Improvement of silicate cement properties with bacterial cellulose powder addition for applications in dentistry

Comparative Evaluation of the Mechanical and Physical Properties of Mineral Trioxide Aggregate vs. Bacterial Cellulose Nanocrystal-Reinforced Mineral Trioxide Aggregate: An In Vitro Study

AIM

This study aims to compare and assess the compression strength, microhardness, and surface texture of two sets of materials: mineral trioxide aggregate (MTA) PlusTM and bacterial cellulose nanocrystal (BCNC)-reinforced MTA PlusTM.

MATERIALS AND METHODS

According to the ASTM E384 standard, the cylindrical molds made of plexiglass with an internal diameter of 6 mm and a height of 4 mm were fabricated using computer numerical control laser cutting. A total of 20 samples (n=10) in each group were considered in this experimental study: Group I (control group) MTA PlusTM (Prevest DenPro Limited, India) and Group II (experimental group) BCNC (Vedayukt India Private Limited, India)-reinforced MTA PlusTM. After preparation, the molds were incubated at 37°C in a fully saturated condition for about 24 hours, and then the compression strength, microhardness, and scanning electron microscopy analyses were performed at different magnifications. The obtained data were then statistically analyzed.

RESULTS

Quantitative analysis revealed that there is a statistically significant difference between MTA PlusTM and BCNC-reinforced MTA PlusTM  (p<0.002). The Wilcoxon signed-rank test and Mann-Whitney U-test revealed that BCNC-reinforced MTA PlusTM  showed significantly higher compression strength (33.80±3.83 MPa, p=0.00) and surface microhardness (642.85±24.00 μm, p=0.00) than the control group.

CONCLUSION

Based on our findings, it was concluded that there is a statistically significant difference between both study groups. Thus, incorporating BCNC into the MTA PlusTM  significantly increased the compression strength and surface microhardness of the MTA PlusTM cement.

CLINICAL SIGNIFICANCE

Numerous dental applications have been investigated for bacterial cellulose. Many benefits of bacterial cellulose are available, which include its effects on moldability, low cost, high water retention capacity, biocompatibility, and biodegradability. Furthermore, the addition of BCNC to MTA PlusTM  accelerates the material's hardening process and decreases its setting time, which in turn shortens clinical chairside procedural timing and thereby improves patient satisfaction.

Applications of selected polysaccharides and proteins in dentistry: A review

In the last ten years, remarkable characteristics and a variety of functionalities have been created in biopolymeric materials for clinical dental applications. This review gives an overview of current knowledge of natural biopolymers (biological macromolecules) in terms of structural, functional, and property interactions. Natural biopolymers such as polysaccharides (chitosan, bacterial cellulose, hyaluronic acid, and alginate) and polypeptides (collagen and silk fibroin) have been discussed for dental uses. These biopolymers exhibit excellent properties alone and when employed with other composite molecules making them ideal for treatment of periodontitis, endodontics, dental pulp regeneration and oral wound healing. These biopolymers together with the composite materials exhibit better biocompatibility, inertness, elasticity and flexibility which makes them a leading candidate to be used for other dental applications like caries management, oral appliances, dentures, dental implants and oral surgeries.

Preparation of bacterial cellulose-based antibacterial membranes with prolonged release of drugs: Emphasis on the chemical structure of drugs

Bacterial cellulose (BC) based antibacterial membranes were synthesized, including BC-cefoperazone (BC-CEF) and BC-cefoperazone sodium (BC-CEF/Na). To examine the various drug loading processes, the structure, morphology, and physical-chemical characteristics of membranes were evaluated. Results demonstrated that both types of medicines were successfully absorbed into membranes, and membranes displayed identical morphology and FT-IR peaks. BC-CEF showed lower crystalline of XRD, which was likely caused by the combination of carboxyl and hydroxyl. However, there were no drug peaks seen in the membranes, indicating no alteration of ribbon crystallization of BC. Two types of antibacterial membranes have significantly distinct drug-loading traits and drug-releasing profiles. The drug loading rate of CEF (46.4 mg/g) was significantly greater than CEF/Na (30.3 mg/g). The cumulative drug-releasing profiles showed that only BC-CEF continues to release drugs for a lengthy period up to 48 h and exhibited good antimicrobial activity against S. aureus and E. coli until 48 h. The cytotoxicity assay demonstrated the great biocompatibility of all membranes. Findings indicated that BC-CEF has the potential use as a prolonged biocide in the biomedical. The idea that BC membranes can naturally incorporate the carboxyl groups from antibiotics is also innovative and can be useful in developing of drug delivery systems.

