In situ forming spruce xylan-based hydrogel for cell immobilization

Renewable hemicellulose-based materials for value-added applications

The importance of renewable resources and environmentally friendly materials has grown globally in recent time. Hemicellulose is renewable lignocellulosic materials that have been the subject of substantial valorisation research. Due to its distinctive benefits, including its wide availability, low cost, renewability, biodegradability, simplicity of chemical modification, etc., it has attracted increasing interest in a number of value-added fields. In this review, a systematic summarizes of the structure, extraction method, and characterization technique for hemicellulose-based materials was carried out. Also, their most current developments in a variety of value-added adsorbents, biomedical, energy-related, 3D-printed materials, sensors, food packaging applications were discussed. Additionally, the most recent challenges and prospects of hemicellulose-based materials are emphasized and examined in-depth. It is anticipated that in the near future, persistent scientific efforts will enable the renewable hemicellulose-based products to achieve practical applications.

Amidation of arabinoglucuronoxylans to modulate their flow behavior

Arabinoglucuronoxylans obtained from the exudate of Cercidium praecox (Brea gum) were subjected to an amidation reaction to modulate their flow behavior to obtain a product with similar behavior to gum Arabic. The amidation reaction of the uronic acids present in this exudate was studied using the 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS) system with the aim of maximizing product yield and minimizing by-product. An analysis of the significant factors involved in the reaction was carried out and a response surface methodology was conducted to optimize the stoichiometry of the reagents used. It was possible to obtain models for predicting the degree of amidation (DA) of arabinoglucuronoxylans and the formation of by-products. The formation of a secondary product derived from the amino acid β-alanine which has not been reported previously in the reaction with polysaccharides, was described. The flow behavior of an amidated product (DA = 52 %) was determined, showing a pseudoplastic behavior and a decreased Newtonian viscosity (η0 = 36.2 Pa s) at the lowest shear rate range with respect to native product solution (η0 = 115 Pa s). Amidated arabinoglucuronoxylans had a flow behavior more similar to that of gum Arabic.

Photocross-Linkable and Shape-Memory Biomaterial Hydrogel Based on Methacrylated Cellulose Nanofibres

In the context of three-dimensional (3D) cell culture and tissue engineering, 3D printing is a powerful tool for customizing in vitro 3D cell culture models that are critical for understanding the cell-matrix and cell-cell interactions. Cellulose nanofibril (CNF) hydrogels are emerging in constructing scaffolds able to imitate tissue in a microenvironment. A direct modification of the methacryloyl (MA) group onto CNF is an appealing approach to synthesize photocross-linkable building blocks in formulating CNF-based bioinks for light-assisted 3D printing; however, it faces the challenge of the low efficiency of heterogenous surface modification. Here, a multistep approach yields CNF methacrylate (CNF-MA) with a decent degree of substitution while maintaining a highly dispersible CNF hydrogel, and CNF-MA is further formulated and copolymerized with monomeric acrylamide (AA) to form a super transparent hydrogel with tuneable mechanical strength (compression modulus, approximately 5-15 kPa). The resulting photocurable hydrogel shows good printability in direct ink writing and good cytocompatibility with HeLa and human dermal fibroblast cell lines. Moreover, the hydrogel reswells in water and expands to all directions to restore its original dimension after being air-dried, with further enhanced mechanical properties, for example, Young's modulus of a 1.1% CNF-MA/1% PAA hydrogel after reswelling in water increases to 10.3 kPa from 5.5 kPa.

Hemicellulose-based hydrogels for advanced applications

Hemicellulose-based hydrogels are three-dimensional networked hydrophilic polymer with high water retention, good biocompatibility, and mechanical properties, which have attracted much attention in the field of soft materials. Herein, recent advances and developments in hemicellulose-based hydrogels were reviewed. The preparation method, formation mechanism and properties of hemicellulose-based hydrogels were introduced from the aspects of chemical cross-linking and physical cross-linking. The differences of different initiation systems such as light, enzymes, microwave radiation, and glow discharge electrolytic plasma were summarized. The advanced applications and developments of hemicellulose-based hydrogels in the fields of controlled drug release, wound dressings, high-efficiency adsorption, and sensors were summarized. Finally, the challenges faced in the field of hemicellulose-based hydrogels were summarized and prospected.

