Surface interactions of gold nanorods and polysaccharides: From clusters to individual nanoparticles

Gold nanomakura: nanoarchitectonics and their photothermal response in association with carrageenan hydrogels

Photothermal conversion of light into heat energy is an intrinsic optical property of metal nanoparticles when irradiated using near-infrared radiation. However, the impact of size and shape on the photothermal behaviour of gold nanomakura particles possessing optical absorption within 600-700 nm as well as on incorporation in hydrogels is not well reported. In this study, nanomakura-shaped anisotropic gold nanoparticles (AuNMs) were synthesized via a surfactant-assisted seed-mediated protocol. Quaternary cationic surfactants having variable carbon tail length (n = 16, 14, 12) were used as capping for tuning the plasmon peak of gold nanomakura within a 600-700 nm wavelength. The aspect ratio as well as anisotropy of synthesized gold nanomakura can influence photothermal response upon near-infrared irradiation. The role of carbon tail length was evident via absorption peaks obtained from longitudinal surface plasmon resonance analysis at 670, 650, and 630 nm in CTAB-AuNM, MTAB-AuNM, and DTAB-AuNM, respectively. Furthermore, the impact of morphology and surrounding milieu of the synthesized nanomakuras on photothermal conversion is investigated owing to their retention of plasmonic stability. Interestingly, we found that photothermal conversion was exclusively assigned to morphological features (i.e., nanoparticles of higher aspect ratio showed higher temperature change and vice versa irrespective of the surfactant used). To enable biofunctionality and stability, we used kappa-carrageenan- (k-CG) based hydrogels for incorporating the nanomakuras and further assessed their photothermal response. Nanomakura particles in association with k-CG were also able to show photothermal conversion, depicting their ability to interact with light without hindrance. The CTAB-AuNM, MTAB-AuNM, and DTAB-AuNM after incorporation into hydrogel beads attained up to ≈17.2, ≈17.2, and ≈15.7 °C, respectively. On the other hand, gold nanorods after incorporation into k-CG did not yield much photothermal response as compared to that of AuNMs. The results showed a promising platform to utilize nanomakura particles along with kappa-carrageenan hydrogels for enabling usage on nanophotonic, photothermal, and bio-imaging applications.

Self-assembled ordered AuNRs-modified electrodes for simultaneous determination of dopamine and topotecan with improved data reproducibility

Gold nanomaterials have been widely explored in electrochemical sensors due to their high catalytic property and good stability in multi-medium. In this paper, the reproducibility of the signal among batches of gold nanorods (AuNRs)-modified electrodes was investigated to improve the data stabilization and repeatability. Ordered and random self-assembled AuNRs-modified electrodes were used as electrochemical sensors for the simultaneous determination of dopamine (DA) and topotecan (TPC), with the aim of obtaining an improved signal stability in batches of electrodes and realizing the simultaneous determination of both substances. The morphology and structure of the assemblies were analyzed and characterized by UV-Vis spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray powder diffraction (XRD). Electrochemical studies showed that the ordered AuNRs/ITO electrodes have excellent signal reproducibility among several individuals due to the homogeneous mass transfer in the ordered arrangement of the AuNRs. Under the optimized conditions, the simultaneous detection results of DA and TPC showed good linearity in the ranges 1.75-45 μM and 1.5-40 μM, and the detection limits of DA and TPC were 0.06 μM and 0.17 μM, respectively. The results showed that the prepared ordered AuNR/ITO electrode had high sensitivity, long-term stability, and reproducibility for the simultaneous determination of DA and TPC, and it was expected to be applicable for real sample testing.

