Preparation and characterization of biodegradable nanocomposites derived from carboxymethyl cellulose and hydroxyapatite

Preparation of an injectable and photocurable carboxymethyl cellulose/hydroxyapatite composite and its application in cranial regeneration

Limited bone regeneration, uncontrollable degradation rate, mismatched defect zone and poor operability have plagued the reconstruction of irregular bone defect by tissue-engineered materials. A combination of biomimetic scaffolds with hydroxyapatite has gained great popularity in promoting bone regeneration. Therefore, we designed an injectable, photocurable and in-situ curing hydrogel by methacrylic anhydride -modified carboxymethyl cellulose (CMC-MA) loading with spherical hydroxyapatite (HA) to highly simulate the natural bony matrix and match any shape of damaged tissue. The prepared carboxymethyl cellulose-methacrylate/ hydroxyapatite(CMC-MA/HA) composite presented good rheological behavior, swelling ratio and mechanical property under light illumination. Meanwhile, this composite hydrogel promoted effectively proliferation, supported adhesion and upregulated the osteogenic-related genes expression of MC3T3-E1 cells in vitro, as well as the activity of the osteogenic critical protein, Integrin α1, β1, Myosin 9, Myosin 10, BMP-2 and Smad 1 in Integrin/BMP-2 signal pathway. Together, the composite hydrogels realized promotion of bone regeneration, deformity improvement, and the enhanced new bone strength in skull defect. It also displayed a good histocompatibility and stability of subcutaneous implantation in vivo. Overall, this study laid the groundwork for future research into developing a novel biomaterial and a minimally invasive therapeutic strategies for reconstructing bone defects and contour deficiencies.

Developing a Prolamin-Based Gel for Food Packaging: In-Vitro Assessment of Cytocompatibility

Growing environmental concerns drive efforts to reduce packaging waste by adopting biodegradable polymers, coatings, and films. However, biodegradable materials used in packaging face challenges related to barrier properties, mechanical strength, and processing compatibility. A composite gel was developed using biodegradable compounds (prolamin, d-mannose, citric acid), as a coating to increase the oxygen barrier of food packaging materials. To improve gel stability and mechanical properties, the gels were physically cross-linked with particles synthesized from tetraethyl orthosilicate and tetramethyl orthosilicate precursors. Additionally, biocompatibility assessments were performed on human keratinocytes and fibroblasts, demonstrating the safety of the gels for consumer contact. The gel properties were characterized, including molecular structure, morphology, and topography. Biocompatibility of the gels was assessed using bioluminescent ATP assay to detect cell viability, lactate dehydrogenase assay to determine cell cytotoxicity, and a leukocyte stimulation test to detect inflammatory potential. A composite gel with strong oxygen barrier properties in low-humidity environments was prepared. Increasing the silane precursor to 50 wt% during gel preparation slowed degradation in water. The addition of citric acid decreased gel solubility. However, higher precursor amounts increased surface roughness, making the gel more brittle yet mechanically resistant. The increase of precursor in the gel also increased gel viscosity. Importantly, the gels showed no cytotoxicity on human keratinocytes or fibroblasts and had no inflammatory effects on leukocytes. This composite gel holds promise for oxygen barrier food packaging and is safe for consumer contact. Further research should focus on optimizing the stability of the oxygen barrier in humid environments and investigate the potential sensitizing effects of biodegradable materials on consumers.

Emerging Polymer-Based Nanosystem Strategies in the Delivery of Antifungal Drugs

Nanosystems-based antifungal agents have emerged as an effective strategy to address issues related to drug resistance, drug release, and toxicity. Among the diverse materials employed for antifungal drug delivery, polymers, including polysaccharides, proteins, and polyesters, have gained significant attention due to their versatility. Considering the complex nature of fungal infections and their varying sites, it is crucial for researchers to carefully select appropriate polymers based on specific scenarios when designing antifungal agent delivery nanosystems. This review provides an overview of the various types of nanoparticles used in antifungal drug delivery systems, with a particular emphasis on the types of polymers used. The review focuses on the application of drug delivery systems and the release behavior of these systems. Furthermore, the review summarizes the critical physical properties and relevant information utilized in antifungal polymer nanomedicine delivery systems and briefly discusses the application prospects of these systems.

