NMR characterization of sodium carboxymethyl cellulose: Substituent distribution and mole fraction of monomers in the polymer chains

Adsorption study on the formation of interfacial layers based on birch glucuronoxylans

Glucuronoxylans (GX), particularly crude fractions obtained by pressurized hot water extraction of birch wood, act as potent emulsifiers and stabilizers against physical separation and lipid oxidation. Herein, we studied the adsorption of GX on hydrophobic interfaces to correlate their multicomponent character towards the formation of interfacial layers in emulsions. Dynamic interfacial tension (DIFT) and quartz crystal microgravimetry with dissipation monitoring (QCM-D) were applied to various GX fractions and the results compared with those from cellulose-based emulsifiers. The roles of residual lignin and polysaccharides are discussed considering the formation of interfacial layers during emulsification. The DIFT of the different GXs reached quasi-equilibrium faster as the lignin concentration increased, implying a correlation between the rate of adsorption and the residual lignin content. The effect of NaCl addition was more pronounced in polysaccharide-rich fractions, indicating that the polysaccharide fraction modulated the effect of ionic strength. QCM-D showed that despite the fast adsorption exhibited by the lignin-rich GX extract in the DIFT curves, the adsorbed materials were lightweight, suggesting that the polysaccharide fraction built the bulk of the interfacial layer. These results provide a foundation towards understanding the role of GX in interfacial stabilization beyond traditional plant-based counterparts.

Carboxymethyl cellulose-based photothermal film: A sustainable packaging with high barrier and tensile strength for food long-term antibacterial protection

Traditional packaging materials feed the growing global food protection. However, these packaging materials are not conducive to environment and have not the ability to kill bacteria. Herein, a green and simple strategy is reported for food packaging protection and long-term antibacterial using carboxymethylcellulose-based photothermal film (CMC@CuS NPs/PVA) that consists of carboxymethyl cellulose (CMC) immobilized copper sulfide nanoparticles (CuS NPs) and polyvinyl alcohol (PVA). With satisfied oxygen transmittance (0.03 cc/m2/day) and water vapor transmittance (163.3 g/m2/day), the tensile strength, tear strength and burst strength reached to 3401.2 N/m, 845.7 mN and 363.6 kPa, respectively, which could lift 4.5 L of water. The composite film had excellent photothermal conversion efficiency and photothermal stability. Under the irradiation of near infrared (NIR), it can rapidly heated up to 197 °C within 25 s. The antibacterial analysis showed that the inhibition rate of composite film against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) could all reach >99 %. Furthermore, the synthesized CuS NPs was well immobilized and the residual rate of copper kept 98.7 % after 10 days. Noticeably, the composite film can preserve freshness of strawberries for up to 6 days. Therefore, the composite film has potential application for food antibacterial protection.

Preparation and characterization of carboxymethylated Aureobasidium pullulans β-(1 → 3, 1 → 6)-glucan and its in vitro antioxidant activity

Aureobasidium pullulans β-(1 → 3, 1 → 6)-glucan (APG) has a high degree of β-(1 → 6)-glucosyl branching and a regular triple helical structure similar to that of schizophyllan. In this study, APG was carboxymethylated to different degrees of substitution (DS = 0.51, 1.0, and 2.0, denoted CMAPG 1-3, respectively) using a heterogeneous reaction. With increasing DS, the triple-helix structure drastically decreased and converted to a random coil structure in CMAPG 3. Further, aqueous solutions of CMAPG changed from pseudoplastic fluids to perfect Newtonian liquids with increasing DS, indicating that the intra- and intermolecular hydrogen bonds had been cleaved by the substituents to form a random coil structure. In addition, APG and CMAPG solutions exhibited scavenging ability against hydroxyl, organic, and sulfate radicals. It was also found that the carboxymethylation of APG drastically enhanced the organic radical scavenging ability. On the basis of the relationship between the DS and radical scavenging ability of the CMAPG samples, we believe hydroxyl and organic radicals were preferably scavenged by the donation of hydrogen atoms from the glucose rings and the methylene moieties of the carboxymethyl groups, respectively. Considering the obtained results, CMAPG and APG are expected to have applications in pharmaceuticals, functional foods, and cosmetics as antioxidant polysaccharides.

