Synthesis of guanidinylated chitosan with the aid of multiple protecting groups and investigation of antibacterial activity

The quantitative molecular weight-antimicrobial activity relationship for chitosan polymers, oligomers, and derivatives

Chitosan and chitosan derivatives can kill pathogenic microorganisms including bacteria and fungi. The antimicrobial activity is dependent on the degree of acetylation, substituent structure, and molecular weight. Over the past four decades, numerous studies have endeavored to elucidate the relationship between molecular weight and the activity against microorganisms. However, investigators have reported divergent and, at times, conflicting conclusions. Here a bilinear equation is proposed, delineating the relationship between antimicrobial activity, defined as log (1/MIC), and the molecular weight of chitosan and chitosan derivatives. Three constants AMin, AMax, and CMW govern the shape of the curve determined by the equation. The constant AMin denotes the minimal activity expected as the molecular weight tends towards zero while AMax represents the maximal activity observed for molecular weights exceeding CMW, the critical molecular weight required for max activity. This equation was applied to analyze data from seven studies conducted between 1984 and 2019, which reported MIC (Minimum Inhibitory Concentration) values against bacteria and fungi for various molecular weights of chitosan and its derivatives. All the 29 datasets exhibited a good fit (R2 ≥ 0.5) and half excellent (R2 ≥ 0.95) fit to the equation. The CMW generally ranged from 4 to 10 KD for datasets with an excellent fit to the equation.

Preparation of biguanidine quaternary ammonium salts grafted chitosan with enhanced antibacterial and antibiofilm activities

N-(4-N'-pyridine-benzylcarbonyl chloride) chitosan (CBPyC), N-p-biguanidine benzoyl chitosan (CSBG), and N-(p-biguanidine -1-pyridine-4-benzylcarbonyl chloride) chitosan (CSQPG) were synthesized. The structures of prepared chitosan derivatives were characterized using nuclear magnetic resonance spectroscopy (NMR) and ultraviolet-visible (UV-vis) spectroscopy, and the degree of substitution was determined through elemental analysis (EA) and evaluated on the basis of the integral values in 1H NMR. The antibacterial activities of chitosan derivatives against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were investigated in vitro using antibacterial rate, minimal inhibitory concentration and minimum bacterial concentration assays. The antibiofilm activity was also assessed using the crystal violet assay. CSQPC exhibited higher antibacterial and antibiofilm activities against E. coli and S. aureus compared to CBPyC and CSBG. The antibacterial rate of CSQPG against E. coli and S. aureus at a concentration of 0.5 mg/mL was 43.3% and 100%, respectively. The biofilm inhibition rate of CSQPG at 0.5 MIC against E. coli and S. aureus was 56.5% and 69.1%, respectively. At a concentration of 2.5 mg/mL, the biofilm removal rates of E. coli and S. aureus were 72.9% and 90.1%, respectively. The antibacterial and antibiofilm activities of CSQPG were better than CSBG and CBPyC, and the combination of guanidine and quaternary ammonium further improved the positive charge density of chitosan and enhanced its antibacterial activity.

Antibacterial efficiency of the curcumin-mediated photodynamic inactivation coupled with L-arginine against Vibrio parahaemolyticus and its application on shrimp

The aim of this study was to investigate the antibacterial potency of a novel photodynamic inactivation (PDI) system with an enhanced bactericidal ability against Vibrio parahaemolyticus in vitro and in vivo. The synergistically bactericidal action of curcumin (Cur) and L-arginine (L-Arg) was firstly investigated, and then a novel curcumin-mediated PDI coupled with L-Arg was developed. Meanwhile, its potent inactivation mechanism against V. parahaemolyticus and preservation effects on shrimp were explored. Results showed that L-Arg disrupted the cell membrane by binding to membrane phospholipids and disrupting iron homeostasis, which helped curcumin to damage DNA and interrupt protein synthesis. Once irradiated by blue LED, the curcumin-mediated PDI produced the reactive oxygen species (ROS) which reacted with L-Arg to generate NO, and the NO was converted to reactive nitrogen species (RNS) with a strong bactericidal ability by consuming ROS. On this basis, the curcumin-mediated PDI coupled with L-Arg potently killed >8.0 Log CFU/mL with 8 μM curcumin, 0.5 mg/mL L-Arg and 1.2 J/cm2 irradiation. Meanwhile, this PDI also effectively inhibited the colour and pH changes, lipids oxidation and protein degradation of shrimp. Therefore, this study proposes a new potent PDI system to control microbial contamination in the food industry.

