Controlled release of acetylsalicylic acid from polythiophene/carrageenan hydrogel via electrical stimulation

Irreversible and Self-Healing Electrically Conductive Hydrogels Made of Bio-Based Polymers

Electrically conductive materials that are fabricated based on natural polymers have seen significant interest in numerous applications, especially when advanced properties such as self-healing are introduced. In this article review, the hydrogels that are based on natural polymers containing electrically conductive medium were covered, while both irreversible and reversible cross-links are presented. Among the conductive media, a special focus was put on conductive polymers, such as polyaniline, polypyrrole, polyacetylene, and polythiophenes, which can be potentially synthesized from renewable resources. Preparation methods of the conductive irreversible hydrogels that are based on these conductive polymers were reported observing their electrical conductivity values by Siemens per centimeter (S/cm). Additionally, the self-healing systems that were already applied or applicable in electrically conductive hydrogels that are based on natural polymers were presented and classified based on non-covalent or covalent cross-links. The real-time healing, mechanical stability, and electrically conductive values were highlighted.

Hyaluronic Acid and Graphene Oxide-incorporated Hyaluronic Acid Hydrogels for Electrically Stimulated Release of Anticancer Tamoxifen Citrate

Transdermal drug delivery is the transport of drug across the skin and into the systemic circulation. Patch is a one of transdermal device that is used to attach on skin and contains drug. The drug matrices from hyaluronic acid (HA) and graphene oxide (GO) incorporated HA hydrogel were fabricated for the release of tamoxifen citrate (TMX) as the anticancer drug under applied electrical field. The pristine HA hydrogels as the matrix and GO as the drug encapsulation host were fabricated for transdermal patch by the solution casting using citric acid as the chemical crosslinker. In vitro drug release experiment was investigated by utilizing the modified Franz-diffusion cell under the effects of crosslinking ratio, electric potential, and GO. The TMX release behaviors from the hydrogels were found to be from the three mechanisms: the pure Fickian diffusion; the anomalous or non-Fickian diffusion; and Super case II transport depending on the crosslinking conditions. The TMX diffusion and release amount from the pristine HA hydrogels were increased with smaller crosslinking ratios. With applied electrical potential, the enhanced TMX diffusion and release amount were observed when compared to that without due to the electro-repulsive force. Furthermore, the TMX diffusion from the HA hydrogel with GO as the drug encapsulation host was higher by two orders of magnitude than without GO.

Translational Applications of Hydrogels

Advances in hydrogel technology have unlocked unique and valuable capabilities that are being applied to a diverse set of translational applications. Hydrogels perform functions relevant to a range of biomedical purposes-they can deliver drugs or cells, regenerate hard and soft tissues, adhere to wet tissues, prevent bleeding, provide contrast during imaging, protect tissues or organs during radiotherapy, and improve the biocompatibility of medical implants. These capabilities make hydrogels useful for many distinct and pressing diseases and medical conditions and even for less conventional areas such as environmental engineering. In this review, we cover the major capabilities of hydrogels, with a focus on the novel benefits of injectable hydrogels, and how they relate to translational applications in medicine and the environment. We pay close attention to how the development of contemporary hydrogels requires extensive interdisciplinary collaboration to accomplish highly specific and complex biological tasks that range from cancer immunotherapy to tissue engineering to vaccination. We complement our discussion of preclinical and clinical development of hydrogels with mechanical design considerations needed for scaling injectable hydrogel technologies for clinical application. We anticipate that readers will gain a more complete picture of the expansive possibilities for hydrogels to make practical and impactful differences across numerous fields and biomedical applications.

Conducting polymer hydrogels as a sustainable platform for advanced energy, biomedical and environmental applications

Environmentally friendly polymeric materials and derivative technologies play increasingly important roles in the sustainable development of our modern society. Conducting polymer hydrogels (CPHs) synergizing the advantageous characteristics of conventional hydrogels and conducting polymers are promising to satisfy the requirements of environmental sustainability. Beyond their use in energy and biomedical applications that require exceptional mechanical and electrical properties, CPHs are emerging as promising contaminant adsorbents owing to their porous network structure and regulable functional groups. Here, we review the currently available strategies for synthesizing CPHs, focusing primarily on multifunctional applications in energy storage/conversion, biomedical engineering and environmental remediation, and discuss future perspectives and challenges for CPHs in terms of their synthesis and applications. It is envisioned to stimulate new thinking and innovation in the development of next-generation sustainable materials.

