Enhancement of neural cell lines proliferation using nano-structured chitosan/poly(vinyl alcohol) scaffolds conjugated with nerve growth factor

Preparation and application of chitosan-based medical electrospun nanofibers

Chitosan is a kind of polysaccharide cationic polymer, which has excellent biocompatibility, biodegradability and biological activity. In recent years, chitosan has been widely used as medical materials because of its non-toxicity, non-immunogenicity and rich sources. This paper reviews chitosan chemistry, the basic principles and influence of electrospinning technology, the blending of chitosan with polyethylene oxide, polyvinyl alcohol, polycaprolactone, polylactic acid, protein, polysaccharide and other polymer materials, the blending of chitosan with oxides, metals, carbon-based and other inorganic substances for electrospinning, the application of chitosan electrospinning nanofibers in medical field and its mechanism in clinical application. In order to provide reference for the in-depth study of electrospinning technology in the field of medical and health.

Lytic Bacteriophage as a Biomaterial to Prevent Biofilm Formation and Promote Neural Growth

BACKGROUND

Although non-lytic filamentous bacteriophages have been made into biomaterial to guide tissue growth, they had limited ability to prevent bacterial infection. In this work a lytic bacteriophage was used to make an antibacterial biomaterial for neural tissue repair.

METHODS

Lytic phages were chemically bound to the surface of a chitosan film through glutaraldehyde crosslinking. After the chemical reaction, the contact angle of the sample surface and the remaining lytic potential of the phages were measured. The numbers of bacteria on the samples were measured and examined under scanning electron microscopy. Transmission electron microscopy (TEM) was used to observe the phages and phage-infected bacteria. A neuroblast cell line was cultured on the samples to evaluate the sample's biocompatibility.

RESULTS

The phages conjugated to the chitosan film preserved their lytic potential and reduced 68% of bacterial growth on the sample surface at 120 min (p < 0.001). The phage-linked surface had a significantly higher contact angle than that of the control chitosan (p < 0.05). After 120 min a bacterial biofilm appeared on the control chitosan, while the phage-linked sample effectively prevented biofilm formation. The TEM images demonstrated that the phage attached and lysed the bacteria on the phage-linked sample at 120 min. The phage-linked sample significantly promoted the neuroblast cell attachment (p < 0.05) and proliferation (p < 0.01). The neuroblast on the phage-linked sample demonstrated more cell extensions after day 1.

CONCLUSION

The purified lytic phages were proven to be a highly bioactive nanomaterial. The phage-chitosan composite material not only promoted neural cell proliferation but also effectively prevent bacterial growth, a major cause of implant failure and removal.

Enhanced mesenchymal stem cells growth on antibacterial microgrooved electrospun zinc chloride/polycaprolactone conduits for peripheral nerve regeneration

In this study, we have investigated the effect of adding zinc chloride (ZnCl2) on polycaprolactone (PCL) before and after electrospinning. The rheological properties and conductivity of ZnCl2/PCL solutions were measured prior to the electrospinning process. The resultant electrospun mats were characterized by SEM, contact angle, FTIR, XRD, mechanical properties, as well as its antibacterial and stem cell proliferation assessment were tested. It was found that the fibers became finer by increasing the zinc salt content. Moreover, stability increased slightly up to 5% Zn-PCL and also the hydrophilicity has been enhanced by 52%. By adding ZnCl2, the degradation rate and mechanical properties were significantly increased. Also, the resultant mats have shown antibacterial properties against S. aureus than E. coli. From the stem cells proliferation study, it can be observed that by increasing ZnCl2, the stem cells proliferation was significantly increased. Grooved multichannel nerve conduits were successfully fabricated by rolling the electrospun mats produced on corn husks which has shown better cell alignment and attachment. Hence, adding zinc chloride is a facile biocompatible enhancement to polycaprolactone nanofibers to be used in nerve regeneration.

