fluorouracil (5-FU)-containing ceria (CeNPs) coated calcium carbonate nanoparticles (CaNPs) were functionalized with folinic acid (FA) to develop drug-containing nanocomposites (Ca.FU.Ce.FA NCs). NCs were then conjugated with graphene oxide (GO) and decorated with silver nanoparticles (Ag°NPs) to form FU.FA@NS, a rationally designed drug delivery system with O₂ generation capacity that alleviates tumor hypoxia for improved photodynamic therapy. Engineering of MSCs with FU.FA@NSs provided successful loading and long-term retention of therapeutics on the surface membrane with minimal changes to the functional properties of MSCs. Co-culturing of FU.FA@NS.MSCs with CT26 cells upon UVA exposure revealed enhanced apoptosis in tumor cells through ROS-mediated mitochondrial pathway. FU.FA@NSs released from MSCs were effectively taken up by CT26 cells via a clathrin-mediated endocytosis pathway and distributed their drug depots in a pH, H₂O₂, and UVA-stimulated fashion. Therefore, the cell-based biomimetic drug delivery platform formulated in the current study could be considered a promising strategy for targeted chemo-photodynamic therapy of colorectal cancer.

Multilayer Methacrylate-Based Wound Dressing as a Therapeutic Tool for Targeted Pain Relief

This study presents an innovative wound dressing system that offers a highly effective therapeutic solution for treating painful wounds. By incorporating the widely used non-steroidal anti-inflammatory drug diclofenac, we have created an active wound dressing that can provide targeted pain relief with ease. The drug was embedded within a biocompatible matrix composed of polyhydroxyethyl methacrylate and polyhydroxypropyl methacrylate. The multilayer structure of the dressing, which allows for sustained drug release and an exact application, was achieved through the layer-by-layer coating technique and the inclusion of superparamagnetic iron platinum nanoparticles. The multilayered dressings' physicochemical, structural, and morphological properties were characterised using various methods. The synergistic effect of the incorporated drug molecules and superparamagnetic nanoparticles on the surface roughness and release kinetics resulted in controlled drug release. In addition, the proposed multilayer wound dressings were found to be biocompatible with human skin fibroblasts. Our findings suggest that the developed wound dressing system can contribute to tailored therapeutic strategies for local pain relief.

Biodegradable Biopolymeric Nanoparticles for Biomedical Applications-Challenges and Future Outlook

Biopolymers are polymers obtained from either renewable or non-renewable sources and are the most suitable candidate for tailor-made nanoparticles owing to their biocompatibility, biodegradability, low toxicity and immunogenicity. Biopolymeric nanoparticles (BPn) can be classified as natural (polysaccharide and protein based) and synthetic on the basis of their origin. They have been gaining wide interest in biomedical applications such as tissue engineering, drug delivery, imaging and cancer therapy. BPn can be synthesized by various fabrication strategies such as emulsification, ionic gelation, nanoprecipitation, electrospray drying and so on. The main aim of the review is to understand the use of nanoparticles obtained from biodegradable biopolymers for various biomedical applications. There are very few reviews highlighting biopolymeric nanoparticles employed for medical applications; this review is an attempt to explore the possibilities of using these materials for various biomedical applications. This review highlights protein based (albumin, gelatin, collagen, silk fibroin); polysaccharide based (chitosan, starch, alginate, dextran) and synthetic (Poly lactic acid, Poly vinyl alcohol, Poly caprolactone) BPn that has recently been used in many applications. The fabrication strategies of different BPn are also being highlighted. The future perspective and the challenges faced in employing biopolymeric nanoparticles are also reviewed.

In-house fabrication of macro-porous biopolymeric hydrogel and its deployment for adsorptive remediation of lead and cadmium from water matrices

A novel adsorbent was prepared by blending chitosan (CS) and acrylic acid (AA) while using formaldehyde as a cross linker in the form of hydrogel beads. The adsorption properties of these hydrogel beads for the removal of toxic metal ions (Pb²⁺ and Cd²⁺) from aqueous solutions were evaluated. The hydrogel beads have a 3D macro-porous structure whose -NH₂ groups were considered to be the dominant binding specie for Cd and Pb ions. The equilibrium adsorption capacity (q_e) of beads was significantly affected by the mass ratio of sorbent and sorbate. The percentage removal of Cd and Pb ions was observed to be enhanced with the increase in sorbate concentration. The hydrogel beads maintained good adsorption properties at adsorption-desorption equilibrium. The Langmuir and Freundlich models were used to elaborate the isotherms as well as isotherm constants. Adsorption isothermal data is well explained by the Freundlich model. The data of experimental kinetics is interrelated with the second-order kinetic model, which showed that the chemical sorption phenomenon is the rate limiting step. The results of intraparticle diffusion model described the adsorption process occurred on a porous substance that proved chitosan/Formaldehyde beads to be the favorable adsorbent.