Conductive poly(2-ethylaniline) dextran-based hydrogels for electrically controlled diclofenac release

Transdermal drug delivery systems (TDDS) are used as an alternative route to deliver drugs into the blood system for therapy. The matrix materials that have been widely used in TDDS are hydrogels. The dextran hydrogels were prepared by the solution casting using trisodium trimetaphosphate (STMP) as the crosslinking agent, and diclofenac sodium salt (Dcf) as the anionic model drug. Poly(2-ethylaniline) (PEAn) was successfully synthesized and embedded into the dextran hydrogel as the drug encapsulation host. The in-vitro release of Dcf from the hydrogels was investigated using a modified Franz-Diffusion cell in a phosphate-buffered saline (PBS) solution at the pH of 7.4 and at 37 °C for a period of 24 h, under the effects of crosslinking ratios, dextran molecular weights, electric potentials, and the conductive polymer PEAn. The release mechanism of Dcf from the dextran hydrogels and the composite without electrical potential was the diffusion controlled mechanism or the Fickian diffusion. Under applied electrical potentials, the release mechanism was a combination between the Fickian diffusion and the matrix swelling. The Dcf diffusion coefficients from the dextran hydrogels without electrical potential increased with decreasing crosslinking ratio and molecular weight. Under electrical potentials, the corresponding diffusion coefficients were much higher due mainly to the electro-repulsive force between the negatively charged electrode and the negatively charged dextran and the induced dextran expansion. For the Dcf-loaded PEAn/dextran composite, the diffusion coefficient was enhanced by two orders of magnitude when the electric potential was applied, specifically illustrating the unique features of PEAn as an efficient drug encapsulation host without electric field, and as a drug release enhancer under electric field through the reduction reaction.

Electrical-Driven Release and Migration of Herbicide Using a Gel-Based Nanocomposite

In this work, an electrical-driven release and migration glyphosate (EDRMG) was fabricated using a nanocomposite made up of attapulgite (ATP), glyphosate (Gly), and calcium alginate (CA). Therein, ATP-CA acted as a nanonetwork-structured carrier to efficiently load plenty of Gly to form porous ATP-Gly-CA hydrogel spheres (actually EDRMG-0.5) via a cross-linking reaction. The pores in EDRMG-0.5 hydrogel spheres were enlarged under an electric field because of the Coulomb force of the anionic CA polymer, and the release of negatively charged Gly from the spheres could be driven by the electric field force. Thus, EDRMG-0.5 exhibited a great electroresponsively controlled-release property, which was confirmed by a pot experiment. Importantly, the EDRMG-0.5 hydrogel spheres had fine biocompatibility on fish and mice, displaying good biosafety. This work provides a low cost and promising approach to control Gly release, deliver Gly precisely, and improve utilization efficiency, which might have a high application value.

Rational Design of Microfabricated Electroconductive Hydrogels for Biomedical Applications

Electroconductive hydrogels (ECHs) are highly hydrated 3D networks generated through the incorporation of conductive polymers, nanoparticles, and other conductive materials into polymeric hydrogels. ECHs combine several advantageous properties of inherently conductive materials with the highly tunable physical and biochemical properties of hydrogels. Recently, the development of biocompatible ECHs has been investigated for various biomedical applications, such as tissue engineering, drug delivery, biosensors, flexible electronics, and other implantable medical devices. Several methods for the synthesis of ECHs have been reported, which include the incorporation of electrically conductive materials such as gold and silver nanoparticles, graphene, and carbon nanotubes, as well as various conductive polymers (CPs), such as polyaniline, polypyrrole, and poly(3,4-ethylenedioxyythiophene) into hydrogel networks. Theses electroconductive composite hydrogels can be used as scaffolds with high swellability, tunable mechanical properties, and the capability to support cell growth both in vitro and in vivo. Furthermore, recent advancements in microfabrication techniques such as three dimensional (3D) bioprinting, micropatterning, and electrospinning have led to the development of ECHs with biomimetic microarchitectures that reproduce the characteristics of the native extracellular matrix (ECM). In addition, smart ECHs with controlled structures and healing properties have also been engineered into devices with prolonged half-lives and increased durability. The combination of sophisticated synthesis chemistries and modern microfabrication techniques have led to engineer smart ECHs with advanced architectures, geometries, and functionalities that are being increasingly used in drug delivery systems, biosensors, tissue engineering, and soft electronics. In this review, we will summarize different strategies to synthesize conductive biomaterials. We will also discuss the advanced microfabrication techniques used to fabricate ECHs with complex 3D architectures, as well as various biomedical applications of microfabricated ECHs.