Strategies for the Preparation of Chitosan Derivatives for Antimicrobial, Drug Delivery, and Agricultural Applications: A Review

Chitosan has received much attention for its role in designing and developing novel derivatives as well as its applications across a broad spectrum of biological and physiological activities, owing to its desirable characteristics such as being biodegradable, being a biopolymer, and its overall eco-friendliness. The main objective of this review is to explore the recent chemical modifications of chitosan that have been achieved through various synthetic methods. These chitosan derivatives are categorized based on their synthetic pathways or the presence of common functional groups, which include alkylated, acylated, Schiff base, quaternary ammonia, guanidine, and heterocyclic rings. We have also described the recent applications of chitosan and its derivatives, along with nanomaterials, their mechanisms, and prospective challenges, especially in areas such as antimicrobial activities, targeted drug delivery for various diseases, and plant agricultural domains. The accumulation of these recent findings has the potential to offer insight not only into innovative approaches for the preparation of chitosan derivatives but also into their diverse applications. These insights may spark novel ideas for drug development or drug carriers, particularly in the antimicrobial, medicinal, and plant agricultural fields.

Polysaccharide-Based Supramolecular Hydrogel Coatings with Corrosion Barrier Zone for Protection of Patina Bronze

Protective coatings for bronze relics should adhere to the basic principles of cultural relic preservation, such as not altering the color and appearance of the artifacts, and being moderately combined with the artifacts to resist erosion due to external environments (such as water and gas). This paper presents the development of a physically crosslinked supramolecular hydrogel produced from guanidinium-based chitosan (GC). The hydrogel exhibits the excellent adsorption protection of bronze, and the addition of clay enhances the water barrier properties of the chitosan film. The supramolecular interaction between sodium polyacrylate/GC/clay confers corrosion buffering capability to the hydrogel coating in corrosive environments, and the gel coating can be self-healing at room temperature for 24 h. The fabricated nanocomposites were comprehensively characterized using various methods (Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, etc.). The electrochemical properties of coated specimens were evaluated, and the impedance spectrum revealed a large impedance arc indicating high charge resistance, which has a corrosion resistance effect.

Totally-green cellulosic fiber with prominent sustained antibacterial and antiviral properties for potential use in spunlaced non-woven fabric production

The worldwide spread of COVID-19 has put a higher requirement for personal medical protective clothing, developing protective clothing with sustained antibacterial and antiviral performance is the priority for safe and sustaining application. For this purpose, we develop a novel cellulose based material with sustained antibacterial and antiviral properties. In the proposed method, the chitosan oligosaccharide (COS) was subjected to a guanylation reaction with dicyandiamide in the presence of Scandium (III) triflate; because of the relatively lower molecular weight and water solubility of the COS, GCOS (guanylated chitosan oligosaccharide) with high substitution degree (DS) could be successfully synthetized without acid application. In this instance, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the GCOS were only 1/8 and 1/4 of that of COS. The introduction of GCOS onto the fiber endowed the fiber with extremely high antibacterial and antiviral performance, showing 100% bacteriostatic rate against Staphylococcus aureus and Escherichia coli and 99.48% virus load reduction of bacteriophage MS2. More importantly, the GCOS modified cellulosic fibers (GCOS-CFs) exhibit excellent sustained antibacterial and antiviral properties; namely, 30 washing cycles had negligible effect on the bacteriostatic rate (100%) and inhibition rate of bacteriophage MS2 (99.0%). Moreover, the paper prepared from the GCOS-CFs still exhibited prominent antibacterial and antiviral activity; inferring that the sheeting forming, press, and drying process have almost no effect on the antibacterial and antiviral performances. The insensitive of antibacterial and antiviral activity to water washing (spunlace) and heat (drying) make the GCOS-CFs a potential material applicable in the spunlaced non-woven fabric production.