Hymenaea courbaril resin-mediated gold nanoparticles as catalysts in organic dyes degradation and sensors in pharmaceutical pollutants

In this study, green synthesis of gold nanoparticles (AuNPs) using aqueous extract from Hymenaea courbaril resin (HCR) is reported. The successful formation, functional group involvement, size, and morphology of the subject H. courbaril resin mediated gold nanoparticles (HCRAuNPs) were confirmed by Ultra Violet-Visible (UV-vis) spectroscopy, Fourier-Transform Infrared spectroscopy (FTIR), and Transmission Electron Microscopy (TEM) techniques. Stable and high yield of HCRAuNPs was formed in 1:15 (aqueous solution: salt solution) reacted in sunlight as indicated by the visual colour change and appearance of surface Plasmon resonance (SPR) at 560 nm. From the FT-IR results, the phenolic hydroxyl (-OH) functional group was found to be involved in synthesis and stabilization of nanoparticles. The TEM analysis showed that the particles are highly dispersed and spherical in shape with average size of 17.5 nm. The synthesized HCRAuNPs showed significant degradation potential against organic dyes, including methylene blue (MB, 85 %), methyl orange (MO, 90 %), congo red (CR, 83 %), and para nitrophenol (PNP, 76 %) up to 180 min. The nanoparticles also demonstrated the effective detection of pharmaceutical pollutants, including amoxicillin, levofloxacin, and azithromycin in aqueous environment as observable changes in color and UV-Vis spectral graph.

Nanogold-coated stent facilitated non-invasive photothermal ablation of stent thrombosis and restoration of blood flow

In-stent restenosis (ISR) and stent thrombosis (ST) are the most serious complications of coronary angioplasty and stenting. Although the evolution of drug-eluting stents (DES) has significantly restricted the incidence of ISR, they are associated with an enhanced risk of ST. In the present study, we explore the photothermal ablation of a thrombus using a nano-enhanced thermogenic stent (NETS) as a modality for revascularization following ST. The photothermal activity of NETS, fabricated by coating bare metal stents with gold nanorods generating a thin plasmonic film of gold, was found to be effective in rarefying clots formed within the stent lumen in various in vitro assays including those under conditions mimicking blood flow. NETS implanted in the rat common carotid artery generated heat following exposure to a NIR-laser that led to effective restoration of blood flow within the occluded vessel in a model of ferric chloride-induced thrombosis. Our results present a proof-of-concept for a novel photothermal ablation approach by employing coated stents in the non-invasive management of ST.

Triphenylphosphonium-Functionalized Gold Nanorod/Zinc Oxide Core-Shell Nanocomposites for Mitochondrial-Targeted Phototherapy

Phototherapies, such as photothermal therapy (PTT) and photodynamic therapy (PDT), combined with novel all-in-one light-responsive nanocomposites have recently emerged as new therapeutic modalities for the treatment of cancer. Herein, we developed novel all-in-one triphenylphosphonium-functionalized gold nanorod/zinc oxide core-shell nanocomposites (CTPP-GNR@ZnO) for mitochondrial-targeted PTT/PDT owing to their good biocompatibility, tunable and high optical absorption, photothermal conversion efficiency, highest reactive oxygen species (ROS) generation, and high mitochondrial-targeting capability. Under laser irradiation of 780 nm, the CTPP-GNR@ZnO core-shell nanocomposites effectively produced heat in addition to generating ROS to induce cell death, implying a synergistic effect of mild PTT and PDT in combating cancer. Notably, the in vitro PTT/PDT effect of CTPP-GNR@ZnO core-shell nanocomposites exhibited effective cell ablation (95%) and induced significant intracellular ROS after the 780 nm laser irradiation for 50 min, indicating that CTPP in CTPP-GNR@ZnO core-shell nanocomposites can specifically target the mitochondria of CT-26 cells, as well as generate heat and ROS to completely kill cancer cells. Overall, this light-responsive nanocomposite-based phototherapy provides a new approach for cancer synergistic therapy.