Current application and modification strategy of marine polysaccharides in tissue regeneration: A review

Marine polysaccharides (MPs) are exceptional bioactive materials that possess unique biochemical mechanisms and pharmacological stability, making them ideal for various tissue engineering applications. Certain MPs, including agarose, alginate, carrageenan, chitosan, and glucan have been successfully employed as biological scaffolds in animal studies. As carriers of signaling molecules, scaffolds can enhance the adhesion, growth, and differentiation of somatic cells, thereby significantly improving the tissue regeneration process. However, the biological benefits of pure MPs composite scaffold are limited. Therefore, physical, chemical, enzyme modification and other methods are employed to expand its efficacy. Chemically, the structural properties of MPs scaffolds can be altered through modifications to functional groups or molecular weight reduction, thereby enhancing their biological activities. Physically, MPs hydrogels and sponges emulate the natural extracellular matrix, creating a more conducive environment for tissue repair. The porosity and high permeability of MPs membranes and nanomaterials expedite wound healing. This review explores the distinctive properties and applications of select MPs in tissue regeneration, highlighting their structural versatility and biological applicability. Additionally, we provide a brief overview of common modification strategies employed for MP scaffolds. In conclusion, MPs have significant potential and are expected to be a novel regenerative material for tissue engineering.

Engineering Dental Tissues Using Biomaterials with Piezoelectric Effect: Current Progress and Future Perspectives

Dental caries and traumatic injuries to teeth may cause irreversible inflammation and eventual death of the dental pulp. Nevertheless, predictably, repair and regeneration of the dentin-pulp complex remain a formidable challenge. In recent years, smart multifunctional materials with antimicrobial, anti-inflammatory, and pro-regenerative properties have emerged as promising approaches to meet this critical clinical need. As a unique class of smart materials, piezoelectric materials have an unprecedented advantage over other stimuli-responsive materials due to their inherent capability to generate electric charges, which have been shown to facilitate both antimicrobial action and tissue regeneration. Nonetheless, studies on piezoelectric biomaterials in the repair and regeneration of the dentin-pulp complex remain limited. In this review, we summarize the biomedical applications of piezoelectric biomaterials in dental applications and elucidate the underlying molecular mechanisms contributing to the biological effect of piezoelectricity. Moreover, we highlight how this state-of-the-art can be further exploited in the future for dental tissue engineering.

The applications of polysaccharides in dentistry

Polysaccharides are natural polymers widely present in animals, plants, and several microorganisms. Polysaccharides have remarkable properties, including easy extractions, degradability, and renewability, and have no apparent toxicity, making them ideal for biomedical applications. Moreover, polysaccharides are suitable for repairing oral tissue defects and treating oral diseases due to their excellent biocompatibility, biosafety, anti-inflammatory, and antibacterial properties. The oral cavity is a relatively complex environment vulnerable to numerous conditions, including soft tissue diseases, hard tissue disorders, and as well as soft and hard tissue diseases, all of which are complex to treat. In this article, we reviewed different structures of natural polysaccharides with high commercial values and their applications in treating various oral disease, such as drug delivery, tissue regeneration, material modification, and tissue repair.

Bacterial cellulose as a potential biopolymer in biomedical applications: a state-of-the-art review

Throughout history, natural biomaterials have benefited society. Nevertheless, in recent years, tailoring natural materials for diverse biomedical applications accompanied with sustainability has become the focus. With the progress in the field of materials science, novel approaches for the production, processing, and functionalization of biomaterials to obtain specific architectures have become achievable. This review highlights an immensely adaptable natural biomaterial, bacterial cellulose (BC). BC is an emerging sustainable biopolymer with immense potential in the biomedical field due to its unique physical properties such as flexibility, high porosity, good water holding capacity, and small size; chemical properties such as high crystallinity, foldability, high purity, high polymerization degree, and easy modification; and biological characteristics such as biodegradability, biocompatibility, excellent biological affinity, and non-biotoxicity. The structure of BC consists of glucose monomer units polymerized via cellulose synthase in β-1-4 glucan chains, creating BC nano fibrillar bundles with a uniaxial orientation. BC-based composites have been extensively investigated for diverse biomedical applications due to their similarity to the extracellular matrix structure. The recent progress in nanotechnology allows the further modification of BC, producing novel BC-based biomaterials for various applications. In this review, we strengthen the existing knowledge on the production of BC and BC composites and their unique properties, and highlight the most recent advances, focusing mainly on the delivery of active pharmaceutical compounds, tissue engineering, and wound healing. Further, we endeavor to present the challenges and prospects for BC-associated composites for their application in the biomedical field.