Chitosan Nanoparticles Loaded Poloxamer 407 Gel for Transungual Delivery of Terbinafine HCl

The current study aimed to develop chitosan nanoparticles (CSNP) loaded poloxamer 407 (P407) gel formulation for transungual delivery of terbinafine HCl (TBN). TBN-CSNP were prepared by nanoprecipitation method and optimized by face-centered central composite design (FCCCD). Optimized TBN-CSNP formulation exhibited a spherical shape with hydrodynamic diameter; zeta potential and entrapment efficiency (EE) of 229 ± 5 nm; 37 ± 1.5 mV; and 75 ± 2% respectively. The solid state of TBN and its compatibility with formulation ingredients were confirmed through XRD and FTIR analysis respectively. TBN-CSNP loaded P407 gel exhibited pseudoplastic rheological behavior having a spreadability of 11 ± 2 g·cm/s. The washability study showed that 40 ± 2% of the gel was eroded after washing 12 times. Drug release from TBN-CSNP- and TBN-CSNP-loaded gel was 84 ± 5% and 57 ± 3%, respectively. The cumulative quantity of TBN permeated from TBN-CSNP-loaded P407 gel and TBN-loaded P407 gel was 25 ± 8 and 27 ± 4 µg/cm2, respectively. The nail uptake study showed that 3.6 ± 0.7 and 2.1 ± 0.3 µg of rhodamine was uptaken by the nail following 2 h topical application of TBN-CSNP loaded P407 gel and TBN loaded P407 gel, respectively. Hence, the developed CSNP-based P407 gel formulation can be a potential carrier for transungual delivery of TBN to topically treat onychomycosis.

Formation Optimization, Characterization and Antioxidant Activity of Auricularia auricula-judae Polysaccharide Nanoparticles Obtained via Antisolvent Precipitation

Auricularia auricula-judae polysaccharide (AAP)-based nanoparticles (NPs) prepared via an anti-solvent precipitation approach were studied. Response surface methodology (RSM) design was carried out on the basis of single factor experiments, using average size and polydispersity index (PDI) as indicators. The optimal preparation conditions were determined to include an AAP concentration of 1 mg/mL, a pH of 8, and an anti-solvent/solvent volume ratio of 6. The average particle sizes of the AAP-NPs, PDI and electrical characteristic (ζ-potential) were found to be 150.27 ± 3.21 nm, 0.135 ± 0.012 and -31.10 ± 0.52 mV, respectively. Furthermore, Fourier transform infrared spectroscopy (FTIR) was used to determine the chemical structure of the AAP-NPs. It was observed that the intensity of AAP-NPs in the wide spectral band of 3000-3750 cm^-1 was significantly stronger than that of the AAP, as was the characteristic peak of carboxyl anion, and the characteristic band moved to shorter wavelengths. Subsequent thermogravimetric analysis showed that the antisolvent precipitation method improved the thermal stability of the AAP, while scanning electron microscopy (SEM) and X-ray diffraction (XRD) showed that the morphology of AAP-NPs was uniform and well-distributed, and that their single crystal structures had remained unaffected during the process. Moreover, the DPPH and ABTS scavenging activities of AAP-NPs were increased, and the IC50 values were 0.544 ± 0.241 mg/mL and 0.755 ± 0.226 mg/mL, respectively.

Folate decorated lipid chitosan hybrid nanoparticles of 5-fluorouracil for enhanced anticancer efficacy against colon cancer

The study aimed to develop folate decorated lipid chitosan hybrid nanoparticles for targeted delivery of 5-fluorouracil in colon cancer by utilizing the overexpressed folate receptors on the surface of HT-29 and HCT 116 cancer cell lines. The developed formulations were prepared by the ionic gelation method with slight modifications. The developed formulations exhibited spherical morphology, smaller particle size (158 to 225 nm), zeta potential (32.24 to 35.95 mV), PDI (0.19 to 0.35), and high encapsulation efficiency (85.3 % to 94.2 %) with optimal physicochemical characteristics. The in vitro release showed a biphasic release pattern with an initial burst release followed by a sustained release for 48 h. Moreover, the in vitro cell line study revealed that FA-CLPN-2 exhibited an enhanced cellular uptake and greater cytotoxic effect in HT-29 and HCT 116 cell lines compared to non-targeted CLPN-2 and free drug solution due to the folate receptor facilitated endocytosis process. The in vivo toxicity study revealed the safety and biocompatibility of the developed formulations in biological systems. The stability study demonstrates the stability of the developed formulations. Overall, these results suggest that the folate decorated lipid chitosan hybrid nanoparticles could be used as a potential delivery system for tumor-targeted therapy with reduced side effects.

