Synthesis of nano silver on cellulosic denim fabric producing yellow colored garment with antibacterial properties

Parsimonious methodology for synthesis of silver and copper functionalized cellulose

Metal nanomaterials, such as silver and copper, are often incorporated into commercial textiles to take advantage of their Antibacterial and antiviral properties. The goal of this study was to identify the most parsimonious method for the synthesis of silver, copper, or silver/copper bimetallic treated textiles. To accomplish this eight different methods were employed to synthesize silver, copper, and silver/copper functionalized cotton batting textiles. Using silver and copper nitrate as precursors, different reagents were used to initiate/catalyze the deposition of metal, including: (1) no additive, (2) sodium bicarbonate, (3) green tea, (4) sodium hydroxide, (5) ammonia, (6, 7) sodium hydroxide/ammonia at a 1:2 and 1:4 ratio, and (8) sodium borohydride. The use of sodium bicarbonate as a reagent to reduce silver onto cotton has not been used previously in literature and was compared to established methods. All synthesis methods were performed at 80 °C for one hour following textile addition to the solutions. The products were characterized by x-ray fluorescence (XRF) analysis for quantitative determination of the metal content and x-ray absorption near edge structure (XANES) analysis for silver and copper speciation on the textile. Scanning electron microscopy (SEM) with energy dispersive x-ray (EDX) and size distribution inductively coupled plasma mass spectrometry (ICP-MS) were used to further characterize the products of the sodium bicarbonate, sodium hydroxide, and sodium borohydride synthesis methods following ashing of the textile. For the silver treatment methods (1 mM Ag +), sodium bicarbonate and sodium hydroxide resulted in the highest amounts of silver on the textile (8900 mg Ag/kg textile and 7600 mg Ag/kg textile) and for copper treatment (1 mM Cu +) the sodium hydroxide and sodium hydroxide/ammonium hydroxide resulted in the highest amounts of copper on the textile (3800 mg Ag/kg textile and 2500 mg Ag/kg textile). Formation of copper oxide was dependent on the pH of the solution, with 4 mM ammonia and other high pH solutions resulting in majority of the copper on the textile existing as copper oxide, with smaller amounts of ionic-bound copper. The identified parsimonious methods will lend themselves to the efficient manufacturing of antibacterial and antiviral textiles, or the development of multifunctionalized smart textiles.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-023-05099-7.

Preparation and shape change of silver nanoparticles (AgNPs) loaded on the dialdehyde cellulose by in-situ synthesis method

With the improvement of medical and health care level in our society, the demand for antibacterial materials is increasing. In this work, we prepared the antibacterial materials by loading silver nanoparticles (AgNPs) on the dialdehyde cellulose (DAC) with in-situ synthesis method. DAC was prepared by pretreating cellulose fiber with sodium metaperiodate (NaIO₄) to convert the hydroxyl group into aldehyde group, and then reacted with silver nitrate (AgNO₃) to obtain AgNPs loaded on DAC. UV-Vis results show that the characteristic absorption peak of AgNPs at 428 nm appeared in the AgNPs-loaded-DAC. It was observed by SEM that the spherical AgNPs were distributed uniformly on the DAC surface without obvious flocculation. The color of DAC was not changed significantly, indicating that a small amount of AgNPs was loaded. In addition, sodium citrate (Na₃C₆H₅O₇) was added in the reaction of DAC and AgNO₃ and its effect on the formation of AgNPs was studied. The results demonstrated that the color of DAC turned deeper and finally dark yellow with reaction time extended. When the reaction time was 60 h, the spherical AgNPs were gradually grown and transformed into triangular prism on the DAC surface. The antibacterial properties of AgNPs showed inhibition zones of 4.90 mm and 7.35 mm (60 h) against Gram-negative (E. coli) and Gram-positive (S. aureus), respectively, which increased by 40.00% and 14.85% compared with spherical AgNPs (2.5 h) obtained without Na₃C₆H₅O₇. The research of AgNPs-loaded cellulose-based materials promotes the development prospect of new nano-antibacterial materials.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10570-022-04692-6.