Novel Gold Nanorods@Thiolated Pectin on the Killing of HeLa Cells by Photothermal Ablation

Gold nanorods (AuNRs) have attracted attention in the field of biomedicine, particularly for their potential as photothermal agents capable of killing tumor cells by photothermic ablation. In this study, the synthesis of novel AuNRs stabilized with thiolated pectin (AuNR@SH-PEC) is reported. To achieve this, thiolated pectin (SH-PEC) was obtained by chemically binding cysteamine motifs to the pectin backbone. The success of the reaction was ascertained using FTIR-ATR. Subsequently, the SH-PEC was used to coat and stabilize the surface of AuNRs (AuNR@SH-PEC). In this context, different concentrations of SH-PEC (0.25, 0.50, 1.0, 2.0, 4.0, and 8.0 mg/mL) were added to 0.50 mL of AuNRs suspended in CTAB, aiming to determine the experimental conditions under which AuNR@SH-PEC maintains stability. The results show that SH-PEC effectively replaced the CTAB adsorbed on the surface of AuNRs, enhancing the stability of AuNRs without affecting their optical properties. Additionally, scanning electron and atomic force microscopy confirmed that SH-PEC is adsorbed into the surface of the AuNRs. Importantly, the dimension size (60 × 15 nm) and the aspect ratio (4:1) remained consistent with those of AuNRs stabilized with CTAB. Then, the photothermal properties of gold nanorods were evaluated by irradiating the aqueous suspension of AuNR@SH-PEC with a CW laser (808 nm, 1 W). These results showed that photothermal conversion efficiency is similar to the photothermal conversion observed for AuNR-CTAB. Lastly, the cell viability assays confirmed that the SH-PEC coating enhanced the biocompatibility of AuNR@SH-PEC. Most important, the viability cell assays subjected to laser irradiation in the presence of AuNR@SH-PEC showed a decrease in the cell viability relative to the non-irradiated cells. These results suggest that AuNRs stabilized with thiolated pectin can potentially be exploited in the implementation of photothermal therapy.

Purification and characterization of a chicory polysaccharide and its application in stabilizing genistein for cancer therapy

Genistein is an isoflavone with chemopreventive and therapeutic effects on various types of cancers. Apparently, in contrast to the advantages of multi-target therapy, the poor water solubility of this molecule is a major obstacle to its clinical application. In this work, zein/chicory polysaccharide nanoparticles (G-zein-P NPs) were prepared by pH-induced antisolvent precipitation method for the encapsulation of genistein. Firstly, an acidic polysaccharide (CIP70-2) with a molecular weight of 66.7 kDa was identified from the roots of chicory (Cichorium intybus). This natural macromolecule was identified as a plant pectin, for which the structure included RG-I (rhamnogalacturonan I) and HG (homogalacturonan) regions. Using this polysaccharide, G-zein-P NPs were prepared, in which the water solubility of genistein was improved by encapsulation. The encapsulation efficiency and loading efficiency of genistein by composite nanoparticles reached 99.0 % and 6.96 %, respectively. In vitro tumor inhibition experiments showed that the inhibitory effect of G-zein-P NPs on HepG2 cells was twice that of unencapsulated genistein. Moreover, the significant inhibition of tumor development and metastasis by G-zein-P NPs was observed in zebrafish xenograft models. The results suggested that zein/chicory polysaccharide nanoparticles may be a promising delivery carrier for genistein application in cancer prevention and therapy.

Interactions between Nanoclay, CTAB and Linear/Star Shaped Polymers

The influence of star-shaped (PAA-SS) and linear polyacrylic acid (PAA) with different molecular weights (high—PAA-HMW and low—PAA-LMW) on the structure of the adsorption layer, adsorption amount, electrokinetic and stabilizing properties of the PAA/CTAB/nanoclay suspensions was studied. The properties of the systems containing one of these polymers, the cationic surfactant—hexadecyltrimethylammonium bromide (CTAB) and the surface-modified nanoclay (N-SM) were analyzed using the following techniques: BET, CHN, FT-IR, ED-XRF, XRD, HRTEM, UV-Vis, tensiometry and zeta potential measurements. It was proved that PAA could be used as an effective stabilizer of N-SM. Moreover, the addition of CTAB caused a significant increase in the stability of the systems but decreased the adsorption of PAA on the N-SM surface and changed the structure of the adsorption layers. The largest stability was observed in the PAA-HMW/CTAB system. The PAA polymers and PAA/CTAB complexes adsorbed, especially on the clay surface, influenced the primary distribution of the layered sheets but kept the same basal d-spacing. The adsorption of PAA and the PAA/CTAB complexes took place mainly at the plate edges and on the contact space between the sheets. The obtained results will be used for the preparation of the PAA/CTAB/nanoclay composite for water purification.