Tuning the electrostatic interaction between rice protein and carboxymethyl cellulose toward hydrophilic composites with enhanced functional properties

Protein-polysaccharide interactions have attracted much attention due to inherent potential in generating new structures and functionalities. In the present study, by simply mixing rice proteins (RPs) with carboxymethyl cellulose (CMC) at pH 12.0 prior neutralization, novel protein-polysaccharide complexes (RCs) were structured with water dispersibility and functionalities highly dependent on the degree of substitution (DS) and molecular weight (Mw) of CMC. Specifically, the water-dispersibility of RPs was increased from 1.7 % to 93.5 % at a RPs/CMC mass ratio of 10:1 with CMC of DS1.2 (Mw = 250 kDa). Fluorescence and circular dichroism spectra showed suppressed folding tendency of RPs by CMC during neutralizing the basicity, indicating controllable protein conformations. Furthermore, the structures of RCs became more unfolded for CMC with a larger DS or a smaller Mw. This enabled RCs with highly controllable functionalities in terms of emulsifying and foaming properties, which may have promising applications in developing food matrix with customized structures and textures.

Synthesis, characterization, and biodegradation studies of new cellulose-based polymers

New cellulose carbamates and cellulose acetate carbamates were prepared by classical addition reaction of isocyanates with alcohols. A Telomerization technique was used to make the grafted molecules strongly anchored and more hydrophobic. These molecules were grafted into cellulose and CA chains, respectively. The structures of the synthesized derivatives were confirmed using Nuclear Magnetic Resonance Spectroscopy, Fourier Transform Infrared and Thermogravimetric Analysis, and their solubility phenomenon was also established, and the carbamate derivatives showed better solubility compared to cellulose. Their ability to biodegrade was investigated, and it was concluded that Cell-P₁ and CA-P₁ derivatives are more biodegradable than the other samples. These results suggest that the resulting compounds can be used effectively in many useful industrial fields, for instance, eco-friendly food packaging, domains that use materials that are environmentally friendly and sustainable and the development of green chemistry.

Chitosan-Hydroxyapatite Bio-Based Composite in Film Form: Synthesis and Application in Wastewater

Water purification from toxic metals was the main objective of this work. A composite in film form was prepared from the biomaterials hydroxyapatite, chitosan and glycerol using the dissolution/recrystallization method. A nanoparticle-based film with a homogenous and smooth surface was produced. The results of total reflectance infrared spectroscopy (ATR-FTIR) and thermal gravimetric analysis (TGA/DTA) demonstrated the presence of a substantial physical force between composite components. The composite was tested for its ability to absorb Cd2+ and Zn2+ ions from aqueous solutions. Cd2+ and Zn2+ adsorption mechanisms are fit using the Langmuir model and the pseudo-second-order model. Thermodynamic parameters indicated that Cd2+ and Zn2+ ion adsorption onto the composite surface is spontaneous and preferred at neutral pH and temperatures somewhat higher than room temperature. The adsorption studies showed that the maximum adsorption capacity of the HAp/CTs bio-composite membrane for Cd2+ and Zn2+ ions was in the order of cadmium (120 mg/g) > Zinc (90 mg/g) at an equilibrium time of 20 min and a temperature of 25 °C. The results obtained on the physico-chemical properties of nanocomposite membranes and their sorption capacities offer promising potential for industrial and biological activities.

Zinc substituted hydroxyapatite/silk fiber/methylcellulose nanocomposite for bone tissue engineering applications

Fibrous bio-composite based on silk fiber (SF), methylcellulose (MC) and zinc substituted hydroxyapatite (Zn_xCa_5-x (PO₄)₃(OH) (x = 0.1, 0.2, 0.5 and 1.0)) were obtained with the use of electrospinning (E-Spin) method. XRD, FTIR, SEM-EDAX, swelling, porosity and mechanical properties of the composites were analyzed. The elongation at break (%) (20.97-317.20 %) and tensile strength (29.85-110.92 MPa) of nanocomposites was increased with an increase in the wt% of Zn-HAP in SF/MC. An increase in the zone of inhibition with an increase in the wt% of Zn-HAP into the SF/MC was observed against E. coli (34 ± 0.33 to 47 ± 1.15), S. aureus (28 ± 0.24 to 38 ± 1.32) and C. albicans (24 ± 0.36 to 39 ± 2.36). The in-vitro biomineralization study using SBF (simulated body fluid) showed apatite layer formation on the nano-composite. In addition, the optimized (20 wt % of Zn₁.₀Ca_4.0(PO₄)₃(OH)/SF/MC) nano-composite showed good cell viability against human bone osteosarcoma (MG-63) cells.