Complexation between chitosan and carboxymethyl cellulose in weakly acidic, neutral, and weakly alcaline media

The interaction between carboxymethyl cellulose and partially reacetylated chitosan soluble in acidic and alkaline aqueous media is studied by light scattering and isothermal titration calorimetry in a wide pH range. It is shown that the formation of polyelectrolyte complexes (PEC) can occur in the pH range of 6-8, while this pair of polyelectrolytes loses the ability to complexation upon transition to a more alkaline medium. The revealed dependence of the observed enthalpy of interaction on the ionization enthalpy of the buffer indicates the participation of proton transfer from the buffer substance to chitosan and its additional ionization in the binding process. This phenomenon is first observed in a mixture of a weak polybase chitosan and a weak polyacid. The possibility to obtain soluble nonstoichiometric PEC by a direct mixing of the components in a weakly alkaline medium is shown. The resulting PECs are polymolecular particles in shape close to homogeneous spheres with a radius of about 100 nm. The obtained results are promising for creating of biocompatible and biodegradable drug delivery systems.

An intumescent flame-retardant system based on carboxymethyl cellulose for flexible polyurethane foams with outstanding flame retardancy, antibacterial properties, and mechanical properties

A novel and eco-friendly intumescent flame-retardant system based on sodium carboxymethyl cellulose (CMC) was established for wide-used flexible polyurethane foams (FPUFs). FPUF-(APP₆CMC₁)GN₁ with extremely uniform coatings extinguished and reached the UL-94 V-0 rating, and presented an improvement of thermal insulation properties. Moreover, there was a 58 % reduction in peak heat release rate for FPUF-(APP₆CMC₁)GN₁ compared with that of FPUF, and the microstructure analysis of char residues indicated that a perfect intumescent char layer had formed on the surface of FPUFs. Especially, CMC and GN enhanced the compactness and stability of char layers. Therefore, little volatile production was generated under the protection of physical layers in the high temperature as evaluated during the thermal degradation processes. Meanwhile, the flame-retardant FPUFs remained the ideal mechanical properties and obtained excellent antibacterial properties, and the antibacterial rates of E.coli and S.aureus were 99.9 % (FPUF-(APP₆CMC₁)GN₁). This work provides an eco-friendlier strategy for the design of multi-function FPUFs.

Evaluating the Impact of Cellulose Extraction via Traditional and Ionosolv Pretreatments from Domestic Matchstick Waste on the Properties of Carboxymethyl Cellulose

Carboxymethyl cellulose (CMC) is a hydrophilic derivative of cellulose whose large volumes have been used in textile processing, protective coatings, detergents, papers, and drilling fluids, while cellulose gum, which is the purified form of CMC, has extensive applications in food, cosmetic, and pharmaceutical industries. Therefore, this work reflects the production of CMC by extracting cellulose with traditional and ionosolv methods from domestic matchstick waste, providing an in-depth view of the overall process where two different kinds of cellulose were obtained from two different pretreatments, and the influence of cellulose on the profile of CMC was checked. All of the procedures have been performed under optimized conditions to reduce the cost and maximize the productiveness. The results depict that cellulose extracted by the ionosolv method using a protic ionic liquid, tetramethylguanidinium hydrogen sulfate (TMG-HSO₄), is more degraded than that extracted by the traditional sulfide method using sodium sulfide (Na₂S) and sodium hydroxide (NaOH). Thus, the produced CMC-2 via ionic liquid-extracted cellulose has more yield, DS (2.3), purity (98.5%), and solubility with less salt and moisture contents than CMC-1 produced by the conventional method due to an effective substitution of the hydroxyl group by the carboxymethyl group. Further, instrumental analyses like FTIR, XRD, ¹H NMR, ¹³C NMR, and SEM emphasize the results that CMC-2 has more reduction of the hydroxyl peak in FTIR, a more amorphous structure in XRD, intense peaks in NMR, and the roughness of the surface in SEM.

Carboxymethylation of Desmodium styracifolium Polysaccharide and Its Repair Effect on Damaged HK-2 Cells

Objective

Desmodium styracifolium is the best traditional medicine for treating kidney calculi in China. This study is aimed at increasing the carboxyl (-COOH) content of D. styracifolium polysaccharide (DSP0) and further increasing its antistone activity.

