Non-destructive and direct determination of the degree of substitution of carboxymethyl cellulose by HR-MAS 13C NMR spectroscopy

Ultrasonic-assisted synthesis for the production of green and sustainable hemp carboxymethyl cellulose

Hemp fiber (Cannabis sativa) is being widely used to produce carboxymethyl cellulose (CMC). This study focused on synthesizing carboxymethyl cellulose from bleached hemp fiber to investigate the impact of different factors, i.e., chemical concentration and synthesis time, on its characteristics. The fiber morphology analysis revealed desirable properties, which are essential for high-quality CMC production. Optimal condition for CMC synthesis were investigated, which involved using 20 % NaOH (w/v), the shortest total synthesis time (2.30h), and using 0.9 g MCA (w/w). This resulted in a non-significantly high DS (0.80) in both nonspray-dried and spray-dried hemp carboxymethyl cellulose, representing a high CMC content around 96 %. Moreover, the use of ultrasonic assistance and spray drying techniques significantly improved the hemp carboxymethyl cellulose properties, indicating a decreased molecular weight (2.65 × 104 g/mol) and a decreased particle size (7.82 μm). Thermal analysis revealed that spray-dried hemp carboxymethyl cellulose had lower thermal stability than hemp fiber and nonspray-dried hemp carboxymethyl cellulose. FTIR and 13C NMR analyses confirmed the successful CMC synthesis. Additionally, XRD and SEM analyses demonstrated changes in the crystalline structure and hemp carboxymethyl cellulose surface morphology. This revealed advanced techniques that could enhance hemp carboxymethyl cellulose quality and properties, making it suitable for various industrial applications.

Direct synthesis of a lithium carboxymethyl cellulose binder using wood dissolving pulp for high-performance LiFePO4 cathodes in lithium-ion batteries

Lithium carboxymethyl cellulose (CMC-Li) is a promising novel water-based binder for lithium-ion batteries. The direct synthesis of CMC-Li was innovatively developed using abundant wood dissolving pulp materials from hardwood (HW) and softwood (SW). The resulting CMC-Li-HW and CMC-Li-SW binders possessed a suitable degree of substitutions and excellent molecular weight distributions with an appropriate quantity of long- and short-chain celluloses, which facilitated the construction of a reinforced concrete-like bonding system. When used as cathode binders in LiFePO4 batteries, they uniformly coated and dispersed the electrode materials, formed a compact and stable conductive network with high mechanical strength and showed sufficient lithium replenishment. The prepared LiFePO4 batteries exhibited good mechanical stability, low charge transfer impedance, high initial discharge capacity (∼180 mAh/g), high initial Coulombic efficiency (99 %), excellent cycling performance (<3% loss over 200 cycles) and good rate capability, thereby outperforming CMC-Na and the widely used cathode binder polyvinylidene fluoride.

Effect of Lithium Substitution Ratio of Polymeric Binders on Interfacial Conduction within All-Solid-State Battery Anodes

Problematic issues with electrically inert binders have been less serious in the conventional lithium-ion batteries by virtue of permeable liquid electrolytes (LEs) for ionic connection and/or carbonaceous additives for electronic connection in the electrodes. Contrary to electron-conductive binders used to maximize an active loading level, the development of ion-conductive binders has been lacking owing to the LE-filled electrode configuration. Herein, we represent a tactical strategy for improving the interfacial Li⁺ conduction in all-solid-state electrolyte-free graphite (EFG) electrodes where the solid electrolytes are entirely excluded, using lithium-substitution-modulated (LSM) binders. Finely tuning a lithium substitution ratio, a conductive LSM-carboxymethyl cellulose (CMC) binder is prepared from a controlled direct Na⁺/Li⁺ exchange reaction without a hazardous acid involvement. The EFG electrode employing LSM with a maximum degree of substitution of lithium (DS_Li) of ∼68% in our study shows a considerably higher rate capability of 1.05 mA h cm^-2 at 1 C and a capacity retention of ∼61.9% after 200 cycles at 0.5 C than those using sodium-CMC (Na-CMC) (0.78 mA h cm^-2, ∼49.5%) and LSM with ∼35% lithium substitution (0.93 mA h cm^-2, ∼55.4%). More importantly, the correlation between the phase transition near the bottom region of the EFG electrode and the state of charge (SOC) is systematically investigated, clarifying that the improvement of the interfacial conduction is proportional to the DS_Li of the CMC binders. Theoretical calculations combined with experimental results further verify that creating the continuous interface through abundant pathways for mobile ions using the Li⁺-conductive binder is the enhancement mechanism of the interfacial conduction in the EFG electrode, mitigating serious charge transfer resistance.

