Carbon dioxide capture and conversion by an environmentally friendly chitosan based meso-tetrakis(4-sulfonatophenyl) porphyrin

Efficient CO2 adsorption using chitosan, graphene oxide, and zinc oxide composite

This study was deeply focused on developing a novel CTS/GO/ZnO composite as an efficient adsorbent for CO2 adsorption process. To do so, design of experiment (DOE) was done based on RSM-BBD technique and according to the DOE runs, various CTS/GO/ZnO samples were synthesized with different GO loading (in the range of 0 wt% to 20 wt%) and different ZnO nanoparticle's loading (in the range of 0 wt% to 20 wt%). A volumetric adsorption setup was used to investigate the effect of temperature (in the range of 25-65 °C) and pressure (in the range of 1-9 bar) on the obtained samples CO2 uptake capability. A quadratic model was developed based on the RSM-BBD method to predict the CO2 adsorption capacity of the composite sample within design space. In addition, CO2 adsorption process optimization was conducted and the optimum values of the GO, ZnO, temperature, and pressure were obtained around 23.8 wt%, 18.2 wt%, 30.1 °C, and 8.6 bar, respectively, with the highest CO2 uptake capacity of 470.43 mg/g. Moreover, isotherm and kinetic modeling of the CO2 uptake process were conducted and the Freundlich model (R2 = 0.99) and fractional order model (R2 = 0.99) were obtained as the most appropriate isotherm and kinetic models, respectively. Also, thermodynamic analysis of the adsorption was done and the ∆H°, ∆S°, and ∆G° values were obtained around - 19.121 kJ/mol, - 0.032 kJ/mol K, and - 9.608 kJ/mol, respectively, indicating exothermic, spontaneously, and physically adsorption of the CO2 molecules on the CTS/GO/ZnO composite's surface. Finally, a renewability study was conducted and a minor loss in the CO2 adsorption efficiency of about 4.35% was obtained after ten cycles, demonstrating the resulting adsorbent has good performance and robustness for industrial CO2 capture purposes.

Chitosan modified multi-walled carbon nanotubes and arginine aerogel for enhanced carbon capture

Global warming is emerging as a significant issue because of increasing CO2 levels in the atmosphere due to urbanization, industrialization, and fossil-fuel usage. Therefore, reducing atmospheric CO2 levels using new materials with high carbon capture capacity and efficient CO2 capture technologies is essential. Herein, we propose a hybrid chitosan (CS) aerogel containing multi-walled carbon nanotubes (MWCNTs) and an arginine (Arg) aerogel (CSCNTArg aerogel) for efficient carbon capture. This aerogel was successfully synthesized using a cross-linker reagent via step-freeze drying method. Fourier-transform infrared spectroscopy and X-ray diffraction analyses confirmed the successful grafting of CS, MWCNTs, and Arg onto the CSCNTArg aerogel. The thermogravimetric analysis (TGA) confirmed good thermal stability up to 500 °C of the as-developed aerogel. Field-emission scanning electron microscopy showed that the surface morphology of the CSCNTArg aerogel differed from that of CS, Arg, and MWCNTs with pores on their surfaces. N2 and CO2 adsorption-desorption studies on the CSCNTArg aerogel were performed using the Brunauer-Emmett-Teller method and TGA, respectively. The CSCNTArg aerogel showed a high adsorption capacity of approximately 5.00 mmol g-1 at 35 °C. Therefore, this new material may be useful for facilitating high-efficiency CO2 adsorption to reduce atmospheric carbon footprint.

Kinetics, Equilibrium, and Thermodynamics for Conjugation of Chitosan with Insulin-Mimetic [meso-Tetrakis(4-sulfonatophenyl)porphyrinato]oxovanadate(IV)(4-) in an Aqueous Solution