Methods

DSP0 was carboxymethylated with chloroacetic acid at varying degrees. Then, oxalate-damaged HK-2 cells were repaired with modified polysaccharide, and the changes in biochemical indices before and after repair were detected.

Results

Three modified polysaccharides with 7.45% (CDSP1), 12.2% (CDSP2), and 17.7% (CDSP3) -COOH are obtained. Compared with DSP0 (-COOH content = 1.17%), CDSPs have stronger antioxidant activity in vitro and can improve the vitality of damaged HK-2 cells. CDSPs repair the cell morphology and cytoskeleton, increase the cell healing ability, reduce reactive oxygen species and nitric oxide levels, increase mitochondrial membrane potential, limit autophagy level to a low level, reduce the eversion of phosphatidylserine in the cell membrane, weaken the inhibition of oxalate on DNA synthesis, restore cell cycle to normal state, promote cell proliferation, and reduce apoptosis/necrosis.

Conclusion

The carboxymethylation modification of DSP0 can improve its antioxidant activity and enhance its ability to repair damaged HK-2 cells. Among them, CDSP2 with medium -COOH content has the highest activity of repairing cells, whereas CDSP3 with the highest -COOH content has the highest antioxidant activity. This difference may be related to the active environment of polysaccharide and conformation of the polysaccharide and cell signal pathway. This result suggests that Desmodium styracifolium polysaccharide with increased -COOH content may have improved potential treatment and prevention of kidney calculi.

Biocompatible nanocarriers for passive transdermal delivery of insulin based on self-adjusting N-alkylamidated carboxymethyl cellulose polysaccharides

In this work, we present biocompatible nanocarriers based on modified polysaccharides capable of transporting insulin macromolecules through human skin without any auxiliary techniques. N-Alkylamidated carboxymethyl cellulose (CMC) derivatives CMC-6 and CMC-12 were synthesized and characterized using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography and thermogravimetric, calorimetric and microscopic techniques. The prepared modified polysaccharides spontaneously assemble into soft nanoaggregates capable of adjusting to both aqueous and lipid environments. Due to this remarkable self-adjustment ability, CMC-6 and CMC-12 were examined for transdermal delivery of insulin. First, a significant increase in the amount of insulin present in lipid media upon encapsulation in CMC-12 was observed in vitro. Then, ex vivo studies on human skin were conducted. Those studies revealed that the CMC-12 carrier led to an enhancement of transdermal insulin delivery, showing a remarkable 85% insulin permeation. Finally, toxicity studies revealed no alteration in epidermal viability upon treatment and the absence of any skin irritation or amplified cytokine release, verifying the safety of the prepared carriers. Three-dimensional (3D) molecular modeling and conformational dynamics of CMC-6 and CMC-12 polymer chains explained their binding capacities and the ability to transport insulin macromolecules. The presented carriers have the potential to become a biocompatible, safe and feasible platform for the design of effective systems for transdermal delivery of bioactive macromolecules in medicine and cosmetics. In addition, transdermal insulin delivery reduces the pain and infection risk in comparison to injections, which may increase the compliance and glycemic control of diabetic patients.

Carboxymethylation modification, characterization, antioxidant activity and anti-UVC ability of Sargassum fusiforme polysaccharide

Taking the degree of substitution (DS) as the index, the carboxymethylation conditions of Sargassum fusiforme polysaccharide (SFP) were studied. According to the single factor experiment results, the optimum experimental conditions were obtained: sodium hydroxide concentration, 15% (20 mL); alkalization temperature, 50 °C; dosage of chloroacetic acid 1.5 g; etherification time, 2 h, and the Carboxymethyl Sargassum fusiforme polysaccharide (CSFP) with the highest DS (0.635) was obtained. And then, the physicochemical properties, structural information and bioactivity of SFP and CSFP were characterized. The SFP and CSFP were composed of four monosaccharides, with a small amount of protein, and their molecular weights to 780.2 kDa and 386.3 kDa respectively. The results of FTIR and NMR showed that the carboxymethyl was successfully grafted onto the C-4 and C-6 of sugar chain. The results of anti UVC experiment showed that SFP and CSFP had a certain negative effect on cell activity, and the degree of damage caused by UVC radiation was weakened, and the anti UVC performance of CSFP was better than that of SFP.