Chitosan/Gamma-Alumina/Fe3O4@5-FU Nanostructures as Promising Nanocarriers: Physiochemical Characterization and Toxicity Activity

Today, cancer treatment is an important issue in the medical world due to the challenges and side effects of ongoing treatment procedures. Current methods can be replaced with targeted nano-drug delivery systems to overcome such side effects. In the present work, an intelligent nano-system consisting of Chitosan (Ch)/Gamma alumina (γAl)/Fe3O4 and 5-Fluorouracil (5-FU) was synthesized and designed for the first time in order to influence the Michigan Cancer Foundation-7 (MCF-7) cell line in the treatment of breast cancer. Physico-chemical characterization of the nanocarriers was carried out using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), vibrating sample magnetometry (VSM), dynamic light scattering (DLS), and scanning electron microscopy (SEM). SEM analysis revealed smooth and homogeneous spherical nanoparticles. The high stability of the nanoparticles and their narrow size distribution was confirmed by DLS. The results of the loading study demonstrated that these nano-systems cause controlled, stable, and pH-sensitive release in cancerous environments with an inactive targeting mechanism. Finally, the results of MTT and flow cytometry tests indicated that this nano-system increased the rate of apoptosis induction on cancerous masses and could be an effective alternative to current treatments.

Synthesis of novel combinatorial drug delivery system (nCDDS) for co-delivery of 5-Fluorouracil and Leucovorin calcium for colon targeting and controlled drug release

Objective: Purpose of the current study was to improve the oral effectiveness of 5-Fluorouracil (5-FU) by developing novel controlled, combinatorial drug delivery system (nCDDS) for co-delivery of 5-FU and Leucovorin (LC) for colon targeting.Significance: on the basis of results obtained, novel controlled, combinatorial drug delivery system (nCDDS) could be an effective strategy for the colon targeting of 5-FU and LC.Methods: Free radical polymerization method was tuned and used to fabricate this nCDDS. The nCDDS is synthesized in two steps, firstly synthesis of 5-fluoruracil/leucovorin calcium loaded nanogels and secondly, pre-synthesized 5-FU & LC loaded nanogels were dispersed in pectin based polymerized matrix hard gel. The nanogels and nCDD gels were characterized for network structure, thermal stability and surface morphology. Swelling and in-vitro release studies were carried out at different pH 1.2 and 7.4 both for naive nanogels and combined matrix gels. In-vivo study of combinatorial gel was performed on rabbits by using HPLC method to estimate plasma drug concentration and pharmacokinetics parameters.Results: Structure and thermal analysis confirmed the formation of stable polymeric network. SEM of nanogels and combinatorial gels showed that the spongy and rough edges particles and uniformly distributed in the combinatorial gel. The prepared nCDDS showed excellent water loving capacity and pH responsiveness. Combinatorial gel showed excellent characteristic for colonic delivery of drugs, which were confirmed by various in-vitro and in-vivo characterization. Acute oral toxicity study of combinatorial gel confirmed the biocompatible and non-toxic characteristics of developed formulation.Conclusion: Conclusively it can be found that nCDDS showed excellent properties regarding drug targeting in a controllable manner as compared to naive PEGylated nanogels.

Significance of Polymers with “Allyl” Functionality in Biomedicine: An Emerging Class of Functional Polymers

In recent years, polymer-based advanced drug delivery and tissue engineering have grown and expanded steadily. At present, most of the polymeric research has focused on improving existing polymers or developing new biomaterials with tunable properties. Polymers with free functional groups offer the diverse characteristics needed for optimal tissue regeneration and controlled drug delivery. Allyl-terminated polymers, characterized by the presence of a double bond, are a unique class of polymers. These polymers allow the insertion of a broad diversity of architectures and functionalities via different chemical reactions. In this review article, we shed light on various synthesis methodologies utilized for generating allyl-terminated polymers, macromonomers, and polymer precursors, as well as their post-synthesis modifications. In addition, the biomedical applications of these polymers reported in the literature, such as targeted and controlled drug delivery, improvement i aqueous solubility and stability of drugs, tissue engineering, and antimicrobial coatings, are summarized.

