Ultrasound-assisted extraction of pectins from grape pomace using citric acid: A response surface methodology approach

The high-value and sustainable utilization of grape pomace: A review

A large portion of global grape production has been utilized for wine production, accompanied by tremendous pressure to dispose grape pomace. To achieve circular economy, the high-value recycling of grape pomace must be considered. The social level barriers to circular economy promotion are also important constraints, like the acceptability of upcycled products. The main components of grape pomace and their utilization are summarized, and critical reviews of green extraction methods analyzed the key points of grape pomace recycling process to achieve the goal of sustainability in the production process, culminating in discussions of the factors affecting the acceptability of upcycled products. Grape pomace bioactive substances have higher added value. To realize its green extraction, various emerging technologies need to be made a comprehensive choice. Nevertheless, the acceptability of upcycled products is influenced by personal, context and product factors, optimizing them is essential to remove the constraints of circular economy development.

Role of acemannan and pectic polysaccharides in saline-water stress tolerance of Aloe vera (Aloe barbadensis Miller) plant

This study investigates the impact of water and salinity stress on Aloe vera, focusing on the role of Aloe vera polysaccharides in mitigating these stresses. Pectins and acemannan were the most affected polymers. Low soil moisture and high salinity (NaCl 80 mM) increased pectic substances, altering rhamnogalacturonan type I in Aloe vera gel. Aloe vera pectins maintained a consistent 60 % methyl-esterification regardless of conditions. Interestingly, acemannan content rose with salinity, particularly under low moisture, accompanied by 90 to 150 % acetylation increase. These changes improved the functionality of Aloe vera polysaccharides: pectins increased cell wall reinforcement and interactions, while highly acetylated acemannan retained water for sustained plant functions. This study highlights the crucial role of Aloe vera polysaccharides in enhancing plant resilience to water and salinity stress, leading to improved functional properties.

Transformation of agricultural wastes into functional oligosaccharides using enzymes and emerging technologies

INTRODUCTION

Pectin-oligosaccharides (POS) serve diverse purposes as a food ingredient, antimicrobial and biostimulant in plants, and their functionality is linked to the degree of esterification. Grape and broccoli wastes emerge as environmentally friendly alternatives to obtaining pectin, serving as a sustainable source to producing POS. For example, microwaves have proven to be an effective and sustainable method to extract polysaccharides from plant matrices.

OBJECTIVE

This work aims to use grape and broccoli wastes as alternative sources for obtaining pectin by microwave-assisted extraction and biotransformation into POS, which possess biological properties.

MATERIAL AND METHODS

The extraction conditions were identified at a power of 400 W, 300 s for the extraction of pectin from grape pomace and broccoli waste. Biotransformation of pectins into POS, using commercial enzyme preparations (Viscozyme L and Pectinase). Characterisation was carried out by Fourier-transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy.

RESULTS

Physicochemical analysis indicated grape pomace and broccoli waste pectins had galacturonic acid content of 63.81 ± 1.67 and 40.83 ± 2.85 mg 100 mg-1, low degree of esterification of 34.89% and 16.22%, respectively. Biotransformation of pectins into POS resulted in a 20% hydrolysis rate. The main enzymatic activity was polygalacturonase for the degradation of the main structure of the pectin.

CONCLUSION

Production of POS from agro-industrial wastes by emerging technologies, such as the combined use of microwave-assisted extraction and enzymatic processes, represents an alternative method for the generation of bioactive compounds with distinctive properties suitable for different applications of interest.

Response Surface Methodology for Optimization of Ultrasound-Assisted Antioxidants Extraction from Blackberry, Chokeberry and Raspberry Pomaces

An investigation of the ultrasound-assisted extraction (UAE) of polyphenol-rich aqueous extracts from blackberry, chokeberry and raspberry pomaces was carried out. The aim of the study was to choose optimal conditions for UAE in order to obtain extracts rich in phenolic compounds. The optimization was carried out based on response surface methodology. The variable conditions were amplitude of ultrasound wave and extraction time, whereas responses were total polyphenol content and antioxidant capacity. Based on the ANOVA analysis, mathematical models were fitted and verified. The most effective conditions of amplitude and time were 98% and 5.00 min, 78% and 10.32 min and 90% and 11.56 min for blackberry pomace, chokeberry pomace and raspberry pomace, respectively. The actual results obtained in optimized conditions were comparable to the results predicted by the models. Additionally, the anthocyanin content in extracts was determined in the high-performance liquid chromatography assay. It was proven that response surface methodology could be a useful tool in the optimization of UAE processes for obtaining polyphenol-rich extracts from berry fruit pomaces.