Environmental-Friendly Adsorbent Composite Based on Hydroxyapatite/Hydroxypropyl Methyl-Cellulose for Removal of Cationic Dyes from an Aqueous Solution

The aim of this study is to develop a new, efficient, and inexpensive natural-based adsorbent with high efficacy for the cationic dye methylene blue (MB). A natural-based nanocomposite based on hydroxyapatite (HAp) and hydroxypropyl methylcellulose (HPMC) was selected for this purpose. It was synthesized by the dissolution/reprecipitation method. A film with a homogeneous and smooth surface composed of nanoparticles was prepared from the nanocomposite. HPMC and HAp biopolymers were selected due to their compatibility, biodegradability, and non-toxicity. Total reflectance infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and calorimetric/thermal gravimetric (DSC/TGA) analysis results revealed the existence of strong physical interaction between the composite components. Scanning electron microscopy (SEM) observations show a composite sheet with a homogenous and smooth surface, indicating excellent compatibility between HPMC and HAp in the composite. The nanocomposite was evaluated as an adsorbent for organic dyes in an aqueous solution. The effects of solution pH, initial MB concentration, composite concentration, and adsorption time on the adsorption efficiency were evaluated. The highest adsorption rate was seen as 52.0 mg of MB/g composite. The adsorption rate reached equilibrium in about 20 min. Fitting of the adsorption data to the Langmuir and Freundlich adsorption models was investigated. Results showed that the adsorption process follows the Langmuir isotherm model. The kinetic study results revealed that the adsorption process was pseudo-second-order. The herein composite is an excellent alternative for use as contemporary industrial-scale adsorbents.

Nanocellulose-Based Materials for Water Treatment: Adsorption, Photocatalytic Degradation, Disinfection, Antifouling, and Nanofiltration

Nanocelluloses are promising bio-nano-materials for use as water treatment materials in environmental protection and remediation. Over the past decades, they have been integrated via novel nanoengineering approaches for water treatment processes. This review aims at giving an overview of nanocellulose requirements concerning emerging nanotechnologies of waster treatments and purification, i.e., adsorption, absorption, flocculation, photocatalytic degradation, disinfection, antifouling, ultrafiltration, nanofiltration, and reverse osmosis. Firstly, the nanocellulose synthesis methods (mechanical, physical, chemical, and biological), unique properties (sizes, geometries, and surface chemistry) were presented and their use for capturing and removal of wastewater pollutants was explained. Secondly, different chemical modification approaches surface functionalization (with functional groups, polymers, and nanoparticles) for enhancing the surface chemistry of the nanocellulose for enabling the effective removal of specific pollutants (suspended particles, microorganisms, hazardous metals ions, organic dyes, drugs, pesticides fertilizers, and oils) were highlighted. Thirdly, new fabrication approaches (solution casting, thermal treatment, electrospinning, 3D printing) that integrated nanocelluloses (spherical nanoparticles, nanowhiskers, nanofibers) to produce water treatment materials (individual composite nanoparticles, hydrogels, aerogels, sponges, membranes, and nanopapers) were covered. Finally, the major challenges and future perspectives concerning the applications of nanocellulose based materials in water treatment and purification were highlighted.

Zeolite/Cellulose Acetate (ZCA) in Blend Fiber for Adsorption of Erythromycin Residue From Pharmaceutical Wastewater: Experimental and Theoretical Study

The expanding amount of remaining drug substances in wastewater adversely affects both the climate and human well-being. In the current investigation, we developed new cellulose acetic acid derivation/zeolite fiber as an effective technique to eliminate erythromycin (ERY) from wastewater. The number of interchangeable sites in the adsorbent structures and the ratio of ERY to the three adsorbents were identified as the main reasons for the reduction in adsorption as the initial ERY concentrations increased. Additionally, for all adsorbents, the pseudo–second-order modeling showed better fitting for the adsorption than the pseudo–first-order modeling. However, the findings obtained in the pseudo–first-order model were still enough for explaining the sorption kinetics of ERY, showing that the surface displayed all chemisorption and physi-sorption adsorption processes by both adsorbents. The R² for the second order was very close to 1 for the three adsorbents in the case of pseudo–second-order. The adsorption capacity reached 17.76 mg/g. The three adsorbents showed negative values of ΔH, and these values were −6,200, −8,500, and −9600 kJ/mol for zeolite, CA, and ZCA, respectively, and this shows that the adsorption is exothermic. The desorption analysis shows no substantial loss of adsorption site after three trials, indicating higher stability and resilience of the three adsorbents, indicating a strong repeatability of their possible use in adsorption without contaminating the environment. In addition, the chemical attitude and possible donor–acceptor interactions of ERY were assessed by the quantum chemical parameters (QCPs) and NBO analysis performed, at the HF/6-311G** calculations.