Novel Methacrylate-Based Multilayer Nanofilms with Incorporated FePt-Based Nanoparticles and the Anticancer Drug 5-Fluorouracil for Skin Cancer Treatment

Despite medical advances, skin-associated disorders continue to pose a unique challenge to physicians worldwide. Skin cancer is one of the most common forms of cancer, with more than one million new cases reported each year. Currently, surgical excision is its primary treatment; however, this can be impractical or even contradictory in certain situations. An interesting potential alternative could lie in topical treatment solutions. The goal of our study was to develop novel multilayer nanofilms consisting of a combination of polyhydroxyethyl methacrylate (PHEMA), polyhydroxypropyl methacrylate (PHPMA), sodium deoxycholate (NaDOC) with incorporated superparamagnetic iron–platinum nanoparticles (FePt NPs), and the potent anticancer drug (5-fluorouracil), for theranostic skin cancer treatment. All multilayer systems were prepared by spin-coating and characterised by atomic force microscopy, infrared spectroscopy, and contact angle measurement. The magnetic properties of the incorporated FePt NPs were evaluated using magnetisation measurement, while their size was determined using transmission electron microscopy (TEM). Drug release performance was tested in vitro, and formulation safety was evaluated on human-skin-derived fibroblasts. Finally, the efficacy for skin cancer treatment was tested on our own basal-cell carcinoma cell line.

pH-Sensitive nanoparticles containing 5-fluorouracil and leucovorin as an improved anti-cancer option for colon cancer

Background: Parenteral administration of chemotherapeutic drugs, 5-fluorouracil (5-FU) and leucovorin (LV), is commonly used to treat large bowel carcinomas such as colon cancer (CC) and colorectal carcinoma (CRC). Aim: Our study aims to design a novel nanoparticulate drug-delivery vehicle for oral use capable of colon-specific release. Methods: A modified double-emulsion solvent evaporation method was used in the preparation of pH-responsive Eudargit^® S100 polymeric nanoparticles, loaded with 5-FU/LV combination (5-FU/LV-loaded Eudargit S100 NPs). Results: Our optimized drug-loaded NP showed a pH-responsive drug release and exhibited significantly more cytotoxic actions in cancer-cell lines than free drugs. Conclusion: These findings open the way for conducting clinical trials for colon malignancies treated with nanoparticles.

Synthesis of highly fluorescent, amine-functionalized carbon dots from biotin-modified chitosan and silk-fibroin blend for target-specific delivery of antitumor agents

Carbon dots (CDs) have been a promising theranostic tool with high biocompatibility and a tailorable fluorescence profile. Herein, we report the synthesis of highly fluorescent amine-functionalized CDs from low molecular weight chitosan (LMWC) and silk-fibroin (SF) blends. The synthesized CDs were quasi-spherical in shape with a size of 3 ± 1.5 nm. A significant increase in fluorescent intensity and quantum yield was achieved upon increasing the SF content due to nitrogen doping. For inducing target specificity to cancer cells, biotin was covalently conjugated to the CDs, and the conjugation was determined by FTIR spectroscopy. The conjugate was further loaded with 5-fluorouracil (5-FU) as a model anti-cancer drug. The MTT assay showed increased cytotoxicity of the conjugated CDs in cancer cells compared to normal cells. The live-cell imaging in MCF-7 cell lines showed bright blue-colored fluorescence and increased internalization of the conjugated CDs than the non-conjugate ones due to receptor-mediated endocytosis.

A novel modified chitosan/collagen coated-gold nanoparticles for 5-fluorouracil delivery: Synthesis, characterization, in vitro drug release studies, anti-inflammatory activity and in vitro cytotoxicity assay

We report herein the development of the novel nanohybrids of gold nanoparticles reduced/stabilized/coated with collagen (AuNPs@collagen) in the first layer and subsequently modified with biotin-quat188-chitosan (Bi-QCS) in the outer layer for 5-fluorouracil (5-FU) delivery to improve cellular uptake and promote specific cell targeting of the nanocarrier. The fabrication of the layer-by-layer technique on the surface of gold nanoparticles (AuNPs) can overcome the limitation of poor drug loading capacity of the classic AuNPs from 64.67% to 87.46%. The AuNPs@collagen coated by the Bi-QCS exhibits strong electrostatic interactions between drug anion (5-FU) and amine groups of the modified chitosan as well as hydrogen bonding. Furthermore, the Bi-QCS-AuNPs@collagen demonstrated a significantly higher anti-inflammatory activity in RAW264.7 macrophage cell line. The Bi-QCS-AuNPs@collagen enhanced the activity of 5-FU approximately 3.3-fold (HeLa) and 6.2-fold (A549), compared to the free 5-Fluorouracil. According to these results, it is very promising that Bi-QCS-AuNPs@collagen can be used as an effective drug delivery carrier in the future.