Structural and flow rheological properties of pumpkin pectic polysaccharide extracted by citric acid

The present study aimed to investigate the structural and physicochemical characteristics of acid-extracted pumpkin pectic polysaccharide (AcPP) and to evaluate their flow rheological properties. AcPP was extracted from pumpkin pulp using the citric acid extraction method. The physicochemical and structural properties were analyzed by chemical methods and instrumental analyses. The obtained results showed that AcPP consisted predominantly of GalA (85.99 %) and small amounts of Rha, Gal, and Ara, with the ratio of HG/RG-I being 81.39/16.75. In addition, AcPP had medium DE (45.34 %) and contained four macromolecular populations with different Mw of 106.03 (main), 10.15, 4.99, and 2.90 kDa. The NMR analysis further confirmed that AcPP contained a linear backbone consisting of α-1,4-linked GalA residues, some of which were partially methyl-esterified. Furthermore, AcPP was amorphous in nature and had favorable thermal stability. The effects of extrinsic factors on the flow rheological properties of AcPP were evaluated. In particular, the high concentrations of CaCl2 (8 mM) and MgCl2 (10 mM) were effective in enhancing the viscosity and non-Newtonian shear-thinning behavior of the AcPP solution. This study elucidates the unique molecular structure of AcPP and suggests the potential of AcPP as a rheology modifier in low-viscous and mineral-reinforced beverages.

Combined application of high pressure and ultrasound in fig paste: effect on bioactive and volatile compounds

The combined impact of high-hydrostatic pressure (HHP) and ultrasound (US) on the cyanidin-3-O-rutinoside (C3R), quercetin-3-O-rutinoside (Q3R), and volatile compounds from fig (Ficus carica) paste was investigated. The HHP increased the content of C3R and Q3R, from 70 to 133 mg/kg fw and 31 to 44 mg/kg fw, respectively. The combination of HHP and US further enhanced the extraction of these bioactive compounds. Specifically, processing fig paste with US for 5 min at 40 °C yielded approximately 250 mg of C3R/kg fw and 45 mg of Q3R/kg fw, after 20 min. More than 25 volatile compounds were identified, with benzaldehyde being the predominant compound, accounting > 75%. Trace amounts of hydroxymethylfurfural (< 0.36 mg/100 g fw) were detected in HHP-processed fig paste. The application of HHP at mild temperatures and short time, combined with US, effectively promotes the content of bioactive compounds present in fig paste without adversely affecting the fruit's volatile compounds.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01410-1.

Development of microencapsulated grape juice powders using black 'Isabel' grape peel pectin and application in jelly formulation with enhanced in vitro bioaccessibility of anthocyanins

In this study, pigmented pectin (grape pectin, GP) was extracted from the peels of black Isabel grapes. This highly methoxylated GP was composed mainly of galacturonic acid, arabinose, and other neutral monosaccharides. Its red color was ascribed to the anthocyanin content, and the main contribution was from malvidin-3-O-glucoside. To improve the yield and color properties of spray-dried Isabel grape juice powders, maltodextrin (MD) was substituted with this colored GP. When 25% of MD was substituted with GP, the powder yield increased from 46.0% to 60.4%, but it decreased to 21% when the substitution was 40%. GP inclusion increased the encapsulation efficiency of total anthocyanin in powders from 55.70% to 88.66%. When this spray-dried grape juice powder containing GP was utilized in a jelly recipe (4%-10%), a higher level of inclusion yielded stronger and more brittle jellies. When the jellies containing varying amounts of GP were subjected to in vitro digestion, the formulation with a higher amount of GP yielded a higher recovery of anthocyanins. In addition to being utilized as a carrier agent for spray-drying applications, this pigmented GP can also be tailored for a variety of applications, such as the development of pH-sensitive edible films and functional beverage formulations.

Properties of lime peel pectin as mainly influenced by ethanol and protein-based purification methods

BACKGROUND

Lime peel, obtained from juice factory waste, is considered as a source of pectin. Lime peel pectin samples, extracted by three extraction procedures of 90 °C heating for 120 min, 90 °C heating for 90 min and then 32 min of ultrasound, and 80 °C heating for 60 min and then 22 min of ultrasound, and purified by two methods using ethanol and sodium caseinate (SC), were prepared and characterized.