Carbohydrate polymer-based nanocomposites for breast cancer treatment

Breast cancer is known as the most common invasive malignancy in women with the highest mortality rate worldwide. This concerning disease may be presented in situ (relatively easier treatment) or be invasive, especially invasive ductal carcinoma which is highly worrisome nowadays. Among several strategies used in breast cancer treatment, nanotechnology-based targeted therapy is currently being investigated, as it depicts advanced technological features able of preventing drugs' side effects on normal cells while effectively acting on tumor cells. In this context, carbohydrate polymer-based nanocomposites have gained particular interest among the biomedical community for breast cancer therapy applications due to their advantage features, including abundance in nature, biocompatibility, straightforward fabrication methods, and good physicochemical properties. In this review, the physicochemical properties and biological activities of carbohydrate polymers and their derivate nanocomposites were discussed. Then, various methods for the fabrication of carbohydrate polymer-based nanocomposites as well as their application in breast cancer therapy and future perspectives were discussed.

Structure-activity relationship for antibacterial chitosan carrying cationic and hydrophobic moieties

To overcome the problem of antibiotic resistance and toxicity of synthetic polymers, herein we report the synthesis of biocompatible polymers which can serve as broad spectrum antimicrobials. A regioselective synthetic method was developed to synthesize N-functionalized chitosan polymers having similar degree of substitution of cationic and hydrophobic functionality with different lipophilic chains. We obtained optimum antibacterial effect by utilizing the combination of cationic and longer lipophilic chain in the polymer, against four bacterial strains. Inhibition and killing of bacteria were more pronounced in Gram positive bacteria than in Gram negative bacteria. Growth kinetics and scanning electron microscopy imaging of the polymer treated bacterial cells confirmed the inhibition of bacterial growth, morphological changes in the structure and membrane disruption in the cells as compared to the growth control for each strain. Further investigation into the toxicity and selectivity of the polymers guided us to develop a structure-activity relationship for this class of biocompatible polymers.

Single-particle electrophoresis for studying the adsorption of cationic polymers onto anionic particles

Understanding the adsorption of polymers onto particles is crucial for many technological and biomedical applications. Even though polymer adsorption on particles is a dynamic process, most experimental techniques can only study the adsorption indirectly, in equilibrium and on the ensemble level. New analysis methods are required to overcome these limitations. We investigated the use of single-particle electrophoresis to study the adsorption kinetics of cationic polymers onto anionic particles and compared the resulting data to a theoretical model. In this approach, the electrophoretic mobility of single polystyrene (PS) particles, exposed to different concentrations of poly(2-guanidinoethyl methacrylate), was measured as a function of time. The polymer adsorption leads to an electrophoretic mobility change of the PS particle over time, from the initial negative value to a positive value at equilibrium. By fitting the kinetics data to the Langmuir model, the adsorption rate, desorption rate and equilibrium constant were determined. Finally, the adsorption kinetics of several other polymers was investigated. This showed that the presented technique enables direct analysis and comparison of the kinetics of polymer adsorption on the single-particle level.

Guanylated Hyperbranched Polylysines with High In Vitro and In Vivo Antifungal Activity

With the rapid growth of fungal infections and the emergence of multi-drug resistant (MDR) fungal strains, new antifungals with novel mechanisms are a pressing need to tackle this emerging health problem. Herein it is reported for the first time that hyperbranched polylysine (HPL) shows antifungal activities against Candida, especially for drug-sensitive and MDR C. albicans strains, and broad-spectrum antibacterial activities against both Gram-negative and Gram-positive bacteria. The high antimicrobial activities are ascribed to the high charge density and compact size of the globular structure of HPL. The in vitro antifungal activities of HPL3 are further enhanced by the modification of amine groups to form guanylated polylysines (HPL3-Gxs). Similar to antimicrobial peptides (AMPs), HPLs and HPL3-Gxs interact with and lyse the membranes of microbes, which mitigates the emergence of drug resistance. HPLs and HPL3-Gxs demonstrate excellent in vivo antimicrobial efficacies against both lethal C. albicans challenge in the invasive candidiasis model and lethal Methicillin resistant Staphylococcus aureus challenge in the peritonitis model, and have potentials as broad-spectrum antimicrobials.

