Urea free synthesis of chitin-based acrylate superabsorbent polymers under homogeneous conditions: Effects of the degree of deacetylation and the molecular weight

Update on Chitin and Chitosan from Insects: Sources, Production, Characterization, and Biomedical Applications

Insects, renowned for their abundant and renewable biomass, stand at the forefront of biomimicry-inspired research and offer promising alternatives for chitin and chitosan production considering mounting environmental concerns and the inherent limitations of conventional sources. This comprehensive review provides a meticulous exploration of the current state of insect-derived chitin and chitosan, focusing on their sources, production methods, characterization, physical and chemical properties, and emerging biomedical applications. Abundant insect sources of chitin and chitosan, from the Lepidoptera, Coleoptera, Orthoptera, Hymenoptera, Diptera, Hemiptera, Dictyoptera, Odonata, and Ephemeroptera orders, were comprehensively summarized. A variety of characterization techniques, including spectroscopy, chromatography, and microscopy, were used to reveal their physical and chemical properties like molecular weight, degree of deacetylation, and crystallinity, laying a solid foundation for their wide application, especially for the biomimetic design process. The examination of insect-derived chitin and chitosan extends into a wide realm of biomedical applications, highlighting their unique advantages in wound healing, tissue engineering, drug delivery, and antimicrobial therapies. Their intrinsic biocompatibility and antimicrobial properties position them as promising candidates for innovative solutions in diverse medical interventions.

Chitin and chitosan from mushroom (Agaricus bisporus) using deep eutectic solvents

In this study, chitin was isolated from a mushroom (Agaricus bisporus) using deep eutectic solvents, choline chloride: acetic acid (CCAA), choline chloride:lactic acid (CCLA) and choline chloride:glycerol (CCG). According to the results, three DES systems were also useful for the isolation of chitin from mushrooms. The deproteinization efficiency was 84.25 %. The degree of deacetylation of chitin isolated by microwave-assisted extraction using CCAA was 69 %. This result was promising to produce chitosan in a one-step, base-free process using deep eutectic solvents. FTIR, XRD, SEM and XPS were used to analyse the physicochemical properties of the chitin.

Insights into the relationships of modifying methods, structure, functional properties and applications of chitin: A review

Chitin as the second plentiful polysaccharide has arouse widely attention due to its remarkable availability and biocompatibility. While the strong inter/intra molecular hydrogen bonds and crystallinity severely restrict its applications. Recently, multiple emerging technologies are increasingly used to modify chitin structure for the sake of obtaining excellent functional properties, as well as broadening the corresponding applications. Firstly, this review systematically outlines the features of single and combined methods for chitin modification. Then, the impacts of various modifying methods on the structural characteristics of chitin, including molecular weight, degree of acetylation and functional groups, are further summarized. In addition, the effects of these structural characteristics on the functional properties as well as its potential related applications are illustrated. The conclusion of this review provides better understanding of the relationships among the modifying methods, structure, properties and applications, contributing to chitin modification for the targeted purpose in the future study.

Synthesis, Characterization, and Swelling Properties of a New Highly Absorbent Hydrogel Based on Carboxymethyl Guar Gum Reinforced with Bentonite and Silica Particles for Disposable Hygiene Products

Superabsorbent polymers derived from petroleum have been widely used as the primary component of high-water-absorption disposable sanitary products. However, environmental concerns as well as unstable market prices influence the quality of disposable hygiene products. The development of superabsorbent polymers from natural, non-petroleum-derived materials has become more predominant. In the present study, two borax-cross-linked carboxymethyl guar-based superabsorbents with bentonite (CMG-Bt) and fumed silica particle reinforcement (CMG-Bt-Si) were synthesized. The materials have been fully characterized by various techniques. The swelling behavior was studied through free swelling capacity (FSC) and centrifuge retention capacity (CRC). The swelling kinetics and urea absorption capacity were further analyzed. The effects of the cross-linking ratio, mineral clay, silica particles, and pH of the liquids on the swelling properties of the superabsorbents have been studied. The incorporation of silica particles demonstrated a positive effect on water uptake reaching 78.63 and 41.09 g/g of FSC and CRC, respectively, at an optimum pH of 6.8. The optimum swelling kinetics were attributed to CMG-Bt-Si of 5 wt % silica particle content, indicating a velocity parameter (ζ) of 41 s in saline solution. Finally, the highest swelling values were obtained at 10, 10, and 5 wt % for the cross-linking ratio, bentonite content, and silica particle content, respectively; in addition, the absorption of urea by the CMG-Bt-Si material was also confirmed.