Liquid Systems Based on Tetra(n-butyl)phosphonium Acetate for the Non-dissolving Pretreatment of a Microcrystalline Cellulose (Avicel PH-101)

A non-dissolving pretreatment consisting in the direct contact of cellulose and the ionic liquid tetra(n-butyl)phosphonium acetate, or its fluid mixtures with other phosphonium ionic liquids or with molecular liquids such as ethanol or DMSO, causes a reduction in the crystallinity of the popular microcrystalline cellulose-type Avicel PH-101 under mild conditions. At the same time, the degree of polymerization and the thermal stability of the pretreated Avicel remain essentially unaltered with respect to the untreated Avicel. The diminution of the crystallinity has been related to the increase of the reactivity of the pretreated Avicel samples via analysis of the kinetics of their enzymatic hydrolysis. For selected samples, this improved reactivity has been confirmed through their effective carboxymethylation under a simplified and milder reaction procedure.

Stimuli-Free Transcuticular Delivery of Zn Microelement Using Biopolymeric Nanovehicles: Experimental, Theoretical, and In Planta Studies

This paper reports one-step synthesis of polysaccharide-based nanovehicles, capable of transporting ionic zinc via plant cuticle without auxiliary stimulation. Delivery of highly hydrophilic nutritive microelements via the hydrophobic cuticle of plant foliage is one of the major challenges in modern agriculture. In traditional nutrition via roots, up to 80% of microelements permeate to soil and get wasted; therefore, foliar treatment is an environmentally and economically preferable alternative. Carboxymethyl cellulose (CMC) was modified to amphiphilic N-octylamide-derivative (CMC-8), which spontaneously self-assemble to nanovehicles. It was found that hydrophobic substituents endow a biopolymer with unexpected affinity toward a hydrophilic payload. CMC-8 nanovehicles effectively encapsulated ionic zinc (ZnSO₄) and delivered it upon foliar application to pepper (Capsicum annuum) and tomato (Solanum lycopersicum) plants. Zinc uptake and translocation in plants were monitored by SEM-EDS and fluorescence microscopic methods. In planta monitoring of the carrier was done by labeling nanovehicles with fluorescent carbon dots. Three-dimensional (3-D) structural modeling and conformational dynamics explained the CMC-8 self-assembly mechanism and zinc coordination phenomenon upon introduction of hydrophobic substituents.

Facile Post-Carboxymethylation of Cellulose Nanofiber Surfaces for Enhanced Water Dispersibility

To improve the water dispersibility of cellulose nanofibers without deteriorating the physical properties, it is necessary to develop methods that can selectively modify fiber surfaces. Herein, the reaction conditions for carboxymethylation of the surface of nanofibrillated bacterial cellulose were optimized using chloroacetic acid as an etherification agent. Carboxymethylation in a high-concentration alkaline solution (>5 wt %) in the presence of isopropanol caused the mercerization and carboxymethylation of not only the nanofiber surface but also the cellulose crystals within the nanofiber, resulting in nanofiber swelling and an increase in fiber width. In contrast, with a dilute alkaline aqueous solution (3 wt %), the nanofiber surface was successfully carboxymethylated without changing the inner structure. Furthermore, the morphology was not affected by the carboxymethylation reaction, and no fiber swelling occurred under these reaction conditions. When the substitution reaction proceeded only on the nanofiber surface, the maximum degree of substitution (i.e., the average number of carboxymethyl groups substituted per anhydroglucose residue in cellulose) was 0.091. After surface modification, the nanofibers became more negatively charged, which improved the dispersibility in water through electrostatic repulsion, resulting in a drastic increase in the transparency of the nanofiber dispersion. This method provides a general approach for the surface modification of cellulose nanofibers to increase water dispersibility.