Sorption of Fluoride and Bacterial Disinfection Property of Biosynthesized Nanofibrous Cellulose Decorated Ag-MgO-Nanohydroxyapatite Composite for Household Water Treatment

An innovative and sustainable approach to integrating modified Ag–MgO–nanohydroxyapatite on a nanofibrous cellulose template (CNF-AgMgOnHaP) as a multifunctional adsorbent via a hydrothermal bioreduction route using Citrus paradisi peel extract was developed and examined. The surface morphology and mineralogical properties of CNF-AgMgOnHaP by UV–vis spectroscopy, SEM-EDS, XRD, FTIR, TEM, and BET techniques are reported. Batch fluoride sorption studies and its disinfection potential against common bacteria in surface water were evaluated. The results showed the successful synthesis of a modified multistructural CNF-AgMgOnHaP composite with an improved BET surface area of 160.17 m²/g. The sorption of fluoride by the adsorbent was found to strongly depend on the different sorption conditions with a maximum F⁻ sorption capacity of 8.71 mg/g at 303 K, and pH of 5 with 0.25 g dosage at 10 min contact time (25 ± 3 °C). Equilibrium fluoride sorption onto the CNF-AgMgOnHaP was best described by the Freundlich isotherm model across all the operating temperatures. The overall kinetic results showed that the adsorption mechanisms not only depend on using the pseudo-second-order process but are also governed by the mass transfer of the adsorbate molecules from the external surface onto the pores of the adsorbent. The thermodynamic parameters revealed that the adsorption process of F⁻ onto CNF-AgMgOnHaP was endothermic and spontaneous at the sorbent/solution interface. The synthesized composite also provides some antibacterial activity against common infectious microbes from contaminated drinking water. The overall results suggested that the CNF-AgMgOnHaP nanocomposite possesses the potential for the simultaneous decontamination of pollutants and microbes in drinking water.

Investigation of Ultrasonic Treatment on Physicochemical, Structural and Morphological Properties of Sodium Alginate/AgNPs/Apple Polyphenol Films and Its Preservation Effect on Strawberry

An antibacterial and anti-oxidation composite film was prepared by a casting method using sodium alginate (SA) and apple polyphenols (APPs) as the base material and glycerol as the plasticizer. Silver nanoparticles (AgNPs) were deposited by ultrasonic-assisted electrospray method. The degree of influence of the addition ratio of SA and AgNPs and different ultrasonic time on the mechanical properties, barrier properties, optical properties, and hydrophilicity of the composite film was explored. The composite films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the SA: AgNPs ratio of 7:3 and the ultrasonic time for 30 min have the best comprehensive performance, and SA/AgNPs/APP films showed the lowest water vapor permeability value of 0.75 × 10⁻¹¹ g/m·s·Pa. The composite film has good strength and softness, with tensile strength (TS) and elongation at break (E) at 23.94 MPa and 29.18%, respectively. SEM images showed that the surface of the composite film was smooth and the AgNPs’ distribution was uniform. The composite film showed broad antibacterial activity, and the antibacterial activity of Escherichia coli (92.01%) was higher than that of Staphylococcus aureus (91.26%). However, due to the addition of APP, its antioxidant activity can reach 98.39%, which has a synergistic effect on antibacterial activity. For strawberry as a model, the results showed that this composite film can prolong the shelf life of strawberries for about 8 days at 4 °C, effectively maintaining their storage quality. Compared with the commonly used PE(Polyethylene film) film on the market, it has a greater fresh-keeping effect and can be used as an active food packaging material.