Computational Approach to the Surface-Crosslinking Process of Superabsorbent Polymer via Central Composite Design

The improvement of gel strength and absorption properties through the surface-crosslinking of superabsorbent polymers (SAPs) is essential for sanitary industry applications. We prepared core-SAP via aqueous solution copolymerization, and then surface-crosslinked the core-SAP under various conditions. The structure of the SAP was characterized using Fourier transform infrared (FT-IR) spectroscopy. Central composite design (CCD) of response surface methodology (RSM) has been applied to determine the optimum surface-crosslinking conditions such as surface-crosslinker content, reaction temperature, and reaction time. The optimal surface-crosslinking conditions were identified at a surface-crosslinker content of 2.22 mol%, reaction temperature of 160 °C, and reaction time of 8.7 min. The surface-crosslinked SAP showed excellent absorbency under load of 50 g/g with a permeability of 50 s. Other absorption properties were also evaluated by measuring the free absorbency and centrifuge retention capacity in saline solution.

Preparation and Enzyme Degradability of Spherical and Water-Absorbent Gels from Sodium Carboxymethyl Cellulose

To synthesize a biodegradable alternative to spherical polyacrylic acid absorbent resin, spherical hydrogel particles were prepared from carboxymethyl cellulose (CMC) dissolved in an aqueous solution, using ethylene glycol diglycidyl ether (EGDE) as a crosslinking agent. The effect of varying the initial CMC concentration and feed amount of EGDE on the shape, water absorbency, water-holding capacity, and enzyme degradability of the resultant CMC hydrogels was determined. The reaction solution was poured into fluid paraffin, and spherical hydrogel particles were obtained via the shear force from stirring. The shape and diameter of the spherical hydrogel particles in the swollen state depended on the CMC concentration. The spherical hydrogel particles obtained by increasing the amount of EGDE resulted in a decrease in absorbency. Additionally, all the spherical hydrogel particles were degraded by cellulase. Thus, spherical biodegradable hydrogel particles were prepared from CMC, and the particle size and water absorption of the hydrogel could be controlled in the range of 5–18 mm and 30–90 g·g⁻¹ in the swollen state, respectively. As an alternative to conventional superabsorbent polymers, the spherical CMC hydrogels are likely to be useful in industrial and agricultural applications.

Adsorption of copper (II) and cadmium (II) ions by in situ doped nano-calcium carbonate high-intensity chitin hydrogels

Most natural polymers exhibit limited functional groups, which is not favourable for the adsorption of various ions and their utilisation. To overcome this drawback, a novel in-situ-doped nano-calcium carbonate (CaCO₃) chitin hydrogel was synthesised as an efficient adsorbent for Cu (II) and Cd (II) ions. Scanning electron microscopy and Brunauer-Emmett-Teller results revealed that the synthesised CaCO₃/chitin hydrogel exhibited loose macropores and mesopores. Subsequently, Fourier transform infrared, Raman, and X-ray diffraction characterisation characterisation proved that chitin was successfully doped with nano-CaCO₃. The mechanical properties of CaCO₃/chitin hydrogel were superior to those of the unmodified chitin hydrogel and could efficiently adsorb Cu (II) and Cd (II) ions in water. The effect of pH, initial concentration, adsorbent dosage, and temperature was assessed to determine the adsorption properties of the hydrogel. Under suitable experimental conditions, the maximum adsorption rate of the CaCO₃/chitin hydrogel was approximately 96%. The time-dependent adsorption kinetics followed a quasi-second order model, and the adsorption process followed the Langmuir model. The maximum adsorption capacities of Cu (II) and Cd (II) according to the Langmuir curve were 194.61 and 191.58 mg/g, respectively. Compared with the binary competitive system, the material exhibited a specific selectivity to the adsorption of Cu (II). X-ray photoelectron spectroscopy (XPS) revealed that nitrogen and oxygen atoms were involved in chelation with the metal ions. The successful compounding of calcium carbonate nanoparticles provided more active adsorption sites for the gel. The novel material exhibited excellent adsorption effects on Cu (II) and Cd (II) ions when applied to a water sample. Thus, the novel material exhibits excellent potential for application. The Cu (II) and Cd (II)ion removal efficiencies after five successive adsorption cycles were higher than 90%, which indicated that the composite material exhibited excellent stability and reproducibility.