This study investigated the conjugation of chitosan with the insulin-mimetic [meso-tetrakis(4-sulfonatophenyl)porphyrinato]oxovanadate(IV)(4-), VO(tpps), in an aqueous medium as a function of conjugation time, VO(tpps) concentrations, and temperatures. To validate the synthesis of chitosan-VO(tpps) conjugate, UV-visible and Fourier transform infrared spectrophotometric techniques were utilized. Conjugate formation is ascribed to the electrostatic interaction between the NH3+ units of chitosan and the SO3- units of VO(tpps). Chitosan enhances the stability of VO(tpps) in an aqueous medium (pH 2.5). VO(tpps) conjugation with chitosan was best explained by pseudo-second-order kinetic and Langmuir isotherm models based on kinetic and isotherm studies. The Langmuir equation determined that the maximal ability of VO(tpps) conjugated with each gram of chitosan was 39.22 μmol at a solution temperature of 45 °C. Activation energy and thermodynamic studies (Ea: 8.78 kJ/mol, ΔG: -24.52 to -27.55 kJ/mol, ΔS: 204.22 J/(mol K), and ΔH: 37.30 kJ/mol) reveal that conjugation is endothermic and physical in nature. The discharge of VO(tpps) from conjugate was analyzed in freshly prepared 0.1 mol/L phosphate buffer (pH 7.4) at 37 °C. The release of VO(tpps) from the conjugate is a two-phase process best explained by the Higuchi model, according to a kinetic analysis of the release data. Taking into consideration all experimental findings, it is proposed that chitosan can be used to formulate both solid and liquid insulin-mimetic chitosan-VO(tpps) conjugates.

The Studies on Chitosan for Sustainable Development: A Bibliometric Analysis

Chitosan is a biocompatible polymer with vast applications in pharmacology, medicine, paper making, agriculture, and the food industry due to its low toxicity. Chitosan also plays an important role in the sustainable environment since chitosan is able to absorb greenhouse gases, harmful organic matter, and heavy ions. Therefore, this paper conducts a bibliometric analysis of chitosan for sustainable development using the Scopus database from 1976 to 2023. A performance analysis on the 8002 documents was performed with Harzing's Publish or Perish. Science mapping was conducted using VOSviewer. The annual publication on chitosan for sustainable development showed an upward trend in recent years as the annual publication peaked in 2022 with 1178 documents with most of the documents being articles and published in journals. Material science, chemistry, and engineering are tightly related subject areas. China had the highest publication of 1560 total documents while the United States had the most impactful publication with 55,019 total citations, 68.77 citations per document, 77.6 citations per cited document, h-index 110, and g-index of 211. India had the largest international collaboration with 572 total link strength. "International Journal of Biological Macromolecules", "Carbohydrate Polymers", and "Polymers" have been identified as the top three source titles that publish the most documents on chitosan for sustainable development. The emerging trends in chitosan on sustainable development focus on the application of chitosan as an antibacterial agent and biosorbent for contaminants, especially in water treatment.

Functionalized β-Cyclodextrins Catalyzed Environment-Friendly Cycloaddition of Carbon Dioxide and Epoxides

Ammonium, imidazole, or pyridinium functionalized β-cyclodextrins (β-CDs) were used as efficient one-component bifunctional catalysts for the coupling reaction of carbon dioxide (CO₂) and epoxide without the addition of solvent and metal. The influence of different catalysts and reaction parameters on the catalytic performance were examined in detail. Under optimal conditions, Im-CD1-I catalysts functionalized with imidazole groups were able to convert various epoxides into target products with high selectivity and good conversion rates. The one-component bifunctional catalysts can also be recovered easily by filtration and reused at least for five times with only slight decrease in catalytic performance. Finally, a possible process for hydroxyl group-assisted ring-opening of epoxide and functionalized group- induced activation of CO₂ was presented.

Unraveling Synergistic Redox Interactions in Tetraphenylporphyrin-Polyluminol-Carbon Nanotube Composite for Capacitive Charge Storage

Organic redox-active materials, combined with high-surface-area carbonaceous substrates, form sustainable and low-cost composites with greatly enhanced electrochemical charge storage capacities. The electrochemical capacitive behavior of a composite electrode containing tetraphenylporphyrin sulfonate (TPPS), Chemically polymerized luminol (CpLum), and carbon nanotubes (TPPS-CpLum-CNT) was studied and compared with individual TPPS-CNT and CpLum-CNT composites. The dual-layer TPPS-CpLum had a combined contribution to the electrochemical charge storage, which led to an increased volumetric capacitance over the bare CNT and individual TPPS-CNT and CpLum-CNT composites. The synergistic interactions in the composite enabled faster charge storage kinetics and great stability. Spectroscopic analyses revealed that TPPS and CpLum interact electronically through noncovalent π-π and van der Waals bonds, which facilitates the transfer of electrons during charge and discharge. The synergy in charge storage was confirmed by density functional theory computational analysis, which suggested favorable physisorption and interfacial electronic interactions for TPPS adsorbed to a CpLum-carbon substrate. The combined insights from experimental and computational characterizations show that superimposing redox-active organic layers can be an effective and sustainable approach to design and engineer the surface of carbonaceous materials for capacitive charge storage.