Application Progress of Modified Chitosan and Its Composite Biomaterials for Bone Tissue Engineering

In recent years, bone tissue engineering (BTE), as a multidisciplinary field, has shown considerable promise in replacing traditional treatment modalities (i.e., autografts, allografts, and xenografts). Since bone is such a complex and dynamic structure, the construction of bone tissue composite materials has become an attractive strategy to guide bone growth and regeneration. Chitosan and its derivatives have been promising vehicles for BTE owing to their unique physical and chemical properties. With intrinsic physicochemical characteristics and closeness to the extracellular matrix of bones, chitosan-based composite scaffolds have been proved to be a promising candidate for providing successful bone regeneration and defect repair capacity. Advances in chitosan-based scaffolds for BTE have produced efficient and efficacious bio-properties via material structural design and different modifications. Efforts have been put into the modification of chitosan to overcome its limitations, including insolubility in water, faster depolymerization in the body, and blood incompatibility. Herein, we discuss the various modification methods of chitosan that expand its fields of application, which would pave the way for future applied research in biomedical innovation and regenerative medicine.

Nanomaterials: The New Antimicrobial Magic Bullet

Bacterial infections are a significant cause of mortality and morbidity worldwide, despite decades of use of numerous existing antibiotics and constant efforts by researchers to discover new antibiotics. The emergence of infections associated with antibiotic-resistant bacterial strains, has amplified the pressure to develop additional bactericidal therapies or new unorthodox approaches that can deal with antimicrobial resistance. Nanomaterial-based strategies, particularly those that do not rely on conventional small-molecule antibiotics, offer promise in part due to their ability to dodge existing mechanisms used by drug-resistant bacteria. Therefore, the use of nanomaterial-based formulations has attracted attention in the field of antibiotic therapy. In this Review, we highlight novel and emerging nanomaterial-based formulations along with details about the mechanisms by which nanoparticles can target bacterial infections and antimicrobial resistance. A detailed discussion about types and the activities of nanoparticles is presented, along with how they can be used as either delivery systems or as inherent antimicrobials, or a combination of both. Lastly, we highlight some toxicological concerns for the use of nanoparticles in antibiotic therapies.

The Microstructure, Antibacterial and Antitumor Activities of Chitosan Oligosaccharides and Derivatives

Chitosan obtained from abundant marine resources has been proven to have a variety of biological activities. However, due to its poor water solubility, chitosan application is limited, and the degradation products of chitosan oligosaccharides are better than chitosan regarding performance. Chitosan oligosaccharides have two kinds of active groups, amino and hydroxyl groups, which can form a variety of derivatives, and the properties of these derivatives can be further improved. In this review, the key structures of chitosan oligosaccharides and recent studies on chitosan oligosaccharide derivatives, including their synthesis methods, are described. Finally, the antimicrobial and antitumor applications of chitosan oligosaccharides and their derivatives are discussed.

Chitotriazolan (poly(β(1-4)-2-(1H-1,2,3-triazol-1-yl)-2-deoxy-d-glucose)) derivatives: Synthesis, characterization, and evaluation of antibacterial activity

Here we describe the first synthesis of a new type of polysaccharides derived from chitosan. In these structures, the 2-amino group on the pyranose ring was quantitively replaced by an aromatic 1,2,3-triazole moiety. The 2-amino group of chitosan and di-TBDMS chitosan was converted into an azide by diazo transfer reaction. The chitosan azide and TBDMS-chitosan azide were poorly soluble but could be fully converted to triazoles by "copper-catalysed Huisgen cycloaddition" in DMF or DMSO. The reaction could be done with different alkynes but derivatives lacking cationic or anionic groups were poorly soluble or insoluble in tested aqueous and organic solvents. Derivatives with N,N-dimethylaminomethyl, N,N,N-trimethylammoniummethyl, sulfonmethyl, and phosphomethyl groups linked to the 4-position of the triazole moiety were soluble in water at neutral or basic conditions and could be analyzed by ¹H, ¹³C APT, COSY, and HSQC NMR. The quaternized cationic chitotriazolan's had high activity against S. aureus and E. coli, whereas the anionic chitotriazolan's lacked activity.