Synthesis of Superabsorbent Polymer Hydrogels with Rapid Swelling: Effect of Reaction Medium Dosage and Polyvinylpyrrolidone on Water Absorption Rate

A superabsorbent polymer (SAP) was synthesized by solution polymerization. The influence of synthesis technology was studied and optimized, and FTIR, SEM, and TGA were used to characterize the structure and morphology of the material. Under the optimal synthesis conditions, the water absorption of the material can achieve about 80% of the saturation value in the first 20 min, and the material absorbs distilled water up to 2013 g/g. The SAP also has remarkable water retention and reswelling capability. The excellent performance makes it have a promising application in agriculture. In addition, the results show that the dosage of the reaction medium is a major factor for performance. Under the condition of the optimum value of other factors, the influence of the dosage of the reaction medium on water absorption can reach about 1000 g in distilled water.

Biosourced Polysaccharide-Based Superabsorbents

In the last decades, many studies have been conducted on new materials to meet a growing industrial demand and to move scientific research forward. Superabsorbents are good examples of materials that have generated special attention in many fields for their ability to absorb and retain water up to 1000 times of their dry weight. They found many applications in hygiene products and other products, for a fast growing market of USD 9.58 Billion in 2019. Most of them are composed of synthetic polymers, which are often not environmentally friendly. Therefore, natural superabsorbents and particularly those based on polysaccharides have received a recent increased interest for their biodegradability, biocompatibility, and renewability. This review focuses on polysaccharide-based superabsorbents, on their properties, synthesis methods, and characterization. Their potential applications in many fields, such as biomedical and hygiene, agriculture, water treatment, and the building sector, are also reported with an interest in products already marketed.

Preparation and characterization of novel mesoporous chitin blended MoO3-montmorillonite nanocomposite for Cu(II) and Pb(II) immobilization

A novel mesoporous chitin blended MoO₃-Montmorillonite nanocomposite was prepared through three-steps synthesis. First, chitin was extracted from prawn shell then MoO₃-MMT was prepared, and lastly, chitin was blended with MoO₃-MMT. Chitin-MoO₃-MMT was applied for the removal of Cu(II) and Pb(II) from wastewater. XRD characterization revealed MoO₃ solubility in MMT interlayers, SEM showed a nanocomposite formation with sharp nanorods like-structure and length ranging from 60 to 77.7 nm. FTIR exhibited fundamental changes in the surface functional groups after adsorption. XPS analysis before and after adsorption showed the domination of chemical bonding with N and O. N₂ adsorption-desorption isotherm displayed H₃-type hysteresis loop and a pore size diameter of 10.67 nm confirming the mesoporous nature. Adsorption efficiency was studied as a function of pH, time, metal concentration and adsorbent mass. Adsorption capacity (Q_e) values were 19.03 and 15.92 mg.g^-1 for Cu(II) and Pb(II) respectively. The metal surface coverage mapping was 1.87 × 10^¹⁹ and 4.34 × 10^¹⁸ atoms/m² for Cu(II) and Pb(II) respectively. Adsorption followed Langmuir isotherm and pseudo-second-order (PSO) kinetics suggesting a monolayer chemisorption domination. Intraparticle diffusion (IPD) model showed a boundary layer control. Thermodynamically, the adsorption was spontaneous and endothermic with activation energies 25.94 and 29.37 kJ.mol^-1 for Cu(II) and Pb(II) respectively.

In Vitro and in Vivo Studies of pH-Sensitive GHK-Cu-Incorporated Polyaspartic and Polyacrylic Acid Superabsorbent Polymer

The main aim of this study was to evaluate the in vitro and in vivo efficiency of the polyaspartic acid- and acrylic acid-based superabsorbent polymer. The synthesized polymer was first investigated to check the blood compatibility by protein adsorption and blood clotting tests. Further, the GHK-Cu peptide was incorporated within the polymer and release studies were performed to evaluate the drug-delivery efficiency of the superabsorbent polymer. The polymer with best peptide release results were further used for in vivo analysis for wound healing. The healing efficiency of polymer with and without peptide was analyzed using wound closure, biochemical assay, histopathological, and toxicity studies.

Effects of eco-friendly carbohydrate-based superabsorbent polymers on seed germination and seedling growth of maize

Desertification is the degradation of land in arid and semi-arid areas. Nowadays, lack of water and desertification are extreme problems for plant survival and growth in the arid and semi-arid areas of the world. It becomes increasingly important as to how to let the plant absorb moisture more effectively for keeping growth strong. We synthesized superabsorbent polymers (SAPs) with carbohydrate and characterized them by Fourier transform infrared spectra analyses, scanning electron microscopy and thermogravimetric/differential thermal analyses. Then, a completely randomized experiment was conducted to assess the effect of carbohydrate-based SAPs on seed germination and seedling growth of maize in an artificial climate chest. The results showed that adding an appropriate amount of SAPs could improve root length, shoot length, total biomass, germination potential and germination rate. It indicates that this SAP is not toxic to plants and can promote seed germination, and at the same time provides a possibility of replacing other substrates.