Recent Advances in Development of Natural Cellulosic Non-Woven Scaffolds for Tissue Engineering

In recent years, tissue engineering researchers have exploited a variety of biomaterials that can potentially mimic the extracellular matrix (ECM) for tissue regeneration. Natural cellulose, mainly obtained from bacterial (BC) and plant-based (PC) sources, can serve as a high-potential scaffold material for different regenerative purposes. Natural cellulose has drawn the attention of researchers due to its advantages over synthetic cellulose including its availability, cost effectiveness, perfusability, biocompatibility, negligible toxicity, mild immune response, and imitation of native tissues. In this article, we review recent in vivo and in vitro studies which aimed to assess the potential of natural cellulose for the purpose of soft (skin, heart, vein, nerve, etc.) and hard (bone and tooth) tissue engineering. Based on the current research progress report, it is sensible to conclude that this emerging field of study is yet to satisfy the clinical translation criteria, though reaching that level of application does not seem far-fetched.

Efficacy of Bacterial Nanocellulose in Hard Tissue Regeneration: A Review

Bacterial nanocellulose (BNC, as exopolysaccharide) synthesized by some specific bacteria strains is a fascinating biopolymer composed of the three-dimensional pure cellulosic nanofibrous matrix without containing lignin, hemicellulose, pectin, and other impurities as in plant-based cellulose. Due to its excellent biocompatibility (in vitro and in vivo), high water-holding capacity, flexibility, high mechanical properties, and a large number of hydroxyl groups that are most similar characteristics of native tissues, BNC has shown great potential in tissue engineering applications. This review focuses on and discusses the efficacy of BNC- or BNC-based biomaterials for hard tissue regeneration. In this review, we provide brief information on the key aspects of synthesis and properties of BNC, including solubility, biodegradability, thermal stability, antimicrobial ability, toxicity, and cellular response. Further, modification approaches are discussed briefly to improve the properties of BNC or BNC-based structures. In addition, various biomaterials by using BNC (as sacrificial template or matrix) or BNC in conjugation with polymers and/or fillers are reviewed and discussed for dental and bone tissue engineering applications. Moreover, the conclusion with perspective for future research directions of using BNC for hard tissue regeneration is briefly discussed.

Bacterial Nanocellulose in Dentistry: Perspectives and Challenges

Bacterial cellulose (BC) is a natural polymer that has fascinating attributes, such as biocompatibility, low cost, and ease of processing, being considered a very interesting biomaterial due to its options for moldability and combination. Thus, BC-based compounds (for example, BC/collagen, BC/gelatin, BC/fibroin, BC/chitosan, etc.) have improved properties and/or functionality, allowing for various biomedical applications, such as artificial blood vessels and microvessels, artificial skin, and wounds dressing among others. Despite the wide applicability in biomedicine and tissue engineering, there is a lack of updated scientific reports on applications related to dentistry, since BC has great potential for this. It has been used mainly in the regeneration of periodontal tissue, surgical dressings, intraoral wounds, and also in the regeneration of pulp tissue. This review describes the properties and advantages of some BC studies focused on dental and oral applications, including the design of implants, scaffolds, and wound-dressing materials, as well as carriers for drug delivery in dentistry. Aligned to the current trends and biotechnology evolutions, BC-based nanocomposites offer a great field to be explored and other novel features can be expected in relation to oral and bone tissue repair in the near future.

Bacterial Cellulose as a Versatile Platform for Research and Development of Biomedical Materials

The unique pool of features found in intracellular and extracellular bacterial biopolymers attracts a lot of research, with bacterial cellulose (BC) being one of the most versatile and common. BC is an exopolysaccharide consisting solely of cellulose, and the variation in the production process can vary its shape or even its composition when compounding is applied in situ. Together with ex situ modification pathways, including specialised polymers, particles or exclusively functional groups, BC provides a robust platform that yields complex multifunctional compounds that go far beyond ultra-high purity, intrinsic hydrophilicity, mechanical strength and biocompatibility to introduce bioactive, (pH, thermal, electro) responsive, conductive and ‘smart’ properties. This review summarises the research outcomes in BC-medical applications, focusing mainly on data from the past decade (i.e., 2010–2020), with special emphasis on BC nanocomposites as materials and devices applicable in medicine. The high purity and unique structural/mechanical features, in addition to its capacity to closely adhere to irregular skin surfaces, skin tolerance, and demonstrated efficacy in wound healing, all stand as valuable attributes advantageous in topical drug delivery. Numerous studies prove BC compatibility with various human cells, with modifications even improving cell affinity and viability. Even BC represents a physical barrier that can reduce the penetration of bacteria into the tissue, but in its native form does not exhibit antimicrobial properties, therefore carious modifications have been made or specific compounds added to confer antimicrobial or anti-inflammatory properties. Progress in the use of BC-compounds as wound dressings, vascular grafts, and scaffolds for the treatment of cartilage, bone and osteochondral defects, the role as a basement membrane in blood-brain barrier models and many more are discussed to particular extent, emphasising the need for BC compounding to meet specific requirements.

