Preparation of chitosan-TPP sub-micron particles: Critical evaluation and derived recommendations

Chitosan-Based Nanogels Designed for Betanin-Rich Beetroot Extract Transport: Physicochemical and Biological Aspects

Nanotechnology has emerged as a possible solution to improve phytochemicals' limitations. The objective of the present study was to encapsulate beetroot extract (BR Ext) within a chitosan (CS)-based nanogel (NG) designed via ionic crosslinking with tripolyphosphate (TPP) for betanin (Bet) delivery, mainly in the ophthalmic environment. BR Ext is rich in betanin (Bet) according to thin layer chromatography (TLC), UV-visible spectroscopy, and HPLC analysis. NG presented a monodisperse profile with a size of 166 ± 6 nm and low polydispersity (0.30 ± 0.03). ζ potential (ζ-Pot) of +28 ± 1 is indicative of a colloidally stable system. BR Ext encapsulation efficiency (EE) was 45 ± 3%. TEM, with the respective 3D-surface plots and AFM, showed spherical-elliptical-shaped NG. The BR Ext release profile was biphasic with a burst release followed by slow and sustained phase over 12 h. Mucoadhesion assay demonstrated interactions between NG with mucin. Moreover, NG provided photoprotection and pH stability to BR Ext. FRAP and ABTS assays confirmed that BR Ext maintained antioxidant activity into NG. Furthermore, in vitro assays using human retinal cells displayed absence of cytotoxicity as well as an efficient protection against injury agents (LPS and H2O2). NGs are a promising platform for BR Ext encapsulation, exerting controlled release for ophthalmological use.

Negatively charged chitosan nanoparticles prepared by ionotropic gelation for encapsulation of positively charged proteins

The nanoprecipitation of hydrogel nanoparticles by complex coacervation is investigated through a systematic study of the popular chitosan-polyphosphate pair of polyelectrolytes with opposite charges at pH 4. Polyphosphates of varying molar masses and electrical charges are investigated as alternatives to the commonly used tripolyphosphate, so as to assess the influence of the strength of electrostatic interactions on the fabrication possibility, the size of hydrogel particles, and their overall charge. Sodium hexametaphosphate and sodium polyphosphate allow the manufacture of such nanoparticles with either a positive or a negative charge, depending on the chitosan/polyphosphate ratio and the order of mixing. The classical way of mixing by pouring the polyphosphate solution into the chitosan solution yields microparticles. Inverting the order of mixing by pouring the chitosan solution into the polyphosphate solution allows the precipitation of negatively charged nanoparticles with diameters in the range 100-200 nm. Such charge inversion of the chitosan into negative is not possible with the common TPP. It was achieved using sodium hexametaphosphate and sodium polyphosphate having a larger negative charge. Charge inversion of chitosan allows an efficient encapsulation of positively charged proteins with an improved encapsulation efficiency than in the usual TPP-based coacervate. The encapsulation of the bovine serum albumin at pH 4 is given as a case study of a positively charged protein.

Polyelectrolyte-multivalent molecule complexes: physicochemical properties and applications

The complexation of polyelectrolytes with other oppositely charged structures gives rise to a great variety of functional materials with potential applications in a wide spectrum of technological fields. Depending on the assembly conditions, polyelectrolyte complexes can acquire different macroscopic configurations such as dense precipitates, nanosized colloids and liquid coacervates. In the past 50 years, much progress has been achieved to understand the principles behind the phase separation induced by the interaction of two oppositely charged polyelectrolytes in aqueous solutions, especially for symmetric systems (systems in which both polyions have similar molecular weight and concentration). However, in recent years, the complexation of polyelectrolytes with alternative building blocks such as small charged molecules (multivalent inorganic species, oligopeptides, and oligoamines, among others) has gained attention in different areas. In this review, we discuss the physicochemical characteristics of the complexes formed by polyelectrolytes and multivalent small molecules, putting a special emphasis on their similarities with the well-known polycation-polyanion complexes. In addition, we analyze the potential of these complexes to act as versatile functional platforms in various technological fields, such as biomedicine and advanced materials engineering.