Electrospinning of Scaffolds from the Polycaprolactone/Polyurethane Composite with Graphene Oxide for Skin Tissue Engineering

Creating scaffolds for skin tissue engineering remain challenging in terms of their mechanical and biological properties. In this paper, we present a study on the nanocomposite polyurethane (PU)/polycaprolactone (PCL) scaffolds with graphene oxide (GO), which were fabricated by using electrospinning method, for potential skin tissue engineering. For this, homogenous and soft PU nanofibers containing varying percent of polycaprolactone (12% and 15%) and nano GO (0.5-4%) were electrospun, respectively, and then characterized by different techniques/assays in vitro. For the scaffold characterization, scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used. The SEM results show the spun scaffolds have 3D porous structure (90%) with the fiber diameter increased with the GO concentration, while the FTIR results confirmed the presence of PU, PCL, and Go in the scaffolds. Also, the biocompatibility, via the cytotoxicity, of the scaffolds was examined by MTT assay with the human skin fibroblast cells, along with their wettability in terms of contact angle. Our results show that the scaffolds are biocompatible to the skin fibroblast cell, illustrating their potential use in skin tissue engineering. Also, our results illustrate that the addition of GO to the PU/PCL composite can increase the wettability (or hydrophilicity) and biocompatibility of scaffolds. Combined together, the nanocomposite PU/PCL scaffolds with GO are promising as biocompatible constructs for skin tissue engineering.

Environmentally responsive and anti-bugs textile finishes - Recent trends, challenges, and future perspectives

Bugs, such as microorganisms and insects, are present in the environment and sometimes can be health-hazardous if the living environment is not maintained following proper hygienic regulations. In the present scenario of increasing public awareness, environmental consciousness, and growing demand for easy-care, and disinfected textiles, the manufacturing of protective and easy-to-care textiles has become a key necessity of the modern world. Comfortable, clean, hygienic, antimicrobial, and insect repelling properties of textile goods are gaining the accelerating research momentum as a basic requirement to produce multifunctional textiles. These functional finishes have numerous applications such as in-home textiles, bed nets, and tenting, camping gear as well as in military uniforms. Synthetic antimicrobial and insect repellents are quite effective against insects and microscopic organisms but are slightly toxic to the human being and the environment. To overcome these problems, researchers are considering natural agents for functional finishes, but their effectiveness is less durable to textile material. Besides needful advantages, the excessive use of dyes in finishing processes heavily required washing cycles and ultimately release various types of hazardous dyes or wasteful effluents in the environment. This review reports the chemical composition and recent developments in textile finishes, particularly antimicrobial and insect repellent textile finishes. A large number of commonly used antimicrobial agents (i.e. chitosan, zwitterionic compounds, silver and silver-based compounds, titanium dioxide nanoparticles, imidazolium salts, triclosan and quaternary ammonium salts) and insect repellent textile finishes (i.e. N‑N‑diethyl‑m‑toluamide, permethrin, cypermethrin, pyrethrum, picaridin, bioallethrin, citriodiol and essential oils) have been presented. Finally, the review is wrapped up with major research gaps/challenges, concluding remarks, and future opportunities in this area of research.

Antioxidant and hepatoprotective role of selenium against silver nanoparticles

Silver nanoparticles (AgNPs) have attracted the most interest in terms of their potential biomedical and industrial applications. However, these nanoparticles have shown their toxic behavior toward environment, living tissues, and organisms. Selenium (Se), an essential trace element, is necessary for various metabolic processes, including protection against oxidative stress and immune function. The present study was undertaken to evaluate the effect of Se against AgNP-induced hepatic oxidative stress. AgNPs were synthesized and then prepared nanoparticles were characterized using various analytical techniques such as UV-visible spectroscopy, X-ray diffraction, and transmission electron microscopy. Rats were administered AgNPs intraperitoneally (5 mg/kg/day) and Se (0.2 mg/kg) was given by gavage. AgNP administration induced hepatic damage as indicated by the serum marker enzymes with reduction in levels of glutathione, and decrease in activities of SOD, CAT, and GSH-peroxidase (P<0.05). Decrease in levels of total antioxidant capacity (TAC) and increase in level of C-reactive protein (CRP) was also observed in AgNP-treated group compared to control group. However, Se markedly attenuated AgNP-induced biochemical alterations, levels of TAC, CRP, and serum transaminases (AST, ALT) (P<0.05). Taken together, these findings suggest that administration of AgNPs produces hepatotoxicity in rats, whereas Se supplementation attenuates these effects.