Chitosan-based nanoparticles for controlled release of hydrophobic and hydrophilic drugs

Nanoparticles encapsulating different kinds of therapeutic drugs are promising drug delivery systems for controlling release and targeting tumor cells. Chitosan nanoparticles made by polyelectrolyte complexation were designed as drug carriers using doxorubicin (DOX)/5-fluorouracil (5-FU) as hydrophobic/hydrophilic model drugs. The sizes of nanoparticles were 235 ± 13 and 177 ± 7 nm with narrow distributions. The effects of the initial drug amount and pH of the medium on drug-controlled release properties were evaluated, the model-fitting results and release mechanisms were analyzed as well. For 5-FU-loaded chitosan nanoparticles, the controlled-release effect was superior to that of DOX, indicating that the polyelectrolyte complex nanoparticles were more suitable for hydrophilic drugs, particularly for negatively charged or electrically neutral drugs. Moreover, the release behaviors conformed with the first-order kinetic model, indicating that the nanoparticles were mainly released by diffusion during the drug release process; the system could also be fitted using the Higuchi model, showing that the entire drug release process was dominated by diffusion and supplemented by gradual dissolution. In all, the results suggested that chitosan nanoparticles made by polyelectrolyte complexation can be launched as a smart drug delivery system for cancer treatments.

Reviewing Chitin/Chitosan Nanofibers and Associated Nanocomposites and Their Attained Medical Milestones

Chitin/chitosan research is an expanding field with wide scope within polymer research. This topic is highly inviting as chitin/chitosan's are natural biopolymers that can be recovered from food waste and hold high potentials for medical applications. This review gives a brief overview of the chitin/chitosan based nanomaterials, their preparation methods and their biomedical applications. Chitin nanofibers and Chitosan nanofibers have been reviewed, their fabrication methods presented and their biomedical applications summarized. The chitin/chitosan based nanocomposites have also been discussed. Chitin and chitosan nanofibers and their binary and ternary composites are represented by scattered superficial reports. Delving deep into synergistic approaches, bringing up novel chitin/chitosan nanocomposites, could help diligently deliver medical expectations. This review highlights such lacunae and further lapses in chitin related inputs towards medical applications. The grey areas and future outlook for aligning chitin/chitosan nanofiber research are outlined as research directions for the future.

Curcumin-laden dual-targeting fucoidan/chitosan nanocarriers for inhibiting brain inflammation via intranasal delivery

Curcumin can reduce the production of brain inflammatory mediators and symptoms of brain diseases. However, a large amount of free curcumin needs to be administered to achieve an effective level in the brain because of its poor water-solubility. Fucoidan and chitosan were reported to respectively target P-selectin and acidic microenvironment expressed by pathologically inflammatory cells/tissues. Herein, the self-assembly of chitosan and fucoidan which could encapsulate curcumin was developed to form the multi-stimuli-responsive nanocarriers, and their pathological pH- and P-selectin-responsive aspects were characterized. Through intranasal delivery to the brain, these curcumin-containing chitosan/fucoidan nanocarriers with dual pH-/P-selectin-targeting properties to the brain lesions improved drug delivery, distribution, and accumulation in the inflammatory brain lesions as evidenced by an augmented inhibitory effect against brain inflammation. This promising multifunctional nanocarrier with a novel drug-delivery route should allow potential clinical biomedical uses by neurosurgeon in the future.

Targeted Nanoparticles for Co-delivery of 5-FU and Nitroxoline, a Cathepsin B Inhibitor, in HepG2 Cells of Hepatocellular Carcinoma

BACKGROUND

The first choice of treatment in Hepatocellular Carcinoma (HCC) is 5-fluorouracil (5-FU). Nitroxoline (NIT), a potent inhibitor of Cathepsin B, impairs tumor progression by decreased extracellular matrix degradation. The objective of the current project was designed to target nanoparticles for co-delivery of 5-FU and NIT in order to enhance the 5-FU cytotoxic effects and reduce the metastatic properties of HepG2 cells.