Enhancement in the active site exposure in a porphyrin-based PIL/graphene composite catalyst for the highly efficient conversion of CO2

Poly(ionic liquid)s (PILs) have gained widespread attention in recent years due to their excellent properties similar to both ionic liquids and polymers. However, their further applications are limited because abundant and flexible ions easily block nanopores in the PIL catalysts, thus blocking the active sites and ultimately leading to decreased catalytic activity. This work reports the synthesis of a PIL/graphene composite catalyst (iPOP-ZnTPy@GNFs) based on an in situ surface preparation strategy, which effectively controlled the particle size and dispersion state of ionic liquids. The iPOP-ZnTPy@GNFs exhibited a larger surface area and more exposed active sites, which intensified the catalytic activity in the CO₂ cycloaddition reaction with propylene oxide with almost double the reaction rate as compared to that of iPOP-ZnTPy-2 at 100 °C and S/C = 1000. As expected, the iPOP-ZnTPy@GNF catalyst efficiently converted epoxides to cyclic carbonates at room temperature or atmospheric pressure, which can significantly reduce the process cost. In addition, iPOP-ZnTPy@GNFs exhibited excellent broad substrate scope, catalytic diversity, and remarkable reusability. The reaction mechanism of CO₂ cycloaddition was studied via density functional theory calculations and was validated by experimental findings. This work provides a feasible method for improving the utilization of active sites in PILs as a highly robust catalyst for CO₂ cycloaddition and can be further extended to other types of catalytic reactions in practical applications.

The AEROPILs Generation: Novel Poly(Ionic Liquid)-Based Aerogels for CO2 Capture

CO₂ levels in the atmosphere are increasing exponentially. The current climate change effects motivate an urgent need for new and sustainable materials to capture CO₂. Porous materials are particularly interesting for processes that take place near atmospheric pressure. However, materials design should not only consider the morphology, but also the chemical identity of the CO₂ sorbent to enhance the affinity towards CO₂. Poly(ionic liquid)s (PILs) can enhance CO₂ sorption capacity, but tailoring the porosity is still a challenge. Aerogel’s properties grant production strategies that ensure a porosity control. In this work, we joined both worlds, PILs and aerogels, to produce a sustainable CO₂ sorbent. PIL-chitosan aerogels (AEROPILs) in the form of beads were successfully obtained with high porosity (94.6–97.0%) and surface areas (270–744 m²/g). AEROPILs were applied for the first time as CO₂ sorbents. The combination of PILs with chitosan aerogels generally increased the CO₂ sorption capability of these materials, being the maximum CO₂ capture capacity obtained (0.70 mmol g⁻¹, at 25 °C and 1 bar) for the CHT:P[DADMA]Cl_30%AEROPIL.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Synthesis of 2,5-furandicarboxylic acid-enriched-chitosan for anti-inflammatory and metal ion uptake

The main aim of the present study is to synthesize a hitherto unreported polymer of chitosan (CS) and 2,5-furandicarboxylic acid (FDCA) derived from renewable biomass resources. For this purpose, CS was chosen which had -NH₂ groups as abundant active sites. Synthesis of 2,5-furandicarboxylic acid-enriched-chitosan polymer (CS-FDCA) was carried out by reaction involving EDC-NHS coupling reagents. The structure of CS-FDCA polymer was confirmed by various characterization techniques such as Fourier-transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR), X-ray powder diffraction (XRD), high resolution-field emission scanning electron microscope (HR-FESEM), and thermogravimetric analysis (TGA). Moreover, CS and CS-FDCA were scrutinized to examine their efficacies towards ameliorate inflammation via detection of lipopolysaccharide (LPS) induced nitric oxide (NO) production. As compared to CS, CS-FDCA with low concentration (1.0 μM) exhibited the better efficacy to reduce the NO production. Furthermore, CS-FDCA polymer showed high as 12.6% of Cu²⁺ ion uptake while CS showed 9.2% of Cu²⁺ ion uptake. Overall, it can be inferred that CS-FDCA polymer is expected to be used for biomedical application and for the removal of metal contaminants from industrial wastewater.