Review of Bioprinting in Regenerative Medicine: Naturally Derived Bioinks and Stem Cells

Regenerative medicine offers the potential to repair or substitute defective tissues by constructing active tissues to address the scarcity and demands for transplantation. The method of forming 3D constructs made up of biomaterials, cells, and biomolecules is called bioprinting. Bioprinting of stem cells provides the ability to reliably recreate tissues, organs, and microenvironments to be used in regenerative medicine. 3D bioprinting is a technique that uses several biomaterials and cells to tailor a structure with clinically relevant geometries and sizes. This technique's promise is demonstrated by 3D bioprinted tissues, including skin, bone, cartilage, and cardiovascular, corneal, hepatic, and adipose tissues. Several bioprinting methods have been combined with stem cells to effectively produce tissue models, including adult stem cells, embryonic stem cells (ESCs), induced pluripotent stem cells (iPSCs), and differentiation techniques. In this review, technological challenges of printed stem cells using prevalent naturally derived bioinks (e.g., carbohydrate polymers and protein-based polymers, peptides, and decellularized extracellular matrix), recent advancements, leading companies, and clinical trials in the field of 3D bioprinting are delineated.

Structural characterization of the family GH115 α-glucuronidase from Amphibacillus xylanus yields insight into its coordinated action with α-arabinofuranosidases

The coordinated action of carbohydrate-active enzymes has mainly been evaluated for the purpose of complete saccharification of plant biomass (lignocellulose) to sugars. By contrast, the coordinated action of accessory hemicellulases on xylan debranching and recovery is less well characterized. Here, the activity of two family GH115 α-glucuronidases (SdeAgu115A from Saccharophagus degradans, and AxyAgu115A from Amphibacillus xylanus) on spruce arabinoglucuronoxylan (AGX) was evaluated in combination with an α-arabinofuranosidase from families GH51 (AniAbf51A, aka E-AFASE from Aspergillus niger) and GH62 (SthAbf62A from Streptomyces thermoviolaceus). The α-arabinofuranosidases boosted (methyl)-glucuronic acid release by SdeAgu115A by approximately 50 % and 30 %, respectively. The impact of the α-arabinofuranosidases on AxyAgu115A activity was comparatively low, motivating its structural characterization. The crystal structure of AxyAgu115A revealed increased length and flexibility of the active site loop compared to SdeAgu115A. This structural difference could explain the ability of AxyAgu115A to accommodate more highly substituted arabinoglucuronoxylan, and inform enzyme selections for improved AGX recovery and use.

Surface-Modified Nanocellulose for Application in Biomedical Engineering and Nanomedicine: A Review

Presently, a plenty of concerns related to the environment are due to the overuse of petroleum-based chemicals and products; the synthesis of functional materials, starting from the natural sources, is the current trend in research. The interest for nanocellulose has recently increased in a huge range of fields, from the material science to the biomedical engineering. Nanocellulose gained this leading role because of several reasons: its natural abundance on this planet, the excellent mechanical and optical features, the good biocompatibility and the attractive capability of undergoing surface chemical modifications. Nanocellulose surface tuning techniques are adopted by the high reactivity of the hydroxyl groups available; the chemical modifications are mainly performed to introduce either charged or hydrophobic moieties that include amination, esterification, oxidation, silylation, carboxymethylation, epoxidation, sulfonation, thiol- and azido-functional capability. Despite the several already published papers regarding nanocellulose, the aim of this review involves discussing the surface chemical functional capability of nanocellulose and the subsequent applications in the main areas of nanocellulose research, such as drug delivery, biosensing/bioimaging, tissue regeneration and bioprinting, according to these modifications. The final goal of this review is to provide a novel and unusual overview on this topic that is continuously under expansion for its intrinsic sophisticated properties.