Enhanced Ibuprofen Adsorption and Desorption on Synthesized Functionalized Magnetic Multiwall Carbon Nanotubes from Aqueous Solution

In recent years, concerns have been raised about the occurrence of active raw materials and pharmaceutical ingredients that may be present in water, including wastewater, in the pharmaceutical industry. Wastewater treatment methods are not enough to completely remove active pharmaceuticals and other waste; thus, this study aims to assess the use of a multiwall carbon nanotube after derivatization and magnetization as a new and renewable absorbent for removing ibuprofen from an aqueous medium. The adsorbents were prepared by first oxidizing a multiwall carbon nanotube and then deriving the oxidized product with hydroxyl amine (m-MWCNT-HA), hydrazine (m-MWCNT-HYD), and amino acid (m-MWCNT-CYS). Adsorbents were characterized by Raman spectroscopy, Fourier Transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM and TEM), Brunauer-Emmett-Teller surface area analysis (BET), thermogravimetric analysis (TGA), and vibrating sample magnetometer (VSM). Batch adsorption studies were conducted to study the effects of pH, temperature, time, and initial concentration of the adsorbate. Adsorption isotherm, kinetics, and thermodynamics studies were also conducted. The results show that the optimal pH for nearly complete removal of Ibu in a short time at room temperature was 4 for three adsorbents. The adsorption followed the Langmuir isotherm model with pseudo-second-order kinetics. The percentage of removal of ibuprofen reached up to 98.4%, 93%, and 61.5% for m-MWCNT-CYS, m-MWCNT-HYD, and m-MWCNT-HA respectively. To the best of our knowledge, the grafted MWCNTs presented in this work comprise the first example in the literature of oxidized MWCNT modified with such functionalities and applied for ibuprofen removal.

Recent Advances in Applications of Cellulose Derivatives-Based Composite Membranes with Hydroxyapatite

The development of novel polymeric composites based on cellulose derivatives and hydroxyapatite represents a fascinating and challenging research topic in membranes science and technology. Cellulose-based materials are a viable alternative to synthetic polymers due to their favorable physico-chemical and biological characteristics. They are also an appropriate organic matrix for the incorporation of hydroxyapatite particles, inter and intramolecular hydrogen bonds, as well as electrostatic interactions being formed between the functional groups on the polymeric chains surface and the inorganic filler. The current review presents an overview on the main application fields of cellulose derivatives/hydroxyapatite composite membranes. Considering the versatility of hydroxyapatite particles, the hybrid materials offer favorable prospects for applications in water purification, tissue engineering, drug delivery, and hemodialysis. The preparation technique and the chemical composition have a big influence on the final membrane properties. The well-established membrane fabrication methods such as phase inversion, electrospinning, or gradual electrostatic assembly are discussed, together with the various strategies employed to obtain a homogenous dispersion of the inorganic particles in the polymeric matrix. Finally, the main conclusions and the future directions regarding the preparation and applications of cellulose derivatives/hydroxyapatite composite membranes are presented.

Nanocomposites membranes from cellulose nanofibers, SiO2 and carboxymethyl cellulose with improved properties

The binary nanocomposites blended by carboxymethyl cellulose (CMC) and SiO₂ nanoparticles were constructed to prepare the films with superior thermal stability and flame retardant properties. The incorporation of cellulose nanofibers(CNFs) and SiO₂ nanoparticles were followed to prepare ternary nanocomposite films exhibiting excellent mechanical properties. The mechanism and chemical reaction of the thermal decomposition for the CMC/SiO₂ composite membrane were proposed, which showed that the mass residuals were Na₂CO₃, SiO₂ and Na₂SiO₃, Na₂CO₃ when the content of the SiO₂ nanoparticles was lowered and higher than 9.6 %, respectively. Compared with the pure CMC, micro combustion calorimeter (MCC) showed that the total heat release (THR) and the peak heat release rate (PHRR) both decreased from 6.4 kJ/g to 5.8 kJ/g, 134 w/g to 27 w/g, respectively. Moreover, mechanical properties of CMC/CNFs/SiO₂ membrane showed that the toughness and rigidity of the nanocomposites increased by 56.0 % and 63.0 % on the basis of CMC, respectively.