Development and functional characterization of composite freeze dried wafers for potential delivery of low dose aspirin for elderly people with dysphagia

The impact of demographic ageing is likely to be of major significance in the coming decades due to low birth rates and higher life expectancy. Older people generally require more prescribed medicines due to the presence of multiple conditions such as dysphagia which can make swallowing medicines challenging. This study involves the development, characterization and optimization of composite wafers for potential oral and buccal delivery of low dose aspirin to prevent thrombosis in elderly patients with dysphagia. Blank (BLK) wafers (no loaded drug) were initially formulated by dissolving combinations of metolose (MET) with carrageenan (CAR) and MET with low molecular weight chitosan (CS) in different weight ratios in water, to identify optimum polymer combinations. However, drug loaded (DL) wafers were prepared using 45% v/v ethanol to help complete solubilization of the aspirin. The formulations were characterized using texture analyzer (hardness, mucoadhesion), scanning electron microscopy (SEM), X-ray diffractometry (XRD), attenuated total reflectance - Fourier transform infrared (ATR-FTIR), differential scanning calorimetry (DSC), thermogravimetric analyzer (TGA), and swelling capacity. Wafers with higher total polymer concentration were more resistant to penetration (MET:CAR 1:1 samples B2, C2) and MET:CS 1:1 (sample E2) and MET:CS 3:1 (sample F2) and also depended on the ratios between the polymers used. From the characterization, samples C2, B2, E2 and F2 showed the most ideal characteristics. XRD showed that BLK wafers were amorphous, whilst the DL wafers were crystalline due to the presence of aspirin. SEM confirmed the presence of pores within the polymer matrix of the BLK wafers, whilst DL wafers showed a more compact polymeric matrix with aspirin dispersed over the surface. The DL wafers showed a good flexibility required for transportation and patient handling and showed higher swelling capacity and adhesion values with phosphate buffer saline (PBS) than with simulated saliva (SS). Drug dissolution studies showed that aspirin was rapidly released in the first 20 min and then continuously over 1 h. FTIR confirmed the interaction of aspirin with the polymers evidenced by peak shifts around 1750 cm^-1 and the broad peak between 2500 and 3300 cm^-1. Lyophilized CAR: CS 1:3 (sample DL13), MET:CS 1:3 (sample DL8) and MET:CAR 3:1 (sample DL1) wafers seem to be a very promising system for the administration of low dose aspirin for older patients with dysphagia.

Carrageenan based hydrogels for drug delivery, tissue engineering and wound healing

Carrageenan is a class of naturally occurring sulphated polysaccharides, which is currently a promising candidate in tissue engineering and regenerative medicine as it resemblances native glycosaminoglycans. From pharmaceutical drug formulations to tissue engineered scaffolds, carrageenan has broad range of applications. Here we provide an overview of developing various forms of carrageenan based hydrogels. We focus on how these fabrication processes has an effect on physiochemical properties of the hydrogel. We outline the application of these hydrogels not only pertaining to sustained drug release but also their application in bone and cartilage tissue engineering as well as in wound healing and antimicrobial formulations. Administration of these hydrogels through various routes for drug delivery applications has been critically reviewed. Finally, we conclude by summarizing the current and future outlook that promotes the seaweed-derived polysaccharide as versatile, promising biomaterial for a variety of bioengineering applications.