Biomedical Applications of Hemicellulose-Based Hydrogels

Background:

Hydrogel has a three-dimensional network structure that is able to absorb a large amount of water/liquid and maintain its original structure. Hemicellulose (HC) is the second most abundant polysaccharide after cellulose in plants and a heterogeneous polysaccharide consisting of various saccharide units. The unique physical and chemical properties of hemicellulose make it a promising material for hydrogels.

Methods:

This review first summarizes the three research hotspots on the hemicellulose-based hydrogels: intelligence, biodegradability and biocompatibility. It also overviews the progress in the fabrication and applications of hemicellulose hydrogels in the drug delivery system and tissue engineering (articular cartilage, cell immobilization, and wound dressing).

Results:

Hemicellulose-based hydrogels have many unique properties, such as stimuliresponsibility, biodegradability and biocompatibility. Interpenetrating networking can endow appropriate mechanical properties to hydrogels. These properties make the hemicellulose-based hydrogels promising materials in biomedical applications such as drug delivery systems and tissue engineering (articular cartilage, cell immobilization, and wound dressing).

Conclusion:

Hydrogels have been widely used in biomedicine and tissue engineering areas, such as tissue fillers, drug release agents, enzyme encapsulation, protein electrophoresis, contact lenses, artificial plasma, artificial skin, and tissue engineering scaffold materials. This article reviews the recent progress in the fabrication and applications of hemicellulose-based hydrogels in the biomedical field.

Synthesis and characterization of temperature/pH dual sensitive hemicellulose-based hydrogels from eucalyptus APMP waste liquor

In this investigation, a variety of innovative temperature/pH-sensitive hydrogels consisting of hemicellulose (extracted from APMP waste liquor) and acrylic acid/acrylamide monomers were synthesized via free radical polymerization for water retention agents and controlled release. The results showed that the hydrogel polymer was chemically cross-linked and entangled to form a three-dimensional network structure, and the monomer successfully grafted on the hemicellulose chain. The content of crosslinkers and monomers had obvious effects on the swelling ratio of hydrogel. The sensitivity of the hydrogel was determined according to the change of the swelling ratio of the hydrogel under different temperature and pH conditions, combined with the chemical structure analysis of the hydrogel, and explain its sensitivity mechanism. Finally, after 6 days at 25 °C and pH 6, the swelled hydrogel still retained 79.46 % of the moisture, which proved that it has high water retention ability.

Chemically crosslinked xylan-β-Cyclodextrin hydrogel for the in vitro delivery of curcumin and 5-Fluorouracil

Novel hydrogels were synthesized from xylan and β-Cyclodextrin using Ethylene Glycol Diglycidyl Ether as a crosslinker in alkaline medium at different molar ratio. The physical characterization of hydrogels was carried out by the swelling study whereas the chemical characterization was performed in Fourier Transform Infrared Spectroscopy. The morphological analysis revealed the porous structure of hydrogel and the rheological study summarised the flow behavior and gelation characteristics of the hydrogels. Curcumin and 5-Fluorouracil (5-FU) were used as the model drugs to be loaded in hydrogel and subsequent studies involving the in vitro release in phosphate buffer saline (PBS, pH = 7.4). The hydrogels showed drug loading of 98% of 5-FU and 26% of curcumin. Furthermore, the gels showed the highest cumulative release of 56% 5-FU and 37% curcumin after 24 h. The kinetics of drug release was then analyzed by various kinetic models.