Chitosan Grafted Poly (Ethylene Glycol) Methyl Ether Acrylate Particulate Hydrogels for Drug Delivery Applications

Chitosan (CS) crosslinking has been thoroughly investigated, but the chemical reactions leading to submicronic hydrogel formulations pose problems due to various physical/chemical interactions that limit chitosan processability. The current study employs the chemical modification of chitosan by Michael addition of poly (ethylene glycol) methyl ether acrylate (PEGA) to the amine groups to further prepare chitosan particulate hydrogels (CPH). Thus, modified CS is subjected to a double crosslinking, ionic and covalent, in water/oil emulsion. The studied process parameters are polymer concentration, stirring speed, and quantity of ionic crosslinker. The CPH were structurally and morphologically characterized through infrared spectroscopy, scanning electron microscopy, light scattering granulometry, and zeta potential, showing that modified CS allows better control of dimensional properties and morphology as compared with neat CS. Swelling properties were studied in acidic and neutral pH conditions, showing that pH-dependent behavior was maintained after grafting and double crosslinking. The applicability of the prepared materials was further tested for drug loading and in vitro delivery of levofloxacin (LEV), showing excellent capacity. CPH were found to be cyto- and hemocompatible demonstrating their potential for effective use as a controlled release system for different biomedical applications.

Application Progress of Modified Chitosan and Its Composite Biomaterials for Bone Tissue Engineering

In recent years, bone tissue engineering (BTE), as a multidisciplinary field, has shown considerable promise in replacing traditional treatment modalities (i.e., autografts, allografts, and xenografts). Since bone is such a complex and dynamic structure, the construction of bone tissue composite materials has become an attractive strategy to guide bone growth and regeneration. Chitosan and its derivatives have been promising vehicles for BTE owing to their unique physical and chemical properties. With intrinsic physicochemical characteristics and closeness to the extracellular matrix of bones, chitosan-based composite scaffolds have been proved to be a promising candidate for providing successful bone regeneration and defect repair capacity. Advances in chitosan-based scaffolds for BTE have produced efficient and efficacious bio-properties via material structural design and different modifications. Efforts have been put into the modification of chitosan to overcome its limitations, including insolubility in water, faster depolymerization in the body, and blood incompatibility. Herein, we discuss the various modification methods of chitosan that expand its fields of application, which would pave the way for future applied research in biomedical innovation and regenerative medicine.

Fabrication and characterization of chitosan nanoparticles using the coffee-ring effect for photodynamic therapy

BACKGROUND AND OBJECTIVES

Biocompatible nanoparticles have been increasingly used in a variety of medical applications, including photodynamic therapy. Although the impact of synthesis parameters and purification methods is reported in previous studies, it is still challenging to produce a reliable protocol for the fabrication, purification, and characterization of nanoparticles in the 200-300 nm range that are highly monodisperse for biomedical applications.

STUDY DESIGN/MATERIALS AND METHODS

We investigated the synthesis of chitosan nanoparticles in the 200-300 nm range by evaluating the chitosan to sodium tripolyphosphate (TPP) mass ratio and acetic acid concentration of the chitosan solution. Chitosan nanoparticles were also crosslinked to rose bengal and incubated with human breast cancer cells (MCF-7) to test photodynamic activity using a green laser (λ = 532 nm, power = 90 mW).

RESULTS

We established a simple protocol to fabricate and purify biocompatible nanoparticles with the most frequent size occurring between 200 and 300 nm. This was achieved using a chitosan to TPP mass ratio of 5:1 in 1% v/v acetic acid at a pH of 5.5. The protocol involved the formation of nanoparticle coffee rings that showed the particle shape to be spherical in the first approximation. Photodynamic treatment with rose bengal-nanoparticles killed ~98% of cancer cells.