Electrospun Fibre Webs Templated Synthesis of Mineral Scaffolds Based on Calcium Phosphates and Barium Titanate

The current work focuses on the development of mineral scaffolds with complex composition and controlled morphology by using a polymeric template in the form of nonwoven fibre webs fabricated through electrospinning. By a cross-linking process, gelatine fibres stable in aqueous solutions were achieved, these being further subjected to a loading step with two types of mineral phases: calcium phosphates deposited by chemical reaction and barium titanate nanoparticles as decoration on the previously achieved structures. Thus, hybrid materials were obtained and subsequently processed in terms of freeze-drying and heat treating with the purpose of burning the template and consolidating the mineral part as potential bone implants with improved biological response by external stimulation. The results confirmed the tunable morphology, as well as the considerable applicability of both as-prepared and final samples for the development of medical devices, which encourages the continuation of research in the direction of assessing the synergistic contribution of barium titanate domains polarisation/magnetisation by external applied fields.

Functionalized Bacterial Cellulose Microparticles for Drug Delivery in Biomedical Applications

Background:

Bacterial cellulose (BC) has recently attained greater interest in various research fields, including drug delivery for biomedical applications. BC has been studied in the field of drug delivery, such as tablet coating, controlled release systems and prodrug design.

Objective:

In the current work, we tested the feasibility of BC as a drug carrier in microparticulate form for potential pharmaceutical and biomedical applications.

Method :

For this purpose, drug-loaded BC microparticles were prepared by simple grinding and injection moulding method through regeneration. Model drugs, i.e., cloxacillin (CLX) and cefuroxime (CEF) sodium salts were loaded in these microparticles to assess their drug loading and release properties. The prepared microparticles were evaluated in terms of particle shapes, drug loading efficiency, physical state of the loaded drug, drug release behaviour and antibacterial properties.

Results:

The BC microparticles were converted to partially amorphous state after regeneration. Moreover, the loaded drug was transformed into the amorphous state. The results of scanning electron microscopy (SEM) showed that microparticles had almost spherical shape with a size of ca. 350-400 μm. The microparticles treated with higher drug concentration (3%) exhibited higher drug loading. Keeping drug concertation constant, i.e., 1%, the regenerated BC (RBC) microparticles showed higher drug loading (i.e., 37.57±0.22% for CEF and 33.36±3.03% for CLX) as compared to as-synthesized BC (ABC) microparticles (i.e., 9.46±1.30% for CEF and 9.84±1.26% for CLX). All formulations showed immediate drug release, wherein more than 85% drug was released in the initial 30 min. Moreover, such microparticles exhibited good antibacterial activity with larger zones of inhibition for drug loaded RBC microparticles as compared to corresponding ABC microparticles.

Conclusion :

Drug loaded BC microparticles with immediate release behaviour and antibacterial activity were fabricated. Such functionalized microparticles may find potential biomedical and pharmaceutical applications.

New carbon/ZnO/Li2O nanocomposites with enhanced photocatalytic activity

Our study was focused on the synthesis of photocatalytic materials for the degradation of organic dyes based on the valorization of biomass resources. The biochar resulted from pyrolysis process of cherry pits wastes was activated by CO₂ flow. Activated and inactivated carbon was used to obtain carbon-based photocatalysts impregnated with different zinc salt precursors. The activation of carbon had no significant influence on the photodegradation process. The doping procedure used Li₂CO₃ and Zn(CH₃COO)₂ of different concentrations to impregnate the biochar. The carbon-ZnO-Li₂O based nanomaterials were analysed by TEM and SEM, while the presence of hexagonal wurtzite ZnO was investigated by XRD. The solid samples were analysed by PL at 360 nm excitation fixed wavelength to correlate their morphology with the optical and photocatalytic properties. The presence of Li atoms led to photocatalytic activities of the doped ZnO similar to the undoped ZnO obtained at higher concentrations of zinc acetate precursor.

Latest Advances on Bacterial Cellulose-Based Materials for Wound Healing, Delivery Systems, and Tissue Engineering

Bacterial cellulose (BC) is a nanocellulose form produced by some nonpathogenic bacteria. BC presents unique physical, chemical, and biological properties that make it a very versatile material and has found application in several fields, namely in food industry, cosmetics, and biomedicine. This review overviews the latest state-of-the-art usage of BC on three important areas of the biomedical field, namely delivery systems, wound dressing and healing materials, and tissue engineering for regenerative medicine. BC will be reviewed as a promising biopolymer for the design and development of innovative materials for the mentioned applications. Overall, BC is shown to be an effective and versatile carrier for delivery systems, a safe and multicustomizable patch or graft for wound dressing and healing applications, and a material that can be further tuned to better adjust for each tissue engineering application, by using different methods.