Cellulose Nanofibers and Other Biopolymers for Biomedical Applications. A Review

Biopolymers are materials synthesised or derived from natural sources, such as plants, animals, microorganisms or any other living organism. The use of these polymers has grown significantly in recent years as industry shifts away from unsustainable fossil fuel resources and looks towards a softer and more sustainable environmental approach. This review article covers the main classes of biopolymers: Polysaccharides, proteins, microbial-derived and lignin. In addition, an overview of the leading biomedical applications of biopolymers is also provided, which includes tissue engineering, medical implants, wound dressings, and the delivery of bioactive molecules. The future clinical applications of biopolymers are vast, due to their inherent biocompatibility, biodegradability and low immunogenicity. All properties which their synthetic counterparts do not share.

Hemicellulose from Plant Biomass in Medical and Pharmaceutical Application: A Critical Review

BACKGROUND

Due to the non-toxicity, abundance and biodegradability, recently more and more attention has been focused on the exploration of hemicellulose as the potential substrate for the production of liquid fuels and other value-added chemicals and materials in different fields. This review aims to summarize the current knowledge on the promising application of nature hemicellulose and its derivative products including its degradation products, its new derivatives and hemicellulosebased medical biodegradable materials in the medical and pharmaceutical field, especially for inmmune regulation, bacteria inhibition, drug release, anti-caries, scaffold materials and anti-tumor.

METHODS

We searched the related papers about the medical and pharmaceutical application of hemicellulose and its derivative products, and summarized their preparation methods, properties and use effects.

RESULTS

Two hundred and twenty-seven papers were included in this review. Forty-seven papers introduced the extraction and application in immune regulation of nature hemicellulose, such as xylan, mannan, xyloglucan (XG) and β-glucan. Seventy-seven papers mentioned the preparation and application of degradation products of hemicellulose for adjusting intestinal function, maintaining blood glucose levels, enhancing the immunity and alleviating human fatigue fields such as xylooligosaccharides, xylitol, xylose, arabinose, etc. The preparation of hemicellulose derivatives were described in thirty-two papers such as hemicellulose esters, hemicellulose ethers and their effects on anticoagulants, adsorption of creatinine, the addition of immune cells and the inhibition of harmful bacteria. Finally, the preparations of hemicellulose-based materials such as hydrogels and membrane for the field of drug release, cell immobilization, cancer therapy and wound dressings were presented using fifty-five papers.

CONCLUSION

The structure of hemicellulose-based products has the significant impact on properties and the use effect for the immunity, and treating various diseases of human. However, some efforts should be made to explore and improve the properties of hemicellulose-based products and design the new materials to broaden hemicellulose applications.

Surface Engineered Biomimetic Inks Based on UV Cross-Linkable Wood Biopolymers for 3D Printing

Owing to their superior mechanical strength and structure similarity to the extracellular matrix, nanocelluloses as a class of emerging biomaterials have attracted great attention in three-dimensional (3D) bioprinting to fabricate various tissue mimics. Yet, when printing complex geometries, the desired ink performance in terms of shape fidelity and object resolution demands a wide catalogue of tunability on the material property. This paper describes surface engineered biomimetic inks based on cellulose nanofibrils (CNFs) and cross-linkable hemicellulose derivatives for UV-aided extrusion printing, being inspired by the biomimetic aspect of intrinsic affinity of heteropolysaccharides to cellulose in providing the ultrastrong but flexible plant cell wall structure. A facile aqueous-based approach was established for the synthesis of a series of UV cross-linkable galactoglucomannan methacrylates (GGMMAs) with tunable substitution degrees. The rapid gelation window of the formulated inks facilitates the utilization of these wood-based biopolymers as the feeding ink for extrusion-based 3D printing. Most importantly, a wide and tunable spectrum ranging from 2.5 to 22.5 kPa of different hydrogels with different mechanical properties could be achieved by varying the substitution degree in GGMMA and the compositional ratio between GGMMA and CNFs. Used as the seeding matrices in the cultures of human dermal fibroblasts and pancreatic tumor cells, the scaffolds printed with the CNF/GGMMA inks showed great cytocompatibility as well as supported the matrix adhesion and proliferative behaviors of the studied cell lines. As a new family of 3D printing feedstock materials, the CNF/GGMMA ink will broaden the map of bioinks, which potentially meets the requirements for a variety of in vitro cell-matrix and cell-cell interaction studies in the context of tissue engineering, cancer cell research, and high-throughput drug screening.