Electrospun Nanofibers for Cancer Therapy

Lately, a remarkable progress has been recorded in the field of electrospinning for the preparation of numerous types of nanofiber scaffolds. These scaffolds present some remarkable features including high loading capacity and encapsulation efficiency, superficial area and porosity, potential for modification, structure for the co-delivery of various therapies, and cost-effectiveness. Their present and future applications for cancer diagnosis and treatment are promising and pioneering. In this chapter we provide a comprehensive overview of electrospun nanofibers (ESNFs) applications in cancer diagnosis and treatment, covering diverse types of drug-loaded electrospun nanofibers.

Regeneration of the peripheral nerve via multifunctional electrospun scaffolds

Over the last two decades, electrospun scaffolds have proved to be advantageous in the field of nerve tissue regeneration by connecting the cavity among the proximal and distal nerve stumps growth cones and leading to functional recovery after injury. Multifunctional nanofibrous structure of these scaffolds provides enormous potential by combining the advantages of nano-scale topography, and biological science. In these structures, selecting the appropriate materials, designing an optimized structure, modifying the surface to enhance biological functions and neurotrophic factors loading, and native cell-like stem cells should be considered as the essential factors. In this systematic review paper, the fabrication methods for the preparation of aligned nanofibrous scaffolds in yarn or conduit architecture are reviewed. Subsequently, the utilized polymeric materials, including natural, synthetic and blend are presented. Finally, their surface modification techniques, as well as, the recent advances and outcomes of the scaffolds, both in vitro and in vivo, are reviewed and discussed.

Poly(Vinyl Alcohol)-Based Nanofibrous Electrospun Scaffolds for Tissue Engineering Applications

Tissue engineering (TE) holds an enormous potential to develop functional scaffolds resembling the structural organization of native tissues, to improve or replace biological functions and prevent organ transplantation. Amongst the many scaffolding techniques, electrospinning has gained widespread interest because of its outstanding features that enable the production of non-woven fibrous structures with a dimensional organization similar to the extracellular matrix. Various polymers can be electrospun in the form of three-dimensional scaffolds. However, very few are successfully processed using environmentally friendly solvents; poly(vinyl alcohol) (PVA) is one of those. PVA has been investigated for TE scaffolding production due to its excellent biocompatibility, biodegradability, chemo-thermal stability, mechanical performance and, most importantly, because of its ability to be dissolved in aqueous solutions. Here, a complete overview of the applications and recent advances in PVA-based electrospun nanofibrous scaffolds fabrication is provided. The most important achievements in bone, cartilage, skin, vascular, neural and corneal biomedicine, using PVA as a base substrate, are highlighted. Additionally, general concepts concerning the electrospinning technique, the stability of PVA when processed, and crosslinking alternatives to glutaraldehyde are as well reviewed.

Chitosan/polyvinyl alcohol nanofibrous membranes: towards green super-adsorbents for toxic gases

Removal of hazardous gases from the atmosphere has become a big challenge for scientists and engineers alike. Eco-friendly nature of biopolymers has given a new dimension to the debate within the environmental science area but attempts mainly failed to cleanse the air stream of toxic gases as a consequence of design imperfections. In this work, green electrospun nanofibrous membranes based on chitosan (Cs)/polyvinyl alcohol (PVA) composite with a very high carbon monoxide adsorption capacity (much higher than the values one may expect from activated carbon and zeolite adsorbents, and also higher than that of the metal-organic framework) are developed. 2^k−1 factorial design, response surface and desirability function analyses are merged to optimize the electrospinning parameters for functional-based carbon monoxide elimination. The best Cs/PVA adsorbent obtained through multi-objective optimization has a very high desirability value level of 0.953. Optimized electrospinning parameters are: Voltage = 17 kV, spinning distance = 13 cm, flow rate = 0.2 mL/h, and PVA concentration = 6 wt.%; and optimized properties are: maximum thermal stability = 329 °C, minimum fiber diameter = 9.8 nm, and maximum surface area = 2204 m²/g. This work opens a new era for taking the next steps towards the design and optimization of green super-adsorbents for gaseous contaminations.