The effect of carboxymethylation on the macromolecular conformation of the (1 → 3)-β -D-glucan of curdlan in water

The chain conformational change in curdlan during carboxymethylation was investigated using nuclear magnetic resonance (NMR), circular dichroism (CD) spectroscopy, and atomic force microscopy (AFM). The distributions of carboxymethyl substituents within anhydroglucose unit (AGU) of CMCD were found to follow the order of OH (6) > OH (4) > OH (2) for CMCD with a low DS and OH (6) > OH (2) > OH (4) for CMCD with relatively high DS. The increased carboxymethylation level induced the chain conformation transition of curdlan from triple helix to random coil in water. The DS of 0.25 was the critical value of chain conformation transition, below which CMCD chains were triple helices. For DS larger than 0.25, CMCD existed in the state of random coils. The intermolecular hydrogen bonding between C2 hydroxyls in AGU sustained the triple helical conformation and stiffness of the polymer chain, which weakened with the increase in DS.

Oleate-modified hyaluronan: Controlling the number and distribution of side chains by varying the reaction conditions

In this work, low molecular weight hyaluronan was chemically modified by oleoyl moieties utilising mixed anhydrides methodology. The activation of oleic acid with benzoyl chloride in organic solvents miscible with water was followed by NMR spectroscopy. The product selectivity correlates with the solvent's Hildebrand solubility parameter. Furthermore, the effect of the solvent for the mixed anhydride formation was elucidated by density functional theory (DFT) and showed that the reactions are faster in acetonitrile or alcohols than in hexane. Furthermore, the solvent demonstrated to control the substituent distribution pattern along HA chain during esterification. An even distribution of substituents was observed in reactions performed in water mixed with ethers. The substituent distribution pattern clearly influenced the aggregation behaviour of amphiphilic HA, controlling the stability of the delivery system, while increasing the encapsulation capacity.

Supramolecular magnetonanohybrids for multimodal targeted therapy of triple-negative breast cancer cells

Despite the undeniable advances in recent decades, cancer remains one of the deadliest diseases of the current millennium, where the triple-negative breast cancer (TNBC) is very aggressive, extremely metastatic, and resistant to conventional chemotherapy. The nanotheranostic approach focusing on targeting membrane receptors often expressed at abnormal levels by cancer cells can be a strategic weapon for fighting malignant tumors. Herein, we introduced a novel "all-in-one nanosoldier" made of colloidal hybrid nanostructures, which were designed for simultaneously targeting, imaging, and killing TNBC cells. These nanohybrids comprised four distinct components: (a) superparamagnetic iron oxide nanoparticles, as bi-functional nanomaterials for inducing ferroptosis via inorganic nanozyme-mediated catalysis and magnetotherapy by hyperthermia treatment; (b) carboxymethyl cellulose biopolymer, as a water-soluble capping macromolecule; (c) folic acid, as the membranotopic vector for targeting folate receptors; (d) and doxorubicin (DOX) drug for chemotherapy. The results demonstrated that this novel strategy was highly effective for targeting and killing TNBC cells in vitro, expressing high levels of folate membrane-receptors. The results evidenced that three integrated mechanisms triggered the deaths of the cancer cells in vitro: (a) ferroptosis, by magnetite nanoparticles inducing a Fenton-like reaction; (b) magneto-hyperthermia effect by generating heat under an alternate magnetic field; and (c) chemotherapy, through the DOX intracellular release causing DNA dysfunction. This "all-in-one nanosoldier" strategy offers a vast realm of prospective alternatives for attacking cancer cells, combining multimodal therapy and the delivery of therapeutic agents to diseased sites and preserving healthy cells, which is one of the most critical clinical challenges faced in fighting drug-resistant breast cancers.