Synthesis and characterization of biofunctional quaternized xylan-Fe2O3 core/shell nanocomposites and modification with polylysine and folic acid

The aims of this study are to prepare quaternized xylan-Fe₂O₃ (QX-Fe₂O₃) core/shell nanocomposites and explore their potential application in the biomedical fields. γ-Fe₂O₃ nanoparticles synthesized by a facile solvothermal process are coated with QX via reverse microemulsion method and further modified by polylysine (PLL) and folic acid (FA) to prepare PLL-QX-Fe₂O₃ and FA-QX-Fe₂O₃ nanoparticles. An obvious strong absorption of γ-Fe₂O₃ at 580 cm^-1 in the spectra of QX-Fe₂O₃ is observed, the Fe element content of QX-Fe₂O₃ is 30-75 μg/mL and the saturation magnetization of QX-Fe₂O₃ nanoparticles is 1.49 emu/g. The γ-Fe₂O₃ and QX-Fe₂O₃ nanoparticles are of regular sphericity with diameter of 50-100 nm and 60-150 nm, respectively. The highest zeta potential of QX-Fe₂O₃ nanoparticles is -41 mV, and the PLL-QX-Fe₂O₃ nanoparticles have a positive potential with a maximum value of 45.2 mV. In addition, FA-QX-Fe₂O₃ showed excellent performance in T₂-weighted Magnetic Resonance (MR) imaging with an r₂ value of 190 mM^-1S^-1. Each nanocomposite has its own inherent properties, which contributes to its versatile utilization and application potential.

Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications

Wood-derived biopolymers have attracted great attention over the past few decades due to their abundant and versatile properties. The well-separated three main components, i.e., cellulose, hemicelluloses, and lignin, are considered significant candidates for replacing and improving on oil-based chemicals and materials. The production of nanocellulose from wood pulp opens an opportunity for novel material development and applications in nanotechnology. Currently, increased research efforts are focused on developing 3D printing techniques for wood-derived biopolymers for use in emerging application areas, including as biomaterials for various biomedical applications and as novel composite materials for electronics and energy devices. This Review highlights recent work on emerging applications of wood-derived biopolymers and their advanced composites with a specific focus on customized pharmaceutical products and advanced functional biomedical devices prepared via three-dimensional printing. Specifically, various biofabrication strategies in which woody biopolymers are used to fabricate customized drug delivery devices, cartilage implants, tissue engineering scaffolds and items for other biomedical applications are discussed.

Horseradish peroxidase-catalyzed hydrogelation for biomedical applications

Hydrogels catalyzed by horseradish peroxidase (HRP) serve as an efficient and effective platform for biomedical applications due to their mild reaction conditions for cells, fast and adjustable gelation rate in physiological conditions, and an abundance of substrates as water-soluble biocompatible polymers.

Biomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing

This paper presents a sustainable all-wood-based ink which can be used for 3D printing of constructs for a large variety of applications such as clothes, furniture, electronics, and health care products with a customized design and versatile gel properties. The 3D printing technologies where the material is dispensed in the form of liquids, so called inks, have proven suitable for 3D printing dispersions of cellulose nanofibrils (CNFs) because of their unique shear thinning properties. In this study, novel inks were developed with a biomimetic approach where the structural properties of cellulose and the cross-linking function of hemicelluloses that are found in the plant cell wall were utilized. The CNF was mixed with xylan, a hemicellulose extracted from spruce, to introduce cross-linking properties which are essential for the final stability of the printed ink. For xylan to be cross-linkable, it was functionalized with tyramine at different degrees. Evaluation of different ink compositions by rheology measurements and 3D printing tests showed that the degree of tyramine substitution and the ratio of CNFs to xylan-tyramine in the prepared inks influenced the printability and cross-linking density. Both two-layered gridded structures and more complex 3D constructs were printed. Similarly to conventional composites, the interactions between the components and their miscibility are important for the stability of the printed and cross-linked ink. Thus, the influence of tyramine on the adsorption of xylan to cellulose was studied with a quartz crystal microbalance to verify that the functionalization had little influence on xylan's adsorption to cellulose. Utilizing xylan-tyramine in the CNF dispersions resulted in all-wood-based inks which after 3D printing can be cross-linked to form freestanding gels while at the same time, the excellent printing properties of CNFs remain intact.