Gold nanorods reinforced silk fibroin nanocomposite for peripheral nerve tissue engineering applications

Nowadays, regenerating peripheral nerves injuries (PNIs) remain a major clinical challenge, which has gained a great attention between scientists. Here, we represent a nanocomposite based on silk fibroin reinforced gold nanorods (SF/GNRs) to evaluate the proliferation and attachment of PC12 cells. The morphological characterization of nanocomposites with transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) showed that the fabricated scaffolds have porous structure with interconnected pores that is suitable for cell adhesion and growth. GNRs significantly improved the poor electrical conductivity of bulk silk fibroin scaffold. Evaluating the morphology of PC12 cells on the scaffold also confirmed the normal morphology of cells with good rate of adhesion. SF/GNRs nanocomposites showed better cellular attachment, growth and proliferation without any toxicity compared with bulk SF scaffold. Moreover, immunostaining studies represented the overexpression of neural specific proteins like nestin and neuron specific enolase (NSE) in the cells cultured on SF/GNRs nanocomposites in comparison to neat SF scaffolds.

Biomedical Applications of Electrospun Nanofibers: Drug and Nanoparticle Delivery

The electrospinning process has gained popularity due to its ease of use, simplicity and diverse applications. The properties of electrospun fibers can be controlled by modifying either process variables (e.g., applied voltage, solution flow rate, and distance between charged capillary and collector) or polymeric solution properties (e.g., concentration, molecular weight, viscosity, surface tension, solvent volatility, conductivity, and surface charge density). However, many variables affecting electrospinning are interdependent. An optimized electrospinning process is one in which these parameters remain constant and continuously produce nanofibers consistent in physicochemical properties. In addition, nozzle configurations, such as single nozzle, coaxial, multi-jet electrospinning, have an impact on the fiber characteristics. The polymeric solution could be aqueous, a polymeric melt or an emulsion, which in turn leads to different types of nanofiber formation. Nanofiber properties can also be modified by polarity inversion and by varying the collector design. The active moiety is incorporated into polymeric fibers by blending, surface modification or emulsion formation. The nanofibers can be further modified to deliver multiple drugs, and multilayer polymer coating allows sustained release of the incorporated active moiety. Electrospun nanofibers prepared from polymers are used to deliver antibiotic and anticancer agents, DNA, RNA, proteins and growth factors. This review provides a compilation of studies involving the use of electrospun fibers in biomedical applications with emphasis on nanoparticle-impregnated nanofibers.

Chitosan-Intercalated Montmorillonite/Poly(vinyl alcohol) Nanofibers as a Platform to Guide Neuronlike Differentiation of Human Dental Pulp Stem Cells

In this study, we present a novel chitosan-intercalated montmorillonite/poly(vinyl alcohol) (OMMT/PVA) nanofibrous mesh as a microenvironment for guiding differentiation of human dental pulp stem cells (hDPSCs) toward neuronlike cells. The OMMT was prepared through ion exchange reaction between the montmorillonite (MMT) and chitosan. The PVA solutions containing various concentrations of OMMT were electrospun to form 3D OMMT-PVA nanofibrous meshes. The biomechanical and biological characteristics of the nanofibrous meshes were evaluated by ATR-FTIR, XRD, SEM, MTT, and LDH specific activity, contact angle, and DAPI staining. They were carried out for mechanical properties, overall viability, and toxicity of the cells. The hDPSCs were seeded on the prepared scaffolds and induced with neuronal specific differentiation media at two differentiation stages (2 days at preinduction stage and 6 days at induction stage). The neural differentiation of the cells cultured on the meshes was evaluated by determining the expression of Oct-4, Nestin, NF-M, NF-H, MAP2, and βIII-tubulin in the cells after preinduction, at induction stages by real-time PCR (RT-PCR) and immunostaining. All the synthesized nanofibers exhibited a homogeneous morphology with a favorable mechanical behavior. The population of the cells differentiated into neuronlike cells in all the experimental groups was significantly higher than that in control group. The expression level of the neuronal specific markers in the cells cultured on 5% OMMT/PVA meshes was significantly higher than the other groups. This study demonstrates the feasibility of the OMMT/PVA artificial nerve graft cultured with hDPSCs for regeneration of damaged neural tissues. These fabricated matrices may have a potential in neural tissue engineering applications.