CONCLUSION

A simple protocol was established to prepare and purify spherical and biocompatible chitosan nanoparticles with a peak size of ~200 nm. These have remarkable antitumor activity when coupled with photodynamic treatment.

Design of Experiments to Achieve an Efficient Chitosan-Based DNA Vaccine Delivery System

In current times, DNA vaccines are seen as a promising approach to treat and prevent diseases, such as virus infections and cancer. Aiming at the production of a functional and effective plasmid DNA (pDNA) delivery system, four chitosan polymers, differing in the molecular weight, were studied using the design of experiments (DoE) tool. These gene delivery systems were formulated by ionotropic gelation and exploring the chitosan and TPP concentrations as DoE inputs to maximize the nanoparticle positive charge and minimize their size and polydispersity index (PDI) as DoE outputs. The obtained linear and quadratic models were statistically significant (p-value < 0.05) and non-significant lack of fit, with suitable coefficient of determination and the respective optimal points successfully validated. Furthermore, morphology, stability and cytotoxicity assays were performed to evaluate the endurance of these systems over time and their further potential for future in vitro studies. The subsequent optimization process was successful achieved for the delivery systems based on the four chitosan polymers, in which the smallest particle size was obtained for the carrier containing the 5 kDa chitosan (~82 nm), while the nanosystem prepared with the high molecular weight (HMW) chitosan displayed the highest zeta potential (~+26.8 mV). Delivery systems were stable in the formulation buffer after a month and did not exhibit toxicity for the cells. In this sense, DoE revealed to be a powerful tool to explore and tailor the characteristics of chitosan/pDNA nanosystems significantly contributing to unraveling an optimum carrier for advancing the DNA vaccines delivery field.

Rufinamide-Loaded Chitosan Nanoparticles in Xyloglucan-Based Thermoresponsive In Situ Gel for Direct Nose to Brain Delivery

In 2004, the US FDA approved Rufinamide, an anti-epileptic drug under the brand name Banzel^®. In 2015, Banzel^® received approval for its use in pediatric patients (ages 1–4 years). Rufinamide shows low oral bioavailability due to a low dissolution rate resulting in less of the drug reaching the brain. This has led to the high dose and dosing frequency of Rufinamide. In this work, using the principle of design of experiments (DoE), we have formulated Rufinamide-loaded chitosan nanoparticles and suspended them in a solution of a thermoresponsive polymer–tamarind seed xyloglucan to form a nasal in situ gel for direct nose to brain delivery of Rufinamide. The nanoparticles were characterized for particle size, entrapment efficiency, zeta potential, and physical stability. The in situ gel formulations were characterized for rheological properties, stability, and in vivo plasma and brain pharmacokinetics. Pharmacokinetic parameters were computed for aqueous suspension of nanoparticles and in situ gelling formulation for nanoparticles and compared with the pharmacokinetic parameters of an aqueous suspension of plain Rufinamide. The percentage of direct transport efficiency (% DTE) and direct transport percentage (%DTP) values were calculated for all the formulations. The optimized nanoparticle formulation showed a size of 180 ± 1.5 nm, a zeta potential of 38.3 ± 1.5 mV, entrapment efficiency of 75 ± 2.0%, and drug loading of 11 ± 0.3%. The in situ gelling formulation of nanoparticles showed a solution to the gel transition temperature of 32°C. The %DTE values for aqueous suspension of nanoparticles and in situ gelling formulation for nanoparticles were 988.5 and 1177.3 and the %DTP values were 86.06 and 91.5 respectively.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

Chitosan Nanocarrier Entrapping Hydrophilic Drugs as Advanced Polymeric System for Dual Pharmaceutical and Cosmeceutical Application: A Comprehensive Analysis Using Box-Behnken Design