Biomimetic hydroxyapatite/silkfibre/methylcellulose composites for bone tissue engineering applications

Hydroxyapatite (HAP)/silk fibre (SF)/methylcellulose (MC) composites were developed by an electrospinning (E-Spin) method.

Facile preparation of a Ca(ii) carboxymethyl cellulose complex with enhanced calcium bioavailability for treatment of osteoporosis

At present, though calcium (Ca) reagents with high calcium contents are widely synthesized, their wide application is limited due to their low absorption rates and poor bioavailability. Here we use a carboxymethyl cellulose (CMC) derivative with high water solubility and biocompatibility as a ligand to bind Ca2+. The resulting CaCMC complex exhibits remarkable solubility and absorbability under both basic and acidic conditions as well as in stomach mimicking and the gastrointestinal tract. Importantly, this Ca reagent shows high in vivo calcium bioavailability. Data from osteoporosis mouse models show that the CaCMC complex is superior to calcium carbonate in the treatment of osteoporosis. Therefore, the resulting CaCMC complex is used as a new, highly effective and desirable Ca supplement for daily life and clinical applications.

Evaluation of physicochemical, mechanical and biological properties of chitosan/carboxymethyl cellulose reinforced with multiphasic calcium phosphate whisker-like fibers for bone tissue engineering

In this study porous scaffolds of chitosan (CS) and carboxymethyl cellulose (CMC) reinforced with whisker-like biphasic and triphasic calcium phosphate fibers were fabricated by freeze drying method. The effect of addition of CMC, fiber type and content on the mechanical, physicochemical and biological properties of the composite scaffolds was evaluated. The fibers were synthesized by homogenous precipitation method and were characterized. Biphasic fibers contained two phases of hydroxyapatite (HA) and monetite, and triphasic fibers consisted of HA, β-tricalcium phosphate and calcium pyrophosphate and were 20-270 μm and 20-145 μm in length, respectively. The composite scaffolds exhibited desirable microstructures with high porosity (61-75%) and interconnected pores in range of 35-200 μm. Addition of CMC to CS led to a significant improvement in the mechanical properties (up to 150%) but did not affect the water uptake ability and biocompatibility. Both fibers improved the in vitro proliferation, attachment and mineralization of MG63 cells on scaffolds as evidenced by MTT assay, DAPI staining, SEM and Alizarin red staining. Triphasic fibers were more effective in reinforcing the scaffolds and resulted in higher cell viability. Composite scaffolds of CS and CMC reinforced with 50 wt% triphasic fibers were superior in terms of mechanical and biological properties and showed compressive strength and modulus of 150 kPa and 3.08 MPa, respectively, which is up to 300% greater than pure CS scaffolds. The findings indicate that the developed composite scaffolds are potential candidates for bone tissue engineering although they need further enhancement in mechanical properties.

One pot synthesis of carbon dots decorated carboxymethyl cellulose- hydroxyapatite nanocomposite for drug delivery, tissue engineering and Fe3+ ion sensing

In this work, carbon dots conjugated carboxymethyl cellulose-hydroxyapatite nanocomposite has been synthesized by one-pot synthesis method and used for multiple applications like metal ion sensing, osteogenic activity, bio-imaging and drug carrier. The structure and morphology of the nanocomposite were systematically characterized by FTIR, XRD, TGA, FESEM, TEM and DLS. Results clearly demonstrated the formation of fluorescent enabled carbon dots conjugated nanocomposite from carboxymethyl cellulose-hydroxyapatite nanocomposite by a simple thermal treatment. The synthesized nanocomposite is smaller than 100 nm and exhibits fluorescence emission band around 440 nm upon excitation with 340 nm wavelength. In the meantime, the nanocomposite was loaded with a chemotherapeutic drug, doxorubicin to evaluate the drug loading potential of synthesized nanocomposite. Moreover, the as-synthesized nanocomposite showed good osteogenic properties for bone tissue engineering and also exhibited excellent selectivity and sensitivity towards Fe³⁺ ions.