Ultrasensitive Near-Infrared Circularly Polarized Light Detection Using 3D Perovskite Embedded with Chiral Plasmonic Nanoparticles

Chiral organic ligand-incorporated low-dimensional metal-halide perovskites have received increasing attention for next-generation photodetectors because of the direct detection capability of circularly polarized light (CPL), which overcomes the requirement for subsidiary optical components in conventional CPL photodetectors. However, most chiral perovskites have been based on low-dimensional structures that confine chiroptical responses to the ultraviolet (UV) or short-wavelength visible region and limit photocurrent due to their wide bandgap and poor charge transport. Here, chiroptical properties of 3D Cs_0.05 FA_0.5 MA_0.45 Pb_0.5 Sn_0.5 I₃ polycrystalline films are achieved by incorporating chiral plasmonic gold nanoparticles (AuNPs) into the mixed PbSn perovskite, without sacrificing its original optoelectronic properties. CPL detectors fabricated using chiral AuNP-embedded perovskite films can operate without external power input; they exhibit remarkable chirality in the near-infrared (NIR) region with a high anisotropy factor of responsivity (g_res ) of 0.55, via giant plasmon resonance shift of chiral plasmonic AuNPs. In addition, a CPL detector array fabricated on a plastic substrate demonstrates highly sensitive self-powered NIR detection with superior flexibility and durability.

SPR detection of protein enhanced by seedless synthesized gold nanorods

Surface plasmon resonance (SPR) is a label-free, real-time bio-sensing technique with high potential in the diagnostic area, especially when a signal amplification strategy is used to improve the detection limit. We report here a simple method for enhancing the detection limit of bovine serum albumin (BSA), by attaching gold nanorods (AuNRs). AuNRs were obtained by a seedless synthesis technique and characterized using scanning electron microscopy (SEM), UV-VIS spectroscopy, FT-IR spectroscopy and dynamic light scattering (DLS). Finite element method (FEM) simulations were employed to explore the enhancement of the SPR signal by adding AuNRs on the SPR sensor's metallic layer. SPR spectroscopy was used to analyze the changes in the refractive index brought by the immobilization of unconjugated BSA and BSA modified with AuNRs. The results confirmed that the AuNRs conjugated with the protein increase the SPR signal ~ 10 times, leading to a limit of detection of 1.081 × 10^-8 M (0.713 μg/mL).

Comparative study of an antimicrobial peptide and a neuropeptide conjugated with gold nanorods for the targeted photothermal killing of bacteria

There are certain disadvantages in treating bacterial infections through conventional methods. For this reason, the current study does focus on combating bacterial wound infections by photothermal therapy assisted by gold nanorod-peptide conjugates (GNR-peptide conjugates). Two peptides, the cationic antimicrobial peptide LL-37 and neuropeptide ANGIOPEP-2 both with specificity for targeted bacterial binding, were conjugated with GNR surface through electrostatic interactions. The GNR-peptide conjugates showed good biocompatibility, sufficient stability, enhanced targeting, potential photothermal killing of bacteria, and possible acceleration of wound healing. The photo-biomodulation properties of NIR improved the wound closure rates through enhanced cell migration. The multifunctional LL37-conjugated GNRs significantly enhanced photothermal therapeutic outcomes based on bacterial targeting with promising wound healing properties.

Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer

The most prevalent malignancy among postmenopausal women is breast cancer. It is one of the leading causes of cancer-related mortality among women. Letrozole (LTZ) is a clinically approved inhibitor for breast cancer in postmenopausal women. However, due to poor aqueous solubility, non-specific binding, unwanted toxicity, and poor blood circulation hampered its clinical applications. To maximize the pharmacological effects and minimize the side effects, inorganic nanoparticles are a good alternative. Due to excellent biocompatibility and minimum cytotoxicity, gold nanoparticles (AuNPs) offer distinct benefits over other metal nanoparticles. Emerging as attractive components, AuNPs and Gum acacia (GA) have been extensively studied as biologically safe nanomaterials for the treatment of cancers. This study reports the synthesis and characterization of GA stabilized gold nanoparticles (GA-AuNPs) of LTZ for breast cancer treatment. The observed particle size of optimized LTZ @ GA-AuNPs was 81.81 ± 4.24 nm in size, 0.286 ± 0.143 of polydispersity index (PDI) and -14.6 ± -0.73 mV zeta potential. The biologically synthesized LTZ @ GA-AuNPs also demonstrated dose-dependent cytotoxicity against the human breast cancer cell line MCF-7, with an inhibitory concentration (IC50) of 3.217 ± 0.247. We determined the hemolytic properties of the LTZ @ GA-AuNPs to evaluate the interaction between the nanoparticles and blood components. Results showed that there is no interaction between LTZ @ GA-AuNPs and blood. In conclusion, the findings indicate that LTZ @ GA-AuNPs has significant potential as a promising drug delivery carrier for treating breast cancer in postmenopausal women.

Biocompatible gum arabic-gold nanorod composite as an effective therapy for mistreated melanomas

Advanced melanoma patients that are not included in common genetic classificatory groups lack effective and safe therapeutic options. Chemotherapy and immunotherapy show unsatisfactory results and devastating adverse effects for these called triple wild-type patients. New approaches exploring the intrinsic antitumor properties of gold nanoparticles might reverse this scenario as a safer and more effective alternative. Therefore, we investigated the efficacy and safety of a composite made of gum arabic-functionalized gold nanorods (GA-AuNRs) against triple wild-type melanoma. The natural polymer gum arabic successfully stabilized the nanorods in the biological environment and was essential to improve their biocompatibility. In vivo results obtained from treating triple wild-type melanoma-bearing mice showed that GA-AuNRs remarkably reduced primary tumor growth by 45%. Furthermore, GA-AuNRs induced tumor histological features associated with better prognosis while also reducing superficial lung metastasis depth and the incidence of intrapulmonary metastasis. GA-AuNRs' efficacy comes from their capacity to reduce melanoma cells ability to invade the extracellular matrix and grow into colonies, in addition to a likely immunomodulatory effect induced by gum arabic. Additionally, a broad safety investigation found no evidence of adverse effects after GA-AuNRs treatment. Therefore, this study unprecedentedly reports GA-AuNRs as a potential nanomedicine for advanced triple wild-type melanomas.

Synthesis of Mesoporous Silica Coated Gold Nanorods Loaded with Methylene Blue and Its Potentials in Antibacterial Applications

In this work, the successful preparation and characterization of gold nanorods (AuNRs) coated with a mesoporous silica shell (AuNRs@Simes) was achieved. Conjugation with methylene blue (MB) as a model drug using ultrasound-stimulated loading has been explored for further application in light-mediated antibacterial studies. Lyophilization of this conjugated nanosystem was analyzed using trehalose (TRH) as a cryogenic protector. The obtained stable dry formulation shows potent antimicrobial activity against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria after a simple post-treatment irradiation method with a red laser during a short time period.

Cetyltrimethylammonium Bromide (CTAB)-Loaded SiO2-Ag Mesoporous Nanocomposite as an Efficient Antibacterial Agent