RESULTS

The results showed that the purification method significantly affected the lime pectin samples properties. Pectin samples purified with SC had a transparent and film-like appearance, whereas the ethanol-purified pectin samples showed an amorphous and opaque appearance. Pectin samples purified with ethanol showed higher extraction recovery (approximately 20%), whereas the lowest pectin yield was observed for the purification with SC (approximately 10%). Although SC purification did not enhance the pectin yield, it diminished the level of 'non-pectin' components and resulted in purer pectin. The bands at 1045-1076 cm-1 , relating to neutral sugars, had higher intensities in ethanol-purified pectin samples, indicating their higher sugar contents. Also the samples purified with SC exhibited more thermal stability, probably as a result of the presence of protein in their structure.

CONCLUSION

In the present study, under the same or varying extraction conditions, the most important element distinguishing pectins in terms of appearance, physicochemical, thermal and Fourier transform infrared characteristics was the type of purification method. Purification with SC may result in pectins with more non-esterified galacturonic acids from the homogalacturonan fraction. © 2023 Society of Chemical Industry.

Extraction of pectin from watermelon and pomegranate peels with different methods and its application in ice cream as an emulsifier

Pectin extraction from watermelon peel (WP) and pomegranate peel (PP) was carried out using three different extraction methods: classical solvent extraction (CSE), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE). Extraction parameters (pH, temperature, time, and speed/amplitude/power) were optimized to target maximum crude pectin yield (CPY), while the sample-to-solvent ratio (SS) was determined to be fixed at 1:10 w/v at all experiments. CPY was increased by low pH, high temperature, and long time. The pectins obtained at optimum conditions were characterized regarding the physicochemical and rheological properties, and the pectin solutions were found to be typical pseudoplastic fluids. WP pectin extracted with MAE and PP pectin extracted with UAE were determined to have the best emulsifying properties and added to the ice cream formulations. MAE had the maximum CPY of 9.40% for WP (pH = 1.3, 6 min, 596 W) and the best emulsifying properties. UAE had the best emulsifying properties for PP and the CPY was 11.56% in conditions of pH = 1.5, a temperature of 69°C, an extraction time of 29 min, and a 32% amplitude. The use of PP pectin resulted in a significant increase in the apparent viscosity of ice cream mix and also the first dripping time and the hardness of ice cream over commercial emulsifier. Melting properties and hardness values of ice cream with WP pectin were comparatively closer to those of ice cream with commercial emulsifier. On the other hand, the first dripping time and hardness value of ice cream with PP pectin having 60.25 min and 3.84 N, respectively, were higher than those of commercial ice cream having 53.75 min and 2.14 N, respectively. Practical Application: The utilization of WP and PP, which are good sources for pectin production, benefits both a sustainable environment and a sustainable food industry. Pectin extracted from WP and PP as an emulsifier in ice cream can ensure the production of ice creams with good melting properties. Pectin can be used as a healthy, sustainable, and economical alternative emulsifier in the ice cream industry.

Valorization of Grape Pomace as a Renewable Source of Techno-Functional and Antioxidant Pectins

The food industry's increasing demand for new functional ingredients that meet both organoleptic and healthy requirements has driven the exploration of new sources of functional ingredients in agro-industrial by-products. The aim of this work was to valorize grape pomace (Vitis vinifera L. garnacha) as a source of pectins using food-grade extracting agents. Obtained pectins were evaluated for monomeric composition, methyl esterification, molecular weight, water retention, oil-holding capacity, and antioxidant properties. The relatively soft extraction conditions used permitted obtaining low methoxyl pectin (10-42%) enriched in homogalacturonan (38-45%) or rhamnogalacturonan (33-41%) with different branching degrees, molecular weight, and fewer impurities than those found in the scarce previous literature. The relationship between structure and functionality was studied. Among the different pectins obtained, the sample derived from the extraction with sodium citrate could resume the best characteristics, such as pectin purity and higher water retention and oil holding capacity. These results underscore the relevance of grape pomace as a viable alternative source of pectin.