Prospects of siRNA applications in regenerative medicine

Small interfering RNA (siRNA) has established its reputation in the field of tissue engineering owing to its ability to silence the proteins that inhibit tissue regeneration. siRNA is capable of regulating cellular behavior during tissue regeneration processes. The concept of using siRNA technology in regenerative medicine derived from its ability to inhibit the expression of target genes involved in defective tissues and the possibility to induce the expression of tissue-inductive factors that improve the tissue regeneration process. To date, siRNA has been used as a suppressive biomolecule in different tissues, such as nervous tissue, bone, cartilage, heart, kidney, and liver. Moreover, various delivery systems have been applied in order to deliver siRNA to the target tissues. This review will provide an in-depth discussion on the development of siRNA and their delivery systems and mechanisms of action in different tissues.

Heparin/collagen encapsulating nerve growth factor multilayers coated aligned PLLA nanofibrous scaffolds for nerve tissue engineering

Biomimicing topological structure of natural nerve tissue to direct axon growth and controlling sustained release of moderate neurotrophic factors are extremely propitious to the functional recovery of damaged nervous systems. In this study, the heparin/collagen encapsulating nerve growth factor (NGF) multilayers were coated onto the aligned poly-L-lactide (PLLA) nanofibrous scaffolds via a layer-by-layer (LbL) self-assembly technique to combine biomolecular signals, and physical guidance cues for peripheral nerve regeneration. Scanning electronic microscopy (SEM) revealed that the surface of aligned PLLA nanofibrous scaffolds coated with heparin/collagen multilayers became rougher and appeared some net-like filaments and protuberances in comparison with PLLA nanofibrous scaffolds. The heparin/collagen multilayers did not destroy the alignment of nanofibers. X-ray photoelectron spectroscopy and water contact angles displayed that heparin and collagen were successfully coated onto the aligned PLLA nanofibrous scaffolds and improved its hydrophilicity. Three-dimensional (3 D) confocal microscopy images further demonstrated that collagen, heparin, and NGF were not only coated onto the surface of aligned PLLA nanofibrous scaffolds but also permeated into the inner of scaffolds. Moreover, NGF presented a sustained release for 2 weeks from aligned nanofibrous scaffolds coated with 5.5 bilayers or above and remained good bioactivity. The heparin/collagen encapsulating NGF multilayers coated aligned nanofibrous scaffolds, in particular 5.5 bilayers or above, was more beneficial to Schwann cells (SCs) proliferation and PC12 cells differentiation as well as the SC cytoskeleton and neurite growth along the direction of nanofibrous alignment compared to the aligned PLLA nanofibrous scaffolds. This novel scaffolds combining sustained release of bioactive NGF and aligned nanofibrous topography presented an excellent potential in peripheral nerve regeneration. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1900-1910, 2017.

* Hierarchically Structured Electrospun Scaffolds with Chemically Conjugated Growth Factor for Ligament Tissue Engineering