The objective of the present research is to propose chitosan as a nanocarrier for caffeine—a commonly used drug in combating cellulite. Being a hydrophilic drug, caffeine suffers from insufficient topical penetration upon application on the skin. Chitosan nanoparticles loaded with caffeine were prepared via the ionic gelation technique and optimized according to a Box–Behnken design. The effect of (A) chitosan concentration, (B) chitosan solution pH, and (C) chitosan to sodium tripolyphosphate mass ratio on (Y1) entrapment efficiency percent, (Y2) particle size, (Y3) polydispersity index, and (Y4) zeta potential were studied. Subsequently, the desired constraints on responses were applied, and validation of the optimization procedure was confirmed by the parameters exhibited by the optimal formulation. A caffeine entrapment efficiency percent of 17.25 ± 1.48%, a particle size of 173.03 ± 4.32 nm, a polydispersity index of 0.278 ± 0.01, and a surface charge of 41.7 ± 3.0 mV were attained. Microscopical evaluation using transmission electron microscope revealed a typical spherical nature of the nanoparticles arranged in a network with a further confirmation of the formation of particles in the nano range. The results proved the successful implementation of the Box–Behnken design for optimization of chitosan-based nanoparticles in the field of advanced polymeric systems for pharmaceutical and cosmeceutical applications.

Development and Optimization of Inhalable Levofloxacin Nanoparticles for The Treatment of Tuberculosis

BACKGROUND

Levofloxacin has been recommended by the WHO for the treatment of pulmonary tuberculosis and inhalable delivery of levofloxacin can be advantageous over conventional delivery.

OBJECTIVE

This study aimed to develop and optimize inhalable levofloxacin Loaded Chitosan Nanoparticles (LCN). The objective was to achieve the mean particle size of LCN less than 300nm, sustain the drug release up to 24 h, and achieve MMAD of LCN of less than 5μm.

METHODS

LCN were prepared by ionic gelation of chitosan with sodium tripolyphosphate (STPP) and subsequent lyophilization. A Plackett Burman screening design, 32 full factorial design, and overlay plots were sequentially employed to optimize the formulation. The mean particle size, % entrapment efficiency, in vitro drug release, and minimum inhibitory concentration were all evaluated.

RESULTS

The Pareto chart from the Placket Burman screening design revealed that the concentrations of chitosan and STPP was found to be significant (p < 0.05). Further analysis by 32 full factorial design revealed that F-ratio for each model generated was found to be greater than the theoretical value (p < 0.05), confirming the significance of each model.

CONCLUSION

The optimized formulation showed a mean particle size of 171.5 nm, sustained the drug release up to 24 h in simulated lung fluid, and revealed MMAD of 3.18 μm, which can confirm delivery of the drug to the deep lung region. However, further in vivo studies are required to design a suitable dosage regimen and establish the fate of nanoparticles for safe and efficacious delivery of the drug.

PEGylation and folate conjugation effects on the stability of chitosan-tripolyphosphate nanoparticles

Chitosan-based nanoparticles (Ch-NPs) prepared via ionotropic gelation of Ch with sodium tripolyphosphate (TPP) have been widely examined as potential drug carriers. Yet, recent studies have shown these particles to be unstable in model (pH 7.2-7.4) physiological media. To this end, here we explored the possibility of improving TPP-crosslinked Ch-NP stability through chemical Ch modification. Specifically, Ch samples with either 76% or 92% degrees of deacetylation (DD) were grafted with either polyethylene glycol (PEG), a hydrophilic molecule, or folic acid (F), a hydrophobic molecule. Limited variation in dispersion light scattering intensity, particle size and apparent ζ-potential, and lack of macroscopic precipitation were chosen as analytical evidence of dispersion stability. TPP titrations were performed to determine the optimal TPP:glucosamine molar ratio for preparing particles with near 200-nm diameters, which are desirable for systemic administration of drugs, cellular uptake, and enhancing NP blood circulation. Both DD and Ch modification influenced the particle formation process and the evolution in NP size and ζ-potential upon 30-day storage in virtually salt-free water at 25 °C and 37 °C, where the NPs underwent partial aggregation (along with possible dissolution and swelling) but remained colloidally dispersed. Under model physiological (pH 7.2; 163 mM ionic strength) conditions, however (where the chitosan amine groups were largely deprotonated), the particles quickly became destabilized, evidently due to particle dissolution followed by Ch precipitation. Overall, within the degrees of substitution used for this work (~1% for PEG, and 3 and 6% for F), neither PEG nor F qualitatively improved Ch-NP stability at physiological pH 7.2 conditions. Thus, application of TPP-crosslinked Ch-NPs in drug delivery (even when Ch is derivatized with PEG or F) should likely be limited to administration routes with acidic pH (at which these NPs remain stable).