Current progress in valorization of food processing waste and by-products for pectin extraction

Food processing waste and by-products such as peel of citrus fruit, melon, mango, pineapple, etc. and fruit pomace can be utilized for manufacturing of several high-value products. Valorization of these waste and by-products for extraction of pectin, can help offset growing environmental concerns, facilitate value-addition of by-products and their sustainable uses. Pectin has many applications in food industries such as gelling, thickening, stabilizing, and emulsifying agent, and as a dietary fibre. This review elaborates on various conventional and advanced, sustainable pectin extraction techniques, and paints a comparative picture between them considering extraction efficiency, quality, and functionality of the pectin. Conventional acid, alkali, and chelating agents-assisted extraction have been profusely used for pectin extraction, but advanced extraction technologies e.g., enzyme, microwave, supercritical water, ultrasonication, pulse electric field and high-pressure extraction are preferred due to less energy consumption, better quality product, higher yield, and minimal or no generation of harmful effluent.

A Review on the Potential Bioactive Components in Fruits and Vegetable Wastes as Value-Added Products in the Food Industry

The food production industry is a significant contributor to the generation of millions of tonnes of waste every day. With the increasing public concern about waste production, utilizing the waste generated from popular fruits and vegetables, which are rich in high-added-value compounds, has become a focal point. By efficiently utilizing food waste, such as waste from the fruit and vegetable industries, we can adopt a sustainable consumption and production pattern that aligns with the Sustainable Development Goals (SDGs). This paper provides an overview of the high-added-value compounds derived from fruit and vegetable waste and their sources. The inclusion of bioactive compounds with antioxidant, antimicrobial, and antibrowning properties can enhance the quality of materials due to the high phenolic content present in them. Waste materials such as peels, seeds, kernels, and pomace are also actively employed as adsorbents, natural colorants, indicators, and enzymes in the food industry. Therefore, this article compiles all consumer-applicable uses of fruit and vegetable waste into a single document.

Food and fruit waste valorisation for pectin recovery: Recent process technologies and future prospects

Pectin possesses a dual property of resistance and flexibility and thus has diverse commercial value which has generated research interest on this versatile biopolymer. Formulated products using pectin could be useful in food, pharma, foam, plasticiser and paper substitute industries. Pectin is structurally tailor-made for greater bioactivity and diverse applications. Sustainable biorefinery leaves greener footprints while producing high-value bioproducts like pectin. The essential oils and polyphenols obtained as byproducts from a pectin-based biorefinery are useful in cosmetics, toiletries and fragrance industries. Pectin can be extracted from organic sources following eco-friendly strategies, and the extraction techniques, structural alterations and the applications are continually being upgraded and standardized. Pectin has great applications in diverse areas, and its green synthesis is a welcome development. In future, growing industrial application of pectin is anticipated as research orients on biopolymers, biotechnologies and renewable source-based processes. As the world is gradually adopting greener strategies in sync with the global sustainable development goal, active involvement of policy makers and public participation are prime. Governance and policy framing are essential in the transition of the world economy towards circularity since green circular bioeconomy is ill-understood among the public in general and within the administrative circles in particular. Concerted efforts by researchers, investors, innovators, and policy and decision makers to integrate biorefinery technologies as loops within loop of biological structures and bioprocesses is suggested. The review focusses on generation of the different nature of food wastes including fruits and vegetables with cauterization of their components. It discusses the innovative extraction and biotransformation approaches for these waste conversions into value-added products at cost-effective and eco-friendly way. This article compiles numerous effective and efficient and green way pectin extraction techniques with their advantages with varying success in an integrated manner.

Ultrasound-Assisted Extraction and the Encapsulation of Bioactive Components for Food Applications

Various potential sources of bioactive components exist in nature which are fairly underutilized due to the lack of a scientific approach that can be sustainable as well as practically feasible. The recovery of bioactive compounds is a big challenge and its use in food industry to develop functional foods is a promising area of research. Various techniques are available for the extraction of these bioactives but due to their thermolabile nature, there is demand for nonthermal or green technologies which can lower the cost of operation and decrease operational time and energy consumption as compared to conventional methods. Ultrasound-assisted extraction (UAE) is gaining popularity due to its relative advantages over solvent extraction. Thereafter, ultrasonication as an encapsulating tool helps in protecting the core components against adverse food environmental conditions during processing and storage. The review mainly aims to discuss ultrasound technology, its applications, the fundamental principles of ultrasonic-assisted extraction and encapsulation, the parameters affecting them, and applications of ultrasound-assisted extraction and encapsulation in food systems. Additionally, future research areas are highlighted with an emphasis on the energy sustainability of the whole process.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Effect of the duty cycle of the ultrasonic processor on the efficiency of extraction of phenolic compounds from Sorbus intermedia