The anterior cruciate ligament (ACL) of the knee is vital for proper joint function and is commonly ruptured during sports injuries or car accidents. Due to a lack of intrinsic healing capacity and drawbacks with allografts and autografts, there is a need for a tissue-engineered ACL replacement. Our group has previously used aligned sheets of electrospun polycaprolactone nanofibers to develop solid cylindrical bundles of longitudinally aligned nanofibers. We have shown that these nanofiber bundles support cell proliferation and elongation and the hierarchical structure and material properties are similar to the native human ACL. It is possible to combine multiple nanofiber bundles to create a scaffold that attempts to mimic the macroscale structure of the ACL. The goal of this work was to develop a hierarchical bioactive scaffold for ligament tissue engineering using connective tissue growth factor (CTGF)-conjugated nanofiber bundles and evaluate the behavior of mesenchymal stem cells (MSCs) on these scaffolds in vitro and in vivo. CTGF was immobilized onto the surface of individual nanofiber bundles or scaffolds consisting of multiple nanofiber bundles. The conjugation efficiency and the release of conjugated CTGF were assessed using X-ray photoelectron spectroscopy, assays, and immunofluorescence staining. Scaffolds were seeded with MSCs and maintained in vitro for 7 days (individual nanofiber bundles), in vitro for 21 days (scaled-up scaffolds of 20 nanofiber bundles), or in vivo for 6 weeks (small scaffolds of 4 nanofiber bundles), and ligament-specific tissue formation was assessed in comparison to non-CTGF-conjugated control scaffolds. Results showed that CTGF conjugation encouraged cell proliferation and ligament-specific tissue formation in vitro and in vivo. The results suggest that hierarchical electrospun nanofiber bundles conjugated with CTGF are a scalable and bioactive scaffold for ACL tissue engineering.

Zero valent zinc nanoparticles promote neuroglial cell proliferation: A biodegradable and conductive filler candidate for nerve regeneration

Regeneration of nerve, which has limited ability to undergo self-healing, is one of the most challenging areas in the field of tissue engineering. Regarding materials used in neuroregeneration, there is a recent trend toward electrically conductive materials. It has been emphasized that the capacity of conductive materials to regenerate such tissue having limited self-healing ability improves their clinical utility. However, there have been concerns about the safety of materials or fillers used for conductance due to their lack of degradability. Here, we attempt to use poly(Ɛ-caprolactone) (PCL) matrix consisting of varying proportions of zero valent zinc nanoparticles (Zn NPs) via electrospinning. These conductive, biodegradable, and bioactive materials efficiently promoted neuroglial cell proliferation depending on the amount of Zn NPs present in the PCL matrix. Chemical characterizations indicated that the incorporated Zn NPs do not interact with the PCL matrix chemically and that the Zn NPs improved the tensile properties of the PCL matrix. All composites exhibited linear conductivity under in vitro conditions. In vitro cell culture studies were performed to determine the cytotoxicity and proliferative efficiency of materials containing different proportions of Zn NPs. The results were obtained to explore new conductive fillers that can promote tissue regeneration.

Drug loading and delivery using nanofibers scaffolds

In recent times, notable advancement has been made in the field of electrospinning for the fabrication of numerous types of nanofiber scaffolds. Due to the ultrathin fiber diameter, electrospun nanofiber scaffolds are considered to be an operational delivery system for biomolecules, genes, as well as drugs due to the high specific surface area and stereological porous structure. Here, we introduce some of methods for the integration of drugs and biomolecules within electrospun nanofiber scaffolds, such as blending, surface modification, coaxial process, and emulsion methods. Then, we describe some important biomedical applications of nanofibers in drug delivery systems along with their suitable examples in transdermal systems and wound dressings, cancer therapy, growth factor delivery, nucleic acid delivery, and stem cell delivery.

Prospects of chitosan-based scaffolds for growth factor release in tissue engineering

Tissue engineering is concerned about the rejuvenation and restoration of diseased and damages tissues/organs using man-made scaffolds that mimic the native environment of the cells. In recent years, a variety of biocompatible and biodegradable natural materials is employed for the fabrication of such scaffolds. Of these natural materials, chitosan is the most preferred one as it imitates the extracellular matrix (ECM) of the cells. Moreover, chitosan-based materials are pro-angiogenic and have antibacterial activity. These materials can be easily fabricated into the desired shape of the scaffolds that are suitable for tissue support and regeneration. Growth factors are small proteins/peptides that support and enhance the growth and differentiation of cells into a specific lineage. It has been observed that scaffolds capable of delivering growth factor promote tissue repair and regeneration at a faster rate when compared to scaffolds without growth factor. The present review focuses on the recent developments on chitosan-based scaffolds for the delivery of growth factors thereby improving and enhancing tissue regeneration.