To date, Ag-based nanomaterials have demonstrated a high potential to overcome antibiotic resistance issues. However, bare Ag nanomaterials are prone to agglomeration in the biological environment, which results in a loss of antibacterial activity over time. Furthermore, it is still challenging to collect small-sized Ag nanomaterials right after the synthesis process. In this study, spherical-shaped Ag nanoparticles (NPs) (~6–10 nm) were attached on the surface of cetyltrimethylammonium bromide (CTAB)-loaded mesoporous silica nanoparticles (MSNs) (~100–110 nm). Antibacterial activity tests suggested that the obtained nanocomposite can be used as a highly efficient antibacterial agent against both Gram-negative and Gram-positive bacterial strains. The minimum inhibitory concentration (MIC) recalculated to pure Ag weight in nanocomposite was found to be ~1.84 µg/mL (for Escherichia coli) and ~0.92 µg/mL (for Staphylococcus aureus)—significantly smaller compared to values reported to date. The improved antibacterial activity of the prepared nanocomposite can be attributed to the even distribution of non-aggregated Ag NPs per volume unit and the presence of CTAB in the nanocomposite pores.

Biodegradable Poly(butylene adipate-co-terephthalate) Antibacterial Nanocomposites Reinforced with MgO Nanoparticles

Antibacterial packaging materials can reduce the microbial contamination of food surfaces. In this study, magnesium oxide (MgO) nanoparticles were synthesized and then coated with cetrimonium bromide (CTAB). CTAB-modified MgO (MgO@CTAB) was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis. Then, different loadings of MgO@CTAB were mixed with poly(butylene adipate-co-terephthalate) (PBAT) by melt compounding. The results showed that the addition of MgO@CTAB deteriorated the thermal stability of PBAT due to MgO serving as a catalyst to promote the thermal degradation of PBAT. In addition, MgO@CTAB could serve as a nucleating agent to improve the crystallinity of PBAT. With the optimal 3 wt% of MgO@CTAB, the tensile strength of PBAT/MgO@CTAB increased from 26.66 to 29.90 MPa, with a slight enhancement in elongation at break. SEM observations and dynamical rheological measurements revealed that aggregation occurred when the content of MgO@CTAB exceeded 5 wt%. The presence of MgO@CTAB endowed PBAT with antibacterial properties. The bacterial inhibition zone increased with the increasing content of MgO@CTAB. In addition, MgO@CTAB had a better antibacterial efficiency against Gram-positive bacterial S. aureus than Gram-negative bacterial E. coli.

Antimicrobial gum bio-based nanocomposites and their industrial and biomedical applications

Gum polysaccharides are derived from renewable sources. They are readily available, inexpensive, non-hazardous and eco-friendly. Depending upon the source, gums may be categorized as microbial gums, plant exudate gums or seed gums. Naturally occurring gum carbohydrates find multiple applications in the biomedical arena, compared with synthetic compounds, because of their unique structures and functionalities. Gums and their biocomposites are preferred for sustained drug delivery because they are safe and edible as well as more susceptible to biodegradation. The present review provides a state-of-the-art conspectus on the industrial and biomedical applications of antimicrobial gum-based biocomposites. Different kinds of gums polysaccharides will first be addressed based on their sources. Metal-, carbon- and organic-based nanostructures that are used in gum nanocomposites will then be reviewed with respect to their industrial and biomedical applications, to provide a backdrop for future research.

Coating Mechanism of AuNPs onto Sepiolite by Experimental Research and MD Simulation

The amenability of gold nanoparticles (AuNPs) coating on natural and modified (hexadecyl trimethyl ammonium bromide, CTAB) sepiolite surfaces was studied both experimentally and theoretically. The zeta potential experiments and Fourier transform infrared spectrophotometer (FTIR), environmental scanning electron microscope (ESEM), and transmission electron microscopy (TEM) analyses were carried out with the sepiolite samples in the presence of AuNPs. In addition, the adsorption of three gold-nanoparticles on the sepiolite surface (100) in the absence and presence of CTAB was investigated by molecular dynamics (MD) simulations. The AuNPs showed no significant change in the zeta potential of natural sepiolite surfaces due to negative charges of both the sepiolite and AuNPs at natural pH. The surface charge of modified sepiolite decreased with the increase in AuNPs concentration indicating the significance AuNPs adsorption. FTIR, ESEM, and TEM analyses indicated the coating of AuNPs onto the modified sepiolite surface were higher than that of the natural sepiolite surface. The MD simulation results showed that AuNPs can easily adsorb onto the basal surface of the sepiolite due to its hydrophilicity in the presence and absence of CTAB as indicated in the experimental studies. In short, the modification of sepiolite with CTAB made the charge positive, and in turn considerably increased the AuNPs coating on sepiolite surfaces due to electrostatic attraction.