Chitosan: A Natural Biopolymer with a Wide and Varied Range of Applications

Although chitin is of the most available biopolymers on Earth its uses and applications are limited due to its low solubility. The deacetylation of chitin leads to chitosan. This biopolymer, composed of randomly distributed β-(1-4)-linked D-units, has better physicochemical properties due to the facts that it is possible to dissolve this biopolymer under acidic conditions, it can adopt several conformations or structures and it can be functionalized with a wide range of functional groups to modulate its superficial composition to a specific application. Chitosan is considered a highly biocompatible biopolymer due to its biodegradability, bioadhesivity and bioactivity in such a way this biopolymer displays a wide range of applications. Thus, chitosan is a promising biopolymer for numerous applications in the biomedical field (skin, bone, tissue engineering, artificial kidneys, nerves, livers, wound healing). This biopolymer is also employed to trap both organic compounds and dyes or for the selective separation of binary mixtures. In addition, chitosan can also be used as catalyst or can be used as starting molecule to obtain high added value products. Considering these premises, this review is focused on the structure and modification of chitosan as well as its uses and applications.

Cationic chitosan derivatives as potential antifungals: A review of structural optimization and applications

The increasing resistance of pathogen fungi poses a global public concern. There are several limitations in current antifungals, including few available fungicides, severe toxicity of some fungicides, and drug resistance. Therefore, there is an urgent need to develop new antifungals with novel targets. Chitosan has been recognized as a potential antifungal substance due to its good biocompatibility, biodegradability, non-toxicity, and availability in abundance, but its applications are hampered by the low charge density results in low solubility at physiological pH. It is believed that enhancing the positive charge density of chitosan may be the most effective approach to improve both its solubility and antifungal activity. Hence, this review mainly focuses on the structural optimization strategy of cationic chitosan and the potential antifungal applications. This review also assesses and comments on the challenges, shortcomings, and prospect of cationic chitosan derivatives as antifungal therapy.

Phosphorus-containing polymers synthesised via nitroxide-mediated polymerisation and their grafting on chitosan by grafting to and grafting from approaches

The phosphorus-based methacrylate monomers (h)MAPC1 have been polymerized by NMP and grafted on chitosan.

Preparation and characterization of arginine-modified chitosan/hydroxypropyl methylcellose antibacterial film

Chitosan and its derivatives are widely used in medical, cosmetic and food fields. In this study, chitosan-N-arginine (CSA) was synthesized and characterized by Fourier-transform infrared (FT-IR), ¹H NMR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). A novel antibacterial composite film consisting of CSA, hydroxypropyl methylcellose (HPMC) and glycerol was then prepared. The transparent and homogeneous film presented good compatibility between CSA and HPMC, confirmed by SEM. The thickness of the film was about 44.8 μm and its moisture content was 23.0%. Antimicrobial evaluation of CSA/HPMC film showed 9.0 mm bacteriostatic diameter zone against E. coli and 10.5 mm one against S. aureus. The film exhibited cell biocompatibility and promoted proliferation with L929 cell cytotoxicity test. Both antibacterial and cytotoxic results showed that the CSA/HPMC film was a promising material for medication, cosmetics and food preservation applications.

Fabrication of Ion-Crosslinking Aminochitosan Nanoparticles for Encapsulation and Slow Release of Curcumin

Curcumin (Cur) has anticancer activities but has poor stability, which can be improved using carrier materials. In this study, chitosan was aminated to increase the number of amino groups on its surface, modified with folic acid (FA), and then made into nanoparticles by ionic crosslinking. Owing to ion interaction, the negatively charged, non-toxic tripolyphosphate (TPP) interacted with the positively charged amino group on the aminated chitosan (AmCS) surface, producing FA-AmCS-TPP nanoparticles, which were then characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectrophotometry (FT-IR), and thermogravimetric analysis (TGA). Their small particle size (175.2 ± 0.99 nm) and good surface positive potential (+42.4 mV) are beneficial for carrying antitumor drugs. We subsequently investigated whether coating of Cur by AmCS allows slow drug release by FA-AmCS-TPP nanoparticles in different pH environments, and estimated the Cur loading efficiency (EE-Cur). Our results showed that the cumulative release rate of Cur at 48 h was 56.2%, and that the EE-Cur reached 94.26 ± 0.91% with nanoparticles composed of 0.10 g AmCS, 10.0 mg FA, 10.0 mg TPP, and 15.0 mg Cur. Additionally, cytotoxicity experiments showed that the Cur/FA-AmCS-TPP nanoparticles had good targeting ability for tumor cells. Therefore, the non-toxic targeted composite nanoparticles had potential as a new antitumor agent that can overcome the limitations of Cur.