Micro-structured, spontaneously eroding hydrogels accelerate endothelialization through presentation of conjugated growth factors

Growth factors represent highly potent and highly efficacious means of communication to cells. At the same time, these proteins are fragile and relatively small sized--rendering their immobilization and controlled release from biomaterials challenging. In this work, we establish a method to incorporate growth factors into the physical hydrogels based on poly(vinyl alcohol), PVA. The latter have a long and successful history of biomedical applications and approval for diverse use in human patients, but are also characterized with scant opportunities for bioconjugation and functionalization. Herein, we develop the conjugation of growth factors to the micro-structured, spontaneously eroding physical hydrogels based on PVA. Protein conjugation was elaborated using model substrates, albumin and lysozyme, which aided to reveal specificity of chemical reactions and benign, non-harmful nature of the established protocols. Surface-adhered format of hydrogel analyses allowed to quantify bioconjugation reactions and enzymatic activity of the immobilized proteins and to visualize the hydrogels with immobilized cargo. In cell culture, immobilized growth factors were effective in communicating to adhering cells and specifically enhanced proliferation rates of the cells containing the corresponding receptors. At the same time, proliferation of the cells devoid of these receptors was un-altered.

Strategies for regeneration of components of nervous system: scaffolds, cells and biomolecules

Nerve diseases including acute injury such as peripheral nerve injury (PNI), spinal cord injury (SCI) and traumatic brain injury (TBI), and chronic disease like neurodegeneration disease can cause various function disorders of nervous system, such as those relating to memory and voluntary movement. These nerve diseases produce great burden for individual families and the society, for which a lot of efforts have been made. Axonal pathways represent a unidirectional and aligned architecture allowing systematic axonal development within the tissue. Following a traumatic injury, the intricate architecture suffers disruption leading to inhibition of growth and loss of guidance. Due to limited capacity of the body to regenerate axonal pathways, it is desirable to have biomimetic approach that has the capacity to graft a bridge across the lesion while providing optimal mechanical and biochemical cues for tissue regeneration. And for central nervous system injury, one more extra precondition is compulsory: creating a less inhibitory surrounding for axonal growth. Electrospinning is a cost-effective and straightforward technique to fabricate extracellular matrix (ECM)-like nanofibrous structures, with various fibrous forms such as random fibers, aligned fibers, 3D fibrous scaffold and core-shell fibers from a variety of polymers. The diversity and versatility of electrospinning technique, together with functionalizing cues such as neurotrophins, ECM-based proteins and conductive polymers, have gained considerable success for the nerve tissue applications. We are convinced that in the future the stem cell therapy with the support of functionalized electrospun nerve scaffolds could be a promising therapy to cure nerve diseases.

Nanoclay-reinforced electrospun chitosan/PVA nanocomposite nanofibers for biomedical applications

Chitosan/PVA/nanoclay nanocomposite nanofibers have been prepared successfully by electrospinning. Bead-free morphology was achieved for the nanofibrous mats and the nanoclays were incorporated and distributed uniformly inside the nanofibers.

Nanofibrous chitosan-polyethylene oxide engineered scaffolds: a comparative study between simulated structural characteristics and cells viability

3D nanofibrous chitosan-polyethylene oxide (PEO) scaffolds were fabricated by electrospinning at different processing parameters. The structural characteristics, such as pore size, overall porosity, pore interconnectivity, and scaffold percolative efficiency (SPE), were simulated by a robust image analysis. Mouse fibroblast cells (L929) were cultured in RPMI for 2 days in the presence of various samples of nanofibrous chitosan/PEO scaffolds. Cell attachments and corresponding mean viability were enhanced from 50% to 110% compared to that belonging to a control even at packed morphologies of scaffolds constituted from pores with nanoscale diameter. To elucidate the correlation between structural characteristics within the depth of the scaffolds' profile and cell viability, a comparative analysis was proposed. This analysis revealed that larger fiber diameters and pore sizes can enhance cell viability. On the contrary, increasing the other structural elements such as overall porosity and interconnectivity due to a simultaneous reduction in fiber diameter and pore size through the electrospinning process can reduce the viability of cells. In addition, it was found that manipulation of the processing parameters in electrospinning can compensate for the effects of packed morphologies of nanofibrous scaffolds and can thus potentially improve the infiltration and viability of cells.