METHODS

5-FU and NIT were loaded in chitosan-chondroitin nanoparticles. To target the CD44 receptors of HepG2 cells, Hyaluronic Acid (HA) was conjugated to the chondroitin by adipic acid dihydrazide and the conjugation was confirmed by FTIR and 1HNMR. After physicochemical characterization and optimization of the processing variables, MTT assay was done on HepG2 and NIH3T3 cell lines to determine the cytotoxic properties of HA targeted nanoparticles. Migration of the cells was studied to compare the co-delivery of the drugs with each drug alone.

RESULTS

The optimized nanoparticles showed the particle size of 244.7±16.3nm, PDI of 0.30±0.03, drug entrapment efficiency of 46.3±5.0% for 5-FU and 75.1±0.9% for NIT. The drug release efficiency up to 8 hours was about 37.6±0.9% for 5-FU and 62.9±0.7% for NIT. The co-delivery of 5-FU and NIT in targeted nanoparticles showed significantly more cytotoxicity than the mixture of the two free drugs, non-targeted nanoparticles or each drug alone and reduced the IC50 value of 5-FU from 3.31±0.65μg/ml to 0.17±0.03μg/ml and the migration of HepG2 cells was also reduced to five-fold.

CONCLUSION

Co-delivery of 5-FU and NIT by HA targeted chitosan-chondroitin nanoparticles may be promising in HCC.

The Design of Anionic Surfactant-Based Amino-Functionalized Mesoporous Silica Nanoparticles and their Application in Transdermal Drug Delivery

Melanoma remains the most lethal form of skin cancer and most challenging to treat despite advances in the oncology field. Our work describes the utilization of nanotechnology to target melanoma locally in an attempt to provide an advanced and efficient quality of therapy. Amino-functionalized mesoporous silica nanoparticles (MSN-NH₂) were developed in situ through the utilization of anionic surfactant and different volumes of 3-aminopropyltriethoxysilane (APTES) as a co-structure directing agent (CSDA). Prepared particles were characterized for their morphology, particles size, 5-flurouracol (5-FU) and dexamethasone (DEX) loading capacity and release, skin penetration, and cytotoxicity in vitro in HT-144 melanoma cells. Results of transmission electron microscopy (TEM) and nitrogen adsorption-desorption isotherm showed that using different volumes of APTES during the functionalization process had an impact on the internal and external morphology of the particles, as well as particle size. However, changing the volume of APTES did not affect the diameter of formed mesochannels, which was about 4 nm. MSN-NH₂ showed a relatively high loading capacity of 5-FU (12.6 ± 5.5) and DEX (44.72 ± 4.21) when using drug: MSN-NH₂ ratios of 5:1 for both drugs. The release profile showed that around 83% of 5-FU and 21% of DEX were released over 48 h in pH 7.4. The skin permeability study revealed that enhancement ratio of 5-Fu and DEX using MSN-NH₂ were 4.67 and 5.68, respectively, relative to their free drugs counterparts. In addition, the accumulation of drugs in skin layers where melanoma cells usually reside were enhanced approximately 10 times with 5-FU and 5 times with DEX when delivering drugs using MSN-NH₂ compared to control. MSN-NH₂ alone was nontoxic to melanoma cells when incubated for 48 h in the range of 0 to 468 µg/mL. The combination of 5-FU MSN-NH₂ and DEX MSN-NH₂ showed significant increase in toxicity compared to their free dug counterparts and exhibited a synergetic effect as well as the ability to circumvent DEX induced 5-FU resistance in melanoma cells.

Chitosan/carbon quantum dot/aptamer complex as a potential anticancer drug delivery system towards the release of 5-fluorouracil

Nowadays, nanotechnology contributes diminishing side effects rather than traditional therapeutic methods like chemotherapy. Thus, designing a biocompatible specific targeted nanocarrier with prolonged half-life and enhanced bio-availability using simultaneous cell imaging seems urgent. To meet this demand, 5-fluorouracil-chitosan‑carbon quantum dot-aptamer (5-FU-CS-CQD-Apt) nanoparticle was successfully synthesized for specific targeted delivery of 5-FU anti-cancer drug used in breast cancer treatment and this was done by following facile water-in-oil (W/O) emulsification method. Physicochemical properties were characterized and high drug loading and entrapment efficiency were achieved. The average size and zeta potential of the nanoparticle were 122.7 nm and + 31.2 mV, respectively. According to the in-vitro drug release profile, 5-FU-CS-CQD-Apt released the drug in a controlled manner. MTT assay, flow cytometry, fluorescence microscopy, and gene expression results demonstrated that the blank nanoparticle was biocompatible, and 5-FU-CS-CQD-Apt could kill tumor cells efficiently. Bcl-2/Bax ratio was decreased after 5-FU-CS-CQD-Apt treatment in MCF-7 cells. It was concluded that 5-FU-CS-CQD-Apt could be used as a potential nanocarrier in breast cancer treatment.