Hydrogel Films Based on Chitosan and Oxidized Carboxymethylcellulose Optimized for the Controlled Release of Curcumin with Applications in Treating Dermatological Conditions

Cross-linked chitosan (CS) films with aldehyde groups obtained by oxidation of carboxymethyl cellulose (CMC) with NaIO4 were prepared using different molar ratios between the CHO groups from oxidized carboxymethyl cellulose (CMCOx) and NH2 groups from CS (from 0.25:1 to 2:1). Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy demonstrated the aldehyde groups' presence in the CMCOx. The maximum oxidation degree was 22.9%. In the hydrogel, the amino groups' conversion index value increased when the -CHO/-NH2 molar ratio, cross-linking temperature, and time increased, while the swelling degree values decreased. The hydrogel films were characterized by scanning electron microscopy (SEM) and FTIR analysis. The curcumin encapsulation efficiency decreases from 56.74% to 16.88% when the cross-linking degree increases. The immobilized curcumin release efficiency (REf%) and skin membrane permeability were evaluated in vitro in two different pH solutions using a Franz diffusion cell, and it was found to decrease when the molar ratio -CH=O/NH2 increases. The curcumin REf% in the receptor compartment was higher at pH = 7.4 (18%- for the sample with a molar ratio of 0.25:1) than at pH = 5.5 (16.5%). The curcumin absorption in the skin membrane at pH = 5.5 (47%) was more intense than at pH = 7.4 (8.6%). The curcumin-loaded films' antioxidant activity was improved due to the CS presence.

Carboxymethylation of polysaccharide isolated from Alkaline Peroxide Mechanical Pulping (APMP) waste liquor and its bioactivity

In recent years, the biological activity of polysaccharides and their derivatives has been widely studied. However, in addition to the natural polysaccharides directly extracted from plants and animals, there are rich polysaccharides in the pulping waste liquor that have not been fully utilized. The extracted polysaccharide from eucalyptus Alkaline Peroxide Mechanical Pulping (APMP) waste liquor was used as a raw material. For the production of carboxymethyl polysaccharide, the effects of temperature (T), the amount of alkali (NaOH) and the amount of etherifying agent (ClCH₂COOH) on the degree of substitution (DS) were investigated, the optimal preparation conditions are: reaction time 2 h, temperature 75 °C, and the molar ratio of polysaccharide, NaOH and ClCH2COOH is 1:1:2, the highest DS is 1.47; FT-IR, NMR and GPC were used to characterize the structure and Molecular weight, the results show that the polysaccharide of APMP waste liquor is rich in xylan, and it was proved that the carboxymethyl substitution was successful and the positions of the substituent group were determined. The characterization and biological activity research of xylan polysaccharide (XP) and carboxymethyl xylan polysaccharide (CMXP), such as antioxidation, moisture absorption/retention, bacteriostatic action and cytotoxicity were discussed. CMXP shows better effects compared with XP.

Cellulose and cellulose derivatives: Different colloidal states and food-related applications

Development of new sources and isolation processes has recently enhanced the production of cellulose in many different colloidal states. Even though cellulose is widely used as a functional ingredient in the food industry, the relationship between the colloidal states of cellulose and its applications is mostly unknown. This review covers the recent progress on illustrating various colloidal states of cellulose and the influencing factors with special emphasis on the correlation between the colloidal states of cellulose and its applications in food industry. The associated unique colloidal states of cellulose like high aspect ratio, crystalline structure, surface charge, and wettability not only promote the stability of colloidal systems, but also help improve the nutritional aspects of cellulose by facilitating its interactions with digestive system. Further studies are required for the rational control and improvement of the colloidal states of cellulose and producing food systems with enhanced functional and nutritional properties.

Substituent distribution of propyl cellulose studied by nuclear magnetic resonance

A series of propyl cellulose (PC) samples with different degrees of substitution (DS) ranging from 0.34 to 2.02 were prepared by a slurry method using propyl bromide as the etherification reagent. Two-dimensional nuclear magnetic resonance (NMR) studies were performed to identify the ¹H and ¹³C chemical shifts of eight anhydroglucose units (AGUs) in PC chains including un-, 2-mono-, 3-mono-, 6-mono-, 2,3-di-, 2,6-di-, 3,6-di-, and 2,3,6-tri-substituted ones. In addition, the mole fractions (χ) of these AGUs in the studied PC samples and their changes with DS were determined from the quantitative ¹³C NMR spectra. The obtained χ-DS profiles were different from those of methyl and ethyl celluloses prepared by a similar slurry method, indicating that the molecular sizes of the substituent reagents utilized for cellulose ethers strongly affected their substituent distributions.

