In situ doping enables the multifunctionalization of templately synthesized polyaniline@cellulose nanocomposites

Refining and in-situ growth of polyaniline endows the cellulose fibers with electrical stimulation sterilization

Bacteria and virus infections have posed a great threat to public health and personnel safety. For realizing rapid sterilization of the bacteria and virus, electrical stimulation sterilization was adopted to endow cellulose fibers with instantaneous antibacterial and antiviral properties. In the proposed strategy, the fiber is fluffed by mechanical refining, and then by means of the hydrogen bond between hydroxyl and aniline, the polyaniline (PANI) directionally grows vertically along the fine fibers via in-situ oxidative polymerization. Benefiting from the conductive polyaniline nanorod arrays on the fiber stem, the paper made from PANI modified refined fibers (PANI/BCF/P) exhibited excellent antibacterial and antiviral activity, the inhibition rates against S. aureus, E. coli, and bacteriophage MS2 can up to 100 %, 100 %, and 99.89 %, respectively when a weak voltage (2.5 V) was applied within 20 min. This study provides a feasible path for plant fiber to achieve efficient antibacterial and antiviral activity with electrical stimulation, which is of great significance for the preparation of electroactive antibacterial and antiviral green health products.

Hollow Superstructure In Situ Assembled by Single-Layer Janus Nanospheres toward Electromagnetic Shielding Flame-Retardant Polyurea Composites

A dodecahedral superstructure consisting of a single layer of Janus spheres containing ZIF-67 nanodots is prepared by in situ polymerization, with ZIF-67 and bio-based phytic acid (PA) as templates and dopants. It is used to improve the flame retardant, electromagnetic (EMI) shielding, and thermal conductivity properties of polyurea (PUA). By adding 5 wt% polyaniline@cobalt phytate-2.0 (PANI@Co-PA-2.0), the peak of heat release rate and the peak of smoke production rate are reduced by 54.9 and 59.9%, respectively. The peak of CO and CO2 production also decreased by 46.2 and 53.1%, respectively. A decrease in the absorption intensity of aliphatic and aromatic volatiles is also observed. The fire safety of PUA is greatly improved. In addition, PUA/PANI@Co-PA-2.0 exhibits an EMI shielding capability of 22.4 dB with the help of reduced graphene oxide, which confirms the possibility of PUA material application in the field of electromagnetic shielding. The 5 wt% filler increases the tensile strength of the PUA matrix to 6.3 MPa, and the composite material obtains good thermal conductivity. This work provides a viable method for the preparation of a flame-retardant, conductive, and electromagnetic refractory PUA substrate.

Polyaniline/Biopolymer Composite Systems for Humidity Sensor Applications: A Review

The development of polyaniline (PANI)/biomaterial composites as humidity sensor materials represents an emerging area of advanced materials with promising applications. The increasing attention to biopolymer materials as desiccants for humidity sensor components can be explained by their sustainability and propensity to absorb water. This review represents a literature survey, covering the last decade, which is focused on the interrelationship between the core properties and moisture responsiveness of multicomponent polymer/biomaterial composites. This contribution provides an overview of humidity-sensing materials and the corresponding sensors that emphasize the resistive (impedance) type of PANI devices. The key physicochemical properties that affect moisture sensitivity include the following: swelling, water vapor adsorption capacity, porosity, electrical conductivity, and enthalpies of adsorption and vaporization. Some key features of humidity-sensing materials involve the response time, recovery time, and hysteresis error. This work presents a discussion on various types of humidity-responsive composite materials that contain PANI and biopolymers, such as cellulose, chitosan and structurally related systems, along with a brief overview of carbonaceous and ceramic materials. The effect of additive components, such as polyvinyl alcohol (PVA), for film fabrication and their adsorption properties are also discussed. The mechanisms of hydration and proton transfer, as well as the relationship with conductivity is discussed. The literature survey on hydration reveals that the textural properties (surface area and pore structure) of a material, along with the hydrophile-lipophile balance (HLB) play a crucial role. The role of HLB is important in PANI/biopolymer materials for understanding hydration phenomena and hydrophobic effects. Fundamental aspects of hydration studies that are relevant to humidity sensor materials are reviewed. The experimental design of humidity sensor materials is described, and their relevant physicochemical characterization methods are covered, along with some perspectives on future directions in research on PANI-based humidity sensors.