Bio-hybrid silk fibroin/calcium phosphate/PLGA nanocomposite scaffold to control the delivery of vascular endothelial growth factor

This study investigated the efficacy of bio-hybrid silk fibroin/Calcium phosphate/PLGA nanocomposite scaffold as vascular endothelial growth factor (VEGF) delivery system. The scaffold was fabricated using freeze-drying and electrospinning. Here, we highlight the structural changes of the scaffold using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and differential scanning calorimetry (DSC). The uniform dispersion of calcium phosohate (CaP) powder within silk fibroin (SF) solution was also confirmed using Zeta potential analysis. Moreover, good biocompatibility of osteoblast cells next to the scaffold was approved by cell adhesion, proliferation and alkaline phosphatase production. The release profile of VEGF during 28 days has established the efficacy of the scaffold as a sustained delivery system. The bioactivity of the released VEGF was maintained about 83%. The histology analysis has shown that the new bone tissue formation happened in the defected site after 10 weeks of implantation. Generally, our data showed that the fabricated scaffold could be considered as an effective scaffold for bone tissue engineering applications.

A biosynthetic nerve guide conduit based on silk/SWNT/fibronectin nanocomposite for peripheral nerve regeneration

As a contribution to the functionality of nerve guide conduits (NGCs) in nerve tissue engineering, here we report a conduit processing technique through introduction and evaluation of topographical, physical and chemical cues. Porous structure of NGCs based on freeze-dried silk/single walled carbon nanotubes (SF/SWNTs) has shown a uniform chemical and physical structure with suitable electrical conductivity. Moreover, fibronectin (FN) containing nanofibers within the structure of SF/SWNT conduits produced through electrospinning process have shown aligned fashion with appropriate porosity and diameter. Moreover, fibronectin remained its bioactivity and influenced the adhesion and growth of U373 cell lines. The conduits were then implanted to 10 mm left sciatic nerve defects in rats. The histological assessment has shown that nerve regeneration has taken places in proximal region of implanted nerve after 5 weeks following surgery. Furthermore, nerve conduction velocities (NCV) and more myelinated axons were observed in SF/SWNT and SF/SWNT/FN groups after 5 weeks post implantation, indicating a functional recovery for the injured nerves. With immunohistochemistry, the higher S-100 expression of Schwann cells in SF/SWNT/FN conduits in comparison to other groups was confirmed. In conclusion, an oriented conduit of biocompatible SF/SWNT/FN has been fabricated with acceptable structure that is particularly applicable in nerve grafts.

Advances in growth factor delivery for therapeutic angiogenesis

Therapeutic angiogenesis is a new revascularization strategy involving the administration of growth factors to induce new vessel formation. The biology and delivery of angiogenic growth factors involved in vessel formation have been extensively studied but success in translating the angiogenic capacity of growth factors into benefits for vascular disease patients is still limited. This could be attributed to issues related to patient selection, growth factor delivery methods or lack of vessel maturation. Comprehensive understanding of the cellular and molecular cross-talk during the different stages of vascular development is needed for the design of efficient therapeutic strategies. The presentation of angiogenic factors either in series or in parallel using a strategy that mimics physiological events, such as concentration and spatio-temporal profiles, is an immediate requirement for functional blood vessel formation. This review provides an overview of the recent delivery strategies of angiogenic factors and discusses targeting neovascular maturation as a promising approach to induce stable and functional vessels for therapeutic angiogenesis.