Gold nanoworms: Optical properties and simultaneous SERS and fluorescence enhancement

Fabrication of platforms for efficient Raman and fluorescence enhancement is very attractive for plasmon-based molecular sensing. For superior sensitivity, the plasmonic constituents of such platforms should be effective electromagnetic field enhancers. Furthermore, nanoparticles having plasmon peak in the spectral range of therapeutic window are superior for biomedical application. Herein, we show that worm-shaped Au nanoparticles can be used for simultaneous surface enhanced Raman scattering (SERS) and metal enhanced fluorescence (MEF). Gold nanoworms (Au-NWs) with an intense plasmon absorption in the therapeutic window were synthesized using a facile single-stepped recipe. Electron microscopy imaging revealed that Au-NWs have a non-uniform surface. Owing to their special morphology, three distinct plasmon bands were seen in the experimental spectrum. The presence of three plasmon peaks was also verified by finite element based simulations. The simulation results further show that Au-NWs can provide intense near field enhancement for multiple excitation wavelengths. As a proof of concept, we have used Au-NWs based platforms for simultaneous enhancement of fluorescence and Raman signal of rhodamine 6G (R6G) dye molecule.

Au-Pd bimetallic nanoparticles embedded highly porous Fenugreek polysaccharide based micro networks for catalytic applications

Currently, metallic nanoparticles possessing versatile heterogeneous catalytic functionality such as in hydrogenation, water splitting, hydrogen production and CO₂ reduction for global pollution remediation have been paid great attentions due to their high chemical stability, superior activity and unique electrical and optical properties. However, the gradual degradation of their catalytic activity on multiple usage limits the monometallic nanoparticles to industrial applications. Herein, we fabricated the highly porous fenugreek polysaccharide assisted green synthesis of AuPd nanostructures for heterogeneous catalytic hydrogenation of the industrial usable highly toxic 4-nitrophenol to the medicinally useful 4-aminophenol. The aqueous method developed in the present work is environmentally friendly, simple and low-cost procedure. The fabricated bimetallic porous AuPd nanostructures characterized using SEM, TEM, UV-Vis, XRD, XPS and FTIR analysis. The catalytic activity of the synthesized nanostructures was studied for the heterogeneous hydrogenation of 4-nitrophenol to 4-aminophenol in presence of NaBH₄, and the catalytic kinetic for the hydrogenation was analyzed via an UV-Vis spectrometer.

Stable and Biocompatible Mushroom β-Glucan Modified Gold Nanorods for Cancer Photothermal Therapy

Naturally occurring β-glucans have been widely regarded as a natural source for functional foods and pharmaceuticals due to their immunomodulatory property and antitumor activity. However, physicochemically stable and biocompatible β-glucans are rarely explored as a carrier for nanomaterials to overcome the problems of aggregation and nanotoxicity. Here, we developed highly stable and biocompatible mushroom β-glucan coated gold nanorods (AuNR-Glu) for cancer photothermal therapy by integrating Pleurotus tuber-regium sclerotial β-glucan (Glu) and plasmonic gold nanorods (AuNRs) possessing photothermal property in the second near-infrared (NIR-II) window. AuNR-Glu showed high colloidal stability in various biological media, even in simulated gastric fluid. Moreover, AuNR-Glu had low cytotoxicity and high photothermal stability, which are excellent characteristics for photothermal agents for cancer therapy. In vitro experiments showed that AuNR-Glu nanohybrid was effective against MCF-7 (only 4.5 ± 0.9% viability) at a low dose of 20 μg/mL under NIR-II at a safe laser power density (0.75 W/cm²). Natural mushroom β-glucans are potential functional polymers that can be used to fabricate nanohybrids for biomedical applications.