Fabrication and charge storage capacitance of PPY/TiO2/PPY jacket nanotube array

A PPY/TiO2/PPY jacket nanotube array was fabricated by coating PPY layer on the external and internal surface of a tube wall-separated TiO2 nanotube array. It shows coaxial triple-walled nanotube structure with two PPY nanotube layers sandwiching one TiO2 nanotube layer. PPY/TiO2/PPY reveals much higher current response than TiO2. The theoretical calculation indicates PPY/TiO2/PPY reveals higher density of states and lower band gap, accordingly presenting higher conductivity and electroactivity, which is consistent with the experimental result of a higher current response. The electroactivity is highly enhanced in H2SO4 rather than Na2SO4 electrolyte due to feasible pronation process of PPY in an acidic solution. PPY/TiO2/PPY could conduct the redox reaction in H2SO4 electrolyte which involves the reversible protonation/deprotonation and HSO4 − doping/dedoping process and accordingly contributes to Faradaic pseudocapacitance. The specific capacitance is highly enhanced from 1.7 mF cm−2 of TiO2 to 123.4 mF cm−2 of PPY/TiO2/PPY at 0.1 mA cm−2 in H2SO4 electrolyte. The capacitance also declines from 123.4 to 31.7 mF cm−2 when the current density increases from 0.1 to 1 mA cm−2, presenting the rate capacitance retention of 26.7% due to the semiconductivity of TiO2. A PPY/TiO2/PPY jacket nanotube with high charge storage capacitance is regarded as a promising supercapacitor electrode material.

Lightweight aerogels based on bacterial cellulose/silver nanoparticles/polyaniline with tuning morphology of polyaniline and application in soft tissue engineering

Herein, polyaniline (PANI) with tuning morphology was in-situ synthesized within bacterial cellulose (BC)/silver nanoparticles hydrogels (AgNPs) that were prepared by green hydrothermal reduction method in different molarity of 0.01 and 0.25 of HCl solution along with the presence of polyethylene glycol (PEG). The synthesis of PANI in the presence of PEG in 0.01 M HCl led to the formation of rose-like morphology within nanocomposite aerogels with a size of 1.5-5.2 μm. All aerogels had the porosity and shrinkage of higher than 80% and lower than 10%, respectively. Rheology results showed a higher value of storage modulus (G') than that of loss modulus (G″) for all samples over the whole frequency regime. It confirmed by the loss factor (tan δ) value of less than 1 for all hydrogel samples. The synthesis of PANI within BC/Ag in 0.25 M of HCl solution resulted in a substantial rise of G' to nearly 1.5 × 10⁴ Pa that was one order of magnitude higher than that of other hydrogels. However, the synthesis condition of PANI did not influence the antibacterial activity. In spite of unfavorable cell attachment onto nanocomposite aerogels, the cell proliferation increased steadily over the whole period of incubation.

Cellulose-Based Hydrogels with Controllable Electrical and Mechanical Properties

Electrically conductive cellulose-based hydrogels are prepared by a facile and environmentally friendly method, of which the electrical and mechanical properties can be easily controlled by varying the graphene loading. With an ultralow initial addition of graphene oxide (GO, 0.2 wt% versus the mass of cellulose), the resulting cellulose/reduced graphene oxide (CG0.2) hydrogel shows a significantly enhanced compressive modulus of 332.01 kPa, 54.8% higher than that of pure cellulose hydrogel. Further increasing the addition of GO to 2 wt% (versus the mass of cellulose), the electrical conductivity of the resultant CG2.0 hydrogel is as high as 7.3×10−3 S/m, 10,000-fold higher than that of pure cellulose hydrogel, and of which the mechanical properties are also enhanced. These cellulose-based hydrogels with controllable electrical and mechanical properties have a great potential for application in drug delivery and artificial muscle.