An Integrated Approach to Optimizing Cellulose Mercerization

An integrated approach, based on quantitative transmission mode powder X-ray diffraction (PXRD) combined with multivariate statistical analysis, has been applied to cellulose obtained from three different sources to correlate the mercerization degree and crystallinity with the cellulose type, temperature, and reaction time. The effects of the experimental conditions on the two outcomes were studied by design of experiments (DoE) and surface responding analysis (SRA) combined with principal component analysis (PCA). SRA showed a marked influence of the type of cellulose (wood cellulose from the kraft vs. sulfite process, WCK vs. WCS) on the conversion of cellulose I to cellulose II (CII%) during mercerization. A counterintuitive simultaneous effect of temperature and cellulose type was also highlighted. The data elaboration in the form of response surface plots provided an easy predictive tool for the optimum conditions to maximize the conversion. The simulation reported for WCK showed maximum conversion (96%) at 70 °C in 24 h with 18%wt NaOH.

Novel Inulin Derivatives Modified with Schiff Bases: Synthesis, Characterization, and Antifungal Activity

In this paper, we report chemical modifications of inulin by seven kinds of aromatic Schiff bases, which are different from their substituent groups. The obtained inulin derivatives were confirmed by FTIR, ¹H NMR, and ¹³C NMR. Then, we studied their antifungal activity against four kinds of plant pathogens involving Botrytis cinerea, Fusarium oxysporum f. sp. cucumerium Owen, Fusarium oxysporum f. sp. niveum, and Phomopsis asparagi by the mycelium growth rate method. The results revealed that all inulin derivatives were endowed with significant antifungal activity compared to inulin. Among them, 6-amino-(N-4-chlorobenzylidene)-6-deoxy-3,4-di-O-acetyl inulin (4CBSAIL) and 6-amino-(N-3,4-dichlorobenzylidene)-6-deoxy-3,4-di-O-acetyl inulin (3,4DCBSAIL), which were synthesized from p-chlorobenzaldehyde and 3,4-dichlorobenzaldehyde, could completely inhibit the growth of the test fungi at 1.0 mg/mL. The inhibitory indices of the inulin derivatives were related to the type, position, and number of substituent groups (halogens) on the Schiff bases. The results confirmed that it was feasible to chemically modify inulin with Schiff bases to confer high antifungal activity to inulin. The products described in this paper have great potential as alternatives to some harmful pesticides used for plant disease control.

Preparation, characterization and in vitro release study of drug-loaded sodium carboxy-methylcellulose/chitosan composite sponge

A sodium carboxy-methylcellulose (CMC)/chitosan (CS) composite sponge as drug carrier was prepared, and its structure and functions were investigated. Samples with different CMC/chitosan ratios and under different pH conditions were synthesized via a freeze-drying method. The microstructure of the dried sponges was analyzed by Scanning Electron Microscope (SEM). Molecule interactions between polymers were confirmed by Fourier transform infrared (FTIR) spectra and Thermal gravimetric analyze (TGA). The swelling degree, weight loss, in vitro drug release behavior and antibacterial property of the sponges were determined as well. The results showed that the CMC/chitosan ratio and the pH value significantly affected the appearance of the blending solution and the microstructure of the final product, and also affected the sponge’s degradation behavior, drug-loading capacity and the antibacterial activity. Gentamicin (GEN) as a hydrophilic model drug was remarkably superior to the other two hydrophobic drugs, ibuprofen (IBU) and roxithromycin (ROX), with respect to in vitro releasing. Moreover, higher CMC content and lower pH value of the sponge were confirmed to lead a larger loading for GEN. The bacteriostatic experiment showed a strong antimicrobial ability of GEN-loaded sponges on inhibiting Escherichia coli.

Synthesis of inulin derivatives with quaternary phosphonium salts and their antifungal activity

Inulin is a kind of renewable and biodegradable carbohydrate with good water solubility and numerous physiological functions. For further utilization of inulin, chemical modification can be applied to improve its bioactivities. In this paper, five novel inulin derivatives were synthesized via chemical modification with quaternary phosphonium salt. Their antifungal activity against three kinds of plant pathogens including Colletotrichum lagenarium, Phomopsis asparagi, and Fusarium oxysporum was assessed with radial growth assay in vitro. Results revealed that all the inulin derivatives exhibited improved antifungal activity compared with inulin. Particularly, inulin modified with triphenylphosphine (TPhPAIL) exhibited the best antifungal activity with inhibitory indices of 80.0%, 78.8%, and 87.4% against Colletotrichum lagenarium, Phomopsis asparagi, and Fusarium oxysporum at 1.0mg/mL respectively. The results clearly showed that chemical modification of inulin with quaternary phosphonium salt could efficiently improve derivatives' antifungal activity. Further analysis of results indicated that the antifungal activity was influenced by alkyl chain length or electron-withdrawing ability of the grafted quaternary phosphonium salts. Longer alkyl chain lengths or the stronger electron-withdrawing groups would lead to enhanced antifungal efficacy.