Bioactives from fruit processing wastes: Green approaches to valuable chemicals

Fruit processing industries contribute more than 0.5billion tonnes of waste worldwide. The global availability of this feedstock and its untapped potential has encouraged researchers to perform detailed studies on value-addition potential of fruit processing waste (FPW). Compared to general food or other biomass derived waste, FPW are found to be selective and concentrated in nature. The peels, pomace and seed fractions of FPW could potentially be a good feedstock for recovery of bioactive compounds such as pectin, lipids, flavonoids, dietary fibres etc. A novel bio-refinery approach would aim to produce a wider range of valuable chemicals from FPW. The wastes from majority of the extraction processes may further be used as renewable sources for production of biofuels. The literature on value addition to fruit derived waste is diverse. This paper presents a review of fruit waste derived bioactives. The financial challenges encountered in existing methods are also discussed.

Well-defined and biocompatible hydrogels with toughening and reversible photoresponsive properties

In the present study, novel hydrogels with extremely high strength, reversible photoresponsive and excellent biocompatible properties were prepared. The functional hydrogels were synthesized from a well-defined poly (ethylene glycol) polymer with spiropyran groups at a given position (PEG-SP) via a Cu(i)-catalyst Azide-Alkyne Cycloaddition (CuAAC) reaction. The molecular structures of the sequential intermediates for PEG-SP hydrogel preparation were verified by (1)HNMR and FT-IR. The mechanical property, swelling ratio, compression strength, surface hydrophilicity, and biocompatibility of the resulting hydrogel were characterized. Since spiropyran is pivotal to the switch in hydrophilicity on the hydrogel surface, the swelling ratio of PEG-SP hydrogel under Vis irradiation has a major decrease (155%). Before and after UV light irradiation, the contact angle of the hydrogel has a change of 13.8°. The photoresponsive property of this hydrogel was thus demonstrated, and such a property was also shown to be reversible. The well-defined PEG-SP hydrogel can also sustain a compressive stress of 49.8 MPa without any macro- or micro-damage, indicating its outstanding mechanical performance. Furthermore, it possessed excellent biocompatibility as demonstrated by its performance in an in vivo porcine subcutaneous implantation environment. No inflammation was observed and it got along well with the adjacent tissue. The above features indicate that PEG-SP hydrogels are promising as an implantable matrix for potential applications in biomaterial.

Xylan hemicellulose improves chitosan hydrogel for bone tissue regeneration

The hemicellulose xylan, which has immunomodulatory effects, has been combined with chitosan to form a composite hydrogel to improve the healing of bone fractures. This thermally responsive and injectable hydrogel, which is liquid at room temperature and gels at physiological temperature, improves the response of animal host tissue compared with similar pure chitosan hydrogels in tissue engineering models. The composite hydrogel was placed in a subcutaneous model where the composite hydrogel is replaced by host tissue within 1 week, much earlier than chitosan hydrogels. A tibia fracture model in mice showed that the composite encourages major remodeling of the fracture callus in less than 4 weeks. A non-union fracture model in rat femurs was used to demonstrate that the composite hydrogel allows bone regeneration and healing of defects that with no treatment are unhealed after 6 weeks. These results suggest that the xylan/chitosan composite hydrogel is a suitable bone graft substitute able to aid in the repair of large bone defects.