This paper studies the effect of different ultrasonic parameters on the yield of extraction and antioxidant activity of selected phenolic compounds from Sorbus intermedia berries. The sonication was carried out in two modes: continuous and pulse. In the pulse mode, the samples were sonicated with the following processor settings: 1 s on–2 s off. The effective ultrasonic processor times were 5, 10, and 15 min, and the total extraction times were 15, 30, and 45 min. The results showed that the duty cycle significantly affected the antioxidant activity of the extracts and the yield of chlorogenic acid, rutin, and total flavonoids. Compared to the continuous mode, the pulse ultrasound increased the extraction yield of rutin by 5–27%, chlorogenic acid by 12–29%, and total flavonoids by 8–42%. The effect of the duty cycle on the extraction yield was dependent on the intensity and duration of the ultrasound treatment. The mechanism of the influence of the pulsed ultrasound field on the extraction process has been elucidated. This research clearly demonstrated the superiority of pulsed ultrasound-assisted extraction for production of antioxidants from Sorbus intermedia berries.

The Influence of Extraction Conditions on the Yield and Physico-Chemical Parameters of Pectin from Grape Pomace

Grape pomace is one of the most abundant by-products generated from the wine industry. This by-product is a complex substrate consisted of polysaccharides, proanthocyanidins, acid pectic substances, structural proteins, lignin, and polyphenols. In an effort to valorize this material, the present study focused on the influence of extraction conditions on the yield and physico-chemical parameters of pectin. The following conditions, such as grape pomace variety (Fetească Neagră and Rară Neagră), acid type (citric, sulfuric, and nitric), particle size intervals (<125 µm, ≥125−<200 µm and ≥200−<300 µm), temperature (70, 80 and 90 °C), pH (1, 2 and 3), and extraction time (1, 2, and 3 h) were established in order to optimize the extraction of pectin. The results showed that acid type, particle size intervals, temperature, time, and pH had a significant influence on the yield and physico-chemical parameters of pectin extracted from grape pomace. According to the obtained results, the highest yield, galacturonic acid content, degree of esterification, methoxyl content, molecular, and equivalent weight of pectin were acquired for the extraction with citric acid at pH 2, particle size interval of ≥125−<200 µm, and temperature of 90 °C for 3 h. FT-IR analysis confirmed the presence of functional groups in the fingerprint region of identification for polysaccharide in the extracted pectin.

Antioxidant and anti-inflammatory polyphenols in ultrasound-assisted extracts from salvilla (Buddleja scordioides Kunth)

Salvilla is a widely distributed plant used in treatments against gastrointestinal disorders due to its phenolic antioxidant and anti-inflammatory potential. Major yield and quality of bioactive polyphenols must be obtained with no degradation during suitable processes such as Ultrasound-Assisted Extraction (UAE), which allows an efficient extraction of metabolites at appropriate parameter conditions. Salvilla extractions were made using UAE and aqueous ethanolic solutions. Variables used in UAE were sonication time, wave amplitude and percentage of ethanol in solvent. Extracts were tested for total flavonoids, antioxidant activity (ABTS, FRAP and ORAC) and an identification and quantification of phenolic compounds was carried out by UPLC-PDA-ESI-MS/MS. Once elected the better extraction conditions, an anti-inflammatory test was performed for this treatment. As a result, total flavonoids content in extracts was 147 to 288 µg catechin equivalents/mg of dry salvilla extract. All extracts have shown good antioxidant activity (86 to 280 mM Trolox eq/mg dry salvilla extract). Flavonoids contents by chromatography were higher than hydroxybenzoic and hydroxycinnamic acids specially the flavone, flavanol and flavanone groups. Treatment T6 (75% ethanol, 30% amplitude and 10 min extraction time) was the best extract in terms of significant flavonols, antioxidant activity, and higher anti-inflammatory potential.