Oxidative Hydroxylation of Aryl Boronic Acid Catalyzed by Co-porphyrin Complexes via Blue-Light Irradiation

Oxidative reactions often require unstable and environmentally harmful oxidants; therefore, the investigation of safer alternatives is urgent. Here, the hydroxylation of aryl boronic acid in the presence of Co-complexes is demonstrated. Tetrakis(4-carboxyphenyl) Co(II)-porphyrin was combined with biodegradable polymers such as chitosan catalyzed hydroxylation of phenyl boronic acids to form phenol derivatives under blue-light irradiation. This catalytic system can be used as an eco-friendly oxidation process that does not release oxidizing agents into the atmosphere.

The Application of Biomass-Based Catalytic Materials in the Synthesis of Cyclic Carbonates from CO2 and Epoxides

The synthesis of cyclic carbonates from carbon dioxide (CO2) and epoxides is a 100% atom economical reaction and an attractive pathway for CO2 utilisation. Because CO2 is a thermodynamically stable molecule, the use of catalysts is mandatory in reducing the activation energy of the CO2 conversion. Considering environmental compatibility and the high-efficiency catalytic conversion of CO2, there is the strong need to develop green catalysts. Biomass-based catalysts, a type of renewable resource, have attracted considerable attention due to their unique properties-non-toxic, low-cost, pollution-free, etc. In this review, recent advances in the development of biomass-based catalysts for the synthesis of cyclic carbonates by CO2 and epoxides coupling are summarized and discussed in detail. The effect of biomass-based catalysts, functional groups, reaction conditions, and co-catalysts on the catalytic efficiency and selectivity of synthesizing cyclic carbonates process is discussed. We intend to provide a comprehensive understanding of recent experimental and theoretical progress of CO2 and epoxides coupling reaction and pave the way for both CO2 conversion and biomass unitization.

Effect of CO adsorption on properties of transition metal doped porphyrin: A DFT and TD-DFT study

The structural, electronic and optical properties of transition metal doped porphyrin (TM@P; TM = Mn, Co, Fe, Cu, Ni, Zn) as well as the effect of CO adsorption on TM@P properties have been investigated using the density functional theory (DFT). The presented results include adsorption energies, bond lengths, electronic configurations, magnetic moments, density of states, frontier molecular orbitals, and UV-Vis. spectra. Our calculation results show that, the CO molecule favors to be adsorbed on TM-doped Porphyrin with its carbon head. The most energetically stable adsorption of CO is reported for Fe doped Porphyrin. The interaction between CO molecules with TM@P is attributed to donation-back donation as well as charge transfer mechanisms. Mn, Co and Fe-doped porphyrins have visible active nature which may be affected by CO adsorption, whereas, Ni, Cu and Zn-doped porphyrins have UV active nature which not affected by CO adsorption. These results may be meaningful for CO removal and detection.

Chitosan grafted graphene oxide aerogel: Synthesis, characterization and carbon dioxide capture study

We have demonstrated a superficial, environmentally friendly and sustainable development of chitosan (CS) grafted graphene oxide aerogels for adsorption of CO₂ gas. The CS is grafted into the carbonaceous materials like graphene oxide, multi-walled carbon nanotubes etc. to provide the large surface area, high porosity and a large number of amine group which facilitates the adsorption of CO₂ gas. CS and carbonaceous materials undergo crosslinking by using cross-linker reagents, and freeze-drying technique to yield CS based aerogels with ordered porous structures. Crosslinking between CS and carbonaceous materials was confirmed by FT-IR. Physical properties of the CS-based aerogels were studied using SEM, TGA, XRD, BET isotherm analysis. The adsorption capacity of CO₂ gas by CS grafted graphene oxide aerogels is around 0.257 mmol g^-1 at 1 bar, that is significantly higher in comparison to the adsorption capacity of pure CS. We believe that this study helps to reduce the cost of adsorbents due to the large availability of marine waste (CS) and thus aims to reduce the anthropogenic CO₂ gas at low cost, favourable temperature and pressure as compared to previously reported.