An enzyme-mediated in situ hydrogel based on polyaspartamide derivatives for localized drug delivery and 3D scaffolds

An enzyme-mediated in situ hydrogel based on polyaspartamide derivatives is prepared for localized drug delivery and 3D scaffolds.

Injectable hydrogel systems crosslinked by horseradish peroxidase

Hydrogels are widely used as reservoirs in drug delivery and scaffolds for tissue engineering. In particular, injectable hydrogel systems, which are formed by physical, chemical, or enzyme-mediated crosslinking reactions in situ, offer the advantages of minimal invasiveness, ease of application, and void-filling property. Examples of these hydrogels are provided in the first part of this paper. In the second part, hydrogels that are formed by the enzymatic activity of horseradish peroxidase (HRP) are highlighted. HRP catalyzes the crosslinking reaction of polymer-phenol conjugates in the presence of hydrogen peroxide (H2O2), resulting in hydrogels with tunable gelation rate and crosslinking density. The catalytic mechanism of the HRP-mediated crosslinking reaction is discussed in detail, and the recent biomedical applications of the HRP-crosslinked hydrogels are described. Lastly, the concerns associated with HRP-mediated crosslinking and the future outlook of HRP-crosslinked hydrogels are addressed.

Continuous propionic acid production with Propionibacterium acidipropionici immobilized in a novel xylan hydrogel matrix

The cell immobilization potential of a novel xylan based disulfide-crosslinked hydrogel matrix reinforced with cellulose nanocrystals was studied with continuous cultivation of Propionibacterium acidipropionici using various dilution rates. The cells were immobilized to hydrogel beads suspended freely in the fermentation broth or else packed into a column connected to a stirred tank reactor. The maximum propionic acid productivity for the combined stirred tank and column was 0.88gL(-1)h(-1) and the maximum productivity for the column was determined to be 1.39gL(-1)h(-1). The maximum propionic acid titer for the combined system was 13.9gL(-1) with a dilution rate of 0.06h(-1). Dry cell density of 99.7gL(-1) was obtained within the column packed with hydrogel beads and productivity of 1.02gL(-1)h(-1) was maintained in the column even with the high circulation rate of 3.37h(-1).

Production of cationic xylan-METAC copolymer as a flocculant for textile industry

Xylan is a part of hemicelluloses of woody materials and can be converted to value-added products such as flocculants for the textile industry. To assess the production of flocculants from hemicelluloses of woody materials, xylan was selected as a model and rendered cationic via copolymerization. In this study, the copolymerization reaction of xylan and [2-(methacryloyloxy) ethyl] trimethylammonium chloride (METAC) was optimized. The optimum parameters were 3mol/mol METAC/xylose, 3h reaction time, 80°C reaction temperature, pH 7 and 25g/L xylan concentration. The copolymer was characterized by a charge density analyzer, viscometer, gel permeation chromatography (GPC), light scattering instrument, Fourier transform infrared spectroscopy (FTIR) and an elemental analyzer. The application of the cationic xylan copolymer as a flocculant to decolorize the simulated reactive orange 16 azo-dye wastewater was evaluated. The results confirmed that, by having 160mg/L xylan-METAC concentration in the dye solution with the concentration of 100mg/L, 97.8% of dye could be removed.

Bienzymatically crosslinked gelatin/hyaluronic acid interpenetrating network hydrogels: preparation and characterization

The bienzymatically crosslinked IPN hydrogels composed of gelatin/hyaluronic acid have excellent biocompatibility and mechanical properties.

Comparative study on temperature/pH sensitive xylan-based hydrogels: their properties and drug controlled release

Temperature/pH dual-responsive hydrogels as a new intestinal-targeted carriers were prepared by the grafting copolymerization of xylan possessing different functional groups with AM and NIPAm via ultraviolet irradiation.