Optimization to development of chitosan decorated polycaprolactone nanoparticles for improved ocular delivery of dorzolamide: In vitro, ex vivo and toxicity assessments

The present research work was designed to develop dorzolamide-loaded chitosan-coated polycaprolactone nanoparticles (DRZ-CS-PCL-NPs) for improved ocular delivery. The nanoparticles were prepared by single-step emulsification technique and optimized using the three-factor three-level Box-Behnken design. The optimized DRZ-CS-PCL-NPs prepared with the composition of polycaprolactone (60 mg), chitosan (0.6%) and polyvinyl alcohol (1.5%). The particle size, polydispersity index, zeta potential and encapsulation efficiency of optimized DRZ-CS-PCL-NPs were found to be 192.38 ± 6.42 nm, 0.18 ± 0.04, +5.21 ± 1.24 mV, and 72.48 ± 5.62%, respectively. The dependent and independent response variables showed excellent correlation and signifying the rationality of the optimized DRZ-CS-PCL-NPs. The DRZ release from CS-PCL-NPs showed biphasic behaviour with initial burst release for 2 h after that sustained-release up to 12 h of study. The corneal flux experiment showed many fold enhancement in permeation across goat cornea. DRZ-CS-PCL-NPs exhibited 3.7 fold higher mucoadhesive strength compared to the control. Furthermore, the histopathological assessment and HET-CAM study revealed that the DRZ-CS-PCL-NPs were non-irritant and safe for ocular administration. Therefore, from the present study, it can be concluded that the optimized DRZ-CS-PCL-NPs are safe and have the potential for successful ocular delivery and improved therapeutic efficacy.

Development of polymeric nanoparticle gel prepared with the combination of ionic pre-gelation and polyelectrolyte complexation as a novel drug delivery of timolol maleate

OBJECTIVE

The purpose of this study was to overcome the undesired systemic absorption of skin topical administration of timolol maleate (TM) by developing the TM nanoparticle gel.

METHODS

TM-loaded nanoparticle (TMNP) was prepared by ionic pre-gelation of pectin (PCN) and calcium ions (CI) followed with polyelectrolyte complex using chitosan (CHI). TMNP was characterized by measuring the particle size, polydispersity index, zeta potential, encapsulation efficiency (EE), and the interaction between formula constituents. TM-loaded nanoparticle gel (TMNG) was prepared by using hydroxypropyl methylcellulose (HPMC) and was characterized by measuring the spreadability, pH, viscosity, and drug content. The drug release kinetics were analyzed using DDSolver add-in program.

RESULTS

TMNP possessed particle size of 175.2 ± 19.7 nm, polydispersity index of 0.528 ± 0.113, zeta potential of -10.86 ± 0.87 mV, and EE of 27.45 ± 2.34%. The electrostatic interactions between PCN, CI, and CHI that formed the nanoparticles were confirmed by the result of vibrational spectroscopy analysis. TMNG possessed spreadability of 60.80 ± 1.38 cm², pH of 5.154 ± 0.004, viscosity of 269.07 ± 5.83 cP, and drug content of 107.38 ± 1.77%. TM showed a sustained release manner within 24 h by following Korsmeyer-Peppas kinetical model with non-Fickian release mechanism.

CONCLUSION

The prepared nanoparticle gel can be an effective controlled release system of TM that administered topically on the skin surface.

ROS-Responsive Chitosan Coated Magnetic Iron Oxide Nanoparticles as Potential Vehicles for Targeted Drug Delivery in Cancer Therapy

Background and Objective

Cancer cells accumulate high concentrations of reactive oxygen species as a result of their faster and uninhibited metabolic activity. Cancer chemotherapeutic agents release an excess of severe adverse reactions as a result of targeting normal cells. This demands an improvement in targeted drug-delivery systems to selectively discharge anticancer drugs in the vicinity of such highly metabolically and mitotically active cells.

Materials and Methods

Here, magnetic nanoparticles were synthesized by a traditional co-precipitation technique. Fe₃O₄@OA-CS-5-FLU-NPs were synthesized by an easy and rapid in situ loading method. The proposed Fe₃O₄@OA-CS-5-FLU-NPs were productively prepared as well as characterized by various spectroscopic and microscopic studies.