Preparation of the Hybrids of Hydrotalcites and Chitosan by Urea Method and Their Antimicrobial Activities

Hybrid nano-supra molecular structured materials can boost the functionalityof nano- or supra-molecular materials by providing increased reactivity and conductivity, or by simply improving theirmechanical stability. Herein, the studies in materials science exploring hybrid systems are investigated from the perspective of two important related applications: healthcare andfood safety.Interfacing phase strategy was applied, and ZnAl layered double hydroxide-chitosan hybrids, prepared by the urea method (U-LDH/CS), were successfully synthesized under the conditions of different chitosan(CS) concentrations with a Zn/Al molar ratio of 5.0. The structure and surface properties of the U-LDH/CS hybrids were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectrometer(FTIR), scanningelectronmicroscopy(SEM), ultravioletvisible(UV-Vis), and zero point charge (ZPC) techniques, where the effect of CS concentration on the structure and surface properties was investigated. The use of the U-LDH/CS hybrids as antimicrobial agents against Escherichia coli, Staphylococcus aureus,and Penicilliumcyclopiumwasinvestigated in order to clarify the relationship between microstructure and antimicrobial ability. The hybrid prepared in a CS concentration of 1.0 g∙L^-1 (U-LDH/CS₁) exhibited the best antimicrobial activity and exhibited average inhibition zones of 24.2, 30.4, and 22.3mm against Escherichia coli, Staphylococcus aureus, and Penicilliumcyclopium, respectively. The results showed that the appropriate addition of CS molecules could increase antimicrobial ability against microorganisms.

Bio-Based Polymers with Antimicrobial Properties towards Sustainable Development

This article concisely reviews the most recent contributions to the development of sustainable bio-based polymers with antimicrobial properties. This is because some of the main problems that humanity faces, nowadays and in the future, are climate change and bacterial multi-resistance. Therefore, scientists are trying to provide solutions to these problems. In an attempt to organize these antimicrobial sustainable materials, we have classified them into the main families; i.e., polysaccharides, proteins/polypeptides, polyesters, and polyurethanes. The review then summarizes the most recent antimicrobial aspects of these sustainable materials with antimicrobial performance considering their main potential applications in the biomedical field and in the food industry. Furthermore, their use in other fields, such as water purification and coating technology, is also described. Finally, some concluding remarks will point out the promise of this theme.

Antibacterial Effects of Chitosan/Cationic Peptide Nanoparticles

This study attempted to develop chitosan-based nanoparticles with increased stability and antibacterial activity. The chitosan/protamine hybrid nanoparticles were formed based on an ionic gelation method by mixing chitosan with protamine and subsequently cross-linking the mixtures with sodium tripolyphosphate (TPP). The effects of protamine on the chemical structures, physical properties, and antibacterial activities of the hybrid nanoparticles were investigated. The antibacterial experiments demonstrated that the addition of protamine (125 µg/mL) in the hybrid nanoparticles (500 µg/mL chitosan and 166.67 µg/mL TPP) improved the antimicrobial specificity with the minimum inhibitory concentration (MIC) value of 31.25 µg/mL towards Escherichia coli (E. coli), while the MIC value was higher than 250 µg/mL towards Bacillus cereus. The chitosan/protamine hybrid nanoparticles induced the formation of biofilm-like structure in B. cereus and non-motile-like structure in E. coli. The detection of bacterial cell ruptures showed that the inclusion of protamine in the hybrid nanoparticles caused different membrane permeability compared to chitosan nanoparticles and chitosan alone. The chitosan/protamine nanoparticles also exhibited lower binding affinity towards B. cereus than E. coli. The results suggested that the hybridization of chitosan with protamine improved the antibacterial activity of chitosan nanoparticles towards pathogenic E. coli, but the inhibitory effect against probiotic B. cereus was significantly reduced.

