Changes of structure and property of alkali soluble hydroxyethyl celluloses (HECs) and their regenerated films with the molar substitution

From agricultural waste residue to wealth support: A magnetically N-heterocyclic carbene functionalized corn cob cellulose as a new stabilizer for Pd catalyst in Suzuki reaction

Because of eco-friendliness, biodegradability and ease of modification, cellulose is deemed as alternative to unrenewable petroleum resources. Nonetheless, it is more indispensable to exploit corn cob cellulose produced from agricultural waste residue as supportive materials in green catalysis. In this study, a new magnetically benzimidazole functionalized cellulose/Fe3O4 derived from corn cob cellulose as a stabilizer agent (Fe3O4@CL-NHC) was prepared, and palladium was immobilized on this stabilizer (Fe3O4@CL-NHC-Pd). The catalyst was fully characterized by different techniques including TEM, SEM, and XPS analyses, etc. The abundant hydroxyl groups of cellulose provided uniform dispersion and high stability of palladium, while Fe3O4 as a support offered simple magnetic separation. High efficiency (up to 99 %) was demonstrated by this biocatalyst under green conditions in relatively short reaction times towards Suzuki reactions. Due to collaborative interactions of N-heterocyclic carbene and hydroxyl groups with palladium, the synthesized complex prevented metal leaching effectively (<1 %). Moreover, the magnetic property of this catalyst (43.0 emu g-1) provides facile recovery of this composite from the reaction mixture with great ease for several times, which overcomes issues of complicated work-up separation. This work offers a promising avenue to enriching the application of biopolymer from agricultural residue in the potential organic transformations.

Antimicrobial Hydroxyethyl-Cellulose-Based Composite Films with Zinc Oxide and Mesoporous Silica Loaded with Cinnamon Essential Oil

Background: Cellulose derivatives are gaining much attention in medical research due to their excellent properties such as biocompatibility, hydrophilicity, non-toxicity, sustainability, and low cost. Unfortunately, cellulose does not exhibit antimicrobial activity. However, derivatives like hydroxyethyl cellulose represent a proper matrix to incorporate antimicrobial agents with beneficial therapeutic effects. Methods: Combining more antimicrobial agents into a single composite material can induce stronger antibacterial activity by synergism. Results: Therefore, we have obtained a hydroxyethyl-cellulose-based material loaded with zinc oxide nanoparticles and cinnamon essential oil as the antimicrobial agents. The cinnamon essential oil was loaded in mesoporous silica particles to control its release. Conclusions: The composite films demonstrated high antibacterial activity against Staphylococcus aureus and Escherichia coli strains, impairing the bacterial cells' viability and biofilm development. Such antimicrobial films can be used in various biomedical applications such as topical dressings or as packaging for the food industry.

Cellulose Structures as a Support or Template for Inorganic Nanostructures and Their Assemblies

Cellulose is the most abundant natural polymer and deserves the special attention of the scientific community because it represents a sustainable source of carbon and plays an important role as a sustainable energent for replacing crude oil, coal, and natural gas in the future. Intense research and studies over the past few decades on cellulose structures have mainly focused on cellulose as a biomass for exploitation as an alternative energent or as a reinforcing material in polymer matrices. However, studies on cellulose structures have revealed more diverse potential applications by exploiting the functionalities of cellulose such as biomedical materials, biomimetic optical materials, bio-inspired mechanically adaptive materials, selective nanostructured membranes, and as a growth template for inorganic nanostructures. This article comprehensively reviews the potential of cellulose structures as a support, biotemplate, and growing vector in the formation of various complex hybrid hierarchical inorganic nanostructures with a wide scope of applications. We focus on the preparation of inorganic nanostructures by exploiting the unique properties and performances of cellulose structures. The advantages, physicochemical properties, and chemical modifications of the cellulose structures are comparatively discussed from the aspect of materials development and processing. Finally, the perspective and potential applications of cellulose-based bioinspired hierarchical functional nanomaterials in the future are outlined.

Degradation of carboxymethylcellulose using ultrasound and β-glucanase: Pathways, kinetics and hydrolysates' properties

In order to provide an efficient way to degrade carboxymethylcellulose (CMC), three pathways were investigated: enzymolysis, combination of ultrasound pretreatment and enzymolysis, and sonoenzymolysis. Effects of these treatments on enzymatic kinetics, degradation kinetics and properties of degraded CMC were investigated. The degradation degree of CMC was increased by 18.90% and 35.73% with ultrasound pretreatment (at an intensity of 24 W/mL for 30 min) and sonoenzymolysis (at an intensity of 9 W/mL for 50 min), compared with that obtained under the traditional enzymolysis. Analysis of kinetics demonstrated that ultrasound, both pretreatment and combined with β-glucanase, could accelerate CMC degradation. Measurements of rheological properties, molecular weight and structures of CMC hydrolysates revealed that ultrasound broke the glycosidic bond of CMC chains without changing its primary structure. The sonoenzymolysis process was the most efficient method to degrade CMC, with potential to provide a way to obtain CMC with lowest molecular weight or viscosity.