Results

The targeted drug release profile of the Fe₃O₄@OA-CS-5-FLU-NPs was studied in the presence of ROS including H₂O₂ and pH induction. The released product, Fe₃O₄@OA-CS-5-FLU-NP, exhibited desirable levels of cytotoxicity and demonstrated morphological changes and inhibition of colony formation for A549 and HeLa S3 cancer cells. The IC50 values at 24 hours were 12.9 and 23 μg/mL, respectively.

Conclusion

In summary, results from the MTT assay, fluorescence staining as well as colony formation assays, revealed that the Fe₃O₄@OA-CS-5-FLU-NPs were active and safe for anticancer biomedical applications. In summary, the present investigation provides a powerful nanostructured based system for improved cancer theranostics that should be further studied.

In vivo approach of simply constructed pyrazinamide conjugated chitosan-g-polycaprolactone micelles for methicillin resistance Staphylococcus aureus

Methicillin-resistant Staphylococcus aureus (MRSA) is an extensive origin of nosocomial infections that are very much challenging as well as complicated to eradicate mostly due to their strong resistance against all existing antibiotic therapies. Here the chitosan-grafted-polycaprolactone/maleic anhydride-pyrazinamide (CS-g-PCL/MA-PZA) polymeric drug carrier constructed via dialysis for anti-MRSA drugs like rifampicin (RF) and pyrazinamide (PZA) delivery. Nearly 200 nm size of the spherical particle with -20.04 mV of zeta potential observed. The cumulative PZA and RF releases from the carrier were observed 83.25% and 76.54% respectively in pH 5.5, and the in vitro drug release profile demonstrates that the fabricated micelle was pH-responsive. For the intestinal colonization, an in vivo assay performed using C. elegans, and the CS-g-PCL/MA-PZA/RF micelles treated worms generally belong to the weakly colonized category. Therefore, the study revealed that CS-g-PCL/MA-PZA/RF micelle could be a promising approach for therapeutic applications to achieve efficient anti-MRSA drug delivery.

Formulation, characterization and in vitro release study of 5-fluorouracil loaded chitosan nanoparticles

The main objective of this study was to evaluate the most suitable conditions to prepare 5-fluorouracil (5-FU) loaded chitosan nanoparticles (CSNPs). 5-FU loaded CSNPs were prepared employing the ionic gelation technique using three different molecular weights of CS with the polyanion sodium tripolyphosphate (STPP) as cross-linking agent. The preparation was based on the ionic interaction of positively charged CS and negatively charged STPP. The entrapment efficiency (EE%) of CSNPs was in the range of 3.86-21.82% EE% exhibited a clear increase with increasing CS concentration. The averge particles size was in the nanosize range and monodisperse in nature whereas transmission electron microscope micrographs showed that the prepared nanoparticles have a spherical shape. Fourier transform infrared (FTIR), X- ray differaction (XRD) and differential scanning calorimetry (DSC) confirmed successful incorporation of 5-FU in prepared CSNPs. In vitro release of 5-FU from selected formulations exhibited sustained release from the nanoparticles where slower release was observed when higher molecular weight CS was used. The study of drug release kinetics revealed that the release of 5-FU from CSNPs followed a diffusion controlled pattern.

5-Fluorouracil monodispersed chitosan microspheres: Microfluidic chip fabrication with crosslinking, characterization, drug release and anticancer activity

Different size and morphology monodispersed chitosan (CS) microspheres loaded with the anticancer drug of 5-fluorouracil (5-Fu) were prepared by the microfluidic method assisted by a crosslinking unit with crosslinkers of tripolyphosphate (TPP) and glutaraldehyde (GTA). The sizes, morphologies, drug loading, encapsulation efficiency, drug release and cytotoxicity of 5-Fu loaded CS microspheres were characterized and determined. Results indicated that the CS microspheres were uniform in size distributions. They possessed excellent encapsulation efficiency and drug loading. The TPP-crosslinked CS microspheres had rough surfaces and exhibited faster drug release, whereas the CS microspheres crosslinked with GTA had smooth surfaces and showed slower drug release. Furthermore, 5-Fu-loaded CS microspheres exhibited sustained drug release which well fitted the first-order kinetics model and were pH-responsive in that the drug cumulative release was greater at acidic environments than at neutral conditions. Finally, 5-Fu loaded CS microspheres provided sufficient cytotoxicity and were satisfactory in the cancer cell inhibition.