Cu-In-S/ZnS@carboxymethylcellulose supramolecular structures: Fluorescent nanoarchitectures for targeted-theranostics of cancer cells

Although the field of oncology nanomedicine has shown indisputable progress in recent years, cancer remains one of the most lethal diseases, where the early diagnosis plays a pivotal role in the patient's prognosis and therapy. Herein, we report for the first time, the synthesis of biocompatible nanostructures composed of Cu-In-S and Cu-In-S/ZnS nanoparticles functionalized with carboxymethylcellulose biopolymer produced by a green aqueous process. These inorganic-organic colloidal nanohybrids developed supramolecular architectures stabilized by chemical functional groups of the polysaccharide shell with the fluorescent semiconductor nanocrystal core, which were extensively characterized by several morphological and spectroscopical techniques. Moreover, these nanoconjugates were covalently bonded with folic acid via amide bonds and electrostatically conjugated with the anticancer drug, producing functionalized supramolecular nanostructures. They demonstrated nanotheranostics properties for bioimaging and drug delivery vectorization effective for killing breast cancer cells in vitro. These hybrids offer a new nanoplatform using fluorescent polysaccharide-drug conjugates for cancer theranostics applications.

Solvent-Free Synthesis of Amidated Carboxymethyl Cellulose Derivatives: Effect on the Thermal Properties

The present work explores the possibility of chemically modifying carboxymethyl cellulose (CMC), a widely diffused commercial cellulose ether, by grafting of hydrophobic moieties. Amidation of CMC, at high temperature and in heterogeneous conditions, was selected as synthetic tool for grafting on CMC a panel of commercially available amines (bearing long aliphatic chains, alkyl aromatic and heteroaromatic groups, more or less spaced from the cellulose backbone). The reaction was successfully carried out in absence of solvents, catalysts and coupling agents, providing a promising and more sustainable alternative to conventional amidation procedures. Relationships between the chemical structure of the obtained CMC derivatives and their thermal properties were carefully studied, with a particular attention to the thermal behavior. Grafting of aromatic and heteroaromatic alkyl amines, presenting a linear alkyl chain between CMC backbone and a terminal bulky moiety, allowed for efficiently separating the polysaccharide chains, improving their mobility and resulting in a consequent lowering of the glass transition temperature (T_g). The T_g values obtained (90-147 °C) were found to be closely dependent on both the size of the aliphatic spacer, the structure of the aromatic ring and the extent of amidation.

Eco-friendly and biocompatible cross-linked carboxymethylcellulose hydrogels as adsorbents for the removal of organic dye pollutants for environmental applications

In this study, new eco-friendly hydrogel adsorbents were synthesized based on carboxymethylcellulose (CMC, degree of substitution [DS] = 0.7) chemically cross-linked with citric acid (CA) using a green process in aqueous solution and applied for the adsorption of methylene blue (MB). Spectroscopic analyses demonstrated the mechanism of cross-linking through the reaction of hydroxyl functional groups from CMC with CA. These CMC hydrogels showed very distinct morphological features dependent on the extension of cross-linking and their nanomechanical properties were drastically increased by approximately 300% after cross-linking with 20% CA (e.g. elastic moduli from 80 ± 15 to 270 ± 50 MPa). Moreover, they were biocompatible using an in vitro cell viability assay in contact with human osteosarcoma-derived cells (SAOS) for 24 h. These CMC-based hydrogels exhibited adsorption efficiency above 90% (24 h) and maximum removal capacity of MB from 5 to 25 mg g^-1 depending on the dye concentration (from 100 to 500 mg L^-1), which was used as the model cationic organic pollutant. The adsorption of process of MB was well-fit to the pseudo-second-order kinetics model. The desorption of MB by immersion in KCl solution (3 mol L^-1, 24 h) showed a typical recovery efficiency of over 60% with conceivable reuse of these CMC-based hydrogels. Conversely, CMC hydrogels repelled methyl orange dye used as model anionic pollutant, proving the mechanism of adsorption by the formation of charged polyelectrolyte/dye complexes.