Effect of organic/inorganic nanoparticles on performance of polyurethane nanocomposites for potential wound dressing applications

This study focuses on the evaluation and modification of polyurethane (PU) membranes containing organic and inorganic nanoparticles for potential use as a wound dressing. For the purpose of PU nanocomposite preparation, chitosan (CS) was converted into nanoparticles by the ionic-gelation method to improve its blending capability with the PU matrix. These CS nanoparticles (nano-CS) were obtained as a hydrophilic organic filler with different contents and were utilized along with inorganic titanium dioxide (TiO₂) nanoparticles in the nanocomposite membrane preparation. The membranes were prepared using phase inversion technique and their microstructure was controlled by manipulating the solvent non-solvent exchange rate. Obtained results demonstrate that addition of polymer solvent to nonsolvent induced a microstructure alteration from finger-like to sponge-like, which is more suitable for fluid uptake and consequently more useful for wound dressing applications. Similar results were obtained by introduction of nanoparticles to membranes. Due to the polar nature of nanoparticles and their effects on PU structure, prepared membranes showed 71.5% improve in swelling when compared to neat PU. Moreover, the reinforcement effect of nanoparticles caused an 18.94% increase in ultimate tensile strength in comparison with bare PU film, while elongation at break was not affected considerably. In addition, prepared PU nanocomposite films showed suitable antibacterial activity of 69% against Staphylococcus aureus and did not show any toxicity to human fibroblast cells. Based on these results, simultaneous use of TiO₂ and chitosan nanoparticles can improve both physical and antibacterial properties of PU as an ideal wound dressing.

Parameters influencing the size of chitosan-TPP nano- and microparticles

Chitosan nanoparticles, produced by ionic gelation, are among the most intensely studied nanosystems for drug delivery. However, a lack of inter-laboratory reproducibility and a poor physicochemical understanding of the process of particle formation have been slowing their potential market applications. To address these shortcomings, the current study presents a systematic analysis of the main polymer factors affecting the nanoparticle formation driven by an initial screening using systematic statistical Design of Experiments (DoE). In summary, we found that for a given chitosan to TPP molar ratio, the average hydrodynamic diameter of the particles formed is strongly dependent on the initial chitosan concentration. The degree of acetylation of the chitosan was found to be the second most important factor involved in the system's ability to form particles. Interestingly, viscosimetry studies indicated that the particle formation and the average hydrodynamic diameter of the particles formed were highly dependent on the presence or absence of salts in the medium. In conclusion, we found that by controlling two simple factors of the polymer solution, namely its initial concentration and its solvent environment, it is feasible to control in a reproducible manner the production and characteristics of chitosan particles ranging in size from nano- to micrometres.

Role of proton balance in formation of self-assembled chitosan nanoparticles

Researchers have explored the ability of chitosan to form nanoparticles, to suit varying applications, ranging from wound-healing to gene delivery. Ionic gelation is a widely used method for formulating chitosan nanoparticles, where self-assembly plays a crucial role. This self-assembly is initially promoted by hydrophilic-hydrophobic parity amongst individual chitosan residues, along with electrostatic and Van der Waals interactions with the cross-linker. However, until now the intrinsic ability of chitosan to self-assemble is not widely studied; hence, we investigate the self-assembly of chitosan, based on proton balance between its protonated and deprotonated residues, to promote facile nanoparticle synthesis. This is one of the first reports that highlights subtle but critical influence of proton balance in the chitosan polymer on the formation of chitosan nanoparticles.