Balancing antimicrobial activity with biological safety: bifunctional chitosan derivative for the repair of wounds with Gram-positive bacterial infections

Because of the balance between antimicrobial activity and biological safety, the bifunctional chitosan derivative could control infections and promote healing simultaneously.

Biguanidine functional chitooligosaccharide modified reverse osmosis membrane with improved anti-biofouling property

The COSG-modified RO membrane with excellent anti-adhesive and antimicrobial properties was successfully fabricated by second interfacial polymerization.

Microwave Assisted Preparation of Antimicrobial Chitosan with Guanidine Oligomers and Its Application in Hygiene Paper Products

Guanidinylated chitosan (GCS) was prepared by grafting guanidine oligomers onto chitosan under microwave irradiation. The structure of GCS characterized by FT-IR and ¹H NMR verified the covalent bonding between the guanidine oligomers and chitosan; the effects of molar ratio, reaction temperature, and time were investigated and the degree of substitution of GCS reached a maximum of 25.5% under optimized conditions in this work. The resulting GCS showed significantly enhanced antimicrobial activities. The results obtained from the dynamic UV absorption of Escherichia coli (E. coli) and atomic force microscopy (AFM) revealed that the deactivation of E. coli by GCS was due to the destructing of the cell membrane and the prompt release of cytoplasm from the bacterial cells. The adsorption of GCS onto cellulose fibers and the antimicrobial efficiency of the hygiene papers with GCS were also investigated. Microwave irradiation as a green assisted method was applied to promote this reaction. This facile approach allowed chitosan to be guanidinylated without tedious preparation procedures and thus broadened its application as a biocompatible antimicrobial agent.

Synthesis, Characterization, and Bactericidal Evaluation of Chitosan/Guanidine Functionalized Graphene Oxide Composites

In response to the wide spread of microbial contamination induced by bacterial pathogens, the development of novel materials with excellent antibacterial activity is of great interest. In this study, novel antibacterial chitosan (CS) and polyhexamethylene guanidine hydrochloride (PHGC) dual-polymer-functionalized graphene oxide (GO) (GO-CS-PHGC) composites were designed and easily fabricated. The as-prepared materials were characterized by Fourier transform infrared (FTIR), X-ray photoelectron spectrometer (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA) and Raman spectroscopy. Their antibacterial capability towards bacterial strains was also studied by incubating both Gram-negative bacteria and Gram-positive bacteria in their presence. More significantly, the synergistic antibacterial action of the three components was assayed, and the findings implied that the as-prepared GO-CS-PHGC shows enhanced antibacterial activity when compared to its single components (GO, CS, PHGC or CS-PHGC) and the mixture of individual components. Not only Gram-negative bacteria but also Gram-positive bacteria are greatly inhibited by GO-CS-PHGC composites. The minimum inhibitory concentration (MIC) value of GO-CS-PHGC against E. coli was 32 μg/mL. With the powerful antibacterial activity as well as its low cost and facile preparation, GO-CS-PHGC has potential applications as a novel antibacterial agent in a wide range of biomedical uses.

Intrinsically Antibacterial Poly(ionic liquid) Membranes: The Synergistic Effect of Anions

The development of materials with intrinsically antimicrobial activities has attracted great interest. Herein, we report the synthesis of free-standing and robust poly(ionic liquid) (PIL) membranes with high antibacterial activities by in situ photo-cross-linking of an ionic liquid monomer and followed by anion-exchange with an amino acid (l-proline (Pro) or l-tryptophan (Trp)). The resultant PIL-based membranes with excellent robustness exhibit high antimicrobial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) and present no significant hemolysis and cytotoxicity toward human red blood and skin fibroblast cells, as well as low adsorption of bovine serum albumin. The synthesized PIL-Trp membranes exhibit the highest antibacterial efficiency due to the synergistic attributes of both imidazolium cation and Trp^- anion. Furthermore, all the PIL-based membranes exhibit long-term antibacterial stability, which demonstrates clinical feasibility in topical applications.