Effects of coagulation conditions on structure and properties of cellulose-based fibers from aqueous NaOH solvent

Hydroxyethyl cellulose (HEC) fibers with low degree of substitution were prepared by wet spinning of solutions in 8wt% NaOH solvent, and H₂SO₄/Na₂SO₄/ZnSO₄ solution was chosen as coagulants. The influence of coagulation temperature and H₂SO₄ concentration on structure and mechanical properties of resultant HEC fibers was examined by synchrotron X-ray measurements, scanning electron microscope and tensile tests. The results were analyzed from the perspective of coagulation kinetics by determining coagulation rate and mass transfer rate difference. It is shown that the increase of either coagulation temperature or H₂SO₄ concentration would accelerate the diffusion and coagulation process. The lowest coagulation temperature of 20°C or moderate H₂SO₄ concentration around 10-15wt%, which provided a gentle solidification process, favored the development of regular crystal and oriented structure, uniform and dense inner structure as well as cross sections closer to circular, resulting in HEC fibers with better tensile properties.

Enzymic degradation of hydroxyethyl cellulose and analysis of the substitution pattern along the polysaccharide chain

The enzymatic degradation behavior of hydroxyethyl cellulose (HEC) samples with different molar substitutions (MS) values was investigated. The changes in the molecular structure of HEC treated with enzymatic approach in comparison to the native HEC were studied through nuclear magnetic resonance (NMR), fourier transform infrared spectra (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques and kinetics of degradation was studied by viscometry. The cleavage of HEC chains could be observed from FTIR and kinetics results. Moreover, reduce in molecular weight (Mw) of polymer and liberated glucose concentration was investigated by gel permeation chromatography (GPC) analysis during enzymatic degradation. And all these results indicated that HEC with lower MS is more susceptible to degrade and provided a better understanding of the mechanism operating during enzymatic hydrolysis of HEC by cellulases. Furthermore, by complete degradation and quantification of liberated glucose, the substitution index (SI) and the distribution of substituents along the HEC chain were investigated. The results suggested that the HEC samples differed in hydroxyethyl molar substitutions (MS) and possible distribution of the hydroxyethyl groups. Impressively, our efforts established a facile analytical method for the elucidation of the distribution of substituents along the HEC chain.

Solid polymer electrolyte production from 2-hydroxyethyl cellulose: Effect of ammonium nitrate composition on its structural properties

Addition of doping materials can possibly enhance the ionic conduction of solid polymer electrolyte (SPE). In this work, a new SPE using 2-hydroxyethyl cellulose (2-HEC) incorporated with different ammonium nitrate (NH₄NO₃) composition was prepared via solution casting method. Studies of structural properties were conducted to correlate the ionic conductivity of 2-HECNH₄NO₃ SPE using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. Encouraging result was obtained as the ionic conductivity increased about two orders of magnitude upon addition of 12wt% of NH₄NO₃. XRD analysis shows the most amorphous SPE was obtained at 12-NH₄NO₃. From FTIR spectra, the interactions between 2-HEC and NH₄NO₃ were observed by the shifts of COH peak from 1355cm^-1 to 1330cm^-1 and the presence of new NH peak in the OH region. The spectrum has been validated theoretically using Gaussian software. The results obtained from this study corroborate that the complexes of 2-HEC and NH₄NO₃ responsible to promote the ionic conductivity to the higher value.

Carbon nanotube (CNT) and nanofibrillated cellulose (NFC) reinforcement effect on thermoplastic polyurethane (TPU) scaffolds fabricated via phase separation using dimethyl sulfoxide (DMSO) as solvent

Although phase separation is a simple method of preparing tissue engineering scaffolds, it suffers from organic solvent residual in the scaffold. Searching for nontoxic solvents and developing effective solvent removal methods are current challenges in scaffold fabrication. In this study, thermoplastic polyurethane (TPU) scaffolds containing carbon nanotubes (CNTs) or nanofibrillated cellulose fibers (NFCs) were prepared using low toxicity dimethyl sulfoxide (DMSO) as a solvent. The effects of two solvent removal approaches on the final scaffold morphology were studied. The freeze drying method caused large pores, with small pores on the pore walls, which created connections between the pores. Meanwhile, the leaching and freeze drying method led to interconnected fine pores with smaller pore diameters. The nucleation effect of CNTs and the phase separation behavior of NFCs in the TPU solution resulted in significant differences in the microstructures of the resulting scaffolds. The mechanical performance of the nanocomposite scaffolds with different morphologies was investigated. Generally, the scaffolds with a fine pore structure showed higher compressive properties, and both the CNTs and NFCs improved the compressive properties of the scaffolds, with greater enhancement found in TPU/NFC nanocomposite scaffolds. In addition, all scaffolds showed good sustainability under cyclical load bearing, and the biocompatibility of the scaffolds was verified via 3T3 fibroblast cell culture.