Superabsorbent crosslinked carboxymethyl cellulose-PEG hydrogels for potential wound dressing applications

This study focused on the synthesis and comprehensive characterization of environmentally friendly hydrogel membranes based on carboxymethyl cellulose (CMC) for wound dressing and skin repair substitutes. These new CMC hydrogels were prepared with two degrees of functionalization (DS=0.77 and 1.22) and chemically crosslinked with citric acid (CA) for tuning their properties. Additionally, CMC-based hybrids were prepared by blending with polyethylene glycol (PEG, 10wt.%). The results demonstrated that superabsorbent hydrogels (SAP) were produced with swelling degree typically ranging from 100% to 5000%, which was significantly dependent on the concentration of CA crosslinker and the addition of PEG as network modifier. The spectroscopical characterizations indicated that the mechanism of CA crosslinking was mostly associated with the chemical reaction with CMC hydroxyl groups and that PEG played an important role on the formation of a hybrid polymeric network. These hydrogels presented very distinct morphological features depended on the degree of crosslinking and the surface nanomechanical properties (e.g., elastic moduli) were drastically affected (from approximately 0.08GPa to 2.0GPa) due to the formation of CMC-PEG hybrid nanostructures. These CMC-based hydrogels were cytocompatible considering the in vitro cell viability responses of over 95% towards human embryonic kidney cells (HEK293T) used as model cell line.

Determination of mole fractions of ethyl-cellulose-containing monomers by NMR

Three samples of ethyl cellulose (EC) with different degrees of substitution (DS)-0.51, 1.41, and 2.28-were prepared by a slurry method using ethyl bromide as the etherification reagent. ¹H-¹³C HSQC and HSQC-TOCSY NMR spectral analysis allowed for complete assignment of the ¹H and ¹³C chemical shifts, respectively, of eight anhydroglucose units (AGUs) comprising EC chains-un-, 2-mono-, 3-mono-, 6-mono-, 2,3-di-, 2,6-di-, 3,6-di-, and 2,3,6-tri-substituted AGUs. In addition, the lineshape of the quantitative ¹³C NMR spectra of the three EC samples provided change in the mole fractions of these AGUs against DS, making it possible to estimate the reaction mechanism for the production of EC, elucidating reactivities of the hydroxyl groups at the 2, 3, and 6 positions of cellulose and interactions between the substituent groups within the same AGU and vicinal AGUs.

Impact of pre-treatments on properties of lignocelluloses and their accessibility for a subsequent carboxymethylation

In this issue, different chemical (alkaline and sulfite pulping, ozonolysis) and mechanical (vibratory ball milling) pre-treatments were utilized for activating wheat straw and beech sawdust prior to carboxymethylation. Detailed analysis by a range of methods, including Klason-lignin, cellulose and hemicellulose quantification, Powder-X-ray diffraction (PXRD) and attenuated total reflection (ATR) IR spectroscopy, enabled the investigation of material alterations. Subsequently, carboxymethylation was carried out with both untreated and activated materials, allowing the evaluation of activation steps by determining degrees of substitution with carboxymethyl groups (DS_CM). Moreover, carboxymethylation conditions were optimized, realizing high DS_CM of up to 1.05. Results further revealed that ball milling enhanced the subsequent conversion; whereas chemical pre-treatments did not effectively increase material accessibilities. Further studies on chemically untreated materials emphasized that a highly reactive surface was already generated in the course of the carboxymethylation, inter alia through the concomitant dissolution of matrix components.

NMR characterization of sodium carboxymethyl cellulose 2: Chemical shift assignment and conformation analysis of substituent groups

The chemical shifts of the substituent groups of sodium carboxymethyl cellulose (CMC) were assigned by examining a series of CMC samples with different degrees of substitution. Comparative analysis of the (1)H-(13)C heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) spectra allowed the complete assignment of the substituent groups at the 2-, 3-, and 6-positions of the seven substituted monomers comprising the CMC chains, namely, 2-mono-, 3-mono-, 6-mono-, 2,3-di-, 2,6-di-, 3,6-di-, and 2,3,6-tri-substituted anhydroglucose units (AGUs). In addition, the mole fractions of the monomers were determined by lineshape analysis of the carbonyl carbon resonances. The comparison between the chemical shifts of the substituents revealed strong interactions between 2- and 3-substituents in the same AGU, and showed that the steric hindrance by a substituent at the 2- or 3-position suppresses subsequent substitution at the adjacent position.