Process Efficiency and Energy Consumption during the Ultrasound-Assisted Extraction of Bioactive Substances from Hawthorn Berries

This study investigated the impact of sonication parameters on the efficiency of the extraction of bioactive substances from hawthorn berries. The ultrasonic treatment was performed in two modes: continuous and pulse. In the pulse mode, the samples were sonicated with the following processor settings: 1 s on-2 s off. The effective ultrasonic processor times were 5, 10, and 15 min, and the total extraction times were 15 min, 30 min, and 45 min. The content of total polyphenols and total anthocyanins was determined by a spectrophotometric method. We show that the operating mode of the processor affects extraction efficiency, energy consumption and unit energy inputs. Extraction supported by a pulsating ultrasonic field allowed saving from 20% to 51% of energy with a simultaneous higher efficiency of the process. In addition, we show that the unit energy consumption in the pulsed mode was about 40% to 68% lower than the energy consumption in the case of continuous operation.

Grape pomace treatment methods and their effects on storage

Introduction. Grape pomace is the most important by-product of winemaking that can be used as an additional raw material. There is a need for an optimal storage technology so that pomace can be further processed to obtain new types of products. We aimed to study the effect of grape pomace treatment on its microflora. Study objects and methods. We identified and quantified microflora on the fresh and one-month-stored pomace samples from white and red grape varieties. The samples were exposed to conventional drying at 60–65°C, infrared drying at 60–65°C, as well as sulfitation with sulfur dioxide and sodium metabisulfite. Results and discussion. The pomace microflora can be considered a microbial community. Almost all the samples stored for one month in an open area contained Saccharomyces cerevisiae yeasts, higher concentrations of filmy yeasts of the Candida, Pichia, Hansenula, Hanseniaspora/Kloeckera, and Torulaspora genera, as well as conidia of Mucor, Aspergillus niger, and Penicillium molds. Prevalent bacteria included acetic acid (mainly Acetobacter aceti) and lactic acid (Lactobacillus plantarum, Pediococcus, Leuconostoc) bacteria. These microorganisms significantly changed concentrations of volatile and non-volatile components, decreasing total polysaccharides, phenolic compounds, and anthocyanins 1.7–1.9, 3.7–4.0, and 4.0–4.5 times, respectively. The contents of micromycetes and bacteria in the one-month-stored samples were significantly higher than in the fresh pomace. Predrying and sulfitation decreased bacterial contamination, but to a lesser extent compared to micromycetes. Conclusion. Long-term storage spoiled pomace, leading to significant changes in its chemical composition. Sulfitation reduced microorganism growth during storage, but did not provide long-term preservation (over a month), while pre-drying at 60–65°C promoted longer storage.

Bio Discarded from Waste to Resource

The modern linear agricultural production system allows the production of large quantities of food for an ever-growing population. However, it leads to large quantities of agricultural waste either being disposed of or treated for the purpose of reintroduction into the production chain with a new use. Various approaches in food waste management were explored to achieve social benefits and applications. The extraction of natural bioactive molecules (such as fibers and antioxidants) through innovative technologies represents a means of obtaining value-added products and an excellent measure to reduce the environmental impact. Cosmetic, pharmaceutical, and nutraceutical industries can use natural bioactive molecules as supplements and the food industry as feed and food additives. The bioactivities of phytochemicals contained in biowaste, their potential economic impact, and analytical procedures that allow their recovery are summarized in this study. Our results showed that although the recovery of bioactive molecules represents a sustainable means of achieving both waste reduction and resource utilization, further research is needed to optimize the valuable process for industrial-scale recovery.

Fruit Wastes as a Valuable Source of Value-Added Compounds: A Collaborative Perspective

The by-products/wastes from agro-food and in particular the fruit industry represents from one side an issue since they cannot be disposed as such for their impact on the environment but they need to be treated as a waste. However, on the other side, they are a source of bioactive healthy useful compounds which can be recovered and be the starting material for other products in the view of sustainability and a circular economy addressing the global goal of "zero waste" in the environment. An updated view of the state of art of the research on fruit wastes is here given under this perspective. The topic is defined as follows: (i) literature quantitative analysis of fruit waste/by-products, with particular regards to linkage with health; (ii) an updated view of conventional and innovative extraction procedures; (iii) high-value added compounds obtained from fruit waste and associated biological properties; (iv) fruit wastes presence and relevance in updated databases. Nowadays, the investigation of the main components and related bioactivities of fruit wastes is being continuously explored throughout integrated and multidisciplinary approaches towards the exploitation of emerging fields of application which may allow to create economic, environmental, and social value in the design of an eco-friendly approach of the fruit wastes.

The Food-Materials Nexus: Next Generation Bioplastics and Advanced Materials from Agri-Food Residues

The most recent strategies available for upcycling agri-food losses and waste (FLW) into functional bioplastics and advanced materials are reviewed and the valorization of food residuals are put in perspective, adding to the water-food-energy nexus. Low value or underutilized biomass, biocolloids, water-soluble biopolymers, polymerizable monomers, and nutrients are introduced as feasible building blocks for biotechnological conversion into bioplastics. The latter are demonstrated for their incorporation in multifunctional packaging, biomedical devices, sensors, actuators, and energy conversion and storage devices, contributing to the valorization efforts within the future circular bioeconomy. Strategies are introduced to effectively synthesize, deconstruct and reassemble or engineer FLW-derived monomeric, polymeric, and colloidal building blocks. Multifunctional bioplastics are introduced considering the structural, chemical, physical as well as the accessibility of FLW precursors. Processing techniques are analyzed within the fields of polymer chemistry and physics. The prospects of FLW streams and biomass surplus, considering their availability, interactions with water and thermal stability, are critically discussed in a near-future scenario that is expected to lead to next-generation bioplastics and advanced materials.

Sonication, a Potential Technique for Extraction of Phytoconstituents: A Systematic Review

Traditional extraction techniques have lost their optimum performance because of rising consumer demand and novel technologies. In this regard, several techniques were developed by humans for the extraction of plant materials from various indigenous sources, which are no longer in use. Many of the techniques are not efficient enough to extract maximum plant material. By this time, evolution in extraction has led to development of various techniques including microfiltration, pulsed electric fields, high pressure, microwave assistance, enzyme assistance, supercritical fluid, subcritical fluid and ultrasonication. These innovations in food processing/extraction are known as “Green Food Processing”. These technologies were basically developed by focusing on three universal parameters: simplicity, energy efficiency and economy. These green technologies are practical in a number of different food sectors, mostly for preservation, inhibition of microorganisms, inactivation of enzymes and extraction of plant material. Like the others, ultrasonication could also be used for the said purposes. The primary objective of this review is to confine the potential use of ultrasonication for extraction of oils, pectin and phytochemicals by reviewing the literature systematically.

Current trends and possibilities for exploitation of Grape pomace as a potential source for value addition

Grape pomace (GP) is a low-value by-product that contains a significant amount of high value-added products. The huge amount of non-edible residues of GP wastes (seeds, skins, leaves and, stems) produced by wine industries causes' environmental pollution, management issues as well as economic loss. Studies over the past 15-20 years revealed that GP could serve as a potential source for valuable bioactive compounds like antioxidants, bioactive, nutraceuticals, single-cell protein, and volatile organic compounds with an increasing scientific interest in their beneficial effects on human and animal health. However, the selection of appropriate techniques for the extraction of these compounds without compromising the stability of the extracted products is still a challenging task for the researcher. Based on the current scenario, the review mainly summarizes the novel applications of winery wastes in many sectors such as agriculture, pharmaceuticals, cosmetics, livestock fields, and also the bio-energy recovery system. We also summarize the existing information/knowledge on several green technologies for the recovery of value-added by-products. For the promotion of many emerging technologies, the entrepreneur should be aware of the opportunities/techniques for the development of high-quality value-added products. Thus, this review presents systematic information on value-added by-products that are used for societal benefits concerning the potential for human health and a sustainable environment.

The Potential of Grape Pomace Varieties as a Dietary Source of Pectic Substances

Grape pomace is one of the most abundant solid by-products generated during winemaking. A lot of products, such as ethanol, tartrates, citric acid, grape seed oil, hydrocolloids, bioactive compounds and dietary fiber are recovered from grape pomace. Grape pomace represents a major interest in the field of fiber extraction, especially pectin, as an alternative source to conventional ones, such as apple pomace and citrus peels, from which pectin is obtained by acid extraction and precipitation using alcohols. Understanding the structural and functional components of grape pomace will significantly aid in developing efficient extraction of pectin from unconventional sources. In recent years, natural biodegradable polymers, like pectin has invoked a big interest due to versatile properties and diverse applications in food industry and other fields. Thus, pectin extraction from grape pomace could afford a new reason for the decrease of environmental pollution and waste generation. This paper briefly describes the structure and composition of grape pomace of different varieties for the utilization of grape pomace as a source of pectin in food industry.