Development of Synergistic Antimicrobial Coating of p-Aramid Fibers Using Ag Nanoparticles and Glycidyltrimethylammonium Chloride (GTAC) without the Aid of a Cross-Linking Agent

Functional p-aramid fibers that can express antimicrobial activity were produced by simple processing of silver nanoparticles (AgNPs), which are well known as antimicrobial agents, by using glycidyltrimethylammonium chloride (GTAC), a quaternary ammonium salt. P-aramid fibers were treated with GTAC by the pad-dry-cure process and put into an Ag colloid solution for reactions at 40 °C for 90 min to prepare GTAC/AgNPs-treated p-aramid fibers. Through these processes, GTAC was used as a substitute for existing cross-linking agents. The changes in the degree of attachment of AgNPs to the surface of p-aramid fibers were determined using a scanning electron microscope according to parameters such as GTAC concentration, Ag colloid concentration, and reaction temperature. Through this study, the following results were obtained: (i) The tensile strength of AgNPs/GTAC-treated p-aramid fibers was found to be about 80% of that of untreated p-aramid fibers; (ii) Thermogravimetric analysis showed that the thermal stability of p-aramid fibers did not change much after GTAC/AgNPs treatment and (iii) Antimicrobial activity analysis showed that AgNPs/GTAC-treated p-aramid fibers exhibited superior antibacterial properties compared to untreated p-aramid fibers, which may or may not be the effect of GTAC or AgNPs, or both.

A Convenient Ultraviolet Irradiation Technique for Synthesis of Antibacterial Ag-Pal Nanocomposite

In the present work, palygorskite (Pal) was initially subjected to an ion-exchange reaction with silver ions (Pal-Ag(+)). Subsequently, Ag-Pal nanocomposites were assembled by a convenient ultraviolet irradiation technique, using carbon dots (CDs) derived from wool fiber as the reducing agent. The obtained nanocomposites were characterized by powder X-ray diffraction (XRD), ultraviolet-visible (UV-vis) spectroscopy, transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy. The XRD patterns and UV-vis absorption spectra confirmed the formation of the Ag nanoparticles (NPs). Meanwhile, the TEM images showed that the Ag NPs, which exhibited sizes in the range of 3-7 nm, were located on the surface of the Pal nanofiber structures. Furthermore, the antibacterial activity of the nanocomposites was evaluated against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria by applying the disc diffusion method and minimum inhibitory concentration test. Owing to their good antibacterial properties, the Ag-Pal nanocomposites are considered to be a promising bactericide with great potential applications.

Developments in Antibacterial Disinfection Techniques

One of the most daunting challenges facing nations today is controlling the spread of increasingly lethal bacteria. Today, a handful of bacteria can no longer be treated with traditional antibiotics and show antibacterial resistance. In this regard, nanotechnology possesses tremendous potential for the development of novel tools which help prevent and combat the spread of unwanted microorganisms. These tools can provide unique solutions for the challenges of the traditional disinfection methods, such as increased antibacterial activity, cost reduction, biocompatibility and personalized treatment. Despite its great potential, nanotechnology remains in its infancy and continued research efforts are required to achieve its full potential. In this chapter, traditional methods and their associated limitations are reviewed for their efficacy against microbial spread, and potential solutions in nanotechnology are described. A review of the state of the art disinfection techniques using nanotechnology is presented, and promising new areas in the field are discussed.

Simultaneous encapsulation and stabilization of Aloe vera extract on cotton fabric for wound dressing application

Utilization of some herbal products in wound dressing for rapid